| # Please Note, I am sharing this, hoping this will be used for good public use, such as data analysis, penetration testing etc | |
| # These links are already available all over the internet | |
| # Also Note, Trying to login into someone else's account without their permission is unethical and illegal | |
| # Collection 1 | |
| magnet:?xt=urn:btih:B39C603C7E18DB8262067C5926E7D5EA5D20E12E&dn=Collection%201&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=http%3a%2f%2fopentracker.xyz%3a80%2fannounce | |
| # Collection 2-5 & Antipublic | |
| magnet:?xt=urn:btih:D136B1ADDE531F38311FBF43FB96FC26DF1A34CD&dn=Collection%20%232-%235%20%26%20Antipublic&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=http%3a%2f%2fopentracker.xyz%3a80%2fannounce |
How I installed Onlyoffice Docs 5.6 (DocumentServer) into a Debian 10 Buster Proxmox LXC Container.
| deb http://ports.ubuntu.com/ubuntu-ports focal main restricted universe multiverse | |
| deb-src http://ports.ubuntu.com/ubuntu-ports focal main restricted universe multiverse | |
| deb http://ports.ubuntu.com/ubuntu-ports focal-updates main restricted universe multiverse | |
| deb-src http://ports.ubuntu.com/ubuntu-ports focal-updates main restricted universe multiverse | |
| deb http://ports.ubuntu.com/ubuntu-ports focal-backports main restricted universe multiverse | |
| deb-src http://ports.ubuntu.com/ubuntu-ports focal-backports main restricted universe multiverse | |
| deb http://ports.ubuntu.com/ubuntu-ports focal-security main restricted universe multiverse |
Just bought one unit of GK7102-based camera at US$8 (Yes, just US$8!). The seller claimed it had a 1080p sensor and three antennas but the sensor was found to be 720p and only one antenna is wired. No manufacturer information available but only a model "Y6A-WA" printed on the box.
After unboxing, the PCB was found detached from the base. Opening the base and show that the PCB has two mounting holes but only one screw was found. Moreover, the size of the mounting holes are too big for that screw!
CPU: ARMv6 CPU
| #!/bin/bash | |
| # Copyright 2018, Anthony Wharton | |
| # Single script that can be called that generates certificates using the | |
| # certbotFreeDNSAuthHook.sh and certbotFreeDNSCleanupHook.sh scripts. | |
| # This should be used as guidence of my usage, and changed to your needs. Note | |
| # the generic `/path/to/...` and `DOMAIN.COM`, which should be replaced with | |
| # your script location and domain respectively. In addition, for this to be | |
| # used on a live system, one must remove the `--dry-run` flag. |
| #!/bin/bash | |
| NOWIPADDR="/home/pi/nowipaddr" | |
| GETIPADDR="dig +short myip.opendns.com @resolver1.opendns.com" | |
| LOG="/home/pi/ip.log" | |
| timestamp=$( date +%T ) | |
| curDate=$( date +"%m-%d-%y" ) | |
| if [ -f $NOWIPADDR ]; then | |
| if [[ `$GETIPADDR` = $(< $NOWIPADDR) ]]; then | |
| echo $curDate $timestamp " IP address check: " $(< $NOWIPADDR) >> $LOG |
With heightening concern regarding the state of internet privacy (fuelled in part by the passing of the Investigatory Powers Act in the UK), I have set up a VPN server on the virtual server I have hosted with Mythic Beasts. This uses strongSwan and certificate-based IKEv2 authentication.
Assumptions:
debian.example.com, a public IPv4 of 203.0.113.1 and a public IPv6 of 2001:db8::1meFor automated deployment of a similar setup, albeit Ubuntu-based and using ansible for deployment, I recommend you take a look at Algo VPN. I used that project as a basis for my configuration.
| /* | |
| * (un)comment correct payload first (x86 or x64)! | |
| * | |
| * $ gcc cowroot.c -o cowroot -pthread | |
| * $ ./cowroot | |
| * DirtyCow root privilege escalation | |
| * Backing up /usr/bin/passwd.. to /tmp/bak | |
| * Size of binary: 57048 | |
| * Racing, this may take a while.. | |
| * /usr/bin/passwd overwritten |
| # Create your CA crt and key: | |
| openssl req -new -x509 -nodes -newkey rsa:4096 -extensions v3_ca -sha256 -days 3650 -subj "/C=US/ST=CA/L=San Francisco/O=Acme Inc./CN=Acme Insecure Certificate Authority" -keyout ca.key -out ca.crt | |
| chmod 600 ca.key | |
| # Create a CSR: | |
| openssl req -newkey rsa:2048 -nodes -sha256 -keyout cert.key -out cert.csr -subj "/C=US/ST=CA/L=San Francisco/O=Snakeoil Inc./OU=Core/CN=lobotomat.de" | |
| # Check contents of CSR (optional): | |
| openssl req -in cert.csr -text -noout |
| #!/usr/env python | |
| ############################################################################################################### | |
| ## [Title]: linuxprivchecker.py -- a Linux Privilege Escalation Check Script | |
| ## [Author]: Mike Czumak (T_v3rn1x) -- @SecuritySift | |
| ##------------------------------------------------------------------------------------------------------------- | |
| ## [Details]: | |
| ## This script is intended to be executed locally on a Linux box to enumerate basic system info and | |
| ## search for common privilege escalation vectors such as world writable files, misconfigurations, clear-text | |
| ## passwords and applicable exploits. |