gistfile1.txt

vagrant@vagrant-ubuntu-trusty-64:/vagrant/eurorack-modules$ make -f peaks/makefile upload
openocd -f stmlib/programming/jtag/interface_arm-usb-ocd-h.cfg -f stmlib/programming/jtag/stm32f10x_jtag.cfg -f stmlib/programming/jtag/prelude_f10x.cfg  -f stmlib/programming/jtag/erase_f10x.cfg -c "flash write_bank 0 build/peaks/peaks_bootloader_combo.bin 0x0" -c "verify_image build/peaks/peaks_bootloader_combo.bin" -f stmlib/programming/jtag/postlude.cfg || openocd -f stmlib/programming/jtag/interface_arm-usb-ocd-h.cfg -f stmlib/programming/jtag/stm32f10x_jtag.cfg -f stmlib/programming/jtag/prelude_f10x.cfg  -f stmlib/programming/jtag/erase_f10x.cfg -c "flash write_bank 0 build/peaks/peaks_bootloader_combo.bin 0x0" -c "verify_image build/peaks/peaks_bootloader_combo.bin" -f stmlib/programming/jtag/postlude.cfg
Open On-Chip Debugger 0.9.0 (2016-02-16-21:26)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
adapter speed: 1000 kHz
adapter_nsrst_delay: 200
jtag_ntrst_delay: 200
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain connect_deassert_srst
Warn : Using DEPRECATED interface driver 'ft2232'
Info : Consider using the 'ftdi' interface driver, with configuration files in interface/ftdi/...
Info : max TCK change to: 30000 kHz
Info : clock speed 1000 kHz
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: stm32.cpu: IR capture error; saw 0x00 not 0x01
Warn : Bypassing JTAG setup events due to errors
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Error: Target not examined yet

Open On-Chip Debugger 0.9.0 (2016-02-16-21:26)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
adapter speed: 1000 kHz
adapter_nsrst_delay: 200
jtag_ntrst_delay: 200
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain connect_deassert_srst
Warn : Using DEPRECATED interface driver 'ft2232'
Info : Consider using the 'ftdi' interface driver, with configuration files in interface/ftdi/...
Info : max TCK change to: 30000 kHz
Info : clock speed 1000 kHz
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: stm32.cpu: IR capture error; saw 0x00 not 0x01
Warn : Bypassing JTAG setup events due to errors
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Warn : Invalid ACK 0 in JTAG-DP transaction
Error: Target not examined yet

make: *** [upload_combo_jtag] Error 1