Forked from nerotard/HRT Homebrewing by nerotard,gc
Created
October 30, 2021 20:16
-
-
Save caiodanielnunessantos/7633100a7a7574da06e6e824be9323f8 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
https://otokonokopharma.wixsite.com/otokonokopharma | |
Every ingredient can be bought from Amazon. | |
(except the raw powder that you can find on Alibaba, most suppliers there are trustable don't worry) | |
What you'll need: | |
Oil injections: | |
-Benzyl benzoate | |
-Benzyl alcohool | |
-Raw powder | |
-Carrier oil | |
Aqueous suspension: | |
-Distilled water | |
-Benzyl alcohool | |
-Soy lecitin | |
-Sodium Sulfate anhydrous | |
-Polyethylene glycol 4000 | |
-raw powder | |
Materials: | |
- .45 needles (for retaining bigger particles, filters are not really necessary) | |
-Beaker | |
-10ml vials | |
-glass stick (for mixing it, you can use a spoon, but glass is preferred) | |
-vial crimper (optional you can crimp with a knife) | |
-Ethanol (for sterilizing the materials beforehand) | |
Recipe for Estradiol 100ml, 40mg/ml: | |
This works with any E ester (Cypionate, Valerate etc). | |
-Estradiol Valerate - 4000mg | |
-Benzyl benzoate (Solvent) - 44% | |
-Benzyl alcohol - 2% (if you pretend to store for a really long time 4 years+, I personally recommend 4% just to be sure) | |
-Carrier Oil (any oil can be used, but I recommend MCT or at least Safflower Oil) - 50.38 ml | |
Recipe for Progesterone 100 50mg/ml | |
Because BB is used for solving Esterified components, it isn't used for pure progesterone, | |
instead I use a higher dose of BA (don't worry, because of having more oil percentually, it won't hurt) | |
-Progesterone - 5000mg | |
-Benzyl Alcohool - 10% | |
-Carrier Oil - 85.52ml | |
Recipe for Aqueous Suspension 100ml | |
I use Aqueous suspension for Medroxiprogesterone acetate, but the same can be used for Estradiol, | |
progesterone(you can, but it hurts like hell, hormones without ester will always hurt) | |
if you have some problems with oil injections (if you're brave enough, you could even try dutasteride injections with it) | |
-Distilled water - 100ml | |
-Soy lecitin - 2% (this one was a find of mine, most other recipes for aqueous suspension asks for Polissorbate 80 which is really hard to find over here, but soy lecitin is cheap and works really nice) | |
-Benzyl Alcohool 2% (this one if you put more, or less, the suspension won't work) | |
-Sodium Sulfate anhydrous - 3g (30mg/ml) | |
-Polyethylene glycol 4000 - 4g (40mg/ml) If you can't find Pg4000, 3350, or other above 3000 they work the same. | |
How to Make them | |
The procces is fairly simple, | |
Oil just mix it all in Beaker (or any Glassware you have) and give it a water bath for 30 minutes, | |
when you finish it just put in some flask and to sterelize you can take to the oven for 30 minutes at 230º | |
(it's overkill, if you store the powder in a safe space and clean everything, just heating in a water bath would kill most bacteria) | |
Aqueous Suspension put everything in a beaker, (except the hormone powder), | |
heat it in a water bath, until the lecitin is mostly dissolved (part of the lecitin will be floating over the water and won't dissolve, that is normal, and you won't be using that), | |
take all the water and put in a flask with the hormones of your choice, mix it and if for sterelizing it you can use a pressure cooker for 15 minutes after getting pressurized | |
(Pressure cooker is needed Otherwise the flask can break because of internal pression) | |
That's all, Thank you for you time, | |
If you're lazy I also sell them for 30 dollar/9 months +5 dollar shipping worldwide. | |
my email for contact: yukinogc@gmail.com | |
Here just an image of my HRT: https://imgur.com/a/kmRenqD |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment