Created
October 15, 2014 05:38
-
-
Save bvibber/d30496a1a31223c86875 to your computer and use it in GitHub Desktop.
adb logcat from flatfish build 20141015 boot failure
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
brion@lino:~/Downloads/20141015$ adb logcat | |
--------- beginning of /dev/log/main | |
I/DEBUG ( 1269): debuggerd: Oct 15 2014 01:17:00 | |
I/installd( 1272): installd firing up | |
E/cutils ( 1272): Failed to read /data/.layout_version: No such file or directory | |
D/installd( 1272): Upgrading /data/media for multi-user | |
D/installd( 1272): Upgrading to shared /data/media/obb | |
E/IMGSRV ( 1267): :0: SetupuKernel : EDM status value DevVAddr: 0xF4005000 pvLinAddrKM: 0x0xf105b000 | |
--------- beginning of /dev/log/system | |
I/Vold ( 1266): Vold 2.1 (the revenge) firing up | |
D/Vold ( 1266): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media) | |
D/Vold ( 1266): Volume extsd state changing -1 (Initializing) -> 0 (No-Media) | |
D/Vold ( 1266): Volume sdcard state changing 0 (No-Media) -> 2 (Pending) | |
D/Vold ( 1266): Volume sdcard state changing 2 (Pending) -> 1 (Idle-Unmounted) | |
W/Vold ( 1266): Duplicate state (1) | |
W/Vold ( 1266): Duplicate state (1) | |
W/Vold ( 1266): Duplicate state (1) | |
W/Vold ( 1266): Duplicate state (1) | |
W/Vold ( 1266): Duplicate state (1) | |
W/Vold ( 1266): Duplicate state (1) | |
I/Netd ( 1268): Netd 1.0 starting | |
W/InterfaceController( 1268): Warning (Cannot load library: load_library(linker.cpp:745): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library | |
W/Vold ( 1266): Duplicate state (1) | |
W/Vold ( 1266): Duplicate state (1) | |
W/Vold ( 1266): Duplicate state (1) | |
D/gpsd ( 1277): main() | |
D/gpsd ( 1277): argv[0] = '/system/bin/glgps' | |
D/gpsd ( 1277): argv[1] = '-c' | |
D/gpsd ( 1277): argv[2] = '/system/etc/gps/gpsconfig.xml' | |
I/mediaserver( 1271): ServiceManager: 0x40b5df20 | |
I/AudioFlinger( 1271): Using default 3000 mSec as standby time. | |
I/CameraService( 1271): CameraService started (pid=1271) | |
D/HALCameraFactory( 1271): camera hal version: 3000130327_V1.0 | |
D/HALCameraFactory( 1271): There is 2 attached cameras and 0 removable cameras | |
I/AudioPolicyManagerBase( 1271): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf | |
D/codec_audio( 1271): get ro.sw.audio.codec_plan_name =0 | |
D/codec_audio( 1271): get index =0 | |
V/codec_audio_pad( 1271): ****LINE:171,FUNC:pad_init | |
V/codec_audio_plan_record( 1271): record manager thread sleep | |
D/codec_audio( 1271): key_name:PHONE_EARPIECE | |
D/codec_audio( 1271): key_name:PHONE_HEADSET | |
D/codec_audio( 1271): key_name:PHONE_SPEAKER | |
D/codec_audio( 1271): key_name:BLUETOOTH_UP | |
D/codec_audio( 1271): key_name:FM_HEADSET | |
D/codec_audio( 1271): key_name:FM_SPEAKER | |
D/codec_audio( 1271): get_volume_config pcm_vol: 8 | |
D/bp_audio( 1271): get ro.sw.audio.bp_device_name=0 | |
D/bp_audio( 1271): bp_device_detect index=0 | |
I/AudioFlinger( 1271): loadHwModule() Loaded primary audio interface from sunxi audio HW HAL (audio) handle 1 | |
I/AudioFlinger( 1271): HAL output buffer size 1056 frames, normal mix buffer size 1056 frames | |
I/AudioMixer( 1271): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project | |
