-
-
Save brettinternet/5883a606cef3024fe4237492b7e419af to your computer and use it in GitHub Desktop.
upsy desky logs
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [D][sensor:094]: 'Heap Free': Sending state 41688.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 32.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 41688.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 36.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 41552.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 32.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 41688.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 36.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 41688.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 34.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 41688.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 35.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40992.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 34.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40992.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 48.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40992.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 36.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40992.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 40.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40992.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 31.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40992.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 31.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40992.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 39.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40992.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 44.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40960.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 35.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40948.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 37.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40960.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 46.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40960.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 37.00000 ms with 0 decimals of accuracy | |
| [D][button:010]: 'Re-Detect Decoder' Pressed. | |
| [I][standing_desk_height:036]: Starting decoder detection | |
| [D][standing_desk_height:057]: Attempting next decoder variant: jarvis | |
| [D][standing_desk_height:099]: Decoder jarvis does not appear to work; trying next decoder | |
| [D][standing_desk_height:057]: Attempting next decoder variant: uplift | |
| [I][standing_desk_height:094]: Decoder detection complete. Correct decoder variant: uplift | |
| [I][standing_desk_height:095]: If you want to make this change permanent, add the following to this sensor's configuration: | |
| [I][standing_desk_height:096]: variant: uplift | |
| [D][sensor:094]: 'Desk Height': Sending state 31.60000 in with 1 decimals of accuracy | |
| [D][sensor:094]: 'desk_height': Sending state 31.60000 in with 1 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40924.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 43.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 29764.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 46.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40904.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 55.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40904.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 46.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40904.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 42.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40904.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 34.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40656.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 35.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40904.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 38.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40904.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 40.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40904.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 32.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40904.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 32.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40904.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 36.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40904.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 37.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40856.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 38.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 35648.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 41.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40880.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 40.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40868.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 35.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40868.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 33.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40868.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 32.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40868.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 33.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40868.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 37.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40868.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 31.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40868.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 37.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40868.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 36.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40868.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 29.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 39020.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 50.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40620.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 35.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40840.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 35.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40840.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 37.00000 ms with 0 decimals of accuracy | |
| abort() was called at PC 0x401f5d0b on core 0 | |
| Backtrace:0x40083815:0x3ffe6ba00x400931f9:0x3ffe6bc0 0x400987bd:0x3ffe6be0 0x401f5d0b:0x3ffe6c60 0x401f5d52:0x3ffe6c80 0x401f5e4b:0x3ffe6ca0 0x401f5daa:0x3ffe6cc0 0x400de965:0x3ffe6ce0 0x4013082d:0x3ffe6d00 0x40159881:0x3ffe6d20 0x4015b6f7:0x3ffe6d40 | |
| ELF file SHA256: 0000000000000000 | |
| Rebooting... | |
| ets Jul 29 2019 12:21:46 | |
| rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) | |
| configsip: 0, SPIWP:0xee | |
| clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 | |
| mode:DIO, clock div:2 | |
| load:0x3fff0030,len:1184 | |
| load:0x40078000,len:13132 | |
| load:0x40080400,len:3036 | |
| entry 0x400805e4 | |
| [I][logger:359]: Log initialized | |
| [C][ota:483]: There have been 1 suspected unsuccessful boot attempts. | |
| [D][esp32.preferences:114]: Saving 1 preferences to flash... | |
| [D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed | |
| [I][app:029]: Running through setup()... | |
| [C][uart.arduino_esp32:077]: Setting up UART... | |
| [D][number:012]: 'Target Desk Height': Sending state 25.200001 | |
| [D][number:012]: 'Min Target Height': Sending state 25.200001 | |
| [D][number:012]: 'Max Target Height': Sending state 50.799999 | |
| [D][template.select:014]: Setting up Template Select | |
| [D][template.select:023]: State from initial (could not load stored index): in | |
| [D][select:015]: 'Height Units': Sending state in (index 0) | |
| [C][status_led:056]: Setting up Status LED... | |
| [C][light:035]: Setting up light 'Status LED'... | |
| [D][status_led:039]: 'Status LED': Setting initial state | |
| [D][status_led:050]: 'Status LED': Setting state OFF | |
| [D][light:036]: 'Status LED' Setting: | |
| [D][light:041]: Color mode: | |
| [D][light:047]: State: ON | |
| [D][standing_desk_height:066]: Decoder variant was not set in config; using decoder detection | |
| [I][standing_desk_height:036]: Starting decoder detection | |
| [D][standing_desk_height:057]: Attempting next decoder variant: jarvis | |
| [D][number:012]: 'target_desk_height': Sending state 25.200001 | |
| [D][text_sensor:064]: 'Upsy Desky Firmware Version': Sending state '2.0.0' | |
| [C][esp32_ble:027]: Setting up BLE... | |
| [C][wifi:038]: Setting up WiFi... | |
| [C][wifi:051]: Starting WiFi... | |
| [C][wifi:052]: Local MAC: 08:B6:1F:76:D8:7C | |
| [D][wifi:459]: Starting scan... | |
| [D][esp32.preferences:114]: Saving 1 preferences to flash... | |
| [D][esp32.preferences:143]: Saving 1 preferences to flash: 1 cached, 0 written, 0 failed | |
| [D][status_led:030]: Restoring light state ON | |
| [D][esp32_ble:270]: Enabling BLE... | |
| [D][esp32_ble_tracker:266]: Starting scan... | |
| [D][esp32_ble_server:077]: BLE server setup successfully | |
| [D][esp32_improv.component:077]: Creating Improv service | |
| [D][standing_desk_height:099]: Decoder jarvis does not appear to work; trying next decoder | |
| [D][standing_desk_height:057]: Attempting next decoder variant: uplift | |
| [D][standing_desk_height:099]: Decoder uplift does not appear to work; trying next decoder | |
| [D][standing_desk_height:057]: Attempting next decoder variant: omnidesk | |
| [D][standing_desk_height:099]: Decoder omnidesk does not appear to work; trying next decoder | |
| [W][standing_desk_height:044]: No valid decoder found. Please make sure your desk is reporting the height and you can see it on the keypad | |
| [D][wifi:474]: Found networks: | |
| [I][wifi:518]: - '<IOT WIFI SSID>' (26:E8:29:91:FF:76) [redacted]▂▄▆█ | |
| [D][wifi:519]: Channel: 11 | |
| [D][wifi:520]: RSSI: -64 dB | |
| [D][wifi:523]: - 'WIFI SSID'[redacted] (22:E8:29:91:FF:76) [redacted]▂▄▆█ | |
| [D][wifi:523]: - ''[redacted] (18:E8:29:91:FF:76) [redacted]▂▄▆█ | |
| [D][wifi:523]: - ''[redacted] (1E:E8:29:91:FF:76) [redacted]▂▄▆█ | |
| [D][wifi:523]: - 'La Red'[redacted] (BC:DF:58:F9:CB:4E) [redacted]▂▄▆█ | |
| [I][wifi:304]: WiFi Connecting to '<IOT WIFI SSID>'... | |
| [I][wifi:591]: WiFi Connected! | |
| [C][wifi:409]: Local MAC: 08:B6:1F:76:D8:7C | |
| [C][wifi:414]: SSID: '<IOT WIFI SSID>'[redacted] | |
| [C][wifi:415]: IP Address: 10.1.4.72 | |
| [C][wifi:417]: BSSID: 26:E8:29:91:FF:76[redacted] | |
| [C][wifi:418]: Hostname: 'upsy-desky-76d87c' | |
| [C][wifi:420]: Signal strength: -67 dB ▂▄▆█ | |
| [C][wifi:424]: Channel: 11 | |
| [C][wifi:425]: Subnet: 255.255.255.0 | |
| [C][wifi:426]: Gateway: 10.1.4.1 | |
| [C][wifi:427]: DNS1: 0.0.0.0 | |
| [C][wifi:428]: DNS2: 0.0.0.0 | |
| [D][wifi:600]: Disabling AP... | |
| [C][web_server:123]: Setting up web server... | |
| [C][ota:096]: Over-The-Air Updates: | |
| [C][ota:097]: Address: 10.1.4.72:3232 | |
| [C][ota:103]: OTA version: 2. | |
| [C][api:025]: Setting up Home Assistant API server... | |
| [I][app:062]: setup() finished successfully! | |
| [D][sensor:094]: 'Heap Free': Sending state 43228.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 0.00000 ms with 0 decimals of accuracy | |
| [I][app:102]: ESPHome version 2024.2.2 compiled on Mar 10 2024, 14:59:29 | |
| [I][app:104]: Project tj_horner.upsy_desky version 2.0.0 | |
| [C][status_led:065]: Status Led Light: | |
| [C][status_led:066]: Pin: GPIO23 | |
| [D][status_led:030]: Restoring light state ON | |
| [C][wifi:577]: WiFi: | |
| [C][wifi:409]: Local MAC: 08:B6:1F:76:D8:7C | |
| [C][wifi:414]: SSID: '<IOT WIFI SSID>'[redacted] | |
| [C][wifi:415]: IP Address: 10.1.4.72 | |
| [C][wifi:417]: BSSID: 26:E8:29:91:FF:76[redacted] | |
| [C][wifi:418]: Hostname: 'upsy-desky-76d87c' | |
| [C][wifi:420]: Signal strength: -66 dB ▂▄▆█ | |
| [C][wifi:424]: Channel: 11 | |
| [C][wifi:425]: Subnet: 255.255.255.0 | |
| [C][wifi:426]: Gateway: 10.1.4.1 | |
| [C][wifi:427]: DNS1: 0.0.0.0 | |
| [C][wifi:428]: DNS2: 0.0.0.0 | |
| [C][logger:447]: Logger: | |
| [C][logger:448]: Level: DEBUG | |
| [C][logger:449]: Log Baud Rate: 115200 | |
| [C][logger:451]: Hardware UART: UART0 | |
| [C][uart.arduino_esp32:137]: UART Bus 1: | |
| [C][uart.arduino_esp32:138]: TX Pin: GPIO16 | |
| [C][uart.arduino_esp32:139]: RX Pin: GPIO17 | |
| [C][uart.arduino_esp32:141]: RX Buffer Size: 256 | |
| [C][uart.arduino_esp32:143]: Baud Rate: 9600 baud | |
| [C][uart.arduino_esp32:144]: Data Bits: 8 | |
| [C][uart.arduino_esp32:145]: Parity: NONE | |
| [C][uart.arduino_esp32:146]: Stop bits: 1 | |
| [C][gpio.output:010]: GPIO Binary Output: | |
| [C][gpio.output:011]: Pin: GPIO21 | |
| [C][gpio.output:012]: Inverted: YES | |
| [C][gpio.output:010]: GPIO Binary Output: | |
| [C][gpio.output:011]: Pin: GPIO22 | |
| [C][gpio.output:012]: Inverted: YES | |
| [C][gpio.output:010]: GPIO Binary Output: | |
| [C][gpio.output:011]: Pin: GPIO21 | |
| [C][gpio.output:012]: Inverted: YES | |
| [C][gpio.output:010]: GPIO Binary Output: | |
| [C][gpio.output:011]: Pin: GPIO22 | |
| [C][gpio.output:012]: Inverted: YES | |
| [C][gpio.output:010]: GPIO Binary Output: | |
| [C][gpio.output:011]: Pin: GPIO19 | |
| [C][gpio.output:012]: Inverted: YES | |
| [C][gpio.output:010]: GPIO Binary Output: | |
| [C][gpio.output:011]: Pin: GPIO18 | |
| [C][gpio.output:012]: Inverted: YES | |
| [C][template.number:050]: Template Number 'Target Desk Height' | |
| [C][template.number:050]: Unit of Measurement: 'in' | |
| [C][template.number:051]: Optimistic: YES | |
| [C][template.number:052]: Update Interval: 60.0s | |
| [C][template.number:050]: Template Number 'Min Target Height' | |
| [C][template.number:051]: Optimistic: YES | |
| [C][template.number:052]: Update Interval: 60.0s | |
| [C][template.number:050]: Template Number 'Max Target Height' | |
| [C][template.number:051]: Optimistic: YES | |
| [C][template.number:052]: Update Interval: 60.0s | |
| [C][template.select:065]: Template Select 'Height Units' | |
| [C][template.select:066]: Update Interval: 60.0s | |
| [C][template.select:069]: Optimistic: YES | |
| [C][template.select:070]: Initial Option: in | |
| [C][template.select:071]: Restore Value: YES | |
| [C][light:103]: Light 'Status LED' | |
| [C][standing_desk_height:113]: Standing Desk Height: | |
| [C][standing_desk_height:114]: Height Sensor 'Desk Height' | |
| [C][standing_desk_height:114]: State Class: '' | |
| [C][standing_desk_height:114]: Unit of Measurement: 'in' | |
| [C][standing_desk_height:114]: Accuracy Decimals: 1 | |
| [C][standing_desk_height:114]: Icon: 'mdi:human-male-height-variant' | |
| [C][standing_desk_height:115]: Update Interval: 0.5s | |
| [C][standing_desk_height:118]: Decoder Variant: unknown | |
| [C][copy.sensor:015]: Copy Sensor 'desk_height' | |
| [C][copy.sensor:015]: State Class: '' | |
| [C][copy.sensor:015]: Unit of Measurement: 'in' | |
| [C][copy.sensor:015]: Accuracy Decimals: 1 | |
| [C][copy.sensor:015]: Icon: 'mdi:human-male-height-variant' | |
| [C][copy.number:020]: Copy Number 'target_desk_height' | |
| [C][copy.number:020]: Unit of Measurement: 'in' | |
| [C][copy.button:009]: Copy Button 'desk_preset_1' | |
| [C][copy.button:009]: Icon: 'mdi:numeric-1-box' | |
| [C][copy.button:009]: Copy Button 'desk_preset_2' | |
| [C][copy.button:009]: Icon: 'mdi:numeric-2-box' | |
| [C][copy.button:009]: Copy Button 'desk_preset_3' | |
| [C][copy.button:009]: Icon: 'mdi:numeric-3-box' | |
| [C][copy.button:009]: Copy Button 'desk_preset_4' | |
| [C][copy.button:009]: Icon: 'mdi:numeric-4-box' | |
| [C][restart.button:017]: Restart Button 'Restart' | |
| [C][bluetooth_proxy:088]: Bluetooth Proxy: | |
| [C][bluetooth_proxy:089]: Active: NO | |
| [C][project_version.text_sensor:016]: Project Version Text Sensor 'Upsy Desky Firmware Version' | |
| [C][project_version.text_sensor:016]: Icon: 'mdi:new-box' | |
| [C][esp32_ble:374]: ESP32 BLE: | |
| [C][esp32_ble:376]: MAC address: 08:B6:1F:76:D8:7E | |
| [C][esp32_ble:377]: IO Capability: none | |
| [C][esp32_ble_server:200]: ESP32 BLE Server: | |
| [C][esp32_ble_tracker:645]: BLE Tracker: | |
| [C][esp32_ble_tracker:646]: Scan Duration: 300 s | |
| [C][esp32_ble_tracker:647]: Scan Interval: 320.0 ms | |
| [C][esp32_ble_tracker:648]: Scan Window: 30.0 ms | |
| [C][esp32_ble_tracker:649]: Scan Type: ACTIVE | |
| [C][esp32_ble_tracker:650]: Continuous Scanning: True | |
| [C][esp32_improv.component:257]: ESP32 Improv: | |
| [C][esp32_improv.component:262]: Status Indicator: 'NO' | |
| [C][captive_portal:088]: Captive Portal: | |
| [C][web_server:168]: Web Server: | |
| [C][web_server:169]: Address: 10.1.4.72:80 | |
| [C][mdns:115]: mDNS: | |
| [C][mdns:116]: Hostname: upsy-desky-76d87c | |
| [C][ota:096]: Over-The-Air Updates: | |
| [C][ota:097]: Address: 10.1.4.72:3232 | |
| [C][ota:103]: OTA version: 2. | |
| [C][api:139]: API Server: | |
| [C][api:140]: Address: 10.1.4.72:6053 | |
| [C][api:144]: Using noise encryption: NO | |
| [C][improv_serial:032]: Improv Serial: | |
| [C][debug:064]: Debug component: | |
| [C][debug:066]: Device info 'Device Info' | |
| [C][debug:066]: Icon: 'mdi:chip' | |
| [C][debug:069]: Free space on heap 'Heap Free' | |
| [C][debug:069]: State Class: '' | |
| [C][debug:069]: Unit of Measurement: 'B' | |
| [C][debug:069]: Accuracy Decimals: 0 | |
| [C][debug:069]: Icon: 'mdi:counter' | |
| [C][debug:070]: Largest free heap block 'Heap Max Block' | |
| [C][debug:070]: State Class: '' | |
| [C][debug:070]: Unit of Measurement: 'B' | |
| [C][debug:070]: Accuracy Decimals: 0 | |
| [C][debug:070]: Icon: 'mdi:counter' | |
| [D][debug:076]: ESPHome version 2024.2.2 | |
| [D][debug:080]: Free Heap Size: 42740 bytes | |
| [D][debug:110]: Flash Chip: Size=4096kB Speed=40MHz Mode=DIO | |
| [D][debug:159]: Chip: Model=ESP32, Features=WIFI_BGN,BLE,BT, Cores=2, Revision=3 | |
| [D][debug:167]: ESP-IDF Version: v4.4.2 | |
| [D][debug:172]: EFuse MAC: 08:B6:1F:76:D8:7C | |
| [D][debug:272]: Reset Reason: Software Reset CPU | |
| [D][debug:317]: Wakeup Reason: Unknown | |
| [D][text_sensor:064]: 'Device Info': Sending state '2024.2.2|Flash: 4096kB Speed:40MHz Mode:DIO|Chip: ESP32 Features:WIFI_BGN,BLE,BT, Cores:2 Revision:3|ESP-IDF: v4.4.2|EFuse MAC: 08:B6:1F:76:D8:7C|Reset: Software Reset CPU|Wakeup: Unknown' | |
| [D][sensor:094]: 'Heap Free': Sending state 43148.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 4329.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 43148.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 36.00000 ms with 0 decimals of accuracy | |
| abort() was called at PC 0x401f5d0b on core 1 | |
| Backtrace:0x40083815:0x3ffcd4e00x400931f9:0x3ffcd500 0x400987bd:0x3ffcd520 0x401f5d0b:0x3ffcd5a0 0x401f5d52:0x3ffcd5c0 0x401f5e4b:0x3ffcd5e0 0x401f5daa:0x3ffcd600 0x401f6131:0x3ffcd620 0x401f6274:0x3ffcd640 0x401f63f1:0x3ffcd680 0x400e3beb:0x3ffcd6a0 0x400e3c2b:0x3ffcd6c0 0x400e3e6e:0x3ffcd6e0 0x400e3e4a:0x3ffcd700 0x400e3f9f:0x3ffcd720 0x400eb714:0x3ffcd7a0 0x400ead77:0x3ffcd800 0x400f2405:0x3ffcd840 0x400ebd55:0x3ffcd860 0x400ebd9a:0x3ffcd8b0 0x40211065:0x3ffcd8d0 0x40211151:0x3ffcd8f0 0x400f0ee4:0x3ffcd910 0x400f3f4a:0x3ffcd940 0x401018c9:0x3ffcd960 | |
| ELF file SHA256: 0000000000000000 | |
| Rebooting... | |
| ets Jul 29 2019 12:21:46 | |
| rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) | |
| configsip: 0, SPIWP:0xee | |
| clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 | |
| mode:DIO, clock div:2 | |
| load:0x3fff0030,len:1184 | |
| load:0x40078000,len:13132 | |
| load:0x40080400,len:3036 | |
| entry 0x400805e4 | |
| [I][logger:359]: Log initialized | |
| [C][ota:483]: There have been 2 suspected unsuccessful boot attempts. | |
| [D][esp32.preferences:114]: Saving 1 preferences to flash... | |
| [D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed | |
| [I][app:029]: Running through setup()... | |
| [C][uart.arduino_esp32:077]: Setting up UART... | |
| [D][number:012]: 'Target Desk Height': Sending state 25.200001 | |
| [D][number:012]: 'Min Target Height': Sending state 25.200001 | |
| [D][number:012]: 'Max Target Height': Sending state 50.799999 | |
| [D][template.select:014]: Setting up Template Select | |
| [D][template.select:023]: State from initial (could not load stored index): in | |
| [D][select:015]: 'Height Units': Sending state in (index 0) | |
| [C][status_led:056]: Setting up Status LED... | |
| [C][light:035]: Setting up light 'Status LED'... | |
| [D][status_led:039]: 'Status LED': Setting initial state | |
| [D][status_led:050]: 'Status LED': Setting state OFF | |
| [D][light:036]: 'Status LED' Setting: | |
| [D][light:041]: Color mode: | |
| [D][light:047]: State: ON | |
| [D][standing_desk_height:066]: Decoder variant was not set in config; using decoder detection | |
| [I][standing_desk_height:036]: Starting decoder detection | |
| [D][standing_desk_height:057]: Attempting next decoder variant: jarvis | |
| [D][number:012]: 'target_desk_height': Sending state 25.200001 | |
| [D][text_sensor:064]: 'Upsy Desky Firmware Version': Sending state '2.0.0' | |
| [C][esp32_ble:027]: Setting up BLE... | |
| [C][wifi:038]: Setting up WiFi... | |
| [C][wifi:051]: Starting WiFi... | |
| [C][wifi:052]: Local MAC: 08:B6:1F:76:D8:7C | |
| [D][wifi:459]: Starting scan... | |
| [D][esp32.preferences:114]: Saving 1 preferences to flash... | |
| [D][esp32.preferences:143]: Saving 1 preferences to flash: 1 cached, 0 written, 0 failed | |
| [D][status_led:030]: Restoring light state ON | |
| [D][esp32_ble:270]: Enabling BLE... | |
| [D][esp32_ble_tracker:266]: Starting scan... | |
| [D][esp32_ble_server:077]: BLE server setup successfully | |
| [D][esp32_improv.component:077]: Creating Improv service | |
| [D][standing_desk_height:099]: Decoder jarvis does not appear to work; trying next decoder | |
| [D][standing_desk_height:057]: Attempting next decoder variant: uplift | |
| [D][standing_desk_height:099]: Decoder uplift does not appear to work; trying next decoder | |
| [D][standing_desk_height:057]: Attempting next decoder variant: omnidesk | |
| [D][standing_desk_height:099]: Decoder omnidesk does not appear to work; trying next decoder | |
| [W][standing_desk_height:044]: No valid decoder found. Please make sure your desk is reporting the height and you can see it on the keypad | |
| [D][wifi:474]: Found networks: | |
| [I][wifi:518]: - '<IOT WIFI SSID>' (26:E8:29:91:FF:76) [redacted]▂▄▆█ | |
| [D][wifi:519]: Channel: 11 | |
| [D][wifi:520]: RSSI: -66 dB | |
| [D][wifi:523]: - 'WIFI SSID'[redacted] (22:E8:29:91:FF:76) [redacted]▂▄▆█ | |
| [D][wifi:523]: - ''[redacted] (18:E8:29:91:FF:76) [redacted]▂▄▆█ | |
| [D][wifi:523]: - ''[redacted] (1E:E8:29:91:FF:76) [redacted]▂▄▆█ | |
| [D][wifi:523]: - 'La Red'[redacted] (BC:DF:58:F9:CB:4E) [redacted]▂▄▆█ | |
| [I][wifi:304]: WiFi Connecting to '<IOT WIFI SSID>'... | |
| [I][wifi:591]: WiFi Connected! | |
| [C][wifi:409]: Local MAC: 08:B6:1F:76:D8:7C | |
| [C][wifi:414]: SSID: '<IOT WIFI SSID>'[redacted] | |
| [C][wifi:415]: IP Address: 10.1.4.72 | |
| [C][wifi:417]: BSSID: 26:E8:29:91:FF:76[redacted] | |
| [C][wifi:418]: Hostname: 'upsy-desky-76d87c' | |
| [C][wifi:420]: Signal strength: -65 dB ▂▄▆█ | |
| [C][wifi:424]: Channel: 11 | |
| [C][wifi:425]: Subnet: 255.255.255.0 | |
| [C][wifi:426]: Gateway: 10.1.4.1 | |
| [C][wifi:427]: DNS1: 0.0.0.0 | |
| [C][wifi:428]: DNS2: 0.0.0.0 | |
| [D][wifi:600]: Disabling AP... | |
| [C][web_server:123]: Setting up web server... | |
| [C][ota:096]: Over-The-Air Updates: | |
| [C][ota:097]: Address: 10.1.4.72:3232 | |
| [C][ota:103]: OTA version: 2. | |
| [W][ota:107]: Last Boot was an unhandled reset, will proceed to safe mode in 8 restarts | |
| [C][api:025]: Setting up Home Assistant API server... | |
| [I][app:062]: setup() finished successfully! | |
| [D][sensor:094]: 'Heap Free': Sending state 43476.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 0.00000 ms with 0 decimals of accuracy | |
| [I][app:102]: ESPHome version 2024.2.2 compiled on Mar 10 2024, 14:59:29 | |
| [I][app:104]: Project tj_horner.upsy_desky version 2.0.0 | |
| [C][status_led:065]: Status Led Light: | |
| [C][status_led:066]: Pin: GPIO23 | |
| [D][status_led:030]: Restoring light state ON | |
| [C][wifi:577]: WiFi: | |
| [C][wifi:409]: Local MAC: 08:B6:1F:76:D8:7C | |
| [C][wifi:414]: SSID: '<IOT WIFI SSID>'[redacted] | |
| [C][wifi:415]: IP Address: 10.1.4.72 | |
| [C][wifi:417]: BSSID: 26:E8:29:91:FF:76[redacted] | |
| [C][wifi:418]: Hostname: 'upsy-desky-76d87c' | |
| [C][wifi:420]: Signal strength: -65 dB ▂▄▆█ | |
| [C][wifi:424]: Channel: 11 | |
| [C][wifi:425]: Subnet: 255.255.255.0 | |
| [C][wifi:426]: Gateway: 10.1.4.1 | |
| [C][wifi:427]: DNS1: 0.0.0.0 | |
| [C][wifi:428]: DNS2: 0.0.0.0 | |
| [C][logger:447]: Logger: | |
| [C][logger:448]: Level: DEBUG | |
| [C][logger:449]: Log Baud Rate: 115200 | |
| [C][logger:451]: Hardware UART: UART0 | |
| [C][uart.arduino_esp32:137]: UART Bus 1: | |
| [C][uart.arduino_esp32:138]: TX Pin: GPIO16 | |
| [C][uart.arduino_esp32:139]: RX Pin: GPIO17 | |
| [C][uart.arduino_esp32:141]: RX Buffer Size: 256 | |
| [C][uart.arduino_esp32:143]: Baud Rate: 9600 baud | |
| [C][uart.arduino_esp32:144]: Data Bits: 8 | |
| [C][uart.arduino_esp32:145]: Parity: NONE | |
| [C][uart.arduino_esp32:146]: Stop bits: 1 | |
| [C][gpio.output:010]: GPIO Binary Output: | |
| [C][gpio.output:011]: Pin: GPIO21 | |
| [C][gpio.output:012]: Inverted: YES | |
| [C][gpio.output:010]: GPIO Binary Output: | |
| [C][gpio.output:011]: Pin: GPIO22 | |
| [C][gpio.output:012]: Inverted: YES | |
| [C][gpio.output:010]: GPIO Binary Output: | |
| [C][gpio.output:011]: Pin: GPIO21 | |
| [C][gpio.output:012]: Inverted: YES | |
| [C][gpio.output:010]: GPIO Binary Output: | |
| [C][gpio.output:011]: Pin: GPIO22 | |
| [C][gpio.output:012]: Inverted: YES | |
| [C][gpio.output:010]: GPIO Binary Output: | |
| [C][gpio.output:011]: Pin: GPIO19 | |
| [C][gpio.output:012]: Inverted: YES | |
| [C][gpio.output:010]: GPIO Binary Output: | |
| [C][gpio.output:011]: Pin: GPIO18 | |
| [C][gpio.output:012]: Inverted: YES | |
| [C][template.number:050]: Template Number 'Target Desk Height' | |
| [C][template.number:050]: Unit of Measurement: 'in' | |
| [C][template.number:051]: Optimistic: YES | |
| [C][template.number:052]: Update Interval: 60.0s | |
| [C][template.number:050]: Template Number 'Min Target Height' | |
| [C][template.number:051]: Optimistic: YES | |
| [C][template.number:052]: Update Interval: 60.0s | |
| [C][template.number:050]: Template Number 'Max Target Height' | |
| [C][template.number:051]: Optimistic: YES | |
| [C][template.number:052]: Update Interval: 60.0s | |
| [C][template.select:065]: Template Select 'Height Units' | |
| [C][template.select:066]: Update Interval: 60.0s | |
| [C][template.select:069]: Optimistic: YES | |
| [C][template.select:070]: Initial Option: in | |
| [C][template.select:071]: Restore Value: YES | |
| [C][light:103]: Light 'Status LED' | |
| [C][standing_desk_height:113]: Standing Desk Height: | |
| [C][standing_desk_height:114]: Height Sensor 'Desk Height' | |
| [C][standing_desk_height:114]: State Class: '' | |
| [C][standing_desk_height:114]: Unit of Measurement: 'in' | |
| [C][standing_desk_height:114]: Accuracy Decimals: 1 | |
| [C][standing_desk_height:114]: Icon: 'mdi:human-male-height-variant' | |
| [C][standing_desk_height:115]: Update Interval: 0.5s | |
| [C][standing_desk_height:118]: Decoder Variant: unknown | |
| [C][copy.sensor:015]: Copy Sensor 'desk_height' | |
| [C][copy.sensor:015]: State Class: '' | |
| [C][copy.sensor:015]: Unit of Measurement: 'in' | |
| [C][copy.sensor:015]: Accuracy Decimals: 1 | |
| [C][copy.sensor:015]: Icon: 'mdi:human-male-height-variant' | |
| [C][copy.number:020]: Copy Number 'target_desk_height' | |
| [C][copy.number:020]: Unit of Measurement: 'in' | |
| [C][copy.button:009]: Copy Button 'desk_preset_1' | |
| [C][copy.button:009]: Icon: 'mdi:numeric-1-box' | |
