Skip to content

Instantly share code, notes, and snippets.

@bzerangue
Last active November 28, 2024 12:19
Show Gist options
  • Save bzerangue/dca8fc2d63309ba2bd9f to your computer and use it in GitHub Desktop.
Save bzerangue/dca8fc2d63309ba2bd9f to your computer and use it in GitHub Desktop.
Mac OS X Utilities via Terminal: (Verify and Repair: Disk Permissions AND Disk / Software Update / TimeMachine)

Verify and Repair Disk Permissions via Terminal (Mac OS X)

Verify Permissions

diskutil verifyPermissions /

Repair Permissions

diskutil repairPermissions /

Verify and Repair Volume via Terminal (Mac OS X)

Launch Terminal from your Dock, Utilities folder, or via an app launcher like Alfred. Once launched, type or paste in the following command.

diskutil verifyVolume [drive name]

So, for your main hard drive, you could type or paste in something like:

diskutil verifyVolume /

Or, if you have an external drive attached, you can type or paste in the following:

diskutil verifyvolume /Volumes/[drive name]/

So for an external drive named “BackupStuff” you would enter:

diskutil verifyvolume /Volumes/BackupStuff/

If you see no messages, then you can assume that diskutil hasn’t found any errors, and you can move on. If, however, you get an error like “The volume Macintosh HD was found corrupt and needs to be repaired,” then you can repair the drive using diskutil as well.

To repair the drive, you can issue the following command into Terminal:

diskutil repairvolume /

Or, for that external drive as above:

diskutil repairvolume /Volumes/BackupStuff/

If unable to unmount drive on Mac

You can try booting from OS X recovery by holding CMD + R at the time of startup. Once booted from OS X recovery, select Terminal from the utilities and then at the unix prompt enter:

  • diskutil list
  • then press return and look for the disk identifier and enter the following command with the disk identifier:
  • sudo diskutil unmountDisk /dev/(enter here disk identifier name)
  • Press return and enter your admin password if prompted. This should unmount all volumes of the physical drive.
  • If still the above method didn't work, then the last option is to force the entire disk to unmount.
  • For that using the terminal application again, enter the following command: sudo diskutil unmount force /dev/(enter here disk identifier name)
  • Then press return and enter the admin password if prompted. This will definetely unmount the entire disk and all its related volume.

Mac OS X Software Update via Terminal

To get a list of available software updates, type the following command:

softwareupdate -l

You will see a list of available updates. You can then install all available software updates with the following command:

sudo softwareupdate -iva

The use of sudo is required to get superuser privileges to actually install the updates. You can also install only the recommended updates with:

sudo softwareupdate -irv

Or you can just install specific software updates by specifying the shorthand package name from the previous list, like so:

sudo softwareupdate -i iPhoneConfigurationUtility-3.2

If there are any updates you want to ignore, you can do so with the -–ignore flag, for example:

sudo softwareupdate --ignore iWeb3.0.2-3.0.2

If you want to see all the available command line shortcuts for Software Update, just type:

softwareupdate -h

This is really useful for remotely updating Macs, setting up automated updates via a bash script, or if you just want to geek out.

Control Time Machine from the command line

Time Machine is a great tool for ensuring that your data is safe, and it's pretty easy to set up and use. But for some users, the basic Time Machine interface isn't enough. As with most of OS X's functions, there is a command-line tool that lets you do many things with Time Machine. Here's how you can use the tmutil command to control and tweak Time Machine from Apple's command-line tool, Terminal.

The basics

Most people won't need to use this command for their backups because the Time Machine interface will suffice. Who will need it? People who want to manage remote Macs or who want to run scripts containing commands for Time Machine.

The basics of the tmutil command can be found by typing man tmutil in Terminal. (You'll find the Terminal app in your /Applications/Utilities folder.) The man page tells you what you can do with this command.

For example, to turn Time Machine on or off, you can run these commands:

sudo tmutil enable

sudo tmutil disable

The sudo command is required for many of the commands you issue with tmutil because you need administrative privileges; you'll have to enter your password after running the above commands.

If you want to run a Time Machine backup right away, on a Mac that either has Time Machine disabled, or, say, just before updating to a new version of OS X, you can run this command:

tmutil startbackup

This is the same as choosing Back Up Now from the Time Machine menu in the menu bar at the top of your screen.

And if you ever want to stop a backup, just run this:

tmutil stopbackup

Save disk space on your laptop

Since your laptop isn't always connected to its backup disk, Time Machine retains "local snapshots," or files that it will copy to your backup disk the next time it is available. However, these local snapshots take up space, and you may want to turn this feature off if you don't have much room on your hard disk. You can do so with the following command:

sudo tmutil disablelocal

Running this command will also delete any local snapshots. You can turn local snapshots back on by running:

sudo tmutil enablelocal

If you love delving into the nitty-gritty, and especially if you manage remote Macs, you'll find this to be a very useful tool.

Exclude files and folders

You can exclude certain files and folders from your Time Machine backups from the Time Machine pane in System Preferences. Naturally, you can also do this from the command line, too. Run this command:

sudo tmutil addexclusion

The part stands for the path to a file or folder. For example, if I want to exclude my Downloads folder from Time Machine backups, I would run the following:

sudo tmutil addexclusion ~/Downloads

The tmutil addexclusion command has an interesting property: it's sticky. When you use this command, the item you exclude remains in the Time Machine exclusion list even if you move it, which is not the case when you exclude items from the Time Machine preference pane. If you use the above command with the -p flag, then it will not be sticky, and will be the same as an exclusion you add from the Time Machine preference pane.

Manage remote backups

If you're managing a remote Mac, such as a server, you may want to change Time Machine settings for that computer. You can start by finding where Time Machine backups are stored. Run this command:

tmutil destinationinfo

You'll see something like this in Terminal:

Name : TM Backup

Kind : Local

Mount Point : /Volumes/TM Backup

ID : B9DAT9A6-0C37-4C39-A2AE-10A3403C97F9

To change the destination, you can use two commands. First, remove the current destination like this:

tmutil removedestination

In place of , type in the text string returned by the destinationinfo command. Then run this command to set up a new destination disk:

tmutil setdestination _volume_name_

Replace _volume_name_ with the name of the disk or volume you want to use. You can add multiple destinations as well, since Time Machine can rotate its backups on several disks or volumes. See man tmutil for more on setting up multiple backup destinations. (You can now do this without the command line too, see "How to create redundant Time Machine backups.")

Get Time Machine stats

Time Machine saves a lot of backups: one per hour for the past 24 hours; one a day for the past week; and one a week before that. You can get a list of all the backups on your Time Machine disk with this command:

tmutil listbackups

This will show the full path of each backup.

If you're curious about how much has changed in your Time Machine backups, there's a command that will let you find out how much of each backup is new. Run this command to see the delta between each of the Time Machine backups on your backup disk or volume:

tmutil calculatedrift _backup_folder_

Replace _backup_folder_ with the path of the folder containing your backups. This is not the Backups.backupdb folder at the top level of your Time Machine volume, but rather the next folder down; this is generally labeled with your Mac's name.

For example, when I ran this command on my backups, I saw data like this:

Here's what I saw when I ran the tmutil calculatedrift backup_folder command on my Mac.

Note that this command takes a long time to run, as your Mac has to calculate a lot of information.

The tmutil command offers many other options, such as the ability to inherit destinations, perform detailed comparisons of backups, restore items and much more. See man tmutil to find out all that you can do.

If you love delving into the nitty-gritty, and especially if you manage remote Macs, you'll find this to be a very useful tool.

Article via MacWorld

@brother2T
Copy link

silanukprach@MacMini ~ % sudo fsck_hfs -fryd / dev / disk5
Password:
/ is not a character device
CONTINUE? yes

** / (NO WRITE)
Can't get device block size
dev: No such file or directory
Can't stat dev
Can't stat dev: No such file or directory
/ is not a character device
CONTINUE? yes

** / (NO WRITE)
Can't get device block size
disk5: No such file or directory
Can't stat disk5
Can't stat disk5: No such file or directory
silanukprach@MacMini ~ %

@nielshutch
Copy link

A good guide, indeed.
A few simple comments - a partition on my iMac would not boot up. A grey screen appeared instead, with the prohibitory symbol (circle with a line through it). I decided to erase & reformat the partition, but Disk Utility could not unmount it. I followed the directions above to unmount the partition using Terminal.
First, diskutil list gave me its name (iMac20), but sudo diskutil unmount force /dev/iMac20 would not unmount it.

Out of curiosity, I then ran diskutil verifyvolume /Volumes/iMac20 to verify and repair the disk. Normally, Disk Utility would have to unmount the partition before verifying it. But Terminal didn't bother; it successfully verified the partition even though it previously could not unmount it. I then tried to unmount iMac20 again in Terminal, with no success.

Then I noticed a previous line in Terminal, where the partition had been given another name:
Finished file system verification on disk0s8 iMac20
Using the alternative name (disk0s8), I tried unmounting it again: sudo diskutil unmount force /dev/disk0s8
This time it worked: I could then mount & unmount it in Disk Utility, as well as erase it.

I don't know if this name thing has any significance, but it seemed to work.
(For others as ignorant as I – when a disk's name is highlighted in the left column of Disk Utility, its disk number appears at the bottom of the window.)

@hernessteve
Copy link

hernessteve commented Sep 2, 2024

Exactly what i needed. thanks. Thanks to this thread and https://www.handyrecovery.com/fix-corrupted-hard-drive-on-a-mac/ was able to figure out repair external hard drive mac terminal issue. Took me couple of days but absolutely worth it. Next time i will have solutions ready for a similar problems

@ellielo
Copy link

ellielo commented Nov 27, 2024

Thanks a lot for the help! I finally figured out that to fix corrupted hard drive mac isn’t as complicated as I initially thought. After some research, I came across this article that outlines the entire process: https://www.cleverfiles.com/howto/fix-corrupted-hard-drive-mac.html. It breaks everything down into simple, easy-to-follow steps and covers a range of solutions depending on the severity of the issue. If you’re dealing with a similar problem, I highly recommend checking it out. It helped me a lot in getting my drive back up and running without losing any data

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment