Anki Vector boot up (115200 8N1)

gistfile1.txt

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2.C2-00037
S - IMAGE_VARIANT_STRING=DAASANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000000e1
B -      1566 - PBL, Start
B -      4542 - bootable_media_detect_entry, Start
B -     43424 - bootable_media_detect_success, Start
B -     43428 - elf_loader_entry, Start
B -     44715 - auth_hash_seg_entry, Start
B -     64974 - auth_hash_seg_exit, Start
B -     79485 - elf_segs_hash_verify_entry, Start
B -    138572 - PBL, End
B -    120597 - SBL1, Start
B -    166347 - boot_flash_init, Start
D -        30 - boot_flash_init, Delta
B -    171562 - boot_config_data_table_init, Start
D -     11803 - boot_config_data_table_init, Delta - (534 Bytes)
B -    186995 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:2,Subtype:8
B -    192241 - pm_device_init, Start
B -    194742 - pm_device_init, TEST - MSM8909 detected
B -    199043 - pm_device_init, INFO - PM8916 is selected
B -    212524 - PM_SET_VAL:Skip
D -     19398 - pm_device_init, Delta
B -    213896 - sbl1_ddr_set_params, Start
B -    216367 - cpr_init, Start
D -         0 - cpr_init, Delta
B -    221948 - Pre_DDR_clock_init, Start
D -       183 - Pre_DDR_clock_init, Delta
D -         0 - sbl1_ddr_set_params, Delta
B -    234850 - pm_driver_init, Start
B -    241773 - --> Charge init
B -      3795 - battery voltage
B -    245250 - boot up
B -        10 - Current status
D -     10644 - pm_driver_init, Delta
B -    257298 - clock_init, Start
D -       152 - clock_init, Delta
B -    726113 - Image Load, Start
D -    147285 - QSEE Image Loaded, Delta - (462088 Bytes)
B -    873428 - Image Load, Start
D -       244 - SEC Image Loaded, Delta - (2048 Bytes)
B -    881846 - sbl1_efs_handle_cookies, Start
D -       640 - sbl1_efs_handle_cookies, Delta
B -    888434 - Image Load, Start
D -     76372 - RPM Image Loaded, Delta - (156468 Bytes)
B -    964837 - Image Load, Start
D -    123220 - APPSBL Image Loaded, Delta - (375868 Bytes)
B -   1088118 - QSEE Execution, Start
D -       366 - QSEE Execution, Delta
B -   1093852 - SBL1, End
D -    975542 - SBL1, Delta
S - Throughput, 34000 KB/s  (997006 Bytes,  29212 us)
S - DDR Frequency, 400 MHz
Android Bootloader - UART_DM Initialized!!!
[290] Channel alloc freed
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.66-perf (build@vic-os-build-071018) (gcc version 4.9.3 (GCC) ) #1 SMP PREEMPT Fri Apr 5 17:26:37 PDT 2019
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: ANKI Victor Headboard
[    0.000000] Reserved memory: reserved region for node 'external_image__region@0': base 0x87a00000, size 6 MiB
[    0.000000] Reserved memory: reserved region for node 'modem_adsp_region@0': base 0x88000000, size 36 MiB
[    0.000000] Reserved memory: reserved region for node 'pheripheral_region@0': base 0x8a400000, size 7 MiB
[    0.000000] Reserved memory: reserved region for node 'splash_region@83000000': base 0x83000000, size 12 MiB
[    0.000000] Removed memory: created DMA memory pool at 0x87a00000, size 6 MiB
[    0.000000] Reserved memory: initialized node external_image__region@0, compatible id removed-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x88000000, size 36 MiB
[    0.000000] Reserved memory: initialized node modem_adsp_region@0, compatible id removed-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x8a400000, size 7 MiB
[    0.000000] Reserved memory: initialized node pheripheral_region@0, compatible id removed-dma-pool
[    0.000000] Reserved memory: allocated memory for 'venus_qseecom_region@0' node: base 0x8f800000, size 8 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x8f800000, size 8 MiB
[    0.000000] Reserved memory: initialized node venus_qseecom_region@0, compatible id shared-dma-pool
[    0.000000] Reserved memory: allocated memory for 'audio_region@0' node: base 0x9f800000, size 4 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x9f800000, size 4 MiB
[    0.000000] Reserved memory: initialized node audio_region@0, compatible id shared-dma-pool
[    0.000000] Reserved memory: allocated memory for 'adsp_region@0' node: base 0x9f400000, size 4 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x9f400000, size 4 MiB
[    0.000000] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
[    0.000000] cma: Reserved 16 MiB at 0x9e400000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] PERCPU: Embedded 10 pages/cpu @dfd59000 s9984 r8192 d22784 u40960
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 116996
[    0.000000] Kernel command line:  androidboot.bootdevice=7824900.sdhci androidboot.authorized_kernel=true androidboot.baseband=apqnoinitrd ro console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1 rootwait androidboot.bootdevice=7824900.sdhci mem=511M dm-verity.dev_wait=1 dm="system none ro,0 1179648 verity 1 179:22 179:22 4096 4096 147456 147457 sha256 757fb7211ca70c0cd584f51c9ff002cb13b67a29c7c8f1121f4124f371d1d7e7 ab537db38f41ee4789f0ceee247dabe1c3093cd6875e35064a4c5f6b46785f82" root=/dev/dm-0 androidboot.slot_suffix=_a rootwait ro
[    0.000000] device-mapper: init: will configure 1 devices
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 398620K/472064K available (9216K kernel code, 918K rwdata, 4112K rodata, 309K init, 1328K bss, 73444K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0000000 - 0xff000000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdff00000   ( 511 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0a00000   (10208 kB)
[    0.000000]       .init : 0xc0f00000 - 0xc0f4d700   ( 310 kB)
[    0.000000]       .data : 0xc1000000 - 0xc10e5970   ( 919 kB)
[    0.000000]        .bss : 0xc10e80c4 - 0xc1234248   (1329 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
[    0.000000] MPM 1 irq mapping errored -517
[    0.000000] NO_HZ: Clearing 0 from nohz_full range for timekeeping
[    0.000000] NO_HZ: Full dynticks CPUs: 1-3.
[    0.000000] 	Offload RCU callbacks from CPUs: 1-3.
[    0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[    0.000022] Switching to timer-based delay loop, resolution 52ns
[    0.000038] Switched to clocksource arch_sys_counter
[    0.000885] Console: colour dummy device 80x30
[    0.000904] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000918] pid_max: default: 32768 minimum: 301
[    0.000999] Security Framework initialized
[    0.001089] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001102] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001747] Initializing cgroup subsys freezer
[    0.001766] Initializing cgroup subsys debug
[    0.001808] CPU: Testing write buffer coherency: ok
[    0.002145] /cpus/cpu@0 missing clock-frequency property
[    0.002164] /cpus/cpu@1 missing clock-frequency property
[    0.002179] /cpus/cpu@2 missing clock-frequency property
[    0.002196] /cpus/cpu@3 missing clock-frequency property
[    0.002324] Setting up static identity map for 0x80982b08 - 0x80982b60
[    0.032819] MSM Memory Dump base table set up
[    0.032856] MSM Memory Dump apps data table set up
[    0.037388] CPU1: Booted secondary processor
[    0.041433] CPU2: Booted secondary processor
[    0.045414] CPU3: Booted secondary processor
[    0.045516] Brought up 4 CPUs
[    0.045541] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.045548] CPU: All CPU(s) started in SVC mode.
[    0.046495] devtmpfs: initialized
[    0.050753] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.054430] pinctrl core: initialized pinctrl subsystem
[    0.054842] regulator-dummy: no parameters
[    0.100618] NET: Registered protocol family 16
[    0.103184] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.170110] cpuidle: using governor ladder
[    0.190102] cpuidle: using governor menu
[    0.210093] cpuidle: using governor qcom
[    0.225354] irq: no irq domain found for /soc/pinctrl@1000000 !
[    0.228695] spmi_pmic_arb 200f000.qcom,spmi: missing property: qcom,pmic-arb-max-peripherals
[    0.228712] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
[    0.229192] spmi_pmic_arb 200f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
[    0.233769] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
[    0.234071] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
[    0.235635] platform 1de0000.qcom,venus: assigned reserved memory node venus_qseecom_region@0
[    0.238379] platform soc:qcom,mdsprpc-mem: assigned reserved memory node adsp_region@0
[    0.239984] platform a21b000.qcom,pronto: assigned reserved memory node pheripheral_region@0
[    0.240340] platform 4080000.qcom,mss: assigned reserved memory node modem_adsp_region@0
[    0.241619] mem_acc_corner: 0 <--> 0 mV 
[    0.245852] hw-breakpoint: Failed to enable monitor mode on CPU 0.
[    0.248162] __of_mpm_init(): MPM driver mapping exists
[    0.248739] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.248751] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.248762] smd_open() before smd_init()
[    0.250462] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.250546] msm_smem_init: unable to create logging context
[    0.252432] msm_smd_init: unable to create SMD logging context
[    0.252444] msm_smd_init: unable to create SMSM logging context
[    0.254138] smd_channel_probe_now: allocation table not initialized
[    0.254270] smd_channel_probe_now: allocation table not initialized
[    0.257492] 8916_s2: 1050 <--> 1350 mV at 1225 mV normal idle 
[    0.257668] spm_regulator_probe: name=8916_s2, range=LV, voltage=1225000 uV, mode=PWM, step rate=1200 uV/us
[    0.258244] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000)
[    0.258287] cpr_read_fuse_revision: apc_corner: fuse revision = 3
[    0.258307] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x5041482217f550da, speed_bits = 0
[    0.258399] cpr_pvs_per_corner_init: apc_corner: Warning: initial voltage[2] 1025000 below floor 1050000
[    0.258414] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1050000 1250000] uV
[    0.258426] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
[    0.258438] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1155000] uV
[    0.262439] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
[    0.262453] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
[    0.262471] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
[    0.262483] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
[    0.262765] Failed to create IPC log0
[    0.262774] Failed to create IPC log1
[    0.262780] Failed to create IPC log2
[    0.262787] Failed to create IPC log3
[    0.262793] Failed to create IPC log4
[    0.263292] sps:sps is ready.
[    0.267228] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.267242] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.268066] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.268602] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.269132] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.269634] pm8909_s1_corner_so: 0 <--> 0 mV at 0 mV normal idle 
[    0.270392] 8916_l1: 1225 mV normal idle 
[    0.271095] 8916_l2: 1200 mV normal idle 
[    0.271795] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle 
[    0.272326] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.272829] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle 
[    0.273563] 8916_l4: 1800 mV normal idle 
[    0.274278] 8916_l5: 1800 mV normal idle 
[    0.274959] 8916_l6: 1800 mV normal idle 
[    0.275636] 8916_l7: 1800 mV normal idle 
[    0.276125] 8916_l7_ao: 1800 mV normal idle 
[    0.276593] 8916_l7_so: 1800 mV normal idle 
[    0.277267] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle 
[    0.277933] 8916_l9: 3300 mV normal idle 
[    0.278613] 8916_l10: 2700 <--> 2800 mV at 2700 mV normal idle 
[    0.279307] 8916_l11: 1800 <--> 2950 mV at 1800 mV normal idle 
[    0.279975] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle 
[    0.280671] 8916_l13: 3075 mV normal idle 
[    0.281366] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle 
[    0.282046] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle 
[    0.282739] 8916_l17: 2850 mV normal idle 
[    0.283440] 8916_l18: 2700 mV normal idle 
[    0.284129] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle 
[    0.284830] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle 
[    0.285517] 8916_l16: 1800 <--> 3300 mV at 1800 mV normal idle 
[    0.285777] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.286136] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000)
[    0.286182] cpr_read_fuse_revision: apc_corner: fuse revision = 3
[    0.286202] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x5041482217f550da, speed_bits = 0
[    0.286292] cpr_pvs_per_corner_init: apc_corner: Warning: initial voltage[2] 1025000 below floor 1050000
[    0.286307] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1050000 1250000] uV
[    0.286320] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV
[    0.286332] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1155000] uV
[    0.286552] cpr_init_cpr_parameters: apc_corner: up threshold = 0, down threshold = 2
[    0.286580] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
[    0.286612] cpr_init_cpr_efuse: apc_corner: [row:26] = 0x588c8e0323d1322b
[    0.286633] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0
[    0.286649] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 803
[    0.286662] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 803
[    0.286676] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1224
[    0.286745] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
[    0.286757] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.901
[    0.286773] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 803
[    0.286782] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 803
[    0.286791] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 803
[    0.286800] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 803
[    0.286809] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 982
[    0.286819] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1069
[    0.286828] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1155
[    0.286837] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[8] = 1207
[    0.286846] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[9] = 1224
[    0.286979] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
[    0.287464] apc_corner: 0 <--> 0 mV 
[    0.287995] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
[    0.288409] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.288424] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.288433] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
[    0.289293] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.289307] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.289320] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.289330] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.293963] qcom,rpmcc-8909 1800000.qcom,rpmcc: Registered RPM clocks.
[    0.300972] qcom,gcc-8909 1800000.qcom,gcc: Registered GCC clocks
[    0.301372] clock-a7 b011050.qcom,clock-a7: Speed bin: 0 PVS Version: 0
[    0.301446] a7ssmux: set OPP pair(200000000 Hz: 1 uV) on cpu0
[    0.301486] a7ssmux: set OPP pair(1267200000 Hz: 9 uV) on cpu0
[    0.357030] KPI: Bootloader start count = 37892
[    0.357041] KPI: Bootloader end count = 47730
[    0.357049] KPI: Bootloader display count = 1615870036
[    0.357057] KPI: Bootloader load kernel count = 2658
[    0.357065] KPI: Kernel MPM timestamp = 75409
[    0.357072] KPI: Kernel MPM Clock frequency = 32768
[    0.357101] socinfo_print: v0.10, id=265, ver=2.0, raw_id=2408, raw_ver=1, hw_plat=8, hw_plat_ver=65538
[    0.357101]  accessory_chip=0, hw_plat_subtype=8, pmic_model=65547, pmic_die_revision=131072 foundry_id=1 serial_number=401952986
[    0.358509] SCSI subsystem initialized
[    0.359122] usbcore: registered new interface driver usbfs
[    0.359207] usbcore: registered new interface driver hub
[    0.359371] usbcore: registered new device driver usb
[    0.360014] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
[    0.360168] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.360184] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.361408] media: Linux media interface: v0.10
[    0.361490] Linux video capture interface: v2.00
[    0.361805] BATTERY: batterydata_init: Battery-data device created!
[    0.362772] cpufreq: driver msm up and running
[    0.363214] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node venus_qseecom_region@0
[    0.363417] platform soc:qcom,ion:qcom,ion-heap@28: assigned reserved memory node audio_region@0
[    0.363605] platform soc:qcom,ion:qcom,ion-heap@26: assigned reserved memory node modem_adsp_region@0
[    0.363789] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region@0
[    0.364107] ION heap system created
[    0.364223] ION heap qsecom created at 0x8f800000 with size 800000
[    0.364236] ION heap audio created at 0x9f800000 with size 400000
[    0.364248] ION heap pil_2 created at 0x88000000 with size 2400000
[    0.364258] ION heap adsp created at 0x9f400000 with size 400000
[    0.364630] msm_bus_fabric_init_driver
[    0.377873] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from CBL (external power supply) and 'cold' boot
[    0.377896] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Unknown power-off reason
[    0.378124] input: qpnp_pon as /devices/virtual/input/input0
[    0.378791] PMIC@SID0: PM8916 v2.0 options: 0, 2, 0, 0
[    0.379069] gdsc_venus: no parameters
[    0.379340] gdsc_mdss: no parameters
[    0.379603] gdsc_vfe: no parameters
[    0.379804] gdsc_oxili_gx: no parameters
[    0.380010] gdsc_venus_core0: fast normal 
[    0.380625] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at e0320000, with 2 ctx banks
[    0.381377] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at e0380000, with 22 ctx banks
[    0.386650] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[    0.386852] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[    0.387031] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context MSA0_Audio using bank 2
[    0.387216] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[    0.387407] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[    0.387596] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
[    0.387788] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[    0.387980] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[    0.388169] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[    0.388351] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[    0.388536] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
[    0.388728] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
[    0.388910] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
[    0.389096] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[    0.389295] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[    0.389498] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[    0.389691] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[    0.389891] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[    0.390122] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[    0.390322] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[    0.390511] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[    0.390698] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context qpic using bank 10
[    0.390889] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context wlan using bank 17
[    0.391081] msm_iommu_ctx 1e3f000.qcom,iommu-ctx: context periph_CE_secure using bank 31
[    0.393850] Advanced Linux Sound Architecture Driver Initialized.
[    0.394971] Bluetooth: ddc45ed8
[    0.395006] NET: Registered protocol family 31
[    0.395012] Bluetooth: ddc45ed8
[    0.395022] Bluetooth: ddc45ed0Bluetooth: ddc45ec0
[    0.395074] Bluetooth: ddc45ec0[    0.395350] cfg80211: Calling CRDA to update world regulatory domain
[    0.395375] cfg80211: World regulatory domain updated:
[    0.395381] cfg80211:  DFS Master region: unset
[    0.395392] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    0.395401] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.395409] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    0.395416] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    0.395424] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.395431] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.395439] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.395446] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    0.395454] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    0.396276] Switched to clocksource arch_sys_counter
[    0.405825] NET: Registered protocol family 2
[    0.406411] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.406449] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.406498] TCP: Hash tables configured (established 4096 bind 4096)
[    0.406530] TCP: reno registered
[    0.406540] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.406560] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.406702] NET: Registered protocol family 1
[    0.407438] Trying to unpack rootfs image as initramfs...
[    0.738200] Freeing initrd memory: 5820K
[    0.739656] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.741728] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.742215] vmscan: error setting kswapd cpu affinity mask
[    0.746682] VFS: Disk quotas dquot_6.5.2
[    0.746819] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.749569] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.749584] io scheduler noop registered
[    0.749594] io scheduler deadline registered
[    0.749623] io scheduler cfq registered (default)
[    0.752482] msm_smp2p_init: unable to create log context
[    0.753497] qmi_log_init: Unable to create QMI IPC logging for Req/Resp
[    0.753505] logging for Indications: Unable to create QMI IPC qmi_log_init[    0.753727] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[    0.754138] apr_init: Unable to create ipc log context
[    0.758774] In memshare_probe, Memshare probe success
[    0.760915] msm_rpm_log_probe: OK
[    0.761993] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
[    0.764036] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id.
[    0.764883] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[    0.764924] AXI: get_pdata(): Error: Client name not found
[    0.764930] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[    0.764935] msm_serial_hsl_probe: Bus scaling is disabled
[    0.765039] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 32, base_baud = 460800) is a MSM
[    0.765089] msm_hsl_console_setup: console setup on port #0
[    2.851252] console [ttyHSL0] enabled
[    2.855350] msm_serial_hsl_init: driver initialized
[    2.859733] smd_tty_log_init: Unable to create IPC log
[    2.868573] diag: Failed to create IPC logging context
[    2.880739] ------------[ cut here ]------------
[    2.884326] WARNING: CPU: 2 PID: 1 at /mnt/devhomes/build/work/83941694d19f355d/kernel/msm-3.18/drivers/gpu/msm/kgsl_pwrctrl.c:2080 kgsl_pwrctrl_clk_set_rate+0x34/0x48()
[    2.899445] KGSL:rbbmtimer_clk set freq -22 failed:-22
[    2.904540] Modules linked in:
[    2.907583] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.18.66-perf #1
[    2.914020] [<c010d5d8>] (unwind_backtrace) from [<c010a484>] (show_stack+0x10/0x14)
[    2.921736] [<c010a484>] (show_stack) from [<c097ae2c>] (dump_stack+0x80/0xa0)
[    2.928940] [<c097ae2c>] (dump_stack) from [<c011add8>] (warn_slowpath_common+0x64/0x88)
[    2.937013] [<c011add8>] (warn_slowpath_common) from [<c011ae28>] (warn_slowpath_fmt+0x2c/0x3c)
[    2.945694] [<c011ae28>] (warn_slowpath_fmt) from [<c03ad860>] (kgsl_pwrctrl_clk_set_rate+0x34/0x48)
[    2.954809] [<c03ad860>] (kgsl_pwrctrl_clk_set_rate) from [<c03b0954>] (kgsl_pwrctrl_init+0x2c0/0x754)
[    2.964097] [<c03b0954>] (kgsl_pwrctrl_init) from [<c03a54dc>] (kgsl_device_platform_probe+0xd4/0x5c8)
[    2.973386] [<c03a54dc>] (kgsl_device_platform_probe) from [<c03d0710>] (adreno_probe+0x400/0x5a8)
[    2.982326] [<c03d0710>] (adreno_probe) from [<c03dec88>] (platform_drv_probe+0x30/0x7c)
[    2.990399] [<c03dec88>] (platform_drv_probe) from [<c03dd348>] (driver_probe_device+0x134/0x358)
[    2.999252] [<c03dd348>] (driver_probe_device) from [<c03dd5d4>] (__driver_attach+0x68/0x8c)
[    3.007673] [<c03dd5d4>] (__driver_attach) from [<c03db888>] (bus_for_each_dev+0x6c/0x90)
[    3.015832] [<c03db888>] (bus_for_each_dev) from [<c03dc9a4>] (bus_add_driver+0x110/0x238)
[    3.024079] [<c03dc9a4>] (bus_add_driver) from [<c03dddc8>] (driver_register+0x9c/0xe0)
[    3.032066] [<c03dddc8>] (driver_register) from [<c0f1e208>] (kgsl_3d_init+0x20/0x4c)
[    3.039877] [<c0f1e208>] (kgsl_3d_init) from [<c0100798>] (do_one_initcall+0x1b8/0x1f8)
[    3.047863] [<c0100798>] (do_one_initcall) from [<c0f00df8>] (kernel_init_freeable+0x118/0x1dc)
[    3.056545] [<c0f00df8>] (kernel_init_freeable) from [<c09770d8>] (kernel_init+0x8/0x10c)
[    3.064704] [<c09770d8>] (kernel_init) from [<c0106788>] (ret_from_fork+0x14/0x2c)
[    3.072330] ---[ end trace 8bc850b877c22f1b ]---
[    3.087308] brd: module loaded
[    3.091997] loop: module loaded
[    3.094516] zram: Created 1 device(s) ...
[    3.098581] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
[    3.104391] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[    3.111025] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
[    3.118314] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
[    3.127735] QSEECOM: qseecom_probe: secure app region addr=0x87a00000 size=0x200000
[    3.135564] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
[    3.144681] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    3.150449] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    3.157215] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    3.164053] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    3.171017] i2c-core: driver [tasha-i2c-core] using legacy suspend method
[    3.177682] i2c-core: driver [tasha-i2c-core] using legacy resume method
[    3.184996] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[    3.194161] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
[    3.200083] qce 720000.qcedev: CE device = 0x0
[    3.200083] IO base, CE = 0xe0680000
[    3.200083] Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
[    3.200083] IO base BAM = 0x00000000
[    3.200083] BAM IRQ 70
[    3.200083] Engines Availability = 0x2010853
[    3.223702] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x00704000
[    3.231503] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x00704000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x00704000
[    3.245999] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x00704000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x00704000
[    3.260496] sps:BAM 0x00704000 is registered.[    3.265155] sps:BAM 0x00704000 (va:0xe06c0000) enabled: ver:0x25, number of pipes:8
[    3.272947] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 70
[    3.282557] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[    3.291378] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
[    3.297734] qcrypto 720000.qcrypto: CE device = 0x0
[    3.297734] IO base, CE = 0xe07c0000
[    3.297734] Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
[    3.297734] IO base BAM = 0x00000000
[    3.297734] BAM IRQ 70
[    3.297734] Engines Availability = 0x2010853
[    3.322486] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 70
[    3.331090] qcrypto 720000.qcrypto: qcrypto-ecb-aes
[    3.335009] qcrypto 720000.qcrypto: qcrypto-cbc-aes
[    3.339865] qcrypto 720000.qcrypto: qcrypto-ctr-aes
[    3.344760] qcrypto 720000.qcrypto: qcrypto-ecb-des
[    3.349588] qcrypto 720000.qcrypto: qcrypto-cbc-des
[    3.354479] qcrypto 720000.qcrypto: qcrypto-ecb-3des
[    3.359397] qcrypto 720000.qcrypto: qcrypto-cbc-3des
[    3.364366] qcrypto 720000.qcrypto: qcrypto-xts-aes
[    3.369205] qcrypto 720000.qcrypto: qcrypto-sha1
[    3.373829] qcrypto 720000.qcrypto: qcrypto-sha256
[    3.378584] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[    3.384765] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[    3.390924] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[    3.397155] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[    3.403516] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[    3.409827] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[    3.416272] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
[    3.421309] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
[    3.426495] qcrypto 720000.qcrypto: qcrypto-aes-ccm
[    3.431374] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
[    3.437222] SCSI Media Changer driver v0.25 
[    3.441724] msm_nand_probe: disabling nand as boot device (0) is not NAND
[    3.453255] sps: BAM device 0x07884000 is not registered yet.
[    3.457965] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x07884000
[    3.465799] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x07884000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x07884000
[    3.480269] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x07884000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x07884000
[    3.494766] sps:BAM 0x07884000 is registered.[    3.499836] sps:BAM 0x07884000 (va:0xe0c40000) enabled: ver:0x18, number of pipes:16
[    3.513380] tun: Universal TUN/TAP device driver, 1.6
[    3.517390] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.524601] wcnss_wlan probed in built-in mode
[    3.529482] hyp_assign_table: Failed to assign memory protection, ret = -19
[    3.530662] msm_sharedmem: sharedmem_register_qmi: qmi init successful
[    3.541954] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x87c00000 size=917504 err=-19
[    3.552360] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[    3.559794] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
[    3.567537] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
[    3.575538] msm_otg 78d9000.usb: msm_otg probe
[    3.582918] msm_otg 78d9000.usb: OTG regs = e0198000
[    3.589010] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.594589] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    3.600817] usbcore: registered new interface driver cdc_acm
[    3.605692] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.613791] usbcore: registered new interface driver usb-storage
[    3.619704] usbcore: registered new interface driver ums-alauda
[    3.625648] usbcore: registered new interface driver ums-cypress
[    3.631632] usbcore: registered new interface driver ums-datafab
[    3.637585] usbcore: registered new interface driver ums-freecom
[    3.643608] usbcore: registered new interface driver ums-isd200
[    3.649485] usbcore: registered new interface driver ums-jumpshot
[    3.655572] usbcore: registered new interface driver ums-karma
[    3.661387] usbcore: registered new interface driver ums-onetouch
[    3.667451] usbcore: registered new interface driver ums-sddr09
[    3.673366] usbcore: registered new interface driver ums-sddr55
[    3.679249] usbcore: registered new interface driver ums-usbat
[    3.685090] usbcore: registered new interface driver usb_ehset_test
[    3.692140] gbridge_init: gbridge_init successs.
[    3.697261] qcom,qpnp-rtc qpnp-rtc-4: rtc core: registered qpnp_rtc as rtc0
[    3.703239] msm_otg 78d9000.usb: phy_reset: success
[    3.703381] i2c /dev entries driver
[    3.714776] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000
[    3.725168] msm_camera_get_dt_vreg_data:1118 number of entries is 0 or not present in dts
[    3.733406] msm_camera_get_dt_vreg_data:1118 number of entries is 0 or not present in dts
[    3.741105] msm_camera_get_dt_vreg_data:1118 number of entries is 0 or not present in dts
[    3.751782] ------------[ cut here ]------------
[    3.755367] WARNING: CPU: 2 PID: 1 at /mnt/devhomes/build/work/83941694d19f355d/kernel/msm-3.18/include/linux/of.h:770 msm_camera_get_dt_vreg_data+0x194/0x5a4()
[    3.769739] Modules linked in:
[    3.772723] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G        W      3.18.66-perf #1
[    3.780288] [<c010d5d8>] (unwind_backtrace) from [<c010a484>] (show_stack+0x10/0x14)
[    3.788006] [<c010a484>] (show_stack) from [<c097ae2c>] (dump_stack+0x80/0xa0)
[    3.795209] [<c097ae2c>] (dump_stack) from [<c011add8>] (warn_slowpath_common+0x64/0x88)
[    3.803281] [<c011add8>] (warn_slowpath_common) from [<c011ae8c>] (warn_slowpath_null+0x18/0x20)
[    3.812049] [<c011ae8c>] (warn_slowpath_null) from [<c05a47f4>] (msm_camera_get_dt_vreg_data+0x194/0x5a4)
[    3.821599] [<c05a47f4>] (msm_camera_get_dt_vreg_data) from [<c05b5b20>] (msm_sensor_driver_parse+0x140/0x534)
[    3.831580] [<c05b5b20>] (msm_sensor_driver_parse) from [<c05b5f9c>] (msm_sensor_driver_i2c_probe+0x88/0x11c)
[    3.841473] [<c05b5f9c>] (msm_sensor_driver_i2c_probe) from [<c0543310>] (i2c_device_probe+0xc8/0x100)
[    3.850765] [<c0543310>] (i2c_device_probe) from [<c03dd348>] (driver_probe_device+0x134/0x358)
[    3.859445] [<c03dd348>] (driver_probe_device) from [<c03dd5d4>] (__driver_attach+0x68/0x8c)
[    3.867864] [<c03dd5d4>] (__driver_attach) from [<c03db888>] (bus_for_each_dev+0x6c/0x90)
[    3.876024] [<c03db888>] (bus_for_each_dev) from [<c03dc9a4>] (bus_add_driver+0x110/0x238)
[    3.884270] [<c03dc9a4>] (bus_add_driver) from [<c03dddc8>] (driver_register+0x9c/0xe0)
[    3.892258] [<c03dddc8>] (driver_register) from [<c05417c4>] (i2c_register_driver+0x40/0xd8)
[    3.900676] [<c05417c4>] (i2c_register_driver) from [<c0f2313c>] (msm_sensor_driver_init+0x54/0x90)
[    3.909703] [<c0f2313c>] (msm_sensor_driver_init) from [<c0100798>] (do_one_initcall+0x1b8/0x1f8)
[    3.918559] [<c0100798>] (do_one_initcall) from [<c0f00df8>] (kernel_init_freeable+0x118/0x1dc)
[    3.927240] [<c0f00df8>] (kernel_init_freeable) from [<c09770d8>] (kernel_init+0x8/0x10c)
[    3.935400] [<c09770d8>] (kernel_init) from [<c0106788>] (ret_from_fork+0x14/0x2c)
[    3.942944] ---[ end trace 8bc850b877c22f1c ]---
[    3.950238] Failed to disable secure wdog debug: -4
[    3.956555] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[    3.964290] sdhci: Secure Digital Host Controller Interface driver
[    3.970132] sdhci: Copyright(c) Pierre Ossman
[    3.974459] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.980879] sdhci_msm 7824900.sdhci: sdhci_msm_probe: ICE device is not enabled
[    3.987714] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled
[    4.000172] sdhci_msm 7824900.sdhci: No vmmc regulator found
[    4.004791] sdhci_msm 7824900.sdhci: No vqmmc regulator found
[    4.010887] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in legacy mode
[    4.048965] tz_log 8600720.tz-log: Hyp log service is not supported
[    4.049365] usbcore: registered new interface driver usbhid
[    4.049367] usbhid: USB HID core driver
[    4.050098] ashmem: initialized
[    4.070156] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
[    4.076308] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[    4.085374] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
[    4.092224] mmc0: Out-of-interrupt timeout is 40[ms]
[    4.097109] mmc0: BKOPS_EN equals 0x0
[    4.100772] mmc0: eMMC FW version: 0x02
[    4.104597] probe: Version mismatch expected 0x20000 got 0x0
[    4.104598] mmc0: cache barrier support 1 flush policy 1
[    4.114496] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
[    4.120490] u32 classifier
[    4.120492]     Actions configured
[    4.120531] Netfilter messages via NETLINK v0.30.
[    4.120593] nf_conntrack version 0.5.0 (6831 buckets, 27324 max)
[    4.121022] ctnetlink v0.93: registering with nfnetlink.
[    4.121858] xt_time: kernel timezone is -0000
[    4.122216] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.122382] arp_tables: (C) 2002 David S. Miller
[    4.122435] TCP: cubic registered
[    4.122440] Initializing XFRM netlink socket
[    4.122816] NET: Registered protocol family 10
[    4.123827] mip6: Mobile IPv6
[    4.123854] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    4.124015] sit: IPv6 over IPv4 tunneling driver
[    4.124542] NET: Registered protocol family 17
[    4.124625] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    4.124649] Bridge firewalling registered
[    4.124656] Ebtables v2.0 registered
[    4.124859] Bluetooth: ddc45eb0
[    4.124877] Bluetooth: ddc45ea8
[    4.124890] Bluetooth: ddc45ec0
[    4.124892] Bluetooth: ddc45ea0
[    4.124900] Bluetooth: ddc45ea0
[    4.124906] Bluetooth: ddc45e98
[    4.124914] Bluetooth: ddc45ed8
[    4.124940] Bluetooth: ddc45ed8
[    4.124941] l2tp_core: L2TP core driver, V2.0
[    4.124948] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    4.124971] l2tp_netlink: L2TP netlink interface
[    4.124999] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    4.125026] l2tp_debugfs: L2TP debugfs support
[    4.125033] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    4.125663] NET: Registered protocol family 27
[    4.127274] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [local_IPCRTR]
[    4.128579] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
[    4.130023] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id.
[    4.130524] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
[    4.136096] Registering SWP/SWPB emulation handler
[    4.136675] registered taskstats version 1
[    4.144612] bam_dmux_init : unable to create IPC Logging Context
[    4.144643] uart_cts_gpio is not available
[    4.144650] uart_rfr_gpio is not available
[    4.144783] msm_serial_hs 78b0000.uart: msm_hs_probe: error creating logging context
[    4.151756] msm_serial_hs 78b0000.uart: msm_hs_probe: error creating tx logging context
[    4.151761] msm_serial_hs 78b0000.uart: msm_hs_probe: error creating rx logging context
[    4.151766] msm_serial_hs 78b0000.uart: msm_hs_probe: error creating usr logging context
[    4.244757] 78b0000.uart: ttyHS0 at MMIO 0x78b0000 (irq = 33, base_baud = 460800) is a MSM HS UART
[    4.365113] msm_serial_hs module loaded
[    4.369279] hyp_assign_table: Failed to assign memory protection, ret = -19
[    4.375329] fastrpc: probe of soc:qcom,mdsprpc-mem failed with error -1
[    4.383978] file system registered
[    4.386400] mbim_init: initialize 1 instances
[    4.390837] mbim_init: Initialized 1 ports
[    4.394228] mmc0: new HS200 MMC card at address 0001
[    4.394875] mmcblk0: mmc0:0001 EE4ED4 3.56 GiB 
[    4.394976] mmcblk0rpmb: mmc0:0001 EE4ED4 partition 3 512 KiB
[    4.410771]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32
[    4.414018] rndis_qc_init: initialize rndis QC instance
[    4.414332] Number of LUNs=8
[    4.414337] Mass Storage Function, version: 2009/09/11
[    4.414342] LUN: removable file: (no medium)
[    4.414353] Number of LUNs=1
[    4.414408] LUN: removable file: (no medium)
[    4.414410] Number of LUNs=1
[    4.414715] android_usb gadget: android_usb ready
[    4.414723] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
[    4.414736] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received
[    4.422549] qcom,qpnp-rtc qpnp-rtc-4: setting system clock to 1970-01-01 00:00:06 UTC (6)
[    4.423884] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
[    4.423907] calculate_residency: residency < 0 for LPM
[    4.423910] parse_cpu_levels: idx 1 420
[    4.423912] calculate_residency: residency < 0 for LPM
[    4.423914] parse_cpu_levels: idx 2 500
[    4.423917] parse_cpu_levels: idx 2 1373
[    4.423923] calculate_residency: residency < 0 for LPM
[    4.423925] calculate_residency: residency < 0 for LPM
[    4.521077] qcom,cc-debug-8909 1874000.qcom,cc-debug: Registered Debug Mux successfully
[    4.530395] msm8952-asoc-wcd 7702000.sound: default codec configured
[    4.537928] msm8952-asoc-wcd 7702000.sound: ASoC: CODEC DAI cajon_vifeedback not registered
[    4.545311] msm8952-asoc-wcd 7702000.sound: snd_soc_register_card failed (-517)
[    4.552945] mem_acc_corner: disabling
[    4.556224] clock_late_init: Removing enables held for handed-off clocks
[    4.565064] ALSA device list:
[    4.567008]   No soundcards�[    4.571146] Freeing unused kernel memory: 308K
[    4.622804] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
[    4.628477] msm_hs_resource_vote:78b0000.uart runtime callback not invoked ret:0 st:1
[    4.628478] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received
[    6.647335] irq 72, desc: ddec1300, depth: 0, count: 0, unhandled: 0
[    6.652645] ->handle_irq():  c030550c, msm_gpio_irq_handler+0x0/0x118
[    6.659068] ->irq_data.chip(): c101f498, gic_chip+0x0/0x74
[    6.664538] ->action():   (null)
[    6.667750]    IRQ_NOPROBE set
[    6.670786]  IRQ_NOREQUEST set
[    6.673826]   IRQ_NOTHREAD set
[    6.676901] msm_serial_hs_rx_work(): RX Buffer Overrun Detected

@rampost.lcd_check14627

@rampost.spine.open_serialopening serial port /dev/ttyHS04627

@rampost.spine.configure_serial_portconfiguring port /dev/ttyHS0 (fd=9)4630

@rampost.spine.select_timeoutNo serial data for 1 sec5641

@rampost.spine.select_timeoutNo serial data for 2 sec6642

@rampost.dfu.request_version...6642

@rampost.dfu.open_fileopening "syscon.dfu"6700

@rampost.dfu.installed_version57733030303030303033343561316300Ws0000000345a1c*6700

@rampost[    6.762131] EXT4-fs (dm-0): mounted filesystem without journal. Opts: noload
.dfu.desired_version  57733030303030303033343561316300Ws0000000345a1c*6700

@rampost.battery_level3.7606700

@rampost.battery_temperature366700

@rampost.battery_flags000000006700

@rampost.rampost.exit06720
Setting up DM Verity device: system none ro,0 1179648 verity 1 179:22 179:22 4096 4096 147456 147457 sha256 757fb7211ca70c0cd584f51c9ff002cb13b67a29c7c8f1121f4124f371d1d7e7 ab537db38f41ee4789f0ceee247dabe1c3093cd6875e35064a4c5f6b46785f82
Kernel not configured for semaphores (System V IPC). Not using udev synchronisation code.
[    7.055796] systemd[1]: Failed to insert module 'autofs4': No such file or directory
[    7.074974] random: systemd urandom read with 73 bits of entropy available
[    7.088499] systemd[1]: systemd 225 running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    7.105937] systemd[1]: Detected architecture arm.
Welcome to msm-user 201904051705!

[    7.133147] systemd[1]: Set hostname to <Vector>.
[    7.144369] systemd[1]: Initializing machine ID from random generator.
[    7.150139] systemd[1]: Installed transient /etc/machine-id file.
[    7.370292] systemd[1]: [/lib/systemd/system/mdsprpcd.service:11] Failed to parse service restart specifier, ignoring: yes
[    7.431542] systemd[1]: serial-getty@ttyHSL0.service: Cannot add dependency job, ignoring: Unit serial-getty@ttyHSL0.service failed to load: No such file or directory.
[    7.449098] systemd[1]: Started Dispatch Password Requests to Console Directory����&�z-� ] Started Dispatch Password Requests to Console Directory Watch.
[    7.480380] systemd[1]: Started Forward Password Requests to Wall Directoߵ�5�j� OK  ] Started Forward Password Requests to Wall Directory Watch.
[    7.500199] systemd[1]: Reached target Soo��5�j� OK  ] Reached target Sound Card.
[    7.520425] systemd[1]: Created slice Ro����&�z-� ] Created slice Root Slice.
[    7.540329] systemd[1]: Listening on /dev/initctl Compatibility Nao��5�j� OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    7.560287] systemd[1]: Listening on udev Controo��5�j� OK  ] Listening on udev Control Socket.
[    7.580416] systemd[1]: Created slice Systo��5�j� OK  ] Created slice System Slice.
[    7.600505] systemd[1]: Created slice system-get޵�5�j� OK  ] Created slice system-getty.slice.
[    7.620322] systemd[1]: Listening on Journal Socket (/o��5�j� OK  ] Listening on Journal Socket (/dev/log).
[    7.657960] systemd[1]: Listening on Journal�[  OK  ] Listening on Journal Socket.
[    7.681789] systemd[1]: Starting Journal Ser         Starting Journal Service...
[    7.702273] systemd[1]: Starting Setup Virtual Co��х�ѥ���Setup Virtual Console...
[    7.722392] systemd[1]: Started irsc-util �[  OK  ] Started irsc-util Service.
[    7.742036] systemd[1]: Started Find-Partitions S�[  OK  ] [    7.746826] systemd-journald[272]: [/etc/systemd/journald.conf:26] Unknown lvalue 'RuntimeMaxFiles' in section 'Journal'
Started Find-Partitions Service.
[    7.790117] systemd[1]: Starting Apply Kernel Var�         Starting Apply Kernel Variables...
[    7.812189] systemd[1]: Mounting Configuration File Sys�j�չѥ���Configuration File System...
[    7.842162] systemd[1]: Started Victor Boot A�[  OK  ] Started Victor Boot Animator.
[    7.862564] systemd[1]: Starting Create list of required static device nodes for the current ke�         Starting Create list of required st... nodes for the current kernel...
[    7.890510] systemd[1]: Listening on udev Kernel �[  OK  ] Listening on udev Kernel Socket.
[    7.912559] systemd[1]: Starting Remount Root and Kernel File Sy�         Starting Remount Root and Kernel File Systems...
[    7.932031] EXT4-fs (dm-0): re-mounted. Opts: (null)
[    7.940289] systemd[1]: Reached tar�[  OK  ] Reached target Swap.
[    7.963885] systemd[1]: Reached target Remote File�[  OK  ] Reached target Remote File Systems.
[    7.993081] systemd[1]: Starting Fake Hardware Clock Early�         Starting Fake Hardware Clock Early Boot...
[    8.021792] systemd[1]: Mounting /sys/fs/p�         Mounting /sys/fs/pstore...
[    8.040994] systemd[1]: Created slice system-syslog\x2dn[  OK  ] Created slice system-syslog\x2dng.slice.
[    8.060312] systemd[1]: Reached targ�[  OK  ] Reached target Paths.
[    8.081005] systemd[1]: Created slice User and Sessi�[  OK  ] Created slice User and Session Slice.
[    8.100492] systemd[1]: Reached target�[  OK  ] Reached target Slices.
[    8.124278] systemd[1]: Mounted Configuration File Sys�[  OK  ] Mounted Configuration File System.
[    8.140384] systemd[1]: Mounted /sys/fs����&�z-� ] Mounted /sys/fs/pstore.
[    8.160900] systemd[1]: Started Journal�[  OK  ] Started Journal Service.
[  OK  ] Started Setup Virtual Console.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Fake Hardware Clock Early Boot.
         Starting Update UTMP about System Boot/Shutdown...
         Starting udev Coldplug all Devices...
         Starting Create Static Device Nodes in /dev...
         Starting Packet Filtering Framework...
         Starting Packet Filtering Framework...
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Create Static Device Nodes in /dev.
[    8.548420] systemd-journald[272]: Received request to flush runtime journal from PID 1
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /var/volatile...
[  OK  ] Mounted /var/volatile.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Packet Filtering Framework.
[  OK  ] Started Packet Filtering Framework.
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started udev Kernel Device Manager.
         Starting Bind mount volatile /var/lib...
[  OK  ] Started Bind mount volatile /var/lib.
         Starting Load/Save Random Seed...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started udev Coldplug all Devices.
[   10.197077] random: nonblocking pool is initialized
[  OK  ] Found device /dev/disk/by-partlabel/modem.
         Mounting /firmware...
[  OK  ] Mounted /firmware.
[  OK  ] Found device /dev/disk/by-partlabel/oem.
         Mounting /factory...
[   10.936572] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: (null)
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Firmwarelinks Service.
[  OK  ] Mounted /factory.
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Found device /dev/ion.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started Save hwclock every 15 minutes.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
         Starting Restore Sound Card State...
[  OK  ] Started Daily rotation of log files.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on Fault Code socket.
[  OK  ] Listening on Fake Hardware Clock socket.
[  OK  ] Listening on Anki Crash Log Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started WCNSS platform.
[  OK  ] Started set_core_pattern Service.
[   11.415950] wcnss_wlan triggered by userspace
[   11.421838] wcnss_pm_qos_add_request: add request
[   11.425537] wcnss_pm_qos_update_request: update request 100
[   11.431232] wcnss_trigger_config:  adc get failed
[   11.435793] wcnss_trigger_config: couldn't get snoc_wcnss
[   11.441160] wcnss_notif_cb: wcnss notification event: 2
[   11.447215] subsys-pil-tz a21b000.qcom,pronto: wcnss: Allocating region at 0x00000000 size 0x700000
[   11.455447] subsys-pil-tz a21b000.qcom,pronto: wcnss: loading from 0x8a400000 to 0x8aa38000
[   11.463757] wcnss_notif_cb: wcnss notification event: 6
[  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
[   11.473590] wcnss: IRIS Reg: 91100004
[  OK  ] Started bsp_paths Service.
[  OK  ] Started D-Bus System Message Bus.
         Starting Init-audio Service...
[   11.688685] subsys-pil-tz a21b000.qcom,pronto: wcnss: Brought out of reset
[   11.699090] adsp-loader soc:qcom,msm-adsp-loader: adsp_loader_do: scheduling work to load ADSP fw
[   11.707654] pil-q6v5-mss 4080000.qcom,mss: modem: Allocating region at 0x00000000 size 0x1f00000
[   11.715763] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x88000000 to 0x89f00000
[   11.732473] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
[   11.740116] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x9e800000 to 0x9e900000 size 100000
[  OK  ] Started Anki Camera Service.
         Starting Login Service...
         Starting reboot-daemon service...
[  OK  ] Started set_core_pattern Service.
[  OK  ] Started Service manager Service.
[   11.858771] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
[  OK  ] Started chgrp-diag Service.
[  OK  ] Started mdsprpc Service.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
         Starting System Logger Daemon "default" instance...
[  OK  ] Started qti service.
[  OK  ] Started Thermal Engine Service.
[  OK  ] Started QTI Post Boot Service.
[   12.042364] subsys-pil-tz a21b000.qcom,pronto: wcnss: Power/Clock ready interrupt received
[   12.049605] wcnss_notif_cb: wcnss notification event: 7
[   12.060952] subsys-pil-tz a21b000.qcom,pronto: Subsystem error monitoring/handling services are up
[   12.068982] wcnss_notif_cb: wcnss notification event: 3
[   12.074332] wcnss_pm_qos_update_request: update request -1
[   12.075451] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, c1195cbc
[   12.077605] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [wcnss_IPCRTR]
[   12.077605] msm8952-asoc-wcd 7702000.sound: default codec configured
[   12.080121] msm8952-asoc-wcd 7702000.sound: ASoC: CODEC DAI cajon_vifeedback not registered
[   12.080162] msm8952-asoc-wcd 7702000.sound: snd_soc_register_card failed (-517)
[   12.118911] wcnss_pm_qos_remove_request: remove request
         Starting logd Service...
[   12.169636] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of[  OK  ] Started Restore Sound Card State.
[  OK  ] Started Init-audio Service.
[  OK  ] Started reboot-daemon service.
[   12.219394] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
[   12.221997] msm8952-asoc-wcd 7702000.sound: default codec configured
[   12.225547] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [modem_IPCRTR]
[   12.225547] wcd-spmi-core msm8x16_wcd_codec-8: Error: regulator not found:cdc-vdd-spkdrv
[   12.233959] 'opened /dev/mdsprpc-smd c 235 2'
[   12.241060] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL5 --> MultiMedia5 --> TERT_MI2S_RX Audio Mixer
[   12.241067] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL5 -> MultiMedia5 -> TERT_MI2S_RX Audio Mixer
[   12.241117] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL8 --> MultiMedia8 --> TERT_MI2S_RX Audio Mixer
[   12.241122] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL8 -> MultiMedia8 -> TERT_MI2S_RX Audio Mixer
[   12.241711] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for INT_FM_TX --> INTERNAL_FM_TX --> SEC_MI2S_RX Port Mixer
[   12.241717] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route INT_FM_TX -> INTERNAL_FM_TX -> SEC_MI2S_RX Port Mixer
[   12.259953] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL3 MUX
[   12.259960] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL3 MUX -> direct -> MM_UL3
[   12.268345] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SEC_MI2S_TX --> SEC_MI2S_TX --> SLIMBUS_0_RX Port Mixer
[   12.268352] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> SLIMBUS_0_RX Port Mixer
[   12.269478] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
[   12.269484] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
[   12.271568] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX
[   12.271574] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX
[   12.306217] msm_thermal:set_enabled enabled = 0
[   12.403200] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to create SEC_MI2S_RX Port Mixer debugfs file
[   12.428518] M-Notify: General: 7
[   12.428982] msm-pcm-routing soc:qcom,W��� ASoC: mux SLIM_0_RX AANC MUX has no paths
[   12.434506] wcd-spmi-core msm8x16_wcd_codec-8: ASoC: mux RX3 MIX1 INP3 has no paths
[   12.434893] wcd-spmi-core msm8x16_wcd_codec-8: ASoC: mux RX2 MIX1 INP3 has no paths
[  OK  ] Found device /dev/qseecom.
[   12.481799] logd.auditd: start
[   12.483866] logd.klogd: 12483805723
[   12.542629] USB QCMAP NL IOCTL Snd GETNEIGH Succ
[  OK  ] Started Login Service.
         Starting mount-data...
[   12.637258] wlan: loading driver v3.0.11.85
         Starting Anki ALSA init...
[   12.689010] anki-audio-init: START
[   12.911156] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
[   12.926537] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded
[  OK  ] Started System Logger Daemon "default" instance.
[   13.215324] wcnss_wlan_ctrl_probe: SMD ctrl channel up
[   13.219905] wcnss: version 01050102
[   13.223297] wcnss: schedule dnld work for pronto
[   13.227588] wcnss: build version�[  OK  ] Started logd Service.
[   15.525875] EXT4-fs (dm-1): recovery complete
[   15.531499] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[  OK  ] Started mount-data.
         Starting usb Service...
[  OK  ] Started BT Property Service.
[   15.780259] wcnss: NV download
[   15.789107] wcnss: NV bin size: 31719, total_fragments: 11
[   15.794441] wcnss: no space available for smd frame
         Starting Connection service...
[   15.820270] wcnss: no space available for smd frame
         Starting debuggerd Service...
[   15.850346] wcnss: no space available for smd frame
         Starting Setup /etc/localtime link...
[   15.880141] wcnss: no space available for s�[  OK  ] Started leprop Service.
         Starting Anki Post Boot Service...
[  OK  ] Started persist-prop service.
[   15.944089] unregister_client_adhoc: Null cl handle passed unregister
[   15.9�ster_client_adhoc: Null cl handle passed unregister
         Starting Fake Hardware Clock...[   15.956830] rpm-smd-debug: rsc_ops_write(): RPM message sent succesfully

[  OK  ] Started debuggerd Service.
[  OK  ] Started Setup /etc/localtime link.
[   16.093621] wcnss: not setting up vbatt
[   16.130692] Switching to composition number 0x9091
[  OK  ] Started usb Service.
[  OK  ] Started Remote Storage Service.
[  OK  ] Started qti system daemon Service.
[   16.298350] rmt_storage:INFO:main: Done with init now waiting for messages!
[   16.305055] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fs1!
[   16.318154] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fs2!
[  OK  ] Started Connection service.
[   16.335911] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fsg!
[   16.347285] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fsc!
[   16.359160] rmt_storage:INFO:rmt_storage_alloc_buff_cb: Received req_size: 0! avail: 917504
[   16.367264] enable_store: android_usb: already disabled
[   16.367787] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /boot/modem_fs1
[   16.368140] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=512, size=512]for /boot/modem_fs1!
[   16.404114] rmt_storage:INFO:rmt_storage_client_thread: Done Read (bytes = 512) for /boot/modem_fs1!
[   16.414112] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /boot/modem_fs2
[   16.423559] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=512, size=512]for /boot/modem_fs[  OK  ] Started Fake Hardware Clock.
[   16.435042] rmt_storage:INFO:rmt_storage_client_thread: Done Read (bytes = 512) for /boot/modem_fs2!
[   16.448106] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /boot/modem_fs2
[   16.457380] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=1024, size=916480]for /boot/modem_fs2!
[   16.524717] rmt_storage:INFO:rmt_storage_client_thread: Done Read (bytes = 916480) for /boot/modem_fs2!
         Starting WPA supplicant...
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Check for an OS update every hour.
[   16.594570] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, c1195c0c
[   16.609655] apr_tal:Modem Is Up
         Starting Save hwclock by timer...
[   16.634340] hyp_assign_table: Failed to assign memory protection, ret = -19
[  OK  ] Started Reboot the robot every day between 1AM and 5AM.
[   16.653445] memshare: hyp_assign_phys failed size=2097152 err=-19
[  OK  ] Reached target Timers.
         Starting NTP client/server...
         Starting Wait for network to be configured by ConnMan...
[   16.731658] pstore: Registered ramoops as persistent store backend
[   16.736847] ramoops: attached 0x100000@0x9ff00000, ecc: 0/0
[   16.830204] VicOS Version: 1.6.0.3331
[  OK  ] Started Anki Post Boot Service.
[  OK  ] Started NTP client/server.
[  OK  ] Started WPA supplicant.
[  OK  ] Started Save hwclock by timer.
[   17.076331] input: msm8909-pm8916-snd-card Headset Jack as /devices/soc/7702000.sound/sound/card0/input1
[   17.085903] input: msm8909-pm8916-snd-card Button Jack as /devices/soc/7702000.sound/sound/card0/inp[  OK  ] Reached target Network.
         Starting Hostname Service...
[  OK  ] Started MM Camera Daemon Service.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started Anki Bluetooth Daemon.
         Starting Marks boot as successful...
[  OK  ] Started Hostname Service.
[  OK  ] Started Marks boot as successful.
[  OK  ] Reached target Multi-User System.
         Starting Update UTMP about System Runlevel Changes...
[   17.735577] msm_pm_qos_add_request: add reque�[  OK  ] Started Anki ALSA init.

[   17.746437] Generating power_down_setting[   17.793610] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0xe (ok)
[  OK  ] [   17.811055] wcnss_get_serial_number: Device serial number: 401952986
Started Update UTMP about System Runlevel Changes.
[   17.866687] ov8856_f8v05a probe succeeded
[   17.866689] msm_csid_init: CSID_VERSION = 0x30010000
[   17.875453] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
         Starting Victor init service...
[   17.915280] wlan: WCNSS WLAN version 1.5.1.2
[   17.918537] wlan: WCNSS software version 00031
[   17.926087] wlan: WCNSS hardware version WCN v2.0 RadioPhy vUnknown with 19.2MHz XO
[   17.932952] DefaultCountry is 00
[   17.966551] wlan_logging_sock_activate_svc: Initalizing FEConsoleLog = 1 NumBuff = 32
[   17.970707] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.979710] wlan_logging_sock_activate_svc: Initalizing Pkt stats pkt_stats_buff = 16
[   17.988359] wlan: driver loaded
[   18.181988] cfg80211: Calling CRDA for country: US
[  OK  ] Started Victor init service.
         Starting Victor crash uploader daemon...
[   18.480564] cfg80211: Regulatory domain changed to country: US
[   18.486319] cfg80211:  DFS Master region: FCC
[   18.489864] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   18.500687] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (8.508093] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 3000 mBm), (N/A)
[  OK  [   18.517359] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
] Started Victor crash uploader daemon.
[   18.527889] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
[   18.539427] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   18.547248] cfg80211:   (5842000 KHz - 5863000 KHz @ 5000 KHz), (N/A, 3000 mBm), (N/A)
[   18.554892] cfg80211:   (5850000 KHz - 5870000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   18.562967] cfg80211:   (5860000 KHz - 5880000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   18.570889] cfg80211:   (5865000 KHz - 5885000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[   18.578591] cfg80211:   (5870000 KHz - 5890000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   18.586795] cfg80211:   (5880000 KHz - 5900000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   18.594814] cfg80211:   (5890000 KHz - 5910000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   18.602713] cfg80211:   (5895000 KHz - 5915000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[   18.610761] cfg80211:   (5900000 KHz - 5920000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   18.618525] cfg80211:   (5910000 KHz - 5930000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   18.626822] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[  OK  ] Started Victor DAS Manager.
         Starting Victor robot daemon...
[  OK  ] Started Victor robot daemon.
[   18.937306] irq 72, desc: ddec1300, depth: 0, count: 0, unhandled: 0
[   18.942648] ->handle_irq():  c030550c, msm_gpio_irq_handler+0x0/0x118
[   18.949060] ->irq_data.chip(): c101f498, gic_chip+0x0/0x74
[   18.954528] ->action():   (null)
[   18.957739]    IRQ_NOPROBE set
[   18.960777]  IRQ_NOREQUEST set
[   18.963815]   IRQ_NOTHREAD set
[   18.967096] msm_serial_hs_rx_work(): RX Buffer Overrun Detected
[   18.972819] msm_serial_hs_rx_work(): RX Buffer Overrun Detected
[   18.978696] msm_serial_hs_rx_work(): RX Buffer Overrun Detected
[   18.984594] msm_serial_hs_rx_work(): RX Buffer Overrun Detected
         Starting Victor animator daemon...
         Stopping Victor Boot Animator...
[  OK  ] Stopped Victor Boot Animator.
[  OK  ] Started Victor animator daemon.
[   19.321560] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
         Starting Victor engine daemon...
[   19.916305] ------------[ cut here ]------------
[   19.920351] WARNING: CPU: 0 PID: 1825 at /mnt/devhomes/build/work/83941694d19f355d/kernel/msm-3.18/net/core/dev.c:3430 netif_rx_internal+0x8c/0x1ac()
[   19.933790] Cloned packet from dev wlan0
[   19.937496] Modules linked in: ramoops wlan(O)
[   19.941633] CPU: 0 PID: 1825 Comm: avahi-daemon Tainted: G        W  O   3.18.66-perf #1
[   19.949746] [<c010d5d8>] (unwind_backtrace) from [<c010a484>] (show_stack+0x10/0x14)
[   19.957434] [<c010a484>] (show_stack) from [<c097ae2c>] (dump_stack+0x80/0xa0)
[   19.964639] [<c097ae2c>] (dump_stack) from [<c011add8>] (warn_slowpath_common+0x64/0x88)
[   19.972729] [<c011add8>] (warn_slowpath_common) from [<c011ae28>] (warn_slowpath_fmt+0x2c/0x3c)
[   19.981420] [<c011ae28>] (warn_slowpath_fmt) from [<c07d6758>] (netif_rx_internal+0x8c/0x1ac)
[   19.989895] [<c07d6758>] (netif_rx_internal) from [<c07d7570>] (netif_rx_ni+0x20/0x84)
[   19.997790] [<c07d7570>] (netif_rx_ni) from [<c07d768c>] (dev_loopback_xmit+0xb8/0xc4)
[   20.005692] [<c07d768c>] (dev_loopback_xmit) from [<c0845624>] (ip_mc_output+0xf0/0x23c)
[   20.013792] [<c0845624>] (ip_mc_output) from [<c08461f0>] (ip_send_skb+0x10/0x98)
[   20.021234] [<c08461f0>] (ip_send_skb) from [<c086803c>] (udp_send_skb+0x198/0x264)
[   20.028887] [<c086803c>] (udp_send_skb) from [<c08695dc>] (udp_sendmsg+0x50c/0x71c)
[   20.036509] [<c08695dc>] (udp_sendmsg) from [<c07c2f30>] (sock_sendmsg+0x88/0xa4)
[   20.043994] [<c07c2f30>] (sock_sendmsg) from [<c07c41d8>] (___sys_sendmsg.part.5+0x1b8/0x258)
[   20.052481] [<c07c41d8>] (___sys_sendmsg.part.5) from [<c07c5324>] (__sys_sendmsg+0x4c/0x70)
[   20.060903] [<c07c5324>] (__sys_sendmsg) from [<c01066c0>] (ret_fast_syscall+0x0/0x50)
[   20.069132] msm_serial_hs_rx_work(): RX Buffer Overrun Detected
[   20.075218] ---[ end trace 8bc850b877c22f1e ]---
[  OK  ] Started Wait for network to be configured by ConnMan.
[  OK  ] Started Victor engine daemon.
[  OK  ] Started Victor cloud services daemon.
[  OK  ] Started Victor Log Uploader.
         Starting Victor switchboard daemon...
[  OK  ] Reached target Network is Online.
         Starting Use update-engine to do an OTA right after we get Internet...
[  OK  ] Started Victor switchboard daemon.
         Starting Victor OS Update Engine...
         Starting Generate x509 cert for vic-gateway...
[  OK  ] Started Generate x509 cert for vic-gateway.
[  OK  ] Started Victor OS Update Engine.
[  OK  ] Started Use update-engine to do an OTA right after we get Internet.
[  OK  ] Started Victor gateway daemon.
[  OK  ] Reached target Anki Robotics System.
[   28.113928] msm_pm_qos_update_request: update request 100
[   28.138072] msm_csid_init: CSID_VERSION = 0x30010000
[   28.145339] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
[   28.152757] ------------[ cut here ]------------
[   28.156416] WARNING: CPU: 0 PID: 2200 at /mnt/devhomes/build/work/83941694d19f355d/kernel/msm-3.18/drivers/clk/msm/clock-local2.c:233 rcg_clk_enable+0x34/0x98()
[   28.170730] Attempting to prepare csi1_clk_src before setting its rate. Set the rate first!
[   28.179035] Modules linked in: ramoops wlan(O)
[   28.183469] CPU: 0 PID: 2200 Comm: mct_pipe_start Tainted: G        W  O   3.18.66-perf #1
[   28.191748] [<c010d5d8>] (unwind_backtrace) from [<c010a484>] (show_stack+0x10/0x14)
[   28.199450] [<c010a484>] (show_stack) from [<c097ae2c>] (dump_stack+0x80/0xa0)
[   28.206653] [<c097ae2c>] (dump_stack) from [<c011add8>] (warn_slowpath_common+0x64/0x88)
[   28.214729] [<c011add8>] (warn_slowpath_common) from [<c011ae28>] (warn_slowpath_fmt+0x2c/0x3c)
[   28.223406] [<c011ae28>] (warn_slowpath_fmt) from [<c06d0544>] (rcg_clk_enable+0x34/0x98)
[   28.231567] [<c06d0544>] (rcg_clk_enable) from [<c06cd63c>] (clk_enable+0xb4/0xf0)
[   28.239115] [<c06cd63c>] (clk_enable) from [<c06cd60c>] (clk_enable+0x84/0xf0)
[   28.246321] [<c06cd60c>] (clk_enable) from [<c059a3bc>] (msm_camera_clk_enable+0x110/0x25c)
[   28.254661] [<c059a3bc>] (msm_camera_clk_enable) from [<c05a7fe8>] (msm_csiphy_subdev_ioctl+0x2a8/0x1274)
[   28.264207] [<c05a7fe8>] (msm_csiphy_subdev_ioctl) from [<c0555e54>] (subdev_do_ioctl+0x834/0xb98)
[   28.273148] [<c0555e54>] (subdev_do_ioctl) from [<c054d8f8>] (video_usercopy+0x228/0x4a4)
[   28.281304] [<c054d8f8>] (video_usercopy) from [<c05490e4>] (v4l2_ioctl+0x60/0x124)
[   28.288943] [<c05490e4>] (v4l2_ioctl) from [<c01ded7c>] (do_vfs_ioctl+0x54c/0x67c)
[   28.296492] [<c01ded7c>] (do_vfs_ioctl) from [<c01deef8>] (SyS_ioctl+0x4c/0x74)
[   28.303786] [<c01deef8>] (SyS_ioctl) from [<c01066c0>] (ret_fast_syscall+0x0/0x50)
[   28.311323] ---[ end trace 8bc850b877c22f1f ]---
[   28.316341] msm_serial_hs_rx_work(): RX Buffer Overrun Detected
[   28.470008] afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 4096
[   28.477687] send_afe_cal_type cal_block not found!!
[   28.489166] q6asm_send_cal: cal_block is NULL
[   28.504267] msm_camera_request_gpio_table:757 gpio 94:CAM_STANDBY request fails
[   28.642449] msm_pm_qos_update_request: update request -1
[   28.804572] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
[   28.868419] csi2_src_clk get failed
[   47.399902] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
[   47.439482] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0
[   47.451804] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
[   47.469510] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo
[   85.784879] msm_isp_process_irq:VFE0 irq_status0 & 1 are both 0%   

Hey brimston3,
I have 2 Vectors, on one of them motherboard is dead but looks like secondary boards with battery is still working.
I was able to connect mainboard from one to another and it worked fine.
As it's impossible to find parts/repair motherboard I want to replace it with ESP32Cam and drive Vector using it.
I'm relatively new to hardware but I have big programming experience. I have connected to rx/tx/gnd that goes from head to bottom and was able to see some garbage in serial monitor.
How did you get this log? Did I think I saw some rx/tx on motherboard it self, did you use that one?

Thanks
Ihor