Created
July 26, 2020 23:17
-
-
Save borice/a01c10bd379d1353b2d6d45b8b951da5 to your computer and use it in GitHub Desktop.
bricked iDRAC7 boot console on PowerEdge T620
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
U-Boot 2009.08-00088-g121cddc (Nov 17 2014 - 05:50:46) Avocent (0.0.3) EVB, Build: jenkins-idrac-yocto-release-505 | |
CPU: SH-4A | |
BOARD: R0P7757LC00xxRL (C0 step) board | |
BOOT: Secure, HRK not generated | |
DRAM: 240MB | |
(240MB of 256MB total DRAM is available on U-Boot) | |
ENV: Using primary env area. | |
In: serial | |
Out: serial | |
Err: serial | |
PCIe: Bridge loaded with 0x18000 bytes | |
WDT2: Booted Lower Vector, 'uboot1' | |
sh_mmcif: 0, sh-sdhi: 1 | |
Net: sh_eth.0, sh_g_eth.0 | |
INFO: 00:002 Start-up -to- util_idrac_main() | |
INFO: 00:004 U-Boot 2009.08-00088-g121cddc (Nov 17 2014 - 05:50:46) Avocent (0.0.3) EVB | |
INFO: 00:009 U-Boot checkin date(05-10-2013) Version(1.0.183) | |
INFO: 00:006 iDRAC PPID <NULL> | |
INFO: 00:003 SPI NOR init 4096 KiB AT25DF321A bus=0 cs=0, speed=1000000, mode=3 | |
INFO: 00:007 SH-4A Product: Major Ver=0x31 Minor Ver=0x14 C4 Little endian | |
Family=0x10 Major Ver=0x30 Minor Ver=0x0b | |
PASS: 00:016 Dedicated monolithic mgmt NIC disabled | |
INFO: 00:128 BCM54610 OUI=0x3fffff Model=0x3f Revision=0x0f PhyAddr=1 | |
INFO: 00:006 SD CARD: is not found | |
INFO: 00:469 EMMC: Device: sh_mmcif Manufacturer ID: 90 OEM: 14a | |
Name: HYNIX Tran Speed: 25000000 Rd Block Len: 512 | |
MMC version 4.0 High Capacity: Yes Capacity: 0 | |
INFO: 00:018 CPLD: Major Ver=0x1 Minor Ver=0x0 Maint Ver=0x3 | |
Planar: Type=0x04 Rev=0x8 Rework=0x0 Scratch/PathRetry=0x00 | |
PASS: 00:014 Coin cell detected good, AD=0x3a8 low water=0x2c1 | |
PASS: 00:008 PCIe C0 Ver=0.15 MCTP en, CRC=0x8e9b6875 @0x8efbf954 cnt=0x18000 | |
INFO: 00:007 Init PCIe mailbox(PCIe 0xFFEE0150=0x40010000) | |
INFO: 00:006 mode=normal | |
Erasing SPI flash at 0x100000...Writing to SPI flash...done | |
Erasing SPI flash at 0x110000...Writing to SPI flash...done | |
PASS: 01:253 Booted Lower Vector, 'uboot1' wdt2cnt=0 | |
INFO: 00:005 wdt0cnt=0 | |
PASS: 00:003 Clear CH1/CH2, clear 4K shared memory@0xffcaa000 on AC power up | |
PASS: 00:008 SMR0 no sermux env, default 0xd4 | |
INFO: 00:004 GRACR=0x3c HISEL=0x00 SIRQCR5_D=0x03 SIRQCR6_D=0x01 LADMSK0=0xff2 | |
MRSTCR0=0xfedffe7f MRSTCR1=0xfff3ff0f MRSTCR2=0x7f80feff | |
BARMAP=0x1 BCR=0x85000000 NCER=0x01fc NCMCR=0x0006 NCCSR=0x0303 | |
PASS: 00:021 etherc0=F0:1F:AF:D0:B4:71 | |
getherc0=F0:1F:AF:D0:B4:72 | |
INFO: 00:010 Fan logic for monolithic planar type 4 | |
fan1 - def 0000 1fff 3d fan2 - def 0000 1fff 3d | |
fan3 - def 0000 1fff 3d fan4 - def 0000 1fff 3d | |
fan5 - def 0000 1fff 3d fan6 - def 0000 1fff 3d | |
fan7 - def 0000 1fff 3d fan8 - def 0000 1fff 3d | |
INFO: 00:076 Env and backup CRC'ed ok | |
*** no text signature found *** | |
INFO: 00:654 Sync eMMC/SPI NOR/Alternate u-boot images | |
PASS: 00:259 Current u-boot1 1.0.183 verified with 'ubootN' | |
Trailer Struct - Missing start token, exp=0xc0de1111 rec=0x0 | |
U-boot2 in sync with u-boot1 1.0.183 | |
PASS: 04:101 Verify OS Images N: CRC32 OK: Kernel=0x8c86b2b Rootfs=0xb0e73b0 | |
PASS: 00:007 Boot device=emmc Boot partition1/N | |
Boot Path Retry:P1/N=0 P5/N-1=0 | |
INFO: 00:000 07:113 | |
WDT2: Disabled | |
Initialization complete, proceed with boot | |
*** no text signature found *** | |
No. Device | |
--------------------- | |
1 EVB SD/MMC | |
4 FLASH | |
Current Device ==> 1 | |
OS_WDT0_EN:180 seconds, Re-load ILRAM: | |
Boot Path Retry:P1/N=0 P5/N-1=0 | |
Copying kernel image ... OK | |
## Booting kernel from Legacy Image at 82000000 ... | |
Image Name: sh-linux | |
Image Type: SuperH Linux Kernel Image (gzip compressed) | |
Data Size: 2545045 Bytes = 2.4 MB | |
Load Address: 80001000 | |
Entry Point: 80002000 | |
Verifying Checksum ... OK | |
Uncompressing Kernel Image ... OK | |
WDT2: Disable in do_bootm_linux() | |
sh_eth_init | |
Monolithic/DRB | |
init started: BusyBox v1.18.4 (2014-11-17 05:25:30 CST) | |
starting pid 409, tty '': '/etc/init.d/rcS' | |
waitfor: pid 409 ... | |
setting net.ipv6.conf.default.accept_dad based on kernel bootup option | |