| [C][copy.button:009]: Copy Button 'desk_preset_2' | |
| [C][copy.button:009]: Icon: 'mdi:numeric-2-box' | |
| [C][copy.button:009]: Copy Button 'desk_preset_3' | |
| [C][copy.button:009]: Icon: 'mdi:numeric-3-box' | |
| [C][copy.button:009]: Copy Button 'desk_preset_4' | |
| [C][copy.button:009]: Icon: 'mdi:numeric-4-box' | |
| [C][restart.button:017]: Restart Button 'Restart' | |
| [C][bluetooth_proxy:088]: Bluetooth Proxy: | |
| [C][bluetooth_proxy:089]: Active: NO | |
| [C][project_version.text_sensor:016]: Project Version Text Sensor 'Upsy Desky Firmware Version' | |
| [C][project_version.text_sensor:016]: Icon: 'mdi:new-box' | |
| [C][esp32_ble:374]: ESP32 BLE: | |
| [C][esp32_ble:376]: MAC address: 08:B6:1F:76:D8:7E | |
| [C][esp32_ble:377]: IO Capability: none | |
| [C][esp32_ble_server:200]: ESP32 BLE Server: | |
| [C][esp32_ble_tracker:645]: BLE Tracker: | |
| [C][esp32_ble_tracker:646]: Scan Duration: 300 s | |
| [C][esp32_ble_tracker:647]: Scan Interval: 320.0 ms | |
| [C][esp32_ble_tracker:648]: Scan Window: 30.0 ms | |
| [C][esp32_ble_tracker:649]: Scan Type: ACTIVE | |
| [C][esp32_ble_tracker:650]: Continuous Scanning: True | |
| [C][esp32_improv.component:257]: ESP32 Improv: | |
| [C][esp32_improv.component:262]: Status Indicator: 'NO' | |
| [C][captive_portal:088]: Captive Portal: | |
| [C][web_server:168]: Web Server: | |
| [C][web_server:169]: Address: 10.1.4.72:80 | |
| [C][mdns:115]: mDNS: | |
| [C][mdns:116]: Hostname: upsy-desky-76d87c | |
| [C][ota:096]: Over-The-Air Updates: | |
| [C][ota:097]: Address: 10.1.4.72:3232 | |
| [C][ota:103]: OTA version: 2. | |
| [W][ota:107]: Last Boot was an unhandled reset, will proceed to safe mode in 8 restarts | |
| [C][api:139]: API Server: | |
| [C][api:140]: Address: 10.1.4.72:6053 | |
| [C][api:144]: Using noise encryption: NO | |
| [C][improv_serial:032]: Improv Serial: | |
| [C][debug:064]: Debug component: | |
| [C][debug:066]: Device info 'Device Info' | |
| [C][debug:066]: Icon: 'mdi:chip' | |
| [C][debug:069]: Free space on heap 'Heap Free' | |
| [C][debug:069]: State Class: '' | |
| [C][debug:069]: Unit of Measurement: 'B' | |
| [C][debug:069]: Accuracy Decimals: 0 | |
| [C][debug:069]: Icon: 'mdi:counter' | |
| [C][debug:070]: Largest free heap block 'Heap Max Block' | |
| [C][debug:070]: State Class: '' | |
| [C][debug:070]: Unit of Measurement: 'B' | |
| [C][debug:070]: Accuracy Decimals: 0 | |
| [C][debug:070]: Icon: 'mdi:counter' | |
| [D][debug:076]: ESPHome version 2024.2.2 | |
| [D][debug:080]: Free Heap Size: 42792 bytes | |
| [D][debug:110]: Flash Chip: Size=4096kB Speed=40MHz Mode=DIO | |
| [D][debug:159]: Chip: Model=ESP32, Features=WIFI_BGN,BLE,BT, Cores=2, Revision=3 | |
| [D][debug:167]: ESP-IDF Version: v4.4.2 | |
| [D][debug:172]: EFuse MAC: 08:B6:1F:76:D8:7C | |
| [D][debug:272]: Reset Reason: Software Reset CPU | |
| [D][debug:317]: Wakeup Reason: Unknown | |
| [D][text_sensor:064]: 'Device Info': Sending state '2024.2.2|Flash: 4096kB Speed:40MHz Mode:DIO|Chip: ESP32 Features:WIFI_BGN,BLE,BT, Cores:2 Revision:3|ESP-IDF: v4.4.2|EFuse MAC: 08:B6:1F:76:D8:7C|Reset: Software Reset CPU|Wakeup: Unknown' | |
| [D][sensor:094]: 'Heap Free': Sending state 43184.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 4318.00000 ms with 0 decimals of accuracy | |
| [D][api:102]: Accepted 10.1.4.9 | |
| [D][api.connection:1121]: Home Assistant 2024.2.5 (10.1.4.9): Connected successfully | |
| [D][sensor:094]: 'Heap Free': Sending state 41840.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 33.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 40244.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 38.00000 ms with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Free': Sending state 41840.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Heap Max Block': Sending state 21492.00000 B with 0 decimals of accuracy | |
| [D][sensor:094]: 'Loop Time': Sending state 36.00000 ms with 0 decimals of accuracy |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment