Neo Coolcam PIR sensor reverse-engineering

fastblink bootstrap success.txt

# 37 ms
# GPIO2 log now at 76923 bps
LOG: ets Jan 8 2013, rst cause: 1, boot mode:(3,7)

# 108 ms
LOG: ... jump to run user1 @ 1000

# 155 ms:
LOG: OS SDK ver: 1.4.2

# 722 ms
LOG: [notice]user_main.c:267 OS SDK version:1.4.2

# 775 ms
LOG: mode : sta (<mac>) add if0

# 896 ms
LOG: scandone

# 1842 ms
LOG: state: 0 -> 2 (b0)

# 1844 ms: get product key and version from coprocessor
TX: 55 AA 00 01 00 00 00
RX: 55 AA 00 01 00 ${"P":"Okurono2XLVRV0fB","v":"1.1.0"} 19

# 1849 ms
LOG: state: 2 -> 3 (0)

# 1856 ms
LOG: state: 3 -> 5 (10) add 0 aid 20 pm open phy_2,type:2 0 0 cnt

# 1833 ms
LOG: connected with khaus, channel 1 dhcp client start...

# 2086 ms - heartbeat - wifi up, no IP
TX: 55 AA 00 02 00 01 02 04
RX: 55 AA 00 02 00 00 01

# 2236 ms - heartbeat - wifi up, no IP
TX: 55 AA 00 02 00 01 02 04
RX: 55 AA 00 02 00 00 01

# 3627 ms
LOG: ip:10.0.2.216,mask:255.255.255.0,gw:10.0.1.1

# 3687 ms - heartbeat - wifi up, IP up, no MQTT
TX: 55 AA 00 02 00 01 03 05
RX: 55 AA 00 02 00 00 01

# 3755 ms
LOG: [notice]mqtt_client.c:629 mqtt connect success

# 3837 ms - heartbeat - wifi up, IP up, MQTT up
TX: 55 AA 00 02 00 01 04 06
RX: 55 AA 00 02 00 00 01

# 4053 ms - Holding down button; reset command?
RX: 55 AA 00 03 00 00 02

# 4137 ms - Reset command ack
TX: 55 AA 00 03 00 00 02

# 5604 ms
LOG: state: 5 -> 0 (0) rm 0 pm close 7 0 0/3747861 del if0 usl [err]mqtt_client.c:668 mq_recv_block ret:0,errno:107

# 5657 ms
# GPIO2 log now at 115200 bps
LOG: ets Jan 8 2013, rst cause: 1, boot mode:(3,7)

# 5709 ms
LOG: ... jump to run user1 @ 1000

# 5743 ms
# GPIO2 log now at 76923 bps
LOG: OS SDK ver: 1.4.3

# 6311 ms
LOG: [notice]user_main.c:267 OS SDK version:1.4.2

# 6601 ms
LOG: mode: softAP(<mac>) dhcp server start

# 6741 ms
TX: 55 AA 00 01 00 00 00
RX: 55 AA 00 01 00 ${"P":"Okurono2XLVRV0fB","v":"1.1.0"} 19

# 7102 ms
LOG: bcn 0 del if1 usl mode : sta(mac) add if0

# 7241 ms - heartbeat - waiting for config (fast blink: SmartConfig mode)
TX: 55 AA 00 02 00 01 00 02
RX: 55 AA 00 02 00 00 01

# 7391 ms - heartbeat - waiting for config (fast blink: SmartConfig mode)
TX: 55 AA 00 02 00 01 00 02
RX: 55 AA 00 02 00 00 01

# NOTE - heartbeat - waiting for config (slow blink: SoftAP mode)
TX: 55 AA 00 02 00 01 01 03
RX: 55 AA 00 02 00 00 01

# 9322 ms
LOG: scandone

# 26079 ms
LOG: del if0 usl

# 26134 ms
# GPIO2 log now at 115200 bps
LOG: ets Jan 8 2013, rst cause: 1, boot mode:(3,7)

# 26186 ms
LOG: ... jump to run user1 @ 1000

# 26220 ms
# GPIO2 log now at 76923 bps
LOG: OS SDK ver: 1.4.3

# 26789 ms
LOG: [notice]user_main.c:267 OS SDK version:1.4.2

# 27075 ms
LOG: mode : sta(mac) add if0

# 27219 ms
TX: 55 AA 00 01 00 00 00
RX: 55 AA 00 01 00 ${"P":"Okurono2XLVRV0fB","v":"1.1.0"} 19

# 27469 ms - heartbeat - wifi up, no IP
TX: 55 AA 00 02 00 01 02 04
RX: 55 AA 00 02 00 00 01

# 27619 ms - heartbeat - wifi up, no IP
TX: 55 AA 00 02 00 01 02 04
RX: 55 AA 00 02 00 00 01

# 29205 ms
LOG: scandone

# 30151 ms
LOG: state: 0 -> 2 (b0)

# 30156 ms
LOG: state: 2 -> 3 (0)

# 30165 ms
LOG: state: 3 -> 5 (10) add 0 aid 20 pm open phy_2,type:2 0 0 cnt

# 30178 ms
LOG: connected with khaus, channel 1 dhcp client start...

# 32955 ms
LOG: ip:10.0.1.216,mask:255.255.255.0,gw:10.0.1.1

# 33024 ms - heartbeat - wifi up, IP up, no MQTT
TX: 55 AA 00 02 00 01 03 05
RX: 55 AA 00 02 00 00 01

# 34556 ms
LOG: [notice]mqtt_client.c:629 mqtt connect success

# 34635 ms - heartbeat - wifi up, IP up, MQTT up
TX: 55 AA 00 02 00 01 04 06
RX: 55 AA 00 02 00 00 01 

# 38000 ms
# POWER DOWN