enable normal accept DAD for ipv6 | |
Sat Jan 1 00:00:01 UTC 2000 To execute command __source /etc/sysapps_script/I_1000_mountfs.sh__ | |
Sat Jan 1 00:00:02 UTC 2000 To execute command __source /etc/sysapps_script/I_1001_trigwdt.sh__ | |
<========= Start H/W watchdog first... =========> | |
Sat Jan 1 00:00:02 UTC 2000 To execute command __source /etc/sysapps_script/I_1100_nfs.sh__ | |
Sat Jan 1 00:00:02 UTC 2000 To execute command __source /etc/sysapps_script/I_1105_ps.sh__ | |
XXXXXX /dev/mmcblk0p11 | |
/dev/mmcblk0p11: recovering journal | |
fsck.ext3: Attempt to read block from filesystem resulted in short read while trying to re-open /dev/mmcblk0p11 | |
e2fsck: io manager magic bad! | |
e2fsck 1.41.14 (22-Dec-2010) | |
fsck.ext3: Attempt to read block from filesystem resulted in short read while trying to open /dev/mmcblk0p11 | |
Could this be a zero-length partition? | |
mount: mounting /dev/mmcblk0p11 on /flash/data0 failed: Invalid argument | |
mounting private storage fail, formatting partition | |
/etc/init.d/rcS: /etc/sysapps_script/I_1105_ps.sh: line 29: mkfs.ext3: Input/output error | |
tune2fs 1.41.14 (22-Dec-2010) | |
tune2fs: Attempt to read block from filesystem resulted in short read while trying to open /dev/mmcblk0p11 | |
Couldn't find valid filesystem superblock. | |
mount: mounting /dev/mmcblk0p11 on /flash/data0 failed: Invalid argument | |
Sat Jan 1 00:00:04 UTC 2000 To execute command __source /etc/sysapps_script/I_1106_clear_ps.sh__ | |
mkdir: can't create directory '/flash/data0/oem_ps': Read-only file system | |
Sat Jan 1 00:00:04 UTC 2000 To execute command __source /etc/sysapps_script/I_1150_SYS_Drv.sh__ | |
insmod: read error from '/lib/modules/aess_eventhandlerdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_eventhandlerdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_kcsdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_kcsdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_biospostdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_biospostdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_gpiodrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_gpiodrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_sgpiodrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_sgpiodrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_dynairqdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_dynairqdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_i2c_hwctrldrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_i2c_hwctrldrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_i2cdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_i2cdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_pecisensordrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_pecisensordrv.ko': Input/output error | |
insmod: read error from '/lib/modules/cryptodev.ko': Input/output error | |
insmod: can't insert '/lib/modules/cryptodev.ko': Input/output error | |
insmod: read error from '/lib/modules/sh_tsip.ko': Input/output error | |
insmod: can't insert '/lib/modules/sh_tsip.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_fansensordrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_fansensordrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_pwmdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_pwmdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_timerdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_timerdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_adcsensordrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_adcsensordrv.ko': Input/output error | |
insmod: read error from '/lib/modules/VKCSDriver.ko': Input/output error | |
insmod: can't insert '/lib/modules/VKCSDriver.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_memdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_memdrv.ko': Input/output error | |
Sat Jan 1 00:00:05 UTC 2000 To execute command __source /etc/sysapps_script/I_1151_SYS_Drv.sh__ | |
insmod: read error from '/lib/modules/aess_spi1drv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_spi1drv.ko': Input/output error | |
