Xavier Fail Flash - DevKit - UART Output

gistfile1.txt

5.1.6-t194-41334769-1740dd39)
[0004.722] I> Boot-mode: Platform RCM
[0004.726] I> Chip revision : A02P
[0004.729] I> Bootrom patch version : 15 (correctly patched)
[0004.734] I> ATE fuse revision : 0x200
[0004.737] I> Ram repair fuse : 0x0
[0004.740] I> Ram Code : 0x2
[0004.743] I> rst_source : 0x0
[0004.746] I> rst_level : 0x0
[0004.749] I> USB configuration success
[0006.814] I> mb2 image downloaded
[0006.840] I> Recovery boot mode 0
[0006.844] I> Boot-device: eMMC
[0006.849] I> UPHY full init done
[0006.853] I> MB1 done

[0006.857] W> Profiler not initialized
[0006.861] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-e677d209)
[0006.869] W> Profiler not initialized
[0006.872] I> DMA Heap @ [0x40020000 - 0x40065800]
[0006.877] I> Default Heap @ [0xd486400 - 0xd48a400]
[0006.882] W> Profiler not initialized
[0006.885] W> Profiler not initialized
[0006.889] E> DEVICE_PROD: Invalid value data = 0, size = 0.
[0006.894] W> device prod register failed
[0006.898] W> Profiler not initialized
[0006.966] I> sdmmc DDR50 mode
[0006.970] I> No supported QSPI flash found
[0006.974] E> QSPI Flash: Insufficient flash size (0 MB)
[0006.979] I> QSPI Flash is not present.
[0007.030] E> Link startup dme_set failed
[0007.034] E> UFS initialization failed
[0007.038] I> UFS is not present
[0007.041] W> Profiler not initialized
[0007.048] I> Found 17 partitions in SDMMC_BOOT (instance 3)
[0007.058] I> Found 42 partitions in SDMMC_USER (instance 3)
[0007.063] W> Profiler not initialized
[0007.067] W> Profiler not initialized
[0007.070] W> Profiler not initialized
[0007.074] I> Entering 3p server
[0007.077] I> USB configuration success
[0007.987] I> Populate chip info
[0008.014] I> Populate eeprom info
[0008.019] I> Populate eeprom info for module cvm
m HW fuses.
[0128.228] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39)
[0128.233] I> Boot-mode: RCM
[0128.236] I> Chip revision : A02P
[0128.239] I> Bootrom patch version : 15 (correctly patched)
[0128.244] I> ATE fuse revision : 0x200
[0128.247] I> Ram repair fuse : 0x0
[0128.251] I> Ram Code : 0x2
[0128.253] I> rst_source : 0xb
[0128.256] I> rst_level : 0x1
[0128.260] I> USB configuration success
[0130.283] I> bct_bootrom image downloaded
[0130.291] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT.
[0130.299] I> Temperature = 29000
[0130.302] W> Skipping boost for clk: BPMP_CPU_NIC
[0130.306] W> Skipping boost for clk: BPMP_APB
[0130.310] W> Skipping boost for clk: AXI_CBB
[0130.314] W> Skipping boost for clk: AON_CPU_NIC
[0130.319] W> Skipping boost for clk: CAN1
[0130.322] W> Skipping boost for clk: CAN2
[0130.327] I> Boot-device: eMMC
[0130.330] I> Boot-device: eMMC
[0130.332] I> bct_mb1 image downloaded
[0130.343] I> ECC region[0]: Start:0x0, End:0x0
[0130.347] I> ECC region[1]: Start:0x0, End:0x0
[0130.351] I> ECC region[2]: Start:0x0, End:0x0
[0130.355] I> ECC region[3]: Start:0x0, End:0x0
[0130.359] I> ECC region[4]: Start:0x0, End:0x0
[0130.363] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000
[0130.369] I> Non-ECC region[1]: Start:0x0, End:0x0
[0130.374] I> Non-ECC region[2]: Start:0x0, End:0x0
[0130.378] I> Non-ECC region[3]: Start:0x0, End:0x0
[0130.383] I> Non-ECC region[4]: Start:0x0, End:0x0
[0130.389] E> FAILED: Thermal config
[0130.396] E> FAILED: MEMIO rail config
[0130.411] E> Task 50 failed (err: 0x7979061c)
[0130.415] E> Top caller module: ALIASCHECKER, error module: ALIASCHECKER, reason: 0x1c, aux_info: 0x06
[0130.424] I> MB1(1.5.1.6-t194-41334769-1740dd39) BIT boot status dump :
00000000000111111111100001111111111111100110001111100000000000000000000000000000000000000000000000000000
00000000000000000000000011001000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000