dentechy

How to automatically start ssh server on boot on Windows Subsystem for Linux

Microsoft partnered with Canonical to create Bash on Ubuntu on Windows, running through a technology called the Windows Subsystem for Linux. Below are instructions on how to set up the ssh server to run automatically at boot.

1. Edit the /etc/ssh/sshd_config file by running the command sudo vi /etc/ssh/sshd_config and do the following
   1. Change Port to 2222 (or any other port above 1000)
   2. Change PasswordAuthentication to yes. This can be changed back to no if ssh keys are setup.
2. Restart the ssh server:
   • sudo service ssh --full-restart
3. With this setup, the ssh server must be turned on every time you run Bash on Ubuntu on Windows, as by default it is off. Use this command to turn it on:

fbartho

Performance on Synology RAIDs

(especially while expanding)

Warning: The exact commands may not match for your particular linux OS / Synology(NAS) device. I had to customize the commands after exploring my particular system's setup.

If you're new to linux, or this is a new piece of hardware / a new synology device, jump down to the section called "Inspecting a setup"

Contents

TheDonDope

Escape from Tarkov Controls Cheat Sheet

BEGINNER'S GUIDE - ALL CONTROLS + TIPS (Escape from Tarkov)

Controls

• Hold Shift when zoomed in with Mouse Right Click to hold breath and steady aim
• Press B to switch between firing modes 🔥 (You will always start a raid in single fire mode)
  • The animation when switching to 🔥 🔥 🔥 fire is an ⬆️ flick

• The animation when switching to 🔥 fire is an ⬇️ flick

mtrunkat

#!/bin/bash

# See https://github.com/docker-library/mongo/pull/63

docker run --rm --volumes-from my-mongo-server mongo unlink "/data/db/mongod.lock"
docker run --rm --volumes-from my-mongo-server mongo --repair

ross-p

/**
 * Ethereum Account Scanner
 *
 * To run this, you need your own geth node, accepting RPC
 * connections on a port you can access.
 *
 * Install pre-requisites:
 *     sudo npm install -g web3
 *
 * Usage:

davidderus

.git
.gitignore
/doc
.yardoc
coverage
jsdoc
/tmp
/log
Dockerfile
Dockerfile.prod

staltz

The introduction to Reactive Programming you've been missing

(by @andrestaltz)

---

This tutorial as a series of videos

If you prefer to watch video tutorials with live-coding, then check out this series I recorded with the same contents as in this article: Egghead.io - Introduction to Reactive Programming.

---

CMCDragonkai

AngularJS Directive Attribute Binding Explanation

When using directives, you often need to pass parameters to the directive. This can be done in several ways. The first 3 can be used whether scope is true or false. This is still a WIP, so validate for yourself.

1. Raw Attribute Strings

   <div my-directive="some string" another-param="another string"></div>

gabrielhpugliese

Tutorial: Meteor in Windows using Vagrant

BEFORE YOU CONTINUE:

• Now, Meteor runs in any Windows without any line of this tutorial. Just download the Meteor binary! Yay!!
• mrt is no longer used with Meteor 1.0

These days some people were discussing at meteor-talk group about running Meteor at Windows and I’ve recommended them using Vagrant. It’s a very developer-friendly piece of software that creates a virtual machine (VM) which let you run any operating system wanted and connect to it without big efforts of configuration (just make the initial installation and you have it working).

Many packages (I've tested) for running Meteor+Vagrant fails because Meteor writes its mongodb file and also other files inside local build folder into a shared folder between the Windows host and the Linux guest, and it simply does not work. So I've put my brain to work and found a solution: do symlinks inside the VM (but do not use ln. Use mount so git can follow it). It’s covered on

i-scorpion

Here is a simple jQuery plugin to make a table header fixed on top when window is scrolled.
Using the code from twitter bootstrap documentation page, this code is customized for table header.

Create the table with following layout -
<table class="table-fixed-header">
  <thead class="header">
    <tr>
      <th>Column 1</th>
      <th>Column 2</th>
      <th>Column 3</th>