insmod: read error from '/lib/modules/dell_cplddrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/dell_cplddrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_rspidrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_rspidrv.ko': Input/output error | |
insmod: read error from '/lib/modules/dell_fpdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/dell_fpdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/dell_eerspidrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/dell_eerspidrv.ko': Input/output error | |
insmod: read error from '/lib/modules/sh_pbi.ko': Input/output error | |
insmod: can't insert '/lib/modules/sh_pbi.ko': Input/output error | |
Sat Jan 1 00:00:06 UTC 2000 To execute command __source /etc/sysapps_script/I_1170_mknode.sh__ | |
Sat Jan 1 00:00:06 UTC 2000 To execute command __/etc/sysapps_script/config_lib_init.sh__ | |
mounting Platform Data 1 partition | |
mount: mounting /dev/mmcblk0p9 on /tmp/pd0/ failed: Input/output error | |
/etc/sysapps_script/config_lib_init.sh: line 28: /etc/default/ipmi/getsysid: not found | |
/etc/sysapps_script/config_lib_init.sh: line 36: shmwrite: Input/output error | |
mkdir: can't create directory '/flash/data0/config/': Read-only file system | |
/etc/sysapps_script/config_lib_init.sh: cd: line 46: can't cd to /flash/data0/config/ | |
ln: ./lmcfg.txt: Read-only file system | |
ln: ./platcfggrp.txt: Read-only file system | |
ln: ./platcfgfld.txt: Read-only file system | |
ln: ./cfgfld.txt: Read-only file system | |
ln: ./cfggrp.txt: Read-only file system | |
ln: ./gencfggrp.txt: Read-only file system | |
ln: ./gencfgfld.txt: Read-only file system | |
ln: ./nonpmaltdefaults.txt: Read-only file system | |
ln: ./altdefaults.txt: Read-only file system | |
/etc/sysapps_script/network_defaults_init.sh: line 29: /etc/default/ipmi/getsysid: not found | |
MemAccess: error while loading shared libraries: libmemaccess.so.1: cannot open shared object file: Input/output error | |
cp: can't stat '/tmp/pd0/network_config/Orca/iDRACnet.default': No such file or directory | |
cp: can't stat '/tmp/pd0/network_config/Orca/NICSelection.sh': No such file or directory | |
Sat Jan 1 00:00:06 UTC 2000 To execute command __source /etc/sysapps_script/I_1160_OSINET.sh__ | |
MemAccess: error while loading shared libraries: libmemaccess.so.1: cannot open shared object file: Input/output error | |
/etc/sysapps_script/eth1_init.sh: line 33: /tmp/pd0/ipmi/getsysid: not found | |
Sat Jan 1 00:00:06 UTC 2000 To execute command __source /etc/sysapps_script/I_1200_etc_defaults.sh__ | |
7.01 0.06 | |
cp: can't create '/flash/data0/etc/hosts': Read-only file system | |
mkdir: can't create directory '/flash/data0/sysconfig': Read-only file system | |
mkdir: can't create directory '/flash/data0/ipsec': Read-only file system | |
cp: can't create '/flash/data0/etc/hosts': Read-only file system | |
Sat Jan 1 00:00:07 UTC 2000 To execute command __source /etc/sysapps_script/I_1210_sysklog_syslogd.sh__ | |
/etc/init.d/rcS: /etc/sysapps_script/I_1210_sysklog_syslogd.sh: line 16: /etc/sysapps_script/syslog.sh: Input/output error | |
Sat Jan 1 00:00:07 UTC 2000 To execute command __source /etc/sysapps_script/I_trab_asdf.sh__ | |
insmod: read error from '/lib/modules/trab.ko': Input/output error | |
insmod: can't insert '/lib/modules/trab.ko': Input/output error | |
Sat Jan 1 00:00:07 UTC 2000 To execute command __source /etc/sysapps_script/I_usb_drv.sh__ | |
NOTICE: Not full features configuration - kbdmouse not operational | |
insmod: read error from '/lib/modules/g_r8a66597_udc.ko': Input/output error | |
insmod: can't insert '/lib/modules/g_r8a66597_udc.ko': Input/output error | |
failed load of g_r8a66597_udc | |
Sat Jan 1 00:00:07 UTC 2000 To execute command __source /etc/sysapps_script/I_video_drv.sh__ | |
insmod: read error from '/lib/modules/aess_video.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_video.ko': Input/output error | |
waitfor: pid 409, wpid 409 | |
Please press Enter to activate this console. ifconfig: SIOCGIFFLAGS: No such device | |
ifconfig: SIOCGIFFLAGS: No such device | |
12.63 0.06 | |
starting pid 551, tty '': '-/bin/sh' | |
[SH7757 ~]$ | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment