Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
I3 configuration file
# i3status configuration file.
# see "man i3status" for documentation.
# It is important that this file is edited as UTF-8.
# The following line should contain a sharp s:
# ß
# If the above line is not correctly displayed, fix your editor first!
general {
colors = true
interval = 5
# foreground
# color_good="#2e5ca0"
color_good="#4b73a0"
# warning
# color_bad="#4186e0"
color_bad="#81b7d3"
# gray
# color_degraded="#384780"
color_degraded="#bbc0c0"
#color_good = "#2AA198"
#color_bad = "#586E75"
#color_degraded = "#DC322F"
}
order += "cpu_usage"
# order += "load"
order += "disk /"
# order += "disk /home"
order += "wireless _first_"
order += "ethernet _first_"
order += "battery 0"
order += "load"
order += "tztime local"
# order += "ipv6"
cpu_usage {
format = "  %usage "
}
load {
format = "  %1min "
# max_threshold = 0.3
}
disk "/" {
# format = " hdd %avail "
format = "  %avail "
}
ethernet _first_ {
# if you use %speed, i3status requires root privileges
format_up = "  %ip" #%speed "
format_down = " / "
}
battery 0 {
# format = "%status %percentage %remaining %emptytime"
format = " %status %percentage"
format_down = "No battery"
# last_full_capacity = true
integer_battery_capacity = true
# status_chr = ""
status_chr = ""
status_bat = ""
# status_bat = "bat"
# status_bat = "☉"
# status_full = ""
status_full = ""
low_threshold = 15
threshold_type = time
}
tztime local {
# format = "%Y-%m-%d %H:%M:%S"
format = "  %d.%m.  %I:%M %p "
}
## .i3/config
# i3 config file (v4)
# Purple theme
#set $background #201315
#set $foreground #e06fda
#set $gray #803466
#set $primary #a0197a
#set $secondary #a01da0
#set $tertiary #a06d72
#set $warning #a06a6a
# Blue theme
#set $background #091320
#set $foreground #2e5ca0
#set $gray #384780
#set $primary #4050a0
#set $secondary #4a55a0
#set $tertiary #5057a0
#set $warning #4186e0
set $background #0d1420
set $foreground #4b73a0
set $gray #bbc0c0
set $primary #506aa0
set $secondary #3e64a0
set $tertiary #436aa0
set $warning #81b7d3
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
# Set mod key (Mod1=<Alt>, Mod4=<Super>)
set $mod Mod4
# set default desktop layout (default is tiling)
# workspace_layout tabbed <stacking|tabbed>
# Configure border style <normal|1pixel|pixel xx|none|pixel>
new_window pixel 1
new_float normal
# Hide borders
hide_edge_borders none
# change borders
bindsym $mod+u border none
bindsym $mod+y border pixel 1
bindsym $mod+n border normal
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font xft:FiraMono 10
# Use Mouse+$mod to drag floating windows
floating_modifier $mod
# start a terminal
bindsym $mod+Return exec xfce4-terminal
# kill focused window
bindsym $mod+Shift+q kill
# start program launcher
bindsym $mod+d exec --no-startup-id dmenu_recency
# launch categorized menu
bindsym $mod+z exec --no-startup-id morc_menu
################################################################################################
## sound-section - DO NOT EDIT if you wish to automatically upgrade Alsa -> Pulseaudio later! ##
################################################################################################
#exec --no-startup-id volumeicon
#bindsym $mod+Ctrl+m exec terminal -e 'alsamixer'
exec --no-startup-id pulseaudio
exec --no-startup-id pa-applet
bindsym $mod+Ctrl+m exec pavucontrol
################################################################################################
# Screen brightness controls
bindsym $mod+Shift+F6 exec "xbacklight -inc 10; notify-send 'brightness up'"
# bindsym XF86MonBrightnessUp exec "xbacklight -inc 10; notify-send 'brightness up'"
bindsym $mod+Shift+F5 exec "xbacklight -dec 10; notify-send 'brightness down'"
# bindsym XF86MonBrightnessDown exec "xbacklight -dec 10; notify-send brightness down'"
# Start Applications
bindsym $mod+Ctrl+b exec terminal -e 'bmenu'
bindsym $mod+F2 exec firefox
bindsym $mod+F3 exec pcmanfm
bindsym $mod+Shift+F3 exec gksu pcmanfm
# bindsym $mod+F3 exec ranger
bindsym $mod+F4 exec atom
bindsym $mod+F5 exec terminal -e 'mocp'
bindsym $mod+t exec --no-startup-id pkill compton
bindsym $mod+Ctrl+t exec --no-startup-id compton -b
bindsym $mod+Shift+d --release exec "killall dunst; exec notify-send 'restart dunst'"
bindsym Print exec --no