Skip to content

Instantly share code, notes, and snippets.

@bvibber
Created January 2, 2023 17:33
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save bvibber/2256bc84c3f0b8e21e65aac7b83e529f to your computer and use it in GitHub Desktop.
Save bvibber/2256bc84c3f0b8e21e65aac7b83e529f to your computer and use it in GitHub Desktop.
; Round top 16 bits of 32-bit fixed-point number in-place with with the 17th bit down
; Note: does not shift! The top bits remain in the top two bytes.
;
; If 0 bit: 5 + 12 = 5 cycles
; If 1 bit: 5 + 5 + 21 + 3? = 28 cycles for positive, 31 for negative
;
; Average given even distribution of data:
; 5 / 2 + 28 / 4 + 31 / 4 = 2.5 + 7 + 7.75 = 17.25 cycles
;
; Note a 16-bit copy is:
; 3 + 3 + 3 + 3 = 12 cycles
round_32_to_16:
; in: 32 bits fixed-point in arg..arg+3
; out: 16 bits fixed-point in arg+2..arg+3
lda arg + 1 ; (3 cycles) load byte including 17th-from-top bit
bpl end ; (2 cycles)
round_path:
lda arg + 3 ; (3 cycles) check sign bit
bpl add_path ; (2 cycles) determines add or subtract path
sub_path:
clc ; (2 cycles) clear carry bit for subtracting 1
lda arg + 2 ; (3 cycles) load low byte
sbc #0 ; (2 cycles) subtract
sta arg + 2 ; (3 cycles) save low byte
lda arg + 3 ; (3 cycles) load high byte
sbc #0 ; (2 cycles) subtract
sta arg + 3 ; (3 cycles) save high byte
jmp end ; (3 cycles)
add_path:
sec ; (2 cycles) set carry bit for adding 1
lda arg + 2 ; (3 cycles) load low byte
adc #0 ; (2 cycles) add
sta arg + 2 ; (3 cycles) save low byte
lda arg + 3 ; (3 cycles) load high byte
adc #0 ; (2 cycles) add
sta arg + 3 ; (3 cycles) save high byte
end:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment