xmonad.hs

-- xmonad config used by Vic Fryzel
-- Author: Vic Fryzel
-- http://github.com/vicfryzel/xmonad-config
 
import System.IO
import System.Exit
import XMonad
import XMonad.Hooks.DynamicLog
import XMonad.Hooks.ManageDocks
import XMonad.Hooks.SetWMName
import XMonad.Hooks.EwmhDesktops
import XMonad.Layout.NoBorders
import XMonad.Layout.Spiral
import XMonad.Layout.Tabbed
import XMonad.Util.Run(spawnPipe)
import XMonad.Util.EZConfig(additionalKeys)
-- import XMonad.Hooks.FadeInactive
import XMonad.Actions.CopyWindow


import qualified XMonad.StackSet as W
import qualified Data.Map        as M

-- Za fulscreen
import XMonad.Hooks.ManageHelpers

-- Za Urgency
import XMonad.Hooks.UrgencyHook

-- za IM
import XMonad.Layout.IM
 
-- The preferred terminal program, which is used in a binding below and by
-- certain contrib modules.
--
myTerminal      = "urxvt"
 
-- Width of the window border in pixels.
--
myBorderWidth   = 1
 
-- modMask lets you specify which modkey you want to use. The default
-- is mod1Mask ("left alt").  You may also consider using mod3Mask
-- ("right alt"), which does not conflict with emacs keybindings. The
-- "windows key" is usually mod4Mask.
--
myModMask       = mod1Mask
 
-- The mask for the numlock key. Numlock status is "masked" from the
-- current modifier status, so the keybindings will work with numlock on or
-- off. You may need to change this on some systems.
--
-- You can find the numlock modifier by running "xmodmap" and looking for a
-- modifier with Num_Lock bound to it:
--
-- > $ xmodmap | grep Num
-- > mod2        Num_Lock (0x4d)
--
-- Set numlockMask = 0 if you don't have a numlock key, or want to treat
-- numlock status separately.
--
myNumlockMask   = mod2Mask
 
-- The default number of workspaces (virtual screens) and their names.
-- By default we use numeric strings, but any string may be used as a
-- workspace name. The number of workspaces is determined by the length
-- of this list.
--
-- A tagging example:
--
-- > workspaces = ["web", "irc", "code" ] ++ map show [4..9]
--
myWorkspaces    = ["1:code","2:web","3:msg","4:vm","5:media","6","7","8:ide","9"]
 
-- Border colors for unfocused and focused windows, respectively.
--
myNormalBorderColor  = "#7c7c7c"
myFocusedBorderColor = "#ff0000"
 
------------------------------------------------------------------------
-- Key bindings. Add, modify or remove key bindings here.
--
myKeys conf@(XConfig {XMonad.modMask = modMask}) = M.fromList $
 
    -- launch a terminal
    [ ((modMask .|. shiftMask, xK_Return), spawn $ XMonad.terminal conf)

    -- launch gmrun
    , ((modMask .|. controlMask, xK_l     ), spawn "xscreensaver-command -lock")

    -- launch dmenu
    , ((modMask,               xK_p     ), spawn "exe=`dmenu_path | ~/bin/myDmenu` && eval \"exec $exe\"")
    
    -- launch dmenu
    , ((modMask,               xK_F2     ), spawn "exe=`dmenu_path | ~/bin/myDmenu` && eval \"exec $exe\"")
 
    -- launch gmrun
    , ((modMask .|. shiftMask, xK_p     ), spawn "gmrun")
 
    -- close focused window 
    , ((modMask .|. shiftMask, xK_c     ), kill)
 
     -- Rotate through the available layout algorithms
    , ((modMask,               xK_space ), sendMessage NextLayout)
 
    --  Reset the layouts on the current workspace to default
    , ((modMask .|. shiftMask, xK_space ), setLayout $ XMonad.layoutHook conf)
 
    -- Resize viewed windows to the correct size
    , ((modMask,               xK_n     ), refresh)
 
    -- Move focus to the next window
    , ((modMask,               xK_Tab   ), windows W.focusDown)
 
    -- Move focus to the next window
    , ((modMask,               xK_j     ), windows W.focusDown)
 
    -- Move focus to the previous window
    , ((modMask,               xK_k     ), windows W.focusUp  )
 
    -- Move focus to the master window
    , ((modMask,               xK_m     ), windows W.focusMaster  )
 
    -- Swap the focused window and the master window
    , ((modMask,               xK_Return), windows W.swapMaster)
 
    -- Swap the focused window with the next window
    , ((modMask .|. shiftMask, xK_j     ), windows W.swapDown  )
 
    -- Swap the focused window with the previous window
    , ((modMask .|. shiftMask, xK_k     ), windows W.swapUp    )
 
    -- Shrink the master area
    , ((modMask,               xK_h     ), sendMessage Shrink)
 
    -- Expand the master area
    , ((modMask,               xK_l     ), sendMessage Expand)
 
    -- Push window back into tiling
    , ((modMask,               xK_t     ), withFocused $ windows . W.sink)
 
    -- Increment the number of windows in the master area
    , ((modMask              , xK_comma ), sendMessage (IncMasterN 1))
 
    -- Deincrement the number of windows in the master area
    , ((modMask              , xK_period), sendMessage (IncMasterN (-1)))
 
    -- toggle the status bar gap
    , ((modMask              , xK_b    ), sendMessage ToggleStruts)
    -- TODO, update this binding with avoidStruts , ((modMask              , xK_b     ),
 
    -- Quit xmonad
    , ((modMask .|. shiftMask, xK_q     ), io (exitWith ExitSuccess))
 
    -- Restart xmonad
    , ((modMask              , xK_q     ), restart "xmonad" True)

    -- Focus Urgent
    , ((modMask		     , xK_y    ), focusUrgent)

    -- Unfocus flash in Firefox
    , ((modMask             , xK_u   ), spawn "~/bin/click.sh")

    -- okno vedno na trenutnem
    , ((modMask	         , xK_a ), windows copyToAll)

    -- okno spet normalno
    , ((modMask .|. shiftMask, xK_s ),  killAllOtherCopies)
    ]
    ++

    --za MPC

    [   -- pavza
     ((mod4Mask          , xK_c     ), spawn "mpc toggle")

    -- tisje
    , ((mod4Mask	     , xK_Down), spawn "mpc volume -5")
    
    -- glasneje
    , ((mod4Mask	     , xK_Up), spawn "mpc volume +5")
    
    -- stop
    , ((mod4Mask	     , xK_v), spawn "mpc stop")
    
    -- naslednja
    , ((mod4Mask	     , xK_b), spawn "mpc next")
    
    -- prejsnja
    , ((mod4Mask	     , xK_z), spawn "mpc prev")
    ]
    ++
    --
    -- mod-[1..9], Switch to workspace N
    -- mod-shift-[1..9], Move client to workspace N
    --
    [((m .|. modMask, k), windows $ f i)
        | (i, k) <- zip (XMonad.workspaces conf) [xK_1 .. xK_9]
        , (f, m) <- [(W.greedyView, 0), (W.shift, shiftMask)]]
    ++
 
    --
    -- mod-{w,e,r}, Switch to physical/Xinerama screens 1, 2, or 3
    -- mod-shift-{w,e,r}, Move client to screen 1, 2, or 3
    --
    [((m .|. modMask, key), screenWorkspace sc >>= flip whenJust (windows . f))
        | (key, sc) <- zip [xK_w, xK_e, xK_r] [0..]
        , (f, m) <- [(W.view, 0), (W.shift, shiftMask)]]
 
 
------------------------------------------------------------------------
-- Mouse bindings: default actions bound to mouse events
--
myMouseBindings (XConfig {XMonad.modMask = modMask}) = M.fromList $
 
    -- mod-button1, Set the window to floating mode and move by dragging
    [ ((modMask, button1), (\w -> focus w >> mouseMoveWindow w))
 
    -- mod-button2, Raise the window to the top of the stack
    , ((modMask, button2), (\w -> focus w >> windows W.swapMaster))
 
    -- mod-button3, Set the window to floating mode and resize by dragging
    , ((modMask, button3), (\w -> focus w >> mouseResizeWindow w))
 
    -- you may also bind events to the mouse scroll wheel (button4 and button5)
    ]
 
------------------------------------------------------------------------
-- Layouts:
 
-- You can specify and transform your layouts by modifying these values.
-- If you change layout bindings be sure to use 'mod-shift-space' after
-- restarting (with 'mod-q') to reset your layout state to the new
-- defaults, as xmonad preserves your old layout settings by default.
--
-- The available layouts.  Note that each layout is separated by |||,
-- which denotes layout choice.
--
myTabConfig = defaultTheme {   activeBorderColor = "#7C7C7C"
                             , activeTextColor = "#CEFFAC"
                             , activeColor = "#000000"
                             , inactiveBorderColor = "#7C7C7C"
                             , inactiveTextColor = "#EEEEEE"

                             , inactiveColor = "#000000" }



myLayout = avoidStruts (tiled ||| Mirror tiled ||| tabbed shrinkText myTabConfig ||| Full |||  spiral (6/7))
  where
     -- default tiling algorithm partitions the screen into two panes
     tiled   = Tall nmaster delta ratio
 
     -- The default number of windows in the master pane
     nmaster = 1
 
     -- Default proportion of screen occupied by master pane
     ratio   = 1/2
 
     -- Percent of screen to increment by when resizing panes
     delta   = 3/100
 
------------------------------------------------------------------------
-- Window rules:
 
-- Execute arbitrary actions and WindowSet manipulations when managing
-- a new window. You can use this to, for example, always float a
-- particular program, or have a client always appear on a particular
-- workspace.
--
-- To find the property name associated with a program, use
-- > xprop | grep WM_CLASS
-- and click on the client you're interested in.
--
-- To match on the WM_NAME, you can use 'title' in the same way that
-- 'className' and 'resource' are used below.
--
myManageHook = composeAll
    [ className =? "MPlayer"        --> doFloat
    , className =? "Smplayer"       --> doFloat
    , className =? "Qrecipe"       --> doFloat
    , className =? "mpv"       --> doFloat
    , className =? "Psx.real"       --> doFloat
    , className =? "Gimp"           --> doFloat
    , className =? "Xvidcap"           --> doFloat
    , className =? "Galculator"     --> doFloat
    , className =? "Kruler"     --> doFloat
    , className =? "Opera-mobile-emulator"     --> doFloat
    , className =? "Main.py"     --> doFloat
    , className =? "emulator-arm"     --> doFloat
    , className =? "emulator"     --> doFloat
    , resource  =? "Komodo_find2"   --> doFloat
    , resource  =? "compose"        --> doFloat
    , title  =? "Save a Bookmark"        --> doFloat
    , title  =? "Open"        --> doFloat
    , title  =? "MOpenTK"        --> doFloat
    , className =? "Terminal"       --> doShift "1:code"
    , className =? "Gedit"          --> doShift "1:code"
    , className =? "Emacs"          --> doShift "1:code"
    , className =? "Komodo Edit"    --> doShift "1:code"
    , className =? "Toggl-desktop"    --> doShift "6"
    , className =? "TogglDesktop"    --> doShift "6"
    , className =? "Emacs"          --> doShift "1:code"
    , className =? "Chromium"  --> doShift "2:web"
    , className =? "chromium"  --> doShift "2:web"
    , className =? "Firefox"  --> doShift "2:web"
    , className =? "Namoroka"  --> doShift "2:web"
    , className =? "Opera"  --> doShift "2:web"
    , className =? "Thunderbird-bin" --> doShift "3:msg"
    , className =? "Kopete" --> doShift "3:msg"
    , className =? "Pidgin"         --> doShift "3:msg"
    , className =? "Akregator"         --> doShift "3:msg"
    , className =? "Qmpdclient"         --> doShift "5:media"
    , className =? "VirtualBox"     --> doShift "4:vm"
    , className =? "banshee-1"      --> doShift "5:media"
    , className =? "Ktorrent"       --> doShift "5:media"
    , className =? "Xchat"          --> doShift "5:media"
    , className =? "TVWindow"          --> doShift "5:media"
    , resource  =? "desktop_window" --> doIgnore
    , resource  =? "kdesktop"       --> doIgnore
    , isFullscreen --> (doF W.focusDown <+> doFullFloat)
    ,manageDocks
 ]
 
-- Whether focus follows the mouse pointer.
myFocusFollowsMouse :: Bool
myFocusFollowsMouse = False
 
 
------------------------------------------------------------------------
-- Status bars and logging
 
-- Perform an arbitrary action on each internal state change or X event.
-- See the 'DynamicLog' extension for examples.
--
-- To emulate dwm's status bar
--
-- > logHook = dynamicLogDzen
--
 
------------------------------------------------------------------------
-- Startup hook
 
-- Perform an arbitrary action each time xmonad starts or is restarted
-- with mod-q.  Used by, e.g., XMonad.Layout.PerWorkspace to initialize
-- per-workspace layout choices.
--
-- By default, do nothing.
myStartupHook = return ()
 
------------------------------------------------------------------------
-- Now run xmonad with all the defaults we set up.
 
-- Run xmonad with the settings you specify. No need to modify this.
--

myLogHook :: Handle -> X ()
myLogHook h = dynamicLogWithPP $ xmobarPP
	{	  ppOutput = hPutStrLn h
		, ppTitle = xmobarColor "#FFB6B0" "" . shorten 100
		, ppCurrent = xmobarColor "#CEFFAC" ""
		, ppSep = "   "
		, ppUrgent = xmobarColor "yellow" "red" . xmobarStrip
	}


main = do
	xmproc <- spawnPipe "/usr/bin/xmobar ~/.xmonad/xmobar"
--  	spawn "xcompmgr -CcfF -I-.015 -O-.03 -D6 -t-1 -l-3 -r4.2 -o.5"
--  	spawn "xcompmgr -fF -I-.015 -O-.03 -D6 "
-- 	spawn "xcompmgr -F -I-.015 -O-.03 -D6 "
	-- z ewmh libreoffice dela pa chromium fullscreen brez pa josm pa firefox fullscreen
-- 	xmonad $ withUrgencyHook NoUrgencyHook $defaults {
   	xmonad $ ewmh $ withUrgencyHook NoUrgencyHook $defaults {
		logHook       =  myLogHook xmproc >> setWMName "LG3D"
		, manageHook = manageDocks <+> myManageHook
		, startupHook = setWMName "LG3D"
	}
-- dodal da ni fade v Pidginu pa v fulscreen
-- fadeMostInactives :: Rational -> X ()
-- fadeMostInactives = fadeOutLogHook . fadeIf (isUnfocused <&&> noneOf qs)
--   where noneOf = fmap not . foldr1 (<||>)
--         qs = [isFullscreen, className =? "Pidgin"]
 
-- A structure containing your configuration settings, overriding
-- fields in the default config. Any you don't override, will 
-- use the defaults defined in xmonad/XMonad/Config.hs
-- 
-- No need to modify this.
--
defaults = defaultConfig {
      -- simple stuff
        terminal           = myTerminal,
        focusFollowsMouse  = myFocusFollowsMouse,
        borderWidth        = myBorderWidth,
        modMask            = myModMask,
--        numlockMask        = myNumlockMask,
        workspaces         = myWorkspaces,
        normalBorderColor  = myNormalBorderColor,
        focusedBorderColor = myFocusedBorderColor,
 
      -- key bindings
        keys               = myKeys,
        mouseBindings      = myMouseBindings,
 
      -- hooks, layouts
        layoutHook         = smartBorders $ myLayout,
        manageHook         = myManageHook,
        startupHook        = myStartupHook
    }