Xavier AFT Carrier - UART log - Failed Flash 4.5.1

gistfile1.txt

[0156.212] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[0156.220] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39)
[0156.226] I> Boot-mode: Platform RCM
[0156.229] I> Chip revision : A02P
[0156.232] I> Bootrom patch version : 15 (correctly patched)
[0156.237] I> ATE fuse revision : 0x200
[0156.241] I> Ram repair fuse : 0x0
[0156.244] I> Ram Code : 0x3
[0156.247] I> rst_source : 0x0
[0156.249] I> rst_level : 0x0
[0156.253] I> USB configuration success
[0158.318] I> mb2 image downloaded
[0158.344] I> Recovery boot mode 0
[0158.348] I> Boot-device: eMMC
[0158.352] I> UPHY full init done
[0158.357] I> MB1 done

[0158.362] W> Profiler not initialized
[0158.365] I> Welcome to MB2(TBoot-BPMP) Applet (version: 00.00.2018.32-mobile-e677d209)
[0158.373] W> Profiler not initialized
[0158.377] I> DMA Heap @ [0x40020000 - 0x40065800]
[0158.381] I> Default Heap @ [0xd486400 - 0xd48a400]
[0158.386] W> Profiler not initialized
[0158.390] W> Profiler not initialized
[0158.393] E> DEVICE_PROD: Invalid value data = 0, size = 0.
[0158.398] W> device prod register failed
[0158.402] W> Profiler not initialized
[0158.474] I> sdmmc DDR50 mode
[0158.478] I> No supported QSPI flash found
[0158.482] E> QSPI Flash: Insufficient flash size (0 MB)
[0158.487] I> QSPI Flash is not present.
[0158.538] E> Link startup dme_set failed
[0158.542] E> UFS initialization failed
[0158.545] I> UFS is not present
[0158.548] W> Profiler not initialized
[0158.556] I> Found 17 partitions in SDMMC_BOOT (instance 3)
[0158.565] I> Found 42 partitions in SDMMC_USER (instance 3)
[0158.571] W> Profiler not initialized
[0158.574] W> Profiler not initialized
[0158.578] W> Profiler not initialized
[0158.581] I> Entering 3p server
[0158.584] I> USB configuration success
[0159.495] I> Populate chip info
[0159.523] I> Populate eeprom info
[0159.527] I> Populate eeprom info for module cvm
��
[0030.720] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses.
[0030.729] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39)
[0030.734] I> Boot-mode: RCM
[0030.737] I> Chip revision : A02P
[0030.740] I> Bootrom patch version : 15 (correctly patched)
[0030.745] I> ATE fuse revision : 0x200
[0030.749] I> Ram repair fuse : 0x0
[0030.752] I> Ram Code : 0x3
[0030.754] I> rst_source : 0xb
[0030.757] I> rst_level : 0x1
[0030.761] I> USB configuration success
[0032.783] I> bct_bootrom image downloaded
[0032.791] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT.
[0032.799] I> Temperature = 25500
[0032.802] W> Skipping boost for clk: BPMP_CPU_NIC
[0032.807] W> Skipping boost for clk: BPMP_APB
[0032.811] W> Skipping boost for clk: AXI_CBB
[0032.815] W> Skipping boost for clk: AON_CPU_NIC
[0032.819] W> Skipping boost for clk: CAN1
[0032.823] W> Skipping boost for clk: CAN2
[0032.827] I> Boot-device: eMMC
[0032.830] I> Boot-device: eMMC
[0032.833] I> bct_mb1 image downloaded
[0032.843] E> NONE: Invalid value MemBct dram size: 0MB for slot: 3.
[0032.849] C> OEM authentication of MEM-BCT failed!!!
[0032.853] E> NV3P_SERVER: Failed to verify image bct_mem.