Skip to content

Instantly share code, notes, and snippets.

@caius-iulius
Created October 9, 2023 07:42
Show Gist options
  • Save caius-iulius/5174620a1980cbaea82e68405ce9ae7f to your computer and use it in GitHub Desktop.
Save caius-iulius/5174620a1980cbaea82e68405ce9ae7f to your computer and use it in GitHub Desktop.
TLP Report
==> STEP1 <==
--- TLP 1.6.1 --------------------------------------------
+++ Configured Settings:
defaults.conf L0006: TLP_ENABLE="1"
defaults.conf L0007: TLP_WARN_LEVEL="3"
defaults.conf L0008: TLP_PERSISTENT_DEFAULT="0"
defaults.conf L0009: DISK_IDLE_SECS_ON_AC="0"
defaults.conf L0010: DISK_IDLE_SECS_ON_BAT="2"
defaults.conf L0011: MAX_LOST_WORK_SECS_ON_AC="15"
defaults.conf L0012: MAX_LOST_WORK_SECS_ON_BAT="60"
defaults.conf L0013: CPU_ENERGY_PERF_POLICY_ON_AC="balance_performance"
defaults.conf L0014: CPU_ENERGY_PERF_POLICY_ON_BAT="balance_power"
defaults.conf L0015: NMI_WATCHDOG="0"
defaults.conf L0016: DISK_DEVICES="nvme0n1 sda"
defaults.conf L0017: DISK_APM_LEVEL_ON_AC="254 254"
defaults.conf L0018: DISK_APM_LEVEL_ON_BAT="128 128"
defaults.conf L0019: DISK_APM_CLASS_DENYLIST="usb ieee1394"
defaults.conf L0020: DISK_IOSCHED="keep keep"
defaults.conf L0021: SATA_LINKPWR_ON_AC="med_power_with_dipm"
defaults.conf L0022: SATA_LINKPWR_ON_BAT="med_power_with_dipm"
defaults.conf L0023: AHCI_RUNTIME_PM_ON_AC="on"
defaults.conf L0024: AHCI_RUNTIME_PM_ON_BAT="auto"
defaults.conf L0025: AHCI_RUNTIME_PM_TIMEOUT="15"
defaults.conf L0026: PCIE_ASPM_ON_AC="default"
defaults.conf L0027: PCIE_ASPM_ON_BAT="default"
defaults.conf L0028: RADEON_DPM_PERF_LEVEL_ON_AC="auto"
defaults.conf L0029: RADEON_DPM_PERF_LEVEL_ON_BAT="auto"
defaults.conf L0030: RADEON_POWER_PROFILE_ON_AC="default"
defaults.conf L0031: RADEON_POWER_PROFILE_ON_BAT="default"
defaults.conf L0032: WIFI_PWR_ON_AC="off"
defaults.conf L0033: WIFI_PWR_ON_BAT="on"
defaults.conf L0034: WOL_DISABLE="Y"
/etc/tlp.conf L0329: SOUND_POWER_SAVE_ON_AC="0"
/etc/tlp.conf L0330: SOUND_POWER_SAVE_ON_BAT="10"
defaults.conf L0037: SOUND_POWER_SAVE_CONTROLLER="Y"
defaults.conf L0038: BAY_POWEROFF_ON_AC="0"
defaults.conf L0039: BAY_POWEROFF_ON_BAT="0"
defaults.conf L0040: BAY_DEVICE="sr0"
defaults.conf L0041: RUNTIME_PM_ON_AC="on"
defaults.conf L0042: RUNTIME_PM_ON_BAT="auto"
defaults.conf L0043: RUNTIME_PM_DRIVER_DENYLIST="mei_me nouveau radeon"
defaults.conf L0044: USB_AUTOSUSPEND="1"
defaults.conf L0045: USB_EXCLUDE_AUDIO="1"
defaults.conf L0046: USB_EXCLUDE_BTUSB="0"
defaults.conf L0047: USB_EXCLUDE_PHONE="0"
defaults.conf L0048: USB_EXCLUDE_PRINTER="1"
defaults.conf L0049: USB_EXCLUDE_WWAN="0"
defaults.conf L0050: RESTORE_DEVICE_STATE_ON_STARTUP="0"
defaults.conf L0051: RESTORE_THRESHOLDS_ON_BAT="0"
defaults.conf L0052: NATACPI_ENABLE="1"
defaults.conf L0053: TPACPI_ENABLE="1"
defaults.conf L0054: TPSMAPI_ENABLE="1"
/etc/tlp.conf L0479: DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth nfc wwan"
/etc/tlp.conf L0502: STOP_CHARGE_THRESH_BAT0="1"
/etc/tlp.conf L0532: DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
/etc/tlp.conf L0533: DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
/etc/tlp.conf L0538: DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+++ System Info
System = LENOVO IdeaPad Pro 5 14IRH8 83AL
BIOS = LJCN20WW
EC Firmware = 1.20
OS Release = Arch Linux
Kernel = 6.5.6-arch2-1 #1 SMP PREEMPT_DYNAMIC Sat, 07 Oct 2023 08:14:55 +0000 x86_64
/proc/cmdline = initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=255d1831-681c-432d-a162-218fcee67a68 zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs
Init system = systemd
Boot mode = UEFI
Suspend mode = [s2idle] deep
+++ TLP Status
State = enabled
RDW state = enabled
Last run = 08:55:52, 175 sec(s) ago
Mode = battery
Power source = battery
+++ Battery Care
Plugin: lenovo
Supported features: charge threshold
Driver usage:
* vendor (ideapad_laptop) = active (charge threshold)
Parameter value range:
* STOP_CHARGE_THRESH_BAT0: 0(off), 1(on) -- battery conservation mode
/sys/bus/platform/drivers/ideapad_acpi/VPC2004:00/conservation_mode = 1 (60%)
+++ Battery Status: BAT0
/sys/class/power_supply/BAT0/manufacturer = SMP
/sys/class/power_supply/BAT0/model_name = L22M4PF3
/sys/class/power_supply/BAT0/cycle_count = 8
/sys/class/power_supply/BAT0/energy_full_design = 75000 [mWh]
/sys/class/power_supply/BAT0/energy_full = 77160 [mWh]
/sys/class/power_supply/BAT0/energy_now = 52530 [mWh]
/sys/class/power_supply/BAT0/power_now = 7372 [mW]
/sys/class/power_supply/BAT0/status = Discharging
Charge = 68.1 [%]
Capacity = 102.9 [%]
==> STEP2 <==
--- TLP 1.6.1 --------------------------------------------
+++ Battery Care
Plugin: lenovo
Supported features: charge threshold
Driver usage:
* vendor (ideapad_laptop) = active (charge threshold)
Parameter value range:
* STOP_CHARGE_THRESH_BAT0: 0(off), 1(on) -- battery conservation mode
/sys/bus/platform/drivers/ideapad_acpi/VPC2004:00/conservation_mode = 1 (60%)
+++ Battery Status: BAT0
/sys/class/power_supply/BAT0/manufacturer = SMP
/sys/class/power_supply/BAT0/model_name = L22M4PF3
/sys/class/power_supply/BAT0/cycle_count = 8
/sys/class/power_supply/BAT0/energy_full_design = 75000 [mWh]
/sys/class/power_supply/BAT0/energy_full = 77190 [mWh]
/sys/class/power_supply/BAT0/energy_now = 61760 [mWh]
/sys/class/power_supply/BAT0/power_now = 0 [mW]
/sys/class/power_supply/BAT0/status = Not charging
Charge = 80.0 [%]
Capacity = 102.9 [%]
==> STEP3 <==
--- TLP 1.6.1 --------------------------------------------
+++ Battery Care
Plugin: lenovo
Supported features: charge threshold
Driver usage:
* vendor (ideapad_laptop) = active (charge threshold)
Parameter value range:
* STOP_CHARGE_THRESH_BAT0: 0(off), 1(on) -- battery conservation mode
/sys/bus/platform/drivers/ideapad_acpi/VPC2004:00/conservation_mode = 0 (100%)
+++ Battery Status: BAT0
/sys/class/power_supply/BAT0/manufacturer = SMP
/sys/class/power_supply/BAT0/model_name = L22M4PF3
/sys/class/power_supply/BAT0/cycle_count = 8
/sys/class/power_supply/BAT0/energy_full_design = 75000 [mWh]
/sys/class/power_supply/BAT0/energy_full = 77190 [mWh]
/sys/class/power_supply/BAT0/energy_now = 62300 [mWh]
/sys/class/power_supply/BAT0/power_now = 56556 [mW]
/sys/class/power_supply/BAT0/status = Charging
Charge = 80.7 [%]
Capacity = 102.9 [%]
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment