Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Save c-mauderer/137bc2e5dadd2d65041c4169406938f1 to your computer and use it in GitHub Desktop.
Save c-mauderer/137bc2e5dadd2d65041c4169406938f1 to your computer and use it in GitHub Desktop.
U-Boot 2018.11 (Jun 09 2019 - 18:09:04 +0200)
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment
Loading Environment from MMC... *** Warning - bad CRC, using default environment
<ethaddr> not set. Validating first E-fuse MAC
Net: cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Unable to read file boot.scr **
273 bytes read in 1 ms (266.6 KiB/s)
Loaded env from uEnv.txt
Importing environment from mmc0 ...
Running uenvcmd ...
856116 bytes read in 76 ms (10.7 MiB/s)
51485 bytes read in 7 ms (7 MiB/s)
373 bytes read in 2 ms (181.6 KiB/s)
## Booting kernel from Legacy Image at 80800000 ...
Image Name: RTEMS
Created: 2019-06-26 16:43:02 UTC
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 856052 Bytes = 836 KiB
Load Address: 80000000
Entry Point: 80000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Uncompressing Kernel Image ... OK
reserving fdt memory region: addr=88000000 size=e000
Loading Device Tree to 8ffef000, end 8fffffff ... OK
Starting kernel ...
RTEMS Beagleboard: am335x-based
RTEMS I2C TEST
nexus0: <RTEMS Nexus device>
ofwbus0: <Open Firmware Device Tree> on nexus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> on simplebus0
am335x_prcm0: <AM335x Power and Clock Management> mem 0x200000-0x203fff on simplebus1
simplebus2: <Flattened device tree simple bus> mem 0x210000-0x211fff on simplebus1
ti_scm0: <TI Control Module> mem 0-0x7ff on simplebus2
rtems_i2c0: <RTEMS libbsd I2C> mem 0x44e0b000-0x44e0bfff irq 70 on simplebus0
sdhci_ti0: <TI MMCHS (SDHCI 2.0)> mem 0x48060000-0x48060fff irq 64 on simplebus0
mmc0: <MMC/SD bus> on sdhci_ti0
sdhci_ti1: <TI MMCHS (SDHCI 2.0)> mem 0x481d8000-0x481d8fff irq 28 on simplebus0
mmc1: <MMC/SD bus> on sdhci_ti1
usbss0: <TI AM33xx integrated USB OTG controller> mem 0x47400000-0x47400fff on simplebus0
usbss0: TI AM335X USBSS v0.0.13
musbotg0: <TI AM33xx integrated USB OTG controller> mem 0x47401400-0x474017ff,0x47401000-0x474011ff irq 18 on usbss0
usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usbus0 on musbotg0
musbotg1: <TI AM33xx integrated USB OTG controller> mem 0x47401c00-0x47401fff,0x47401800-0x474019ff irq 19 on usbss0
usbus1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usbus1 on musbotg1
cpswss0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a1007ff,0x4a101200-0x4a1012ff irq 40,41,42,43 on simplebus0
cpswss0: CPSW SS Version 1.12 (0)
cpswss0: Initial queue size TX=128 RX=384
cpsw0: <Ethernet Switch Port> on cpswss0
miibus0: <MII bus> on cpsw0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
info: cpsw0: Ethernet address: d0:5f:b8:d6:d6:96
fb0: <AM335x LCD controller> mem 0x4830e000-0x4830efff irq 36 on simplebus0
iicbus0: <OFW I2C bus> on rtems_i2c0
iic0: <I2C generic I/O> on iicbus0
iicbus0: <unknown card> at addr 0x48
iicbus0: <unknown card> at addr 0xa0
tda0 at addr 0xe0 on iicbus0
mmcsd0: 4GB <SDHC TO 15.15 SN 000002F6 MFG 02/2017 by 25 DY> at mmc0 24.0MHz/4bit/65535-block
sdhci_ti1-slot0: Controller never released inhibit bit(s).
sdhci_ti1-slot0: ============== REGISTER DUMP ==============
sdhci_ti1-slot0: Sys addr: 0x00000000 | Version: 0x00003101
sdhci_ti1-slot0: Blk size: 0x00000004 | Blk cnt: 0x00000001
sdhci_ti1-slot0: Argument: 0x00000000 | Trn mode: 0x0000133a
sdhci_ti1-slot0: Present: 0x01f70006 | Host ctl: 0x00000002
sdhci_ti1-slot0: Power: 0x0000000d | Blk gap: 0x00000000
sdhci_ti1-slot0: Wake-up: 0x00000000 | Clock: 0x00008007
sdhci_ti1-slot0: Timeout: 0x00000006 | Int stat: 0x00108000
sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_ti1-slot0: Caps: 0x06e10080 | Caps2: 0x00000000
sdhci_ti1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_ti1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001
sdhci_ti1-slot0: ===========================================
sdhci_ti1-slot0: Controller never released inhibit bit(s).
sdhci_ti1-slot0: ============== REGISTER DUMP ==============
sdhci_ti1-slot0: Sys addr: 0x00000000 | Version: 0x00003101
sdhci_ti1-slot0: Blk size: 0x00000004 | Blk cnt: 0x00000001
sdhci_ti1-slot0: Argument: 0x00000000 | Trn mode: 0x0000133a
sdhci_ti1-slot0: Present: 0x01f70006 | Host ctl: 0x00000000
sdhci_ti1-slot0: Power: 0x0000000d | Blk gap: 0x00000000
sdhci_ti1-slot0: Wake-up: 0x00000000 | Clock: 0x00008007
sdhci_ti1-slot0: Timeout: 0x00000006 | Int stat: 0x00108000
sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_ti1-slot0: Caps: 0x06e10080 | Caps2: 0x00000000
sdhci_ti1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_ti1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001
sdhci_ti1-slot0: ===========================================
sdhci_ti1-slot0: Controller never released inhibit bit(s).
sdhci_ti1-slot0: ============== REGISTER DUMP ==============
sdhci_ti1-slot0: Sys addr: 0x00000000 | Version: 0x00003101
sdhci_ti1-slot0: Blk size: 0x00000004 | Blk cnt: 0x00000001
sdhci_ti1-slot0: Argument: 0x00000000 | Trn mode: 0x0000133a
sdhci_ti1-slot0: Present: 0x01f70006 | Host ctl: 0x00000000
sdhci_ti1-slot0: Power: 0x0000000d | Blk gap: 0x00000000
sdhci_ti1-slot0: Wake-up: 0x00000000 | Clock: 0x00008007
sdhci_ti1-slot0: Timeout: 0x00000006 | Int stat: 0x00108000
sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_ti1-slot0: Caps: 0x06e10080 | Caps2: 0x00000000
sdhci_ti1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_ti1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001
sdhci_ti1-slot0: ===========================================
sdhci_ti1-slot0: Controller never released inhibit bit(s).
sdhci_ti1-slot0: ============== REGISTER DUMP ==============
sdhci_ti1-slot0: Sys addr: 0x00000000 | Version: 0x00003101
sdhci_ti1-slot0: Blk size: 0x00000004 | Blk cnt: 0x00000001
sdhci_ti1-slot0: Argument: 0x00000000 | Trn mode: 0x0000133a
sdhci_ti1-slot0: Present: 0x01f70006 | Host ctl: 0x00000000
sdhci_ti1-slot0: Power: 0x0000000d | Blk gap: 0x00000000
sdhci_ti1-slot0: Wake-up: 0x00000000 | Clock: 0x00008007
sdhci_ti1-slot0: Timeout: 0x00000006 | Int stat: 0x00108000
sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_ti1-slot0: Caps: 0x06e10080 | Caps2: 0x00000000
sdhci_ti1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_ti1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001
sdhci_ti1-slot0: ===========================================
sdhci_ti1-slot0: Controller never released inhibit bit(s).
sdhci_ti1-slot0: ============== REGISTER DUMP ==============
sdhci_ti1-slot0: Sys addr: 0x00000000 | Version: 0x00003101
sdhci_ti1-slot0: Blk size: 0x00000004 | Blk cnt: 0x00000001
sdhci_ti1-slot0: Argument: 0x00000000 | Trn mode: 0x0000133a
sdhci_ti1-slot0: Present: 0x01f70006 | Host ctl: 0x00000000
sdhci_ti1-slot0: Power: 0x0000000d | Blk gap: 0x00000000
sdhci_ti1-slot0: Wake-up: 0x00000000 | Clock: 0x00008007
sdhci_ti1-slot0: Timeout: 0x00000006 | Int stat: 0x00108000
sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_ti1-slot0: Caps: 0x06e10080 | Caps2: 0x00000000
sdhci_ti1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_ti1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001
sdhci_ti1-slot0: ===========================================
mmc1: CMD6 failed, RESULT: 4
mmc1: Error setting erase group 4
sdhci_ti1-slot0: Got data interrupt 0x00100000, but there is no active data operation.
sdhci_ti1-slot0: ============== REGISTER DUMP ==============
sdhci_ti1-slot0: Sys addr: 0x00000000 | Version: 0x00003101
sdhci_ti1-slot0: Blk size: 0x00000004 | Blk cnt: 0x00000001
sdhci_ti1-slot0: Argument: 0x00000000 | Trn mode: 0x00000700
sdhci_ti1-slot0: Present: 0x01f70006 | Host ctl: 0x00000000
sdhci_ti1-slot0: Power: 0x0000000d | Blk gap: 0x00000000
sdhci_ti1-slot0: Wake-up: 0x00000000 | Clock: 0x00008007
sdhci_ti1-slot0: Timeout: 0x00000006 | Int stat: 0x00000001
sdhci_ti1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_ti1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_ti1-slot0: Caps: 0x06e10080 | Caps2: 0x00000000
sdhci_ti1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_ti1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001
sdhci_ti1-slot0: ===========================================
tda0: TDA19988
Vendor: [FUS]
Product: [073E] P24W-3
Serial number: YE2L505215
Manufactured 2008 Week 32
EDID Version 1.3
EDID Comment: �'��)���o������YE2L505215
Video Input: 80
Digital
Gamma: 2.20
Max Size: 52 cm x 32 cm
Features: 2a
DPMS active-off
RGB
Preferred timing
Chroma Info:
Red X: 0.639
Red Y: 0.639
Grn X: 0.299
Grn Y: 0.599
Blu X: 0.150
Blu Y: 0.059
Wht X: 0.313
Wht Y: 0.329
Range:
Horizontal: 10939 - 63327 kHz
Vertical: 46664 - 61557 Hz
Max Dot Clock: 29369 MHz
GTF2 hfreq: 32746
GTF2 C: 22402
GTF2 M: 62703
GTF2 J: 36847
GTF2 K: 64371
Video modes:
720x400 @ 70Hz (28320 738 846 900 412 414 449 -H +V)
640x480 @ 60Hz (25175 656 752 800 490 492 525 -H -V)
640x480 @ 75Hz (31500 656 720 840 481 484 500 -H -V)
800x600 @ 60Hz (40000 840 968 1056 601 605 628 +H +V)
800x600 @ 75Hz (49500 816 896 1056 601 604 625 +H +V)
1024x768 @ 60Hz (65000 1048 1184 1344 771 777 806 -H -V)
1024x768 @ 75Hz (78750 1040 1136 1312 769 772 800 +H +V)
1280x1024 @ 75Hz (135000 1296 1440 1688 1025 1028 1066 +H +V)
1680x1050 @ 60Hz (147140 1784 1968 2256 1051 1054 1087 +H +V)
1440x900 @ 60Hz (106470 1520 1672 1904 901 904 932 +H +V)
1440x900 @ 75Hz (136492 1536 1688 1936 901 904 940 +H +V)
1280x800 @ 60Hz (83462 1344 1480 1680 801 804 828 +H +V)
1280x800 @ 75Hz (107214 1360 1496 1712 801 804 835 +H +V)
1280x720 @ 60Hz (74482 1336 1472 1664 721 724 746 +H +V)
1280x1024 @ 60Hz (108000 1328 1440 1688 1025 1028 1066 +H +V)
1600x1200 @ 60Hz (162000 1664 1856 2160 1201 1204 1250 +H +V)
1920x1200 @ 60Hz (154000 1968 2000 2080 1203 1209 1235 +H -V)
1920x1080 @ 50Hz (148500 2448 2492 2640 1089 1095 1125 -H -V)
Preferred mode: 1920x1200 @ 60Hz
Number of extension blocks: 1
fb0: detected videomode: 1440x900 @ 60KHz
fb0: failed to attach fbd device
usbus0: 480Mbps High Speed USB v2.0
65535usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Mentor Graphics OTG Root HUB> at usbus0
uhub0: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Mentor Graphics OTG Root HUB> at usbus1
uhub1: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
RTEMS Shell on /dev/console. Use 'help' to list commands.
SHLL [/] # uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
ugen0.2: <Unknown > at usbus0 (disconnected)
ugen0.2: <Unknown > at usbus0 (disconnected)
ugen0.2: <Unknown > at usbus0 (disconnected)
ugen0.2: <Unknown > at usbus0 (disconnected)
ugen0.2: <Unknown > at usbus0 (disconnected)
ugen0.2: <Unknown > at usbus0 (disconnected)
ugen0.2: <Unknown > at usbus0 (disconnected)
ugen0.2: <Unknown > at usbus0 (disconnected)
ugen0.2: <Unknown > at usbus0 (disconnected)
ugen0.2: <Unknown > at usbus0 (disconnected)
ugen0.2: <Unknown > at usbus0 (disconnected)
ugen0.2: <Unknown > at usbus0 (disconnected)
ugen0.2: <Unknown > at usbus0 (disconnected)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment