Skip to content

Instantly share code, notes, and snippets.

@bunder2015 bunder2015/client config Secret
Last active Jun 21, 2018

Embed
What would you like to do?
argh ssh
# $OpenBSD: ssh_config,v 1.33 2017/05/07 23:12:57 djm Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
Host *
Compression yes
# ForwardAgent no
# ForwardX11 no
# PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# IdentityFile ~/.ssh/id_ecdsa
# IdentityFile ~/.ssh/id_ed25519
# Port 22
# Protocol 2
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,umac-64@openssh.com
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
# PermitLocalCommand no
# VisualHostKey no
# ProxyCommand ssh -q -W %h:%p gateway.example.com
# RekeyLimit 1G 1h
# Send locale environment variables #367017
SendEnv LANG LC_*
# $OpenBSD: sshd_config,v 1.102 2018/02/16 02:32:40 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key
# Ciphers and keying
#RekeyLimit default none
# Logging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin prohibit-password
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
#AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication no
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
PrintMotd no
PrintLastLog no
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS no
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/lib64/misc/sftp-server
# the following are HPN related configuration options
# tcp receive buffer polling. disable in non autotuning kernels
#TcpRcvBufPoll yes
# disable hpn performance boosts
#HPNDisabled no
# buffer size for hpn to non-hpn connections
#HPNBufferSize 2048
# allow the use of the none cipher
#NoneEnabled no
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server
# Allow client to pass locale environment variables #367017
AcceptEnv LANG LC_*
Match Address 192.168.0.0/24 User chris
X11Forwarding yes
X11UseLocalhost no
chris@gazelle ~ $ ssh -vvv -a -i .ssh/id_rsa haswell
OpenSSH_7.7p1-hpn14v15-gentoo2, OpenSSL 1.0.2o 27 Mar 2018
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 20: Applying options for *
debug2: resolving "haswell" port 22
debug2: ssh_connect_direct: needpriv 0
debug1: Connecting to haswell [192.168.0.11] port 22.
debug1: Connection established.
debug1: identity file .ssh/id_rsa type 0
debug1: key_load_public: No such file or directory
debug1: identity file .ssh/id_rsa-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_7.7p1-hpn14v15-gentoo2
debug1: Remote protocol version 2.0, remote software version OpenSSH_7.7p1-hpn14v15-gentoo2
debug1: match: OpenSSH_7.7p1-hpn14v15-gentoo2 pat OpenSSH* compat 0x04000000
debug2: fd 3 setting O_NONBLOCK
debug1: Authenticating to haswell:22 as 'chris'
debug3: hostkeys_foreach: reading file "/home/chris/.ssh/known_hosts"
debug3: record_hostkey: found key type ECDSA in file /home/chris/.ssh/known_hosts:4
debug3: load_hostkeys: loaded 1 keys from haswell
debug3: order_hostkeyalgs: prefer hostkeyalgs: ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug3: send packet: type 20
debug1: SSH2_MSG_KEXINIT sent
debug3: receive packet: type 20
debug1: SSH2_MSG_KEXINIT received
debug1: AUTH STATE IS 0
debug2: local client KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellm
an-group-exchange-sha1,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1,ext-info-c
debug2: host key algorithms: ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519-cert-v01@open
ssh.com,ssh-rsa-cert-v01@openssh.com,ssh-ed25519,rsa-sha2-512,rsa-sha2-256,ssh-rsa
debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: zlib@openssh.com,zlib,none
debug2: compression stoc: zlib@openssh.com,zlib,none
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug2: peer server KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellm
an-group14-sha256,diffie-hellman-group14-sha1
debug2: host key algorithms: ssh-rsa,rsa-sha2-512,rsa-sha2-256,ecdsa-sha2-nistp256,ssh-ed25519
debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: none,zlib@openssh.com
debug2: compression stoc: none,zlib@openssh.com
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug1: kex: algorithm: curve25519-sha256
debug1: kex: host key algorithm: ecdsa-sha2-nistp256
debug1: REQUESTED ENC.NAME is 'chacha20-poly1305@openssh.com'
debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: zlib@openssh.com
debug1: REQUESTED ENC.NAME is 'chacha20-poly1305@openssh.com'
debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: zlib@openssh.com
debug3: send packet: type 30
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug3: receive packet: type 31
debug1: Server host key: ecdsa-sha2-nistp256 SHA256:4XLQjzS/smdwyoyS75HcAx35FvYw5KnjR/D5octAuqc
debug3: hostkeys_foreach: reading file "/home/chris/.ssh/known_hosts"
debug3: record_hostkey: found key type ECDSA in file /home/chris/.ssh/known_hosts:4
debug3: load_hostkeys: loaded 1 keys from haswell
debug3: hostkeys_foreach: reading file "/home/chris/.ssh/known_hosts"
debug3: record_hostkey: found key type ECDSA in file /home/chris/.ssh/known_hosts:4
debug3: load_hostkeys: loaded 1 keys from 192.168.0.11
debug1: Host 'haswell' is known and matches the ECDSA host key.
debug1: Found key in /home/chris/.ssh/known_hosts:4
debug3: send packet: type 21
debug2: set_newkeys: mode 1
debug1: rekey after 134217728 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: receive packet: type 21
debug1: SSH2_MSG_NEWKEYS received
debug2: set_newkeys: mode 0
debug1: rekey after 134217728 blocks
debug2: key: .ssh/id_rsa (0x55b64db1aef0), explicit, agent
debug3: send packet: type 5
debug3: receive packet: type 7
debug1: SSH2_MSG_EXT_INFO received
debug1: kex_input_ext_info: server-sig-algs=<ssh-ed25519,ssh-rsa,rsa-sha2-256,rsa-sha2-512,ssh-dss,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521>
debug3: receive packet: type 6
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug3: send packet: type 50
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey,keyboard-interactive
debug3: start over, passed a different list publickey,keyboard-interactive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: RSA SHA256:UX8pSPOhogrra/KmapUyh0N1gc009kkeRHsMSCTSY+o .ssh/id_rsa
debug3: send_pubkey_test
debug3: send packet: type 50
debug2: we sent a publickey packet, wait for reply
debug3: receive packet: type 60
debug1: Server accepts key: pkalg rsa-sha2-512 blen 279
debug2: input_userauth_pk_ok: fp SHA256:UX8pSPOhogrra/KmapUyh0N1gc009kkeRHsMSCTSY+o
debug3: sign_and_send_pubkey: RSA SHA256:UX8pSPOhogrra/KmapUyh0N1gc009kkeRHsMSCTSY+o
warning: agent returned different signature type ssh-rsa (expected rsa-sha2-512)
debug3: send packet: type 50
debug3: receive packet: type 52
debug1: Enabling compression at level 6.
debug1: Authentication succeeded (publickey).
Authenticated to haswell ([192.168.0.11]:22).
debug1: Final hpn_buffer_size = 2097152
debug1: HPN Disabled: 0, HPN Buffer Size: 2097152
debug1: channel 0: new [client-session]
debug1: Enabled Dynamic Window Scaling
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug3: send packet: type 90
debug1: Requesting no-more-sessions@openssh.com
debug3: send packet: type 80
debug1: Entering interactive session.
debug1: pledge: network
debug3: receive packet: type 80
debug1: client_input_global_request: rtype hostkeys-00@openssh.com want_reply 0
debug3: receive packet: type 4
debug1: Remote: /home/chris/.ssh/authorized_keys:1: key options: agent-forwarding port-forwarding pty user-rc x11-forwarding
debug3: receive packet: type 4
debug1: Remote: /home/chris/.ssh/authorized_keys:1: key options: agent-forwarding port-forwarding pty user-rc x11-forwarding
debug3: receive packet: type 91
debug2: channel_input_open_confirmation: channel 0: callback start
debug2: fd 3 setting TCP_NODELAY
debug3: ssh_packet_set_tos: set IP_TOS 0x48
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 1
debug3: send packet: type 98
debug1: Sending environment.
debug3: Ignored env LS_COLORS
debug3: Ignored env XDG_MENU_PREFIX
debug1: Sending env LANG = en_CA.utf8
debug2: channel 0: request env confirm 0
debug3: send packet: type 98
debug3: Ignored env QT_GRAPHICSSYSTEM
debug3: Ignored env LESS
debug3: Ignored env DISPLAY
debug3: Ignored env OPENGL_PROFILE
debug3: Ignored env CONFIG_PROTECT_MASK
debug3: Ignored env EDITOR
debug3: Ignored env GTK_OVERLAY_SCROLLING
debug3: Ignored env COLORTERM
debug3: Ignored env GCC_SPECS
debug3: Ignored env SSH_AUTH_SOCK
debug3: Ignored env USER
debug3: Ignored env PAGER
debug3: Ignored env PWD
debug3: Ignored env MANPAGER
debug3: Ignored env HOME
debug3: Ignored env TMUX
debug3: Ignored env GSETTINGS_BACKEND
debug3: Ignored env XDG_DATA_DIRS
debug3: Ignored env MATE_DESKTOP_SESSION_ID
debug3: Ignored env XERCESC_NLS_HOME
debug3: Ignored env QT_SCALE_FACTOR
debug3: Ignored env GTK_MODULES
debug3: Ignored env MAIL
debug3: Ignored env CONFIG_PROTECT
debug3: Ignored env VTE_VERSION
debug3: Ignored env TERM
debug3: Ignored env SHELL
debug3: Ignored env GNOME_KEYRING_CONTROL
debug3: Ignored env XDG_CURRENT_DESKTOP
debug3: Ignored env TMUX_PANE
debug3: Ignored env SHLVL
debug3: Ignored env MANPATH
debug3: Ignored env WINDOWID
debug3: Ignored env LOGNAME
debug3: Ignored env DBUS_SESSION_BUS_ADDRESS
debug3: Ignored env XSESSION
debug3: Ignored env XAUTHORITY
debug3: Ignored env QT_AUTO_SCREEN_SCALE_FACTOR
debug3: Ignored env XDG_CONFIG_DIRS
debug3: Ignored env PATH
debug3: Ignored env INFOPATH
debug3: Ignored env XDG_SESSION_COOKIE
debug3: Ignored env SESSION_MANAGER
debug3: Ignored env LESSOPEN
debug3: Ignored env _
debug2: channel 0: request shell confirm 1
debug3: send packet: type 98
debug2: channel_input_open_confirmation: channel 0: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: tcpwinsz: 359680 for connection: 3
debug2: tcpwinsz: 359680 for connection: 3
debug3: receive packet: type 99
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel 0: rcvd adjust 87380
debug3: receive packet: type 99
debug2: channel_input_status_confirm: type 99 id 0
debug2: shell request accepted on channel 0
debug2: tcpwinsz: 359680 for connection: 3
debug2: tcpwinsz: 359680 for connection: 3
chris@haswell ~ $ debug2: tcpwinsz: 359680 for connection: 3
debug2: tcpwinsz: 359680 for connection: 3
debug2: tcpwinsz: 359680 for connection: 3
debug2: tcpwinsz: 359680 for connection: 3
logout
debug2: tcpwinsz: 359680 for connection: 3
debug2: tcpwinsz: 359680 for connection: 3
debug2: tcpwinsz: 359680 for connection: 3
debug3: receive packet: type 98
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug3: receive packet: type 98
debug1: client_input_channel_req: channel 0 rtype eow@openssh.com reply 0
debug2: channel 0: rcvd eow
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug3: receive packet: type 96
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug3: receive packet: type 97
debug2: channel 0: rcvd close
debug3: channel 0: will not send data after close
debug2: tcpwinsz: 359680 for connection: 3
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug3: send packet: type 97
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
#0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cc -1)
debug3: send packet: type 1
debug3: fd 1 is not O_NONBLOCK
Connection to haswell closed.
Transferred: sent 2904, received 2812 bytes, in 1.8 seconds
Bytes per second: sent 1636.4, received 1584.5
debug1: Exit status 0
debug1: compress outgoing: raw data 464, compressed 307, factor 0.66
debug1: compress incoming: raw data 906, compressed 710, factor 0.78
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.