c5e3

#!/bin/bash

cd ~/PATH/TO/DSDPLUS/

id=$(pactl list sink-inputs | grep -e 'application.name = "GQRX"' -e 'Sink Input #' | grep 'application.name = "GQRX"' -B1 | head -n1 | sed -e 's/Sink Input #//g')

unmute(){
	pactl set-sink-input-mute $id 0
	pactl unload-module $TMP
}

c5e3

#!/bin/bash
band=0

case "$1" in
	160) band=1836600; ds=2;;
	80) band=3592600; ds=2;;
	60) band=5287200; ds=2;;
	40) band=7038600; ds=2;;
	30) band=10138700; ds=2;;
	20) band=14095600; ds=2;;

c5e3

/*
* install this plugin for rhythmbox:
* https://github.com/pcarranza/rhythmweb2
*/

#include <ArduinoJson.h>
#include <ESP8266WiFi.h>
#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>

c5e3

// thx @trollkopp for helping me optimizing the code

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

// ARDUINO
#define OLED_MOSI  11
#define OLED_CLK   12

c5e3

#!/bin/bash

id=$(pactl list sink-inputs | grep -e 'application.name = "GQRX"' -e 'Sink Input #' | grep 'application.name = "GQRX"' -B1 | head -n1 | sed -e 's/Sink Input #//g')

unmute(){
	pactl set-sink-input-mute $id 0
}

trap "unmute" INT

c5e3

#!/bin/bash

modprobe -r ec_sys
modprobe ec_sys write_support=1

on="\x8a"
off="\x0a"

led(){
	echo -n -e $1 | dd of="/sys/kernel/debug/ec/ec0/io" bs=1 seek=12 count=1 conv=notrunc 2> /dev/null

c5e3

#!/bin/bash

# restore with the following command:
# gunzip --stdout <filename>.img.gz | dd bs=10M of=/dev/sdX

# pv(1) is optional and provides a progress bar
# just remove it from the pipe, when you don't want it

DATE=$(date +"%Y-%m-%d_%H-%M")
GREEN='\033[1;32m'

c5e3

#!/bin/sh

IPeth0=$(ifconfig eth0 | grep 'inet addr:' | cut -d: -f2 | awk '{ print $1}')
IPwlan0=$(ifconfig wlan0 | grep 'inet addr:' | cut -d: -f2 | awk '{ print $1}')

IP6eth0=$(ifconfig eth0 |  awk '/inet6/{print $3}' | grep -v ^::1 | grep -v ^fe80)
IP6wlan0=$(ifconfig wlan0 |  awk '/inet6/{print $3}' | grep -v ^::1 | grep -v ^fe80)

if [ -z "$IPeth0" ]
then

c5e3

#!/bin/bash

cat $1 | grep '^IRA:' > $1_positions.csv
sed -i -e 's/^.\+sat:/sat:/' -e 's/\( RAI\:.\+\)\|\(sat:\)\|\(beam:\)\|\(pos=(\)\|\()\)\|\(alt=\)\|\(+\)//g' -e 's%/%;%' -e 's/ /;/g' -e '/^00;00/d' -e 's/$/000/g' -e '/[0-9]\+;[0-9]\+;\([0-9]\+\|-[0-9]\+\).[0-9]\+;\([0-9]\+\|-[0-9]\+\).[0-9]\+;[0-9]\+/!d' $1_positions.csv
awk -F ';' '($5<=100000){print}' $1_positions.csv > $1_positions_spotbeams.csv
awk -F ';' '($5>100000){print}' $1_positions.csv > $1_positions_satellites.csv
sed -i '1 i\satellite;beam;latitude;longitude;altitude' $1_positions*.csv

c5e3

#include <stdio.h>


int main(int argc, char **argv)
{
	int i=0,j=0,temp=0,mod=0,flag=0;
    
    printf("[0] +\n[1] *\nselect operator: ");
    scanf("%d", &flag);