I/AudioFlinger( 1271): Using module 1 has the primary audio interface | |
I/AudioFlinger( 1271): AudioFlinger's thread 0x41897110 ready to run | |
W/AudioFlinger( 1271): Thread AudioOut_2 cannot connect to the power manager service | |
W/AudioFlinger( 1271): Thread AudioOut_2 cannot connect to the power manager service | |
I/audio_a2dp_hw( 1271): adev_open: adev_open in A2dp_hw module | |
I/AudioFlinger( 1271): loadHwModule() Loaded a2dp audio interface from A2DP Audio HW HAL (audio) handle 3 | |
I/AudioFlinger( 1271): loadHwModule() Loaded usb audio interface from USB audio HW HAL (audio) handle 4 | |
I/r_submix( 1271): adev_open(name=audio_hw_if) | |
I/r_submix( 1271): adev_init_check() | |
I/AudioFlinger( 1271): loadHwModule() Loaded r_submix audio interface from Wifi Display audio HAL (audio) handle 5 | |
I/AudioPolicyService( 1271): Loaded audio policy from LEGACY Audio Policy HAL (audio_policy) | |
D/MDnsDS ( 1268): MDnsSdListener starting to monitor | |
D/MDnsDS ( 1268): MDnsSdListener::Hander starting up | |
D/MDnsDS ( 1268): Going to poll with pollCount 1 | |
I/Gecko ( 1550): [1550] WARNING: Tried to RegisterCallback without an AtExitManager: file ../../../../B2G/gecko/ipc/chromium/src/base/at_exit.cc, line 40 | |
E/IMGSRV ( 1275): :0: ####HALHdmiMode:4 | |
E/IMGSRV ( 1275): :0: ####hwc_device_blank: disp:0 blank:0 | |
I/ ( 1275): Starting bootanimation with (1) format framebuffer | |
W/Gonk ( 1275): Could not open boot animation | |
I/GeckoConsole( 1275): Failed to load native module at path '/system/b2g/components/libxpcomsample.so': (80004005) Cannot load library: load_library(linker.cpp:745): library "/system/b2g/components/libxpcomsample.so" not found | |
I/Gecko:DumpUtils( 1275): FifoWatcher::OpenFifo unlink failed; errno=2. Continuing despite error. | |
I/AutoMounter( 1275): Unable to open volume configuration file '/system/etc/volume.cfg' - ignoring | |
I/VolumeManager( 1275): changing state from 'Uninitialized' to 'Starting' | |
I/VolumeManager( 1275): Connected to vold | |
I/VolumeManager( 1275): Volume sdcard (1): changing state from Init to Idle (1 observers) | |
I/VolumeManager( 1275): Volume extsd (2): changing state from Init to NoMedia (1 observers) | |
I/VolumeManager( 1275): changing state from 'Starting' to 'Volumes Ready' | |
I/AutoMounter( 1275): AutoMounter state changed from IDLE to UMS_CONFIGURED | |
I/AutoMounter( 1275): UpdateState: ums:A1C1E0 mtp:A1C0E0 mode:0 usb:1 tryToShare:0 state:UMS_CONFIGURED | |
I/AutoMounter( 1275): UpdateState: Volume sdcard is Idle and inserted | |
I/AutoMounter( 1275): UpdateState: Mounting sdcard | |
I/VolumeManager( 1275): Volume sdcard (1): changing state from Idle to Checking (4 observers) | |
I/Vold ( 1266): Volume::mountVol state : 1 | |
I/Vold ( 1266): Volume::mountVol: mMountpoint /mnt/sdcard | |
I/Vold ( 1266): /dev/block/vold/179:1 being considered for volume sdcard | |
D/Vold ( 1266): Volume sdcard state changing 1 (Idle-Unmounted) -> 3 (Checking) | |
I/Vold ( 1266): Exfat::check | |
I//system/bin/fsck.exfat( 1266): exfatfsck 0.9.5 | |
I//system/bin/fsck.exfat( 1266): ERROR: exFAT file system is not found. | |
I/logwrapper( 1266): /system/bin/fsck.exfat terminated by exit(1) | |
I/VolumeManager( 1275): Volume sdcard (1): changing state from Checking to Mounted @ '/mnt/sdcard' (4 observers) mountGeneration = 1, locked = 1 | |
I/AutoMounter( 1275): AutoMounter state changed from UMS_CONFIGURED to IDLE | |
I/AutoMounter( 1275): UpdateState: ums:A1C1E0 mtp:A1C0E0 mode:0 usb:1 tryToShare:0 state:IDLE | |
I/AutoMounter( 1275): UpdateState: Volume sdcard is Mounted and inserted @ /mnt/sdcard gen 1 locked 1 sharing dis | |
I/AutoMounter( 1275): UpdateState: Volume extsd is NoMedia and missing | |
E/Vold ( 1266): Filesystem check failed (unknown exit code 1) | |
W/Vold ( 1266): Skipping fs checks | |
I/Vold ( 1266): Device /dev/block/vold/179:1, target /mnt/sdcard mounted @ /mnt/secure/staging | |
D/Vold ( 1266): Moved mount /mnt/secure/staging -> /mnt/sdcard sucessfully | |
D/Vold ( 1266): Volume sdcard state changing 3 (Checking) -> 4 (Mounted) | |
I/Gecko ( 1275): 1413351932204 Marionette INFO marionette enabled via build flag and pref | |
I/GeckoConsole( 1275): While creating services from category 'profile-after-change', could not create service for entry 'MobileConnection Service', contract ID '@mozilla.org/mobileconnection/mobileconnectionservice;1' | |
I/GeckoConsole( 1275): While creating services from category 'profile-after-change', could not create service for entry 'Nfc', contract ID '@mozilla.org/nfc;1' | |
I/GeckoConsole( 1275): While creating services from category 'profile-after-change', could not create service for entry 'NfcContentHelper', contract ID '@mozilla.org/nfc/content-helper;1' | |
I/GeckoConsole( 1275): While creating services from category 'profile-after-change', service for entry 'Pico Speech Synth', contract ID '@mozilla.org/synthpico;1' does not implement nsIObserver. | |
I/Gecko ( 1275): 1413351932314 Marionette INFO marionette-server.js loaded | |
I/Gecko ( 1275): 1413351932563 Marionette INFO B2G emulator: no | |
I/Gecko ( 1275): 1413351932565 Marionette INFO Device detected is flatfish | |
I/Gecko ( 1275): 1413351932567 Marionette INFO Listening on port 2828 | |
I/Gecko ( 1275): | |
I/Gecko ( 1275): 1413351932567 Marionette INFO Marionette server ready | |
W/GeckoConsole( 1275): [JavaScript Warning: "mutating the [[Prototype]] of an object will cause your code to run very slowly; instead create the object with the correct initial [[Prototype]] value using Object.create" {file: "resource://gre/modules/Preferences.jsm" line: 381}] | |
D/EventHub( 1275): No input device configuration file found for device 'lightsensor-level'. | |
V/Sensors ( 1275): int open_sensors(const hw_module_t*, char const*, hw_device_t**) | |
V/Sensors ( 1275): sensors_poll_context_t::sensors_poll_context_t() | |
E/Sensorsmpltiger( 1275): could not open the accel irq device node | |
D/Sensorsmpltiger( 1275): MPLSensor falling back to timerirq for accel data | |
I/MPL-mlsl( 1275): inv_serial_open: /dev/mpu | |
I/Sensorsmpltiger( 1275): InvenSense MPL v4.1.2 Engineering Aug 30 2013 17:16:05 | |
I/MPL-mldl_cfg_mpu:( 1275): inv_mpu_suspend(,,,,7fff) -> 0000 | |
E/MPL-mlsl( 1275): Cannot open file "/data/cal.bin" for read | |
I/MPL-storeload( 1275): Calibration data not loaded | |
E/Sensorsmpltiger( 1275): Could not open or load MPL calibration file (0) | |
W/Sensorsmpltiger( 1275): No compass configured on this platform : mldl_cfg->slave[EXT_SLAVE_TYPE_COMPASS] = NULL | |
E/Sensorsmpltiger( 1275): Error : enable 9 axis sensor fusion function not registered | |
V/Sensorsmpltiger( 1275): MPLSensor::getFd returning 53 | |
V/Sensorsmpltiger( 1275): MPLSensor::getAccelFd returning -1 | |
V/Sensorsmpltiger( 1275): MPLSensor::getTimerFd returning 54 | |
E/Sensors ( 1275): LightSensor: enable fd = 56 , input_sysfs_path = /sys/class/input/event4/device/enable | |
E/Sensors ( 1275): LightSensor set flags = 1,mEnabled = 1 | |
D/EventHub( 1275): No input device configuration file found for device 'sw-keyboard'. | |
W/EventHub( 1275): Unable to disable kernel key repeat for /dev/input/event3: Function not implemented | |
I/EventHub( 1275): New device: id=2, fd=58, path='/dev/input/event3', name='sw-keyboard', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/sw-keyboard.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=true, usingClockIoctl=false | |
I/EventHub( 1275): New device: id=3, fd=59, path='/dev/input/event2', name='ft5x_ts', classes=0x14, configuration='/system/usr/idc/ft5x_ts.idc', keyLayout='', keyCharacterMap='', builtinKeyboard=false, usingSuspendBlockIoctl=true, usingClockIoctl=false | |
D/EventHub( 1275): No input device configuration file found for device 'headset'. | |
W/EventHub( 1275): Unable to disable kernel key repeat for /dev/input/event1: Function not implemented | |
I/EventHub( 1275): New device: id=4, fd=60, path='/dev/input/event1', name='headset', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/Generic.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=true, usingClockIoctl=false | |
E/EventHub( 1275): could not get driver version for /dev/input/mice, Not a typewriter | |
D/EventHub( 1275): No input device configuration file found for device 'axp22-supplyer'. | |
W/EventHub( 1275): Unable to disable kernel key repeat for /dev/input/event0: Function not implemented | |
I/EventHub( 1275): New device: id=5, fd=61, path='/dev/input/event0', name='axp22-supplyer', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/axp22-supplyer.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=true, usingClockIoctl=false | |
I/InputReader( 1275): Device added: id=-1, name='Virtual', sources=0x00000301 | |
I/InputReader( 1275): Device added: id=5, name='axp22-supplyer', sources=0x00000101 | |
I/InputReader( 1275): Device added: id=4, name='headset', sources=0x00000101 | |
I/InputReader( 1275): Device reconfigured: id=3, name='ft5x_ts', size 1280x800, orientation 0, mode 1, display id 0 | |
I/InputReader( 1275): Device added: id=3, name='ft5x_ts', sources=0x00001002 | |
I/InputReader( 1275): Device added: id=2, name='sw-keyboard', sources=0x00000101 | |
E/Sensors ( 1275): couldn't find 'Avago proximity sensor' input device | |
V/Sensorsmpltiger( 1275): MPLSensor::getPowerFd returning 55 | |
V/Sensors ( 1275): int poll__activate(sensors_poll_device_t*, int, int) | |
V/Sensors ( 1275): int sensors_poll_context_t::activate(int, int) | |
V/Sensorsmpltiger( 1275): enable - sensor RotationVector (handle 0) dis -> dis | |
V/Sensors ( 1275): int poll__activate(sensors_poll_device_t*, int, int) | |
V/Sensors ( 1275): int sensors_poll_context_t::activate(int, int) | |
V/Sensorsmpltiger( 1275): enable - sensor LinearAccel (handle 1) dis -> dis | |
V/Sensors ( 1275): int poll__activate(sensors_poll_device_t*, int, int) | |
V/Sensors ( 1275): int sensors_poll_context_t::activate(int, int) | |
V/Sensorsmpltiger( 1275): enable - sensor Gravity (handle 2) dis -> dis | |
V/Sensors ( 1275): int poll__activate(sensors_poll_device_t*, int, int) | |
V/Sensors ( 1275): int sensors_poll_context_t::activate(int, int) | |
V/Sensorsmpltiger( 1275): enable - sensor Gyro (handle 3) dis -> dis | |
V/Sensors ( 1275): int poll__activate(sensors_poll_device_t*, int, int) | |
V/Sensors ( 1275): int sensors_poll_context_t::activate(int, int) | |
V/Sensorsmpltiger( 1275): enable - sensor Accelerometer (handle 4) dis -> dis | |
V/Sensors ( 1275): int poll__activate(sensors_poll_device_t*, int, int) | |
V/Sensors ( 1275): int sensors_poll_context_t::activate(int, int) | |
E/Sensors ( 1275): LightSensor: enable fd = 62 , input_sysfs_path = /sys/class/input/event4/device/enable | |
E/Sensors ( 1275): LightSensor set flags = 0,mEnabled = 0 | |
V/Sensors ( 1275): int poll__activate(sensors_poll_device_t*, int, int) | |
V/Sensors ( 1275): int sensors_poll_context_t::activate(int, int) | |
V/Sensorsmpltiger( 1275): enable - sensor Accelerometer (handle 4) dis -> en | |
V/Sensorsmpltiger( 1275): enabled_sensors: 16 dmp_started: 0 | |
V/Sensorsmpltiger( 1275): calling inv_set_mpu_sensors(000070) | |
E/Sensors ( 1275): mEnabled = 0 ,mPendingEvent.light = 0.000000, mEventsSinceEnable = 0 | |
I/MPL-fifo( 1275): Actual ODR: 28571 mHz | |
V/Sensorsmpltiger( 1275): StartingDMP1211S11 | |
I/MPL-mldl_cfg_mpu:( 1275): inv_mpu_resume(,,,,0070) -> 0070 | |
V/Sensorsmpltiger( 1275): Starting DMP1213 | |
V/Sensors ( 1275): int poll__setDelay(sensors_poll_device_t*, int, int64_t) | |
V/Sensors ( 1275): int sensors_poll_context_t::setDelay(int, int64_t) | |
V/Sensorsmpltiger( 1275): setDelay - sensor Accelerometer (handle 4), rate 66 ms (15.00 Hz) | |
V/Sensorsmpltiger( 1275): set fifo rate - divider : 13, delay : 66 ms (15.00 Hz) | |
I/MPL-mldl_cfg_mpu:( 1275): inv_mpu_suspend(,,,,7fff) -> 0000 | |
I/MPL-fifo( 1275): Actual ODR: 14285 mHz | |
I/MPL-mldl_cfg_mpu:( 1275): inv_mpu_resume(,,,,0070) -> 0070 | |
I/nsVolume( 1275): nsVolume: sdcard state Mounted @ '/mnt/sdcard' gen 1 locked 0 fake 0 media 1 sharing 0 formatting 0 unmounting 0 | |
I/AutoMounter( 1275): AutoMounter state changed from IDLE to UMS_CONFIGURED | |
I/AutoMounter( 1275): UpdateState: ums:A1C1E0 mtp:A1C0E0 mode:0 usb:1 tryToShare:0 state:UMS_CONFIGURED | |
I/AutoMounter( 1275): UpdateState: Volume sdcard is Mounted and inserted @ /mnt/sdcard gen 1 locked 0 sharing dis | |
I/AutoMounter( 1275): UpdateState: Volume extsd is NoMedia and missing | |
I/AutoMounter( 1275): AutoMounter state changed from UMS_CONFIGURED to IDLE | |
I/AutoMounter( 1275): UpdateState: ums:A1C1E0 mtp:A1C0E0 mode:0 usb:1 tryToShare:0 state:IDLE | |
I/AutoMounter( 1275): UpdateState: Volume sdcard is Mounted and inserted @ /mnt/sdcard gen 1 locked 0 sharing dis | |
I/AutoMounter( 1275): UpdateState: Volume extsd is NoMedia and missing | |
I/AutoMounter( 1275): AutoMounter state changed from IDLE to UMS_CONFIGURED | |
I/AutoMounter( 1275): UpdateState: ums:A1C1E0 mtp:A1C0E0 mode:0 usb:1 tryToShare:0 state:UMS_CONFIGURED | |
I/AutoMounter( 1275): UpdateState: Volume sdcard is Mounted and inserted @ /mnt/sdcard gen 1 locked 0 sharing dis | |
I/AutoMounter( 1275): UpdateState: Volume extsd is NoMedia and missing | |
I/Gecko ( 1275): | |
I/Gecko ( 1275): ###!!! [Parent][OnMaybeDequeueOne] Error: Channel closing: too late to send/recv, messages will be lost | |
I/Gecko ( 1275): | |
I/(Nuwa) ( 1550): Failed to load native module at path '/system/b2g/components/libxpcomsample.so': (80004005) Cannot load library: load_library(linker.cpp:745): library "/system/b2g/components/libxpcomsample.so" not found | |
I/Gonk ( 1275): Connected to netd | |
D/WifiHW ( 1268): Enter: wifi_get_fw_path function, fw_type=0, | |
D/WifiHW ( 1268): Eneter: wifi_change_fw_path, fwpath = /system/vendor/modules/fw_bcm40183b2.bin. | |
D/SoftapController( 1268): Softap fwReload - Ok | |
I/VolumeManager( 1275): SetUnmountRequested for volume sdcard to 0 CanBeMounted = 1 | |
I/VolumeManager( 1275): SetMountRequested for volume sdcard to 0 CanBeMounted = 1 | |
I/VolumeManager( 1275): SetSharingMode for volume sdcard to 1 canBeShared = 1 | |
I/AutoMounter( 1275): AutoMounter state changed from UMS_CONFIGURED to IDLE | |
I/AutoMounter( 1275): UpdateState: ums:A1C1E0 mtp:A1C0E0 mode:0 usb:1 tryToShare:0 state:IDLE | |
I/AutoMounter( 1275): UpdateState: Volume sdcard is Mounted and inserted @ /mnt/sdcard gen 1 locked 0 sharing en-n | |
I/AutoMounter( 1275): UpdateState: Volume extsd is NoMedia and missing | |
I/AutoMounter( 1275): AutoMounter state changed from IDLE to UMS_CONFIGURED | |
I/AutoMounter( 1275): UpdateState: ums:A1C1E0 mtp:A1C0E0 mode:0 usb:1 tryToShare:0 state:UMS_CONFIGURED | |
I/AutoMounter( 1275): UpdateState: Volume sdcard is Mounted and inserted @ /mnt/sdcard gen 1 locked 0 sharing en-n | |
I/AutoMounter( 1275): UpdateState: Volume extsd is NoMedia and missing | |
I/AutoMounter( 1275): AutoMounter state changed from UMS_CONFIGURED to IDLE | |
I/AutoMounter( 1275): UpdateState: ums:A1C1E0 mtp:A1C0E0 mode:0 usb:1 tryToShare:0 state:IDLE | |
I/AutoMounter( 1275): UpdateState: Volume sdcard is Mounted and inserted @ /mnt/sdcard gen 1 locked 0 sharing en-n | |
I/AutoMounter( 1275): UpdateState: Volume extsd is NoMedia and missing | |
I/AutoMounter( 1275): AutoMounter state changed from IDLE to UMS_CONFIGURED | |
I/AutoMounter( 1275): UpdateState: ums:A1C1E0 mtp:A1C0E0 mode:0 usb:1 tryToShare:0 state:UMS_CONFIGURED | |
I/AutoMounter( 1275): UpdateState: Volume sdcard is Mounted and inserted @ /mnt/sdcard gen 1 locked 0 sharing en-n | |
I/AutoMounter( 1275): UpdateState: Volume extsd is NoMedia and missing | |
I/Gecko ( 1275): ###################################### forms.js loaded | |
I/Gecko ( 1275): ############################### browserElementPanning.js loaded | |
I/Gecko ( 1275): ######################## BrowserElementChildPreload.js loaded | |
I/Gecko ( 1275): *** UTM:SVC TimerManager:registerTimer - id: user-agent-updates-timer | |
I/GeckoConsole( 1275): UTM:SVC TimerManager:registerTimer - id: user-agent-updates-timer | |
I/Gecko ( 1632): ###################################### forms.js loaded | |
I/Gecko ( 1632): ############################### browserElementPanning.js loaded | |
I/Gecko ( 1632): ######################## BrowserElementChildPreload.js loaded | |
I/Gecko ( 1275): !! Creating a dummy channel for default_theme.gaiamobile.org (no appInfo) | |
V/Sensors ( 1275): int poll__activate(sensors_poll_device_t*, int, int) | |
V/Sensors ( 1275): int sensors_poll_context_t::activate(int, int) | |
V/Sensorsmpltiger( 1275): enable - sensor Accelerometer (handle 4) en -> dis | |
V/Sensorsmpltiger( 1275): enabled_sensors: 0 dmp_started: 1 | |
V/Sensorsmpltiger( 1275): Stopping DMP11 | |
I/MPL-mldl_cfg_mpu:( 1275): inv_mpu_suspend(,,,,7fff) -> 0000 | |
W/GeckoConsole( 1275): [JavaScript Error: "TypeError: invalid 'in' operand this._iccManager" {file: "app://system.gaiamobile.org/gaia_build_defer_index.js" line: 1087}] | |
I/wpa_supplicant( 1658): Successfully initialized wpa_supplicant | |
I/wpa_supplicant( 1658): rfkill: Cannot open RFKILL control device | |
I/Gecko ( 1275): Attempting load of libEGL.so | |
I/Gecko ( 1275): Can't find symbol '_Z35eglQueryStringImplementationANDROIDPvi'. | |
D/libEGL ( 1275): loaded /vendor/lib/egl/libEGL_POWERVR_SGX544_115.so | |
D/libEGL ( 1275): loaded /vendor/lib/egl/libGLESv1_CM_POWERVR_SGX544_115.so | |
D/libEGL ( 1275): loaded /vendor/lib/egl/libGLESv2_POWERVR_SGX544_115.so | |
I/libsuspend( 1275): Selected early suspend | |
I/libsuspend( 1275): Starting early suspend unblocker thread | |
E/IMGSRV ( 1275): :0: ####hwc_device_blank: disp:0 blank:0 | |
I/HWComposer( 1275): Creating new instance | |
V/Sensors ( 1275): int poll__activate(sensors_poll_device_t*, int, int) | |
V/Sensors ( 1275): int sensors_poll_context_t::activate(int, int) | |
E/Sensors ( 1275): LightSensor: enable fd = 101 , input_sysfs_path = /sys/class/input/event4/device/enable | |
E/Sensors ( 1275): LightSensor set flags = 1,mEnabled = 1 | |
V/Sensors ( 1275): int poll__setDelay(sensors_poll_device_t*, int, int64_t) | |
V/Sensors ( 1275): int sensors_poll_context_t::setDelay(int, int64_t) | |
W/GeckoConsole( 1275): [JavaScript Error: "ReferenceError: HomescreenWindowManager is not defined" {file: "app://system.gaiamobile.org/gaia_build_defer_index.js" line: 636}] | |
I/GeckoConsole( 1275): OpenGL compositor Initialized Succesfully. | |
I/GeckoConsole( 1275): Version: OpenGL ES 2.0 build 1.10@2379759 | |
I/GeckoConsole( 1275): Vendor: Imagination Technologies | |
I/GeckoConsole( 1275): Renderer: PowerVR SGX 544MP | |
I/GeckoConsole( 1275): FBO Texture Target: TEXTURE_2D | |
W/GeckoConsole( 1275): [JavaScript Error: "ReferenceError: ActivityWindowManager is not defined" {file: "app://system.gaiamobile.org/gaia_build_defer_index.js" line: 630}] | |
I/GeckoDump( 1275): -*- Shell.js: Starting USB debugger on /data/local/debugger-socket | |
V/Sensors ( 1275): int poll__activate(sensors_poll_device_t*, int, int) | |
V/Sensors ( 1275): int sensors_poll_context_t::activate(int, int) | |
E/Sensors ( 1275): LightSensor: enable fd = 113 , input_sysfs_path = /sys/class/input/event4/device/enable | |
E/Sensors ( 1275): LightSensor set flags = 0,mEnabled = 0 | |
I/GeckoDump( 1275): XXX FIXME : Got a mozContentEvent: inputmethod-update-layouts | |
I/GeckoDump( 1275): XXX FIXME : Got a mozContentEvent: inputmethod-update-layouts | |
I/Gecko ( 1693): ###################################### forms.js loaded | |
I/Gecko ( 1693): ############################### browserElementPanning.js loaded | |
I/Gecko ( 1693): ######################## BrowserElementChildPreload.js loaded | |
E/Profiler( 1275): 2014-10-15 13:46:15: stackwalker.cc:125: INFO: Couldn't load symbols for: /system/lib/libc.so|65BE1AFE5D5FC1823E38DB6B81F2EBE30 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0x0 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0x1 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0x0 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0x3ff00000 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0x23 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0xbe988450 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0x10 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0xffffffff | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0x1 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0x0 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0x1 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0x44f2e340 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0x1 | |
E/Profiler( 1275): 2014-10-15 13:46:15: stackwalker.cc:125: INFO: Couldn't load symbols for: /system/b2g/libxul.so|B4FACA4BE31E6835BFE283E7B9018A820 | |
E/Profiler( 1275): 2014-10-15 13:46:15: basic_code_modules.cc:88: INFO: No module at 0x4047b000 | |
E/Profiler( 1275): 2014-10-15 13:46:33: stackwalker.cc:125: INFO: Couldn't load symbols for: /system/lib/libc.so|65BE1AFE5D5FC1823E38DB6B81F2EBE30 | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0x0 | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0x0 | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0x24 | |
E/Profiler( 1275): 2014-10-15 13:46:33: stackwalker.cc:125: INFO: Couldn't load symbols for: /system/b2g/libxul.so|B4FACA4BE31E6835BFE283E7B9018A820 | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0x23 | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0xbe9884f8 | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0x10 | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0xffffffff | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0x1 | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0x0 | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0x0 | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0x44f2e340 | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0x1 | |
E/Profiler( 1275): 2014-10-15 13:46:33: basic_code_modules.cc:88: INFO: No module at 0x4047b000 | |
I/Gecko ( 1275): *** UTM:SVC TimerManager:notify - notified @mozilla.org/b2g/webapps-update-timer;1 | |
I/GeckoConsole( 1275): UTM:SVC TimerManager:notify - notified @mozilla.org/b2g/webapps-update-timer;1 | |
I/Gecko ( 1275): *** UTM:SVC TimerManager:notify - notified timerID: user-agent-updates-timer | |
I/GeckoConsole( 1275): UTM:SVC TimerManager:notify - notified timerID: user-agent-updates-timer | |
I/Gecko ( 1275): *** UTM:SVC TimerManager:registerTimer - id: user-agent-updates-timer |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment