boegelbot/GStreamer-1.24.4-GCC-13.2.0_partial.log

## GStreamer-1.24.4-GCC-13.2.0_partial.log
== 2024-07-03 03:55:25,342 easyblock.py:313 INFO This is EasyBuild 4.9.3.dev0-r52e3c0d242a53dedd12ecc95451026cc6cf0dba3 (framework: 4.9.3.dev0-r33a5030339ff3fa37ab308fe562e051387080243, easyblocks: 4.9.3.dev0-r52e3c0d242a53dedd12ecc95451026cc6cf0dba3) on host cns1.
== 2024-07-03 03:55:25,342 easyblock.py:319 INFO This is easyblock MesonNinja from module easybuild.easyblocks.generic.mesonninja (/home/boegelbot/easybuild/easybuild-easyblocks/easybuild/easyblocks/generic/mesonninja.py)
== 2024-07-03 03:55:25,342 easyblock.py:1058 INFO Build dir set to /tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0
== 2024-07-03 03:55:25,343 config.py:700 DEBUG software install path as specified by 'installpath' and 'subdir_software': /project/boegelbot/Rocky8/haswell/software
== 2024-07-03 03:55:25,343 easyconfig.py:2655 DEBUG Determining software installation subdir for GStreamer EasyConfig @ /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.24.4-GCC-13.2.0.eb
== 2024-07-03 03:55:25,343 easyconfig.py:2658 DEBUG Using fixed naming software installation subdir: GStreamer/1.24.4-GCC-13.2.0
== 2024-07-03 03:55:25,343 easyblock.py:1115 INFO Software install dir set to /project/boegelbot/Rocky8/haswell/software/GStreamer/1.24.4-GCC-13.2.0
== 2024-07-03 03:55:25,343 config.py:700 DEBUG modules install path as specified by 'installpath' and 'subdir_modules': /project/boegelbot/Rocky8/haswell/modules
== 2024-07-03 03:55:25,343 easyblock.py:1120 INFO Module install dir set to /project/boegelbot/Rocky8/haswell/modules/all
== 2024-07-03 03:55:25,343 easyblock.py:288 INFO Init completed for application name GStreamer version 1.24.4
== 2024-07-03 03:55:25,343 easyblock.py:4230 INFO Obtained application instance of for GStreamer (easyblock: MesonNinja)
== 2024-07-03 03:55:25,343 easyblock.py:4243 DEBUG Skip set to False
== 2024-07-03 03:55:25,344 easyconfig.py:1702 INFO Generating template values...
== 2024-07-03 03:55:25,344 templates.py:201 DEBUG config: GStreamer EasyConfig @ /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.24.4-GCC-13.2.0.eb
== 2024-07-03 03:55:25,344 templates.py:231 DEBUG version found in easyconfig is 1.24.4
== 2024-07-03 03:55:25,344 templates.py:333 DEBUG name: bitbucket_account, config: %(namelower)s
== 2024-07-03 03:55:25,344 templates.py:333 DEBUG name: github_account, config: %(namelower)s
== 2024-07-03 03:55:25,344 templates.py:333 DEBUG name: name, config: GStreamer
== 2024-07-03 03:55:25,344 templates.py:333 DEBUG name: parallel, config: None
== 2024-07-03 03:55:25,344 templates.py:333 DEBUG name: version, config: 1.24.4
== 2024-07-03 03:55:25,345 templates.py:333 DEBUG name: versionsuffix, config:
== 2024-07-03 03:55:25,345 templates.py:333 DEBUG name: versionprefix, config:
== 2024-07-03 03:55:25,345 easyconfig.py:1721 INFO Template values: arch='x86_64', bitbucket_account='gstreamer', cuda_cc_cmake='70', cuda_cc_semicolon_sep='7.0', cuda_cc_space_sep='7.0', cuda_compute_capabilities='7.0', cuda_sm_comma_sep='sm_70', cuda_sm_space_sep='sm_70', github_account='gstreamer', module_name='GStreamer/1.24.4-GCC-13.2.0', name='GStreamer', nameletter='G', nameletterlower='g', namelower='gstreamer', perlmajver='5', perlminver='38', perlshortver='5.38', perlver='5.38.0', pymajver='3', pyminver='11', pyshortver='3.11', pyver='3.11.5', sysroot='', toolchain_name='GCC', toolchain_version='13.2.0', version='1.24.4', version_major='1', version_major_minor='1.24', version_minor='24', versionprefix='', versionsuffix=''
== 2024-07-03 03:55:25,345 one.py:150 DEBUG Not copying '__builtins__' variable from parsed easyconfig
== 2024-07-03 03:55:25,346 one.py:529 DEBUG Extracted comments:
{'above': {}, 'header': [], 'inline': {}, 'iterabove': {}, 'iterinline': {}, 'tail': []}
== 2024-07-03 03:55:25,346 one.py:180 INFO Skipping reformatting value for parameter 'toolchain'
== 2024-07-03 03:55:25,348 easyconfig.py:1265 DEBUG Dumped easyconfig: easyblock = 'MesonNinja'

name = 'GStreamer'
version = '1.24.4'

homepage = 'https://gstreamer.freedesktop.org/'
description = """GStreamer is a library for constructing graphs of media-handling
 components. The applications it supports range from simple
 Ogg/Vorbis playback, audio/video streaming to complex audio
 (mixing) and video (non-linear editing) processing."""

toolchain = {'name': 'GCC', 'version': '13.2.0'}

source_urls = ['https://%(namelower)s.freedesktop.org/src/%(namelower)s']
sources = [SOURCELOWER_TAR_XZ]
patches = ['%(name)s-1.18_fix_bad_suid.patch']
checksums = [
    {SOURCELOWER_TAR_XZ: '52c93bc48e03533aa676fd8c15eb6b5fc326c68db311c50bcc0a865f31a6c653'},
    {'%(name)s-1.18_fix_bad_suid.patch': '3d963ffdaf157ed92f46a071c4ef46f548c0b19186427e8404cb066705bbb61a'},
]

builddependencies = [
    ('Meson', '1.2.3', '', ('GCCcore', '13.2.0')),
    ('Ninja', '1.11.1', '', ('GCCcore', '13.2.0')),
    ('Perl', '5.38.0', '', ('GCCcore', '13.2.0')),
    ('Bison', '3.8.2', '', ('GCCcore', '13.2.0')),
    ('flex', '2.6.4', '', ('GCCcore', '13.2.0')),
    ('GObject-Introspection', '1.78.1', '', ('GCCcore', '13.2.0')),
    ('gettext', '0.22', '', ('GCCcore', '13.2.0')),
    ('pkgconf', '2.0.3', '', ('GCCcore', '13.2.0')),
]
dependencies = [
    ('Python', '3.11.5', '', ('GCCcore', '13.2.0')),
    ('zlib', '1.2.13', '', ('GCCcore', '13.2.0')),
    ('GMP', '6.3.0', '', ('GCCcore', '13.2.0')),
    ('GSL', '2.7'),
    ('GLib', '2.78.1', '', ('GCCcore', '13.2.0')),
    ('libunwind', '1.6.2', '', ('GCCcore', '13.2.0')),
    ('elfutils', '0.190', '', ('GCCcore', '13.2.0')),
]


sanity_check_paths = {
    'files': [],
    'dirs': ['include', 'share', 'libexec'],
}

moduleclass = 'vis'

== 2024-07-03 03:55:25,348 filetools.py:1912 INFO Creating directory /tmp/eb-xc_pgolg/reprod_20240703035525_3086817 (parents: True, set_gid: False, sticky: False)
== 2024-07-03 03:55:25,348 easyblock.py:4484 INFO Dumped easyconfig instance to /tmp/eb-xc_pgolg/reprod_20240703035525_3086817/GStreamer-1.24.4-GCC-13.2.0.eb
== 2024-07-03 03:55:25,350 filetools.py:1912 INFO Creating directory /tmp/eb-xc_pgolg/reprod_20240703035525_3086817/easyblocks (parents: True, set_gid: False, sticky: False)
== 2024-07-03 03:55:25,351 filetools.py:2425 INFO /home/boegelbot/easybuild/easybuild-easyblocks/easybuild/easyblocks/generic/mesonninja.py copied to /tmp/eb-xc_pgolg/reprod_20240703035525_3086817/easyblocks/mesonninja.py
== 2024-07-03 03:55:25,351 easyblock.py:4464 INFO Dumped easyblock mesonninja.py required for reproduction to /tmp/eb-xc_pgolg/reprod_20240703035525_3086817/easyblocks
== 2024-07-03 03:55:25,352 filetools.py:1912 INFO Creating directory /tmp/eb-xc_pgolg/reprod_20240703035525_3086817/hooks (parents: True, set_gid: False, sticky: False)
== 2024-07-03 03:55:25,353 filetools.py:2425 INFO /home/boegelbot/boegelbot/eb_hooks.py copied to /tmp/eb-xc_pgolg/reprod_20240703035525_3086817/hooks/eb_hooks.py
== 2024-07-03 03:55:25,353 easyblock.py:4496 INFO Dumped hooks file /home/boegelbot/boegelbot/eb_hooks.py which is (potentially) required for reproduction to /tmp/eb-xc_pgolg/reprod_20240703035525_3086817/hooks/eb_hooks.py
== 2024-07-03 03:55:25,360 easyblock.py:2238 INFO Number of iterations to perform for central part of installation procedure: 1
== 2024-07-03 03:55:25,361 build_log.py:267 INFO building and installing GStreamer/1.24.4-GCC-13.2.0...
== 2024-07-03 03:55:25,361 config.py:700 DEBUG software install path as specified by 'installpath' and 'subdir_software': /project/boegelbot/Rocky8/haswell/software
== 2024-07-03 03:55:25,361 filetools.py:2005 INFO Lock /project/boegelbot/Rocky8/haswell/software/.locks/_project_boegelbot_Rocky8_haswell_software_GStreamer_1.24.4-GCC-13.2.0.lock does not exist
== 2024-07-03 03:55:25,362 config.py:700 DEBUG software install path as specified by 'installpath' and 'subdir_software': /project/boegelbot/Rocky8/haswell/software
== 2024-07-03 03:55:25,362 filetools.py:1946 INFO Creating lock at /project/boegelbot/Rocky8/haswell/software/.locks/_project_boegelbot_Rocky8_haswell_software_GStreamer_1.24.4-GCC-13.2.0.lock...
== 2024-07-03 03:55:25,362 filetools.py:1912 INFO Creating directory /project/boegelbot/Rocky8/haswell/software/.locks/_project_boegelbot_Rocky8_haswell_software_GStreamer_1.24.4-GCC-13.2.0.lock (parents: True, set_gid: False, sticky: False)
== 2024-07-03 03:55:25,362 filetools.py:1955 INFO Lock created: /project/boegelbot/Rocky8/haswell/software/.locks/_project_boegelbot_Rocky8_haswell_software_GStreamer_1.24.4-GCC-13.2.0.lock
== 2024-07-03 03:55:25,362 easyblock.py:3944 DEBUG Not skipping fetch step (skippable: False, skip: None, skipsteps: [], module_only: False, force: False, sanity_check_only: False, skip_extensions: False, skip_test_step: False)
== 2024-07-03 03:55:25,363 build_log.py:267 INFO fetching files...
== 2024-07-03 03:55:25,363 easyblock.py:3952 INFO Starting fetch step
== 2024-07-03 03:55:25,363 easyconfig.py:1702 INFO Generating template values...
== 2024-07-03 03:55:25,363 templates.py:201 DEBUG config: GStreamer EasyConfig @ /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.24.4-GCC-13.2.0.eb
== 2024-07-03 03:55:25,363 templates.py:231 DEBUG version found in easyconfig is 1.24.4
== 2024-07-03 03:55:25,363 templates.py:333 DEBUG name: bitbucket_account, config: %(namelower)s
== 2024-07-03 03:55:25,363 templates.py:333 DEBUG name: github_account, config: %(namelower)s
== 2024-07-03 03:55:25,363 templates.py:333 DEBUG name: name, config: GStreamer
== 2024-07-03 03:55:25,363 templates.py:333 DEBUG name: parallel, config: None
== 2024-07-03 03:55:25,364 templates.py:333 DEBUG name: version, config: 1.24.4
== 2024-07-03 03:55:25,364 templates.py:333 DEBUG name: versionsuffix, config:
== 2024-07-03 03:55:25,364 templates.py:333 DEBUG name: versionprefix, config:
== 2024-07-03 03:55:25,364 easyconfig.py:1721 INFO Template values: arch='x86_64', bitbucket_account='gstreamer', builddir='/tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0', cuda_cc_cmake='70', cuda_cc_semicolon_sep='7.0', cuda_cc_space_sep='7.0', cuda_compute_capabilities='7.0', cuda_sm_comma_sep='sm_70', cuda_sm_space_sep='sm_70', github_account='gstreamer', installdir='/project/boegelbot/Rocky8/haswell/software/GStreamer/1.24.4-GCC-13.2.0', module_name='GStreamer/1.24.4-GCC-13.2.0', name='GStreamer', nameletter='G', nameletterlower='g', namelower='gstreamer', perlmajver='5', perlminver='38', perlshortver='5.38', perlver='5.38.0', pymajver='3', pyminver='11', pyshortver='3.11', pyver='3.11.5', start_dir='None', sysroot='', toolchain_name='GCC', toolchain_version='13.2.0', version='1.24.4', version_major='1', version_major_minor='1.24', version_minor='24', versionprefix='', versionsuffix=''
== 2024-07-03 03:55:25,364 easyblock.py:3960 INFO Running method fetch_step part of step fetch
== 2024-07-03 03:55:25,364 easyblock.py:2360 WARNING Easyconfig does not specify an EasyBuild-version (key 'easybuild_version')! Assuming the latest version
== 2024-07-03 03:55:25,365 easyblock.py:812 INFO Considering directory in which easyconfig file is located when searching for gstreamer-1.24.4.tar.xz: /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer
== 2024-07-03 03:55:25,365 tools.py:274 INFO Found location to 'eb' script via $EB_SCRIPT_PATH: /home/boegelbot/easybuild/easybuild-framework/eb
== 2024-07-03 03:55:25,365 tools.py:290 INFO Not considering /home/boegelbot/easybuild (no easybuild/easyconfigs subdir found)
== 2024-07-03 03:55:25,365 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/easybuild/easybuild-easyconfigs/easybuild/easyconfigs/easybuild/easyconfigs
== 2024-07-03 03:55:25,365 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /tmp/eb-xc_pgolg/files_pr20805/easybuild/easyconfigs
== 2024-07-03 03:55:25,366 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /tmp/eb-xc_pgolg/fake_vsc_fhf3garn/easybuild/easyconfigs
== 2024-07-03 03:55:25,366 tools.py:303 DEBUG Checking for easybuild/easyconfigs at easybuild/easyconfigs
== 2024-07-03 03:55:25,366 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/.local/lib/python3.6/site-packages/git/ext/gitdb/easybuild/easyconfigs
== 2024-07-03 03:55:25,366 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/easybuild/easybuild-framework/easybuild/easyconfigs
== 2024-07-03 03:55:25,367 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/easybuild/easybuild-easyblocks/easybuild/easyconfigs
== 2024-07-03 03:55:25,367 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/easybuild/easybuild-easyconfigs/easybuild/easyconfigs
== 2024-07-03 03:55:25,367 tools.py:307 DEBUG Added /home/boegelbot/easybuild/easybuild-easyconfigs/easybuild/easyconfigs to list of paths for easybuild/easyconfigs
== 2024-07-03 03:55:25,367 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /usr/lib64/python36.zip/easybuild/easyconfigs
== 2024-07-03 03:55:25,367 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /usr/lib64/python3.6/easybuild/easyconfigs
== 2024-07-03 03:55:25,367 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /usr/lib64/python3.6/lib-dynload/easybuild/easyconfigs
== 2024-07-03 03:55:25,367 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/.local/lib/python3.6/site-packages/easybuild/easyconfigs
== 2024-07-03 03:55:25,367 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /usr/lib64/python3.6/site-packages/easybuild/easyconfigs
== 2024-07-03 03:55:25,367 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /usr/lib/python3.6/site-packages/easybuild/easyconfigs
== 2024-07-03 03:55:25,368 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/.local/lib/python3.6/site-packages/gitdb/ext/smmap/easybuild/easyconfigs
== 2024-07-03 03:55:25,372 filetools.py:1931 DEBUG Not creating existing path /project/boegelbot/sources/g/GStreamer
== 2024-07-03 03:55:25,372 easyblock.py:940 DEBUG Trying to download file gstreamer-1.24.4.tar.xz from https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.24.4.tar.xz to /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz ...
== 2024-07-03 03:55:25,372 filetools.py:752 DEBUG Trying to download gstreamer-1.24.4.tar.xz from https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.24.4.tar.xz to /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz
== 2024-07-03 03:55:25,372 filetools.py:755 DEBUG Using timeout of 1000.0 seconds for initiating download
== 2024-07-03 03:55:25,372 filetools.py:1931 DEBUG Not creating existing path /project/boegelbot/sources/g/GStreamer
== 2024-07-03 03:55:26,400 filetools.py:815 DEBUG HTTP response code for given url https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.24.4.tar.xz: 200
== 2024-07-03 03:55:26,401 filetools.py:816 INFO File size for https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.24.4.tar.xz: 1855020
== 2024-07-03 03:55:26,401 filetools.py:270 INFO Not showing progress bar for downloading small file (size 1855020)
== 2024-07-03 03:55:26,401 filetools.py:1931 DEBUG Not creating existing path /project/boegelbot/sources/g/GStreamer
== 2024-07-03 03:55:27,460 filetools.py:823 INFO Downloaded file gstreamer-1.24.4.tar.xz from url https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.24.4.tar.xz to /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz
== 2024-07-03 03:55:27,460 filetools.py:855 INFO Successful download of file gstreamer-1.24.4.tar.xz from url https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.24.4.tar.xz to path /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz
== 2024-07-03 03:55:27,460 easyblock.py:953 INFO Successfully downloaded source file gstreamer-1.24.4.tar.xz from https://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.24.4.tar.xz
== 2024-07-03 03:55:27,460 easyblock.py:452 DEBUG File /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz found for source gstreamer-1.24.4.tar.xz
== 2024-07-03 03:55:27,461 easyblock.py:496 INFO Added sources: [{'name': 'gstreamer-1.24.4.tar.xz', 'path': '/project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz', 'cmd': None, 'checksum': {'gstreamer-1.24.4.tar.xz': '52c93bc48e03533aa676fd8c15eb6b5fc326c68db311c50bcc0a865f31a6c653'}, 'finalpath': '/tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0'}]
== 2024-07-03 03:55:27,461 easyblock.py:812 INFO Considering directory in which easyconfig file is located when searching for GStreamer-1.18_fix_bad_suid.patch: /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer
== 2024-07-03 03:55:27,461 tools.py:274 INFO Found location to 'eb' script via $EB_SCRIPT_PATH: /home/boegelbot/easybuild/easybuild-framework/eb
== 2024-07-03 03:55:27,462 tools.py:290 INFO Not considering /home/boegelbot/easybuild (no easybuild/easyconfigs subdir found)
== 2024-07-03 03:55:27,462 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/easybuild/easybuild-easyconfigs/easybuild/easyconfigs/easybuild/easyconfigs
== 2024-07-03 03:55:27,463 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /tmp/eb-xc_pgolg/files_pr20805/easybuild/easyconfigs
== 2024-07-03 03:55:27,463 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /tmp/eb-xc_pgolg/fake_vsc_fhf3garn/easybuild/easyconfigs
== 2024-07-03 03:55:27,463 tools.py:303 DEBUG Checking for easybuild/easyconfigs at easybuild/easyconfigs
== 2024-07-03 03:55:27,464 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/.local/lib/python3.6/site-packages/git/ext/gitdb/easybuild/easyconfigs
== 2024-07-03 03:55:27,464 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/easybuild/easybuild-framework/easybuild/easyconfigs
== 2024-07-03 03:55:27,464 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/easybuild/easybuild-easyblocks/easybuild/easyconfigs
== 2024-07-03 03:55:27,465 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/easybuild/easybuild-easyconfigs/easybuild/easyconfigs
== 2024-07-03 03:55:27,465 tools.py:307 DEBUG Added /home/boegelbot/easybuild/easybuild-easyconfigs/easybuild/easyconfigs to list of paths for easybuild/easyconfigs
== 2024-07-03 03:55:27,465 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /usr/lib64/python36.zip/easybuild/easyconfigs
== 2024-07-03 03:55:27,465 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /usr/lib64/python3.6/easybuild/easyconfigs
== 2024-07-03 03:55:27,465 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /usr/lib64/python3.6/lib-dynload/easybuild/easyconfigs
== 2024-07-03 03:55:27,465 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/.local/lib/python3.6/site-packages/easybuild/easyconfigs
== 2024-07-03 03:55:27,465 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /usr/lib64/python3.6/site-packages/easybuild/easyconfigs
== 2024-07-03 03:55:27,466 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /usr/lib/python3.6/site-packages/easybuild/easyconfigs
== 2024-07-03 03:55:27,466 tools.py:303 DEBUG Checking for easybuild/easyconfigs at /home/boegelbot/.local/lib/python3.6/site-packages/gitdb/ext/smmap/easybuild/easyconfigs
== 2024-07-03 03:55:27,466 easyblock.py:853 INFO Found file GStreamer-1.18_fix_bad_suid.patch at /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.18_fix_bad_suid.patch
== 2024-07-03 03:55:27,466 easyblock.py:520 DEBUG File /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.18_fix_bad_suid.patch found for patch GStreamer-1.18_fix_bad_suid.patch
== 2024-07-03 03:55:27,466 easyblock.py:535 INFO Added patches: [{'name': 'GStreamer-1.18_fix_bad_suid.patch', 'postinstall': False, 'path': '/tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.18_fix_bad_suid.patch', 'checksum': {'GStreamer-1.18_fix_bad_suid.patch': '3d963ffdaf157ed92f46a071c4ef46f548c0b19186427e8404cb066705bbb61a'}}]
== 2024-07-03 03:55:27,466 filetools.py:1233 DEBUG Using blocksize 16777216 for calculating the checksum
== 2024-07-03 03:55:27,474 easyblock.py:2413 INFO md5 checksum for /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz: 02ece4edef992c64db973b84ae2df521
== 2024-07-03 03:55:27,474 filetools.py:1233 DEBUG Using blocksize 16777216 for calculating the checksum
== 2024-07-03 03:55:27,480 easyblock.py:2413 INFO sha256 checksum for /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz: 52c93bc48e03533aa676fd8c15eb6b5fc326c68db311c50bcc0a865f31a6c653
== 2024-07-03 03:55:27,480 filetools.py:1233 DEBUG Using blocksize 16777216 for calculating the checksum
== 2024-07-03 03:55:27,480 easyblock.py:2413 INFO md5 checksum for /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.18_fix_bad_suid.patch: 5c7ca4065b24b37c6fa0e426fc96101b
== 2024-07-03 03:55:27,480 filetools.py:1233 DEBUG Using blocksize 16777216 for calculating the checksum
== 2024-07-03 03:55:27,480 easyblock.py:2413 INFO sha256 checksum for /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.18_fix_bad_suid.patch: 3d963ffdaf157ed92f46a071c4ef46f548c0b19186427e8404cb066705bbb61a
== 2024-07-03 03:55:27,481 easyconfig.py:2642 DEBUG Determining full module name for GStreamer EasyConfig @ /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.24.4-GCC-13.2.0.eb (force_visible: False)
== 2024-07-03 03:55:27,481 easyconfig.py:2619 DEBUG No alternative software name specified to determine module name with
== 2024-07-03 03:55:27,481 utilities.py:115 DEBUG Module name GStreamer/1.24.4-GCC-13.2.0 validated
== 2024-07-03 03:55:27,481 easyconfig.py:2650 DEBUG Obtained valid full module name GStreamer/1.24.4-GCC-13.2.0
== 2024-07-03 03:55:27,481 config.py:700 DEBUG modules install path as specified by 'installpath' and 'subdir_modules': /project/boegelbot/Rocky8/haswell/modules
== 2024-07-03 03:55:27,481 easyblock.py:2448 INFO Checking dirs that need to be created: ['/project/boegelbot/Rocky8/haswell/software/GStreamer/1.24.4-GCC-13.2.0', '/project/boegelbot/Rocky8/haswell/modules/all/GStreamer', '/project/boegelbot/Rocky8/haswell/modules/vis/GStreamer']
== 2024-07-03 03:55:27,481 filetools.py:1912 INFO Creating directory /project/boegelbot/Rocky8/haswell/software/GStreamer/1.24.4-GCC-13.2.0 (parents: True, set_gid: False, sticky: False)
== 2024-07-03 03:55:27,483 filetools.py:1931 DEBUG Not creating existing path /project/boegelbot/Rocky8/haswell/modules/all/GStreamer
== 2024-07-03 03:55:27,483 filetools.py:1931 DEBUG Not creating existing path /project/boegelbot/Rocky8/haswell/modules/vis/GStreamer
== 2024-07-03 03:55:27,483 build_log.py:267 INFO ... (took 2 secs)
== 2024-07-03 03:55:27,484 easyblock.py:3944 DEBUG Not skipping ready step (skippable: False, skip: None, skipsteps: [], module_only: False, force: False, sanity_check_only: False, skip_extensions: False, skip_test_step: False)
== 2024-07-03 03:55:27,484 build_log.py:267 INFO creating build dir, resetting environment...
== 2024-07-03 03:55:27,484 easyblock.py:3952 INFO Starting ready step
== 2024-07-03 03:55:27,484 easyconfig.py:1702 INFO Generating template values...
== 2024-07-03 03:55:27,484 templates.py:201 DEBUG config: GStreamer EasyConfig @ /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.24.4-GCC-13.2.0.eb
== 2024-07-03 03:55:27,484 templates.py:231 DEBUG version found in easyconfig is 1.24.4
== 2024-07-03 03:55:27,484 templates.py:333 DEBUG name: bitbucket_account, config: %(namelower)s
== 2024-07-03 03:55:27,485 templates.py:333 DEBUG name: github_account, config: %(namelower)s
== 2024-07-03 03:55:27,485 templates.py:333 DEBUG name: name, config: GStreamer
== 2024-07-03 03:55:27,485 templates.py:333 DEBUG name: parallel, config: None
== 2024-07-03 03:55:27,485 templates.py:333 DEBUG name: version, config: 1.24.4
== 2024-07-03 03:55:27,485 templates.py:333 DEBUG name: versionsuffix, config:
== 2024-07-03 03:55:27,485 templates.py:333 DEBUG name: versionprefix, config:
== 2024-07-03 03:55:27,485 easyconfig.py:1721 INFO Template values: arch='x86_64', bitbucket_account='gstreamer', builddir='/tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0', cuda_cc_cmake='70', cuda_cc_semicolon_sep='7.0', cuda_cc_space_sep='7.0', cuda_compute_capabilities='7.0', cuda_sm_comma_sep='sm_70', cuda_sm_space_sep='sm_70', github_account='gstreamer', installdir='/project/boegelbot/Rocky8/haswell/software/GStreamer/1.24.4-GCC-13.2.0', module_name='GStreamer/1.24.4-GCC-13.2.0', name='GStreamer', nameletter='G', nameletterlower='g', namelower='gstreamer', perlmajver='5', perlminver='38', perlshortver='5.38', perlver='5.38.0', pymajver='3', pyminver='11', pyshortver='3.11', pyver='3.11.5', start_dir='None', sysroot='', toolchain_name='GCC', toolchain_version='13.2.0', version='1.24.4', version_major='1', version_major_minor='1.24', version_minor='24', versionprefix='', versionsuffix=''
== 2024-07-03 03:55:27,485 easyblock.py:3960 INFO Running method check_readiness_step part of step ready
== 2024-07-03 03:55:27,485 easyblock.py:2248 DEBUG Desired parallelism specified via 'parallel' build option: None
== 2024-07-03 03:55:27,491 systemtools.py:247 DEBUG sched_getaffinity for pid 3086817 successful
== 2024-07-03 03:55:27,492 run.py:221 DEBUG run_cmd: running cmd ulimit -u (in /home/boegelbot/boegelbot)
== 2024-07-03 03:55:27,492 run.py:247 INFO running cmd: ulimit -u
== 2024-07-03 03:55:27,497 run.py:689 DEBUG cmd "ulimit -u" exited with exit code 0 and output:
63694

== 2024-07-03 03:55:27,497 run.py:725 DEBUG Using default regular expression: (?<![(,-]|\w)(?:error|segmentation fault|failed)(?![(,-]|\.?\w)
== 2024-07-03 03:55:27,497 easyblock.py:2257 INFO Setting parallelism: 4
== 2024-07-03 03:55:27,497 modules.py:814 DEBUG Current MODULEPATH: /project/boegelbot/Rocky8/haswell/modules/all:/etc/modulefiles:/usr/share/modulefiles:/usr/share/modulefiles/Linux:/usr/share/modulefiles/Core:/usr/share/lmod/lmod/modulefiles/Core
== 2024-07-03 03:55:27,498 modules.py:824 DEBUG Changing LD_LIBRARY_PATH from '/opt/software/slurm/lib64' to '/opt/software/slurm/lib64:/opt/software/slurm/lib64' in environment for module command
== 2024-07-03 03:55:27,498 modules.py:828 DEBUG Running module command '/usr/share/lmod/lmod/libexec/lmod python --terse list' from /home/boegelbot/boegelbot
== 2024-07-03 03:55:27,540 modules.py:835 DEBUG Output of module command '/usr/share/lmod/lmod/libexec/lmod python --terse list': stdout: import os
os.environ["MODULEPATH"] = "/project/boegelbot/Rocky8/haswell/modules/all:/etc/modulefiles:/usr/share/modulefiles:/usr/share/modulefiles/Linux:/usr/share/modulefiles/Core:/usr/share/lmod/lmod/modulefiles/Core";
os.environ["_ModuleTable001_"] = "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";
os.environ["_ModuleTable002_"] = "czovdXNyL3NoYXJlL21vZHVsZWZpbGVzL0xpbnV4Oi91c3Ivc2hhcmUvbW9kdWxlZmlsZXMvQ29yZTovdXNyL3NoYXJlL2xtb2QvbG1vZC9tb2R1bGVmaWxlcy9Db3JlIiwKfQo=";
os.environ["_ModuleTable_Sz_"] = "2";
_mlstatus = True
; stderr: No modules loaded

== 2024-07-03 03:55:27,540 modules.py:1471 DEBUG Output found in stdout, seems like '/usr/share/lmod/lmod/libexec/lmod python --terse list' ran fine
== 2024-07-03 03:55:27,541 easyblock.py:3960 INFO Running method make_builddir part of step ready
== 2024-07-03 03:55:27,542 easyblock.py:1068 DEBUG Creating the build directory /tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0 (cleanup: True)
== 2024-07-03 03:55:27,542 filetools.py:1912 INFO Creating directory /tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0 (parents: True, set_gid: False, sticky: False)
== 2024-07-03 03:55:27,542 easyblock.py:3960 INFO Running method reset_env part of step ready
== 2024-07-03 03:55:27,543 easyblock.py:3960 INFO Running method handle_iterate_opts part of step ready
== 2024-07-03 03:55:27,543 easyconfig.py:1702 INFO Generating template values...
== 2024-07-03 03:55:27,543 templates.py:201 DEBUG config: GStreamer EasyConfig @ /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.24.4-GCC-13.2.0.eb
== 2024-07-03 03:55:27,543 templates.py:231 DEBUG version found in easyconfig is 1.24.4
== 2024-07-03 03:55:27,544 templates.py:333 DEBUG name: bitbucket_account, config: %(namelower)s
== 2024-07-03 03:55:27,544 templates.py:333 DEBUG name: github_account, config: %(namelower)s
== 2024-07-03 03:55:27,544 templates.py:333 DEBUG name: name, config: GStreamer
== 2024-07-03 03:55:27,544 templates.py:333 DEBUG name: parallel, config: 4
== 2024-07-03 03:55:27,544 templates.py:333 DEBUG name: version, config: 1.24.4
== 2024-07-03 03:55:27,544 templates.py:333 DEBUG name: versionsuffix, config:
== 2024-07-03 03:55:27,544 templates.py:333 DEBUG name: versionprefix, config:
== 2024-07-03 03:55:27,544 easyconfig.py:1721 INFO Template values: arch='x86_64', bitbucket_account='gstreamer', builddir='/tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0', cuda_cc_cmake='70', cuda_cc_semicolon_sep='7.0', cuda_cc_space_sep='7.0', cuda_compute_capabilities='7.0', cuda_sm_comma_sep='sm_70', cuda_sm_space_sep='sm_70', github_account='gstreamer', installdir='/project/boegelbot/Rocky8/haswell/software/GStreamer/1.24.4-GCC-13.2.0', module_name='GStreamer/1.24.4-GCC-13.2.0', name='GStreamer', nameletter='G', nameletterlower='g', namelower='gstreamer', parallel='4', perlmajver='5', perlminver='38', perlshortver='5.38', perlver='5.38.0', pymajver='3', pyminver='11', pyshortver='3.11', pyver='3.11.5', start_dir='None', sysroot='', toolchain_name='GCC', toolchain_version='13.2.0', version='1.24.4', version_major='1', version_major_minor='1.24', version_minor='24', versionprefix='', versionsuffix=''
== 2024-07-03 03:55:27,545 build_log.py:267 INFO ... (took < 1 sec)
== 2024-07-03 03:55:27,545 easyblock.py:3944 DEBUG Not skipping source step (skippable: True, skip: None, skipsteps: [], module_only: False, force: False, sanity_check_only: False, skip_extensions: False, skip_test_step: False)
== 2024-07-03 03:55:27,545 build_log.py:267 INFO unpacking...
== 2024-07-03 03:55:27,545 easyblock.py:3952 INFO Starting source step
== 2024-07-03 03:55:27,545 easyconfig.py:1702 INFO Generating template values...
== 2024-07-03 03:55:27,545 templates.py:201 DEBUG config: GStreamer EasyConfig @ /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.24.4-GCC-13.2.0.eb
== 2024-07-03 03:55:27,546 templates.py:231 DEBUG version found in easyconfig is 1.24.4
== 2024-07-03 03:55:27,546 templates.py:333 DEBUG name: bitbucket_account, config: %(namelower)s
== 2024-07-03 03:55:27,546 templates.py:333 DEBUG name: github_account, config: %(namelower)s
== 2024-07-03 03:55:27,546 templates.py:333 DEBUG name: name, config: GStreamer
== 2024-07-03 03:55:27,546 templates.py:333 DEBUG name: parallel, config: 4
== 2024-07-03 03:55:27,546 templates.py:333 DEBUG name: version, config: 1.24.4
== 2024-07-03 03:55:27,546 templates.py:333 DEBUG name: versionsuffix, config:
== 2024-07-03 03:55:27,546 templates.py:333 DEBUG name: versionprefix, config:
== 2024-07-03 03:55:27,547 easyconfig.py:1721 INFO Template values: arch='x86_64', bitbucket_account='gstreamer', builddir='/tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0', cuda_cc_cmake='70', cuda_cc_semicolon_sep='7.0', cuda_cc_space_sep='7.0', cuda_compute_capabilities='7.0', cuda_sm_comma_sep='sm_70', cuda_sm_space_sep='sm_70', github_account='gstreamer', installdir='/project/boegelbot/Rocky8/haswell/software/GStreamer/1.24.4-GCC-13.2.0', module_name='GStreamer/1.24.4-GCC-13.2.0', name='GStreamer', nameletter='G', nameletterlower='g', namelower='gstreamer', parallel='4', perlmajver='5', perlminver='38', perlshortver='5.38', perlver='5.38.0', pymajver='3', pyminver='11', pyshortver='3.11', pyver='3.11.5', start_dir='None', sysroot='', toolchain_name='GCC', toolchain_version='13.2.0', version='1.24.4', version_major='1', version_major_minor='1.24', version_minor='24', versionprefix='', versionsuffix=''
== 2024-07-03 03:55:27,547 easyblock.py:3960 INFO Running method checksum_step part of step source
== 2024-07-03 03:55:27,547 filetools.py:1233 DEBUG Using blocksize 16777216 for calculating the checksum
== 2024-07-03 03:55:27,553 filetools.py:1307 DEBUG Computed sha256 checksum for /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz: 52c93bc48e03533aa676fd8c15eb6b5fc326c68db311c50bcc0a865f31a6c653 (correct checksum: 52c93bc48e03533aa676fd8c15eb6b5fc326c68db311c50bcc0a865f31a6c653)
== 2024-07-03 03:55:27,553 easyblock.py:2466 INFO Checksum verification for /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz using {'gstreamer-1.24.4.tar.xz': '52c93bc48e03533aa676fd8c15eb6b5fc326c68db311c50bcc0a865f31a6c653'} passed.
== 2024-07-03 03:55:27,553 filetools.py:1233 DEBUG Using blocksize 16777216 for calculating the checksum
== 2024-07-03 03:55:27,553 filetools.py:1307 DEBUG Computed sha256 checksum for /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.18_fix_bad_suid.patch: 3d963ffdaf157ed92f46a071c4ef46f548c0b19186427e8404cb066705bbb61a (correct checksum: 3d963ffdaf157ed92f46a071c4ef46f548c0b19186427e8404cb066705bbb61a)
== 2024-07-03 03:55:27,553 easyblock.py:2466 INFO Checksum verification for /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.18_fix_bad_suid.patch using {'GStreamer-1.18_fix_bad_suid.patch': '3d963ffdaf157ed92f46a071c4ef46f548c0b19186427e8404cb066705bbb61a'} passed.
== 2024-07-03 03:55:27,554 easyblock.py:3960 INFO Running method extract_step part of step source
== 2024-07-03 03:55:27,554 easyblock.py:2578 INFO Unpacking source gstreamer-1.24.4.tar.xz
== 2024-07-03 03:55:27,554 filetools.py:1931 DEBUG Not creating existing path /tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0
== 2024-07-03 03:55:27,554 filetools.py:459 DEBUG Unpacking /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz in directory /tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0
== 2024-07-03 03:55:27,554 filetools.py:468 DEBUG Using command derived from file extension to unpack /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz: unset TAPE; unxz /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz --stdout | tar x
== 2024-07-03 03:55:27,554 run.py:221 DEBUG run_cmd: running cmd unset TAPE; unxz /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz --stdout | tar x (in /tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0)
== 2024-07-03 03:55:27,554 run.py:247 INFO running cmd: unset TAPE; unxz /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz --stdout | tar x
== 2024-07-03 03:55:27,743 run.py:689 DEBUG cmd "unset TAPE; unxz /project/boegelbot/sources/g/GStreamer/gstreamer-1.24.4.tar.xz --stdout | tar x" exited with exit code 0 and output:

== 2024-07-03 03:55:27,743 run.py:725 DEBUG Using default regular expression: (?<![(,-]|\w)(?:error|segmentation fault|failed)(?![(,-]|\.?\w)
== 2024-07-03 03:55:27,743 filetools.py:1361 DEBUG Last dir list ['AUTHORS', 'COPYING', 'ChangeLog', 'MAINTAINERS', 'NEWS', 'README.md', 'README.static-linking', 'RELEASE', 'data', 'docs', 'gst', 'gst-element-check-1.0.m4', 'gstreamer.doap', 'libs', 'meson.build', 'meson_options.txt', 'plugins', 'po', 'scripts', 'tests', 'tools']
== 2024-07-03 03:55:27,744 filetools.py:1362 DEBUG Possible new dir /tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0/gstreamer-1.24.4 found
== 2024-07-03 03:55:27,744 build_log.py:267 INFO ... (took < 1 sec)
== 2024-07-03 03:55:27,744 easyblock.py:3944 DEBUG Not skipping patch step (skippable: True, skip: None, skipsteps: [], module_only: False, force: False, sanity_check_only: False, skip_extensions: False, skip_test_step: False)
== 2024-07-03 03:55:27,744 build_log.py:267 INFO patching...
== 2024-07-03 03:55:27,744 easyblock.py:3952 INFO Starting patch step
== 2024-07-03 03:55:27,744 easyconfig.py:1702 INFO Generating template values...
== 2024-07-03 03:55:27,745 templates.py:201 DEBUG config: GStreamer EasyConfig @ /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.24.4-GCC-13.2.0.eb
== 2024-07-03 03:55:27,745 templates.py:231 DEBUG version found in easyconfig is 1.24.4
== 2024-07-03 03:55:27,745 templates.py:333 DEBUG name: bitbucket_account, config: %(namelower)s
== 2024-07-03 03:55:27,745 templates.py:333 DEBUG name: github_account, config: %(namelower)s
== 2024-07-03 03:55:27,745 templates.py:333 DEBUG name: name, config: GStreamer
== 2024-07-03 03:55:27,745 templates.py:333 DEBUG name: parallel, config: 4
== 2024-07-03 03:55:27,745 templates.py:333 DEBUG name: version, config: 1.24.4
== 2024-07-03 03:55:27,745 templates.py:333 DEBUG name: versionsuffix, config:
== 2024-07-03 03:55:27,746 templates.py:333 DEBUG name: versionprefix, config:
== 2024-07-03 03:55:27,746 easyconfig.py:1721 INFO Template values: arch='x86_64', bitbucket_account='gstreamer', builddir='/tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0', cuda_cc_cmake='70', cuda_cc_semicolon_sep='7.0', cuda_cc_space_sep='7.0', cuda_compute_capabilities='7.0', cuda_sm_comma_sep='sm_70', cuda_sm_space_sep='sm_70', github_account='gstreamer', installdir='/project/boegelbot/Rocky8/haswell/software/GStreamer/1.24.4-GCC-13.2.0', module_name='GStreamer/1.24.4-GCC-13.2.0', name='GStreamer', nameletter='G', nameletterlower='g', namelower='gstreamer', parallel='4', perlmajver='5', perlminver='38', perlshortver='5.38', perlver='5.38.0', pymajver='3', pyminver='11', pyshortver='3.11', pyver='3.11.5', start_dir='None', sysroot='', toolchain_name='GCC', toolchain_version='13.2.0', version='1.24.4', version_major='1', version_major_minor='1.24', version_minor='24', versionprefix='', versionsuffix=''
== 2024-07-03 03:55:27,746 easyblock.py:3960 INFO Running method patch_step part of step patch
== 2024-07-03 03:55:27,746 easyblock.py:2596 INFO Applying patch GStreamer-1.18_fix_bad_suid.patch
== 2024-07-03 03:55:27,746 easyblock.py:2609 DEBUG Source index: 0; patch level: None; source path suffix: ; copy patch: False
== 2024-07-03 03:55:27,746 easyblock.py:2614 DEBUG Determine begin path for patch GStreamer-1.18_fix_bad_suid.patch: /tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0/gstreamer-1.24.4
== 2024-07-03 03:55:27,746 easyblock.py:2623 DEBUG Applying patch {'name': 'GStreamer-1.18_fix_bad_suid.patch', 'postinstall': False, 'path': '/tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.18_fix_bad_suid.patch', 'checksum': {'GStreamer-1.18_fix_bad_suid.patch': '3d963ffdaf157ed92f46a071c4ef46f548c0b19186427e8404cb066705bbb61a'}, 'md5': '5c7ca4065b24b37c6fa0e426fc96101b', 'sha256': '3d963ffdaf157ed92f46a071c4ef46f548c0b19186427e8404cb066705bbb61a'} in path /tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0/gstreamer-1.24.4
== 2024-07-03 03:55:27,748 filetools.py:1464 DEBUG No match found for gstreamer-1.20.2/libs/gst/helpers/ptp_helper_post_install.sh, trying next patched file...
== 2024-07-03 03:55:27,914 build_log.py:171 ERROR EasyBuild crashed with an error (at easybuild/easybuild-framework/easybuild/base/exceptions.py:126 in __init__): Can't determine patch level for patch /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.18_fix_bad_suid.patch from directory /tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0/gstreamer-1.24.4 (at easybuild/easybuild-framework/easybuild/tools/filetools.py:1617 in apply_patch)
== 2024-07-03 03:55:27,914 build_log.py:267 INFO ... (took < 1 sec)
== 2024-07-03 03:55:27,915 config.py:700 DEBUG software install path as specified by 'installpath' and 'subdir_software': /project/boegelbot/Rocky8/haswell/software
== 2024-07-03 03:55:27,915 filetools.py:2013 INFO Removing lock /project/boegelbot/Rocky8/haswell/software/.locks/_project_boegelbot_Rocky8_haswell_software_GStreamer_1.24.4-GCC-13.2.0.lock...
== 2024-07-03 03:55:27,916 filetools.py:383 INFO Path /project/boegelbot/Rocky8/haswell/software/.locks/_project_boegelbot_Rocky8_haswell_software_GStreamer_1.24.4-GCC-13.2.0.lock successfully removed.
== 2024-07-03 03:55:27,916 filetools.py:2017 INFO Lock removed: /project/boegelbot/Rocky8/haswell/software/.locks/_project_boegelbot_Rocky8_haswell_software_GStreamer_1.24.4-GCC-13.2.0.lock
== 2024-07-03 03:55:27,916 easyblock.py:4287 WARNING build failed (first 300 chars): Can't determine patch level for patch /tmp/eb-xc_pgolg/files_pr20805/g/GStreamer/GStreamer-1.18_fix_bad_suid.patch from directory /tmp/boegelbot/GStreamer/1.24.4/GCC-13.2.0/gstreamer-1.24.4
== 2024-07-03 03:55:27,916 easyblock.py:328 INFO Closing log for application name GStreamer version 1.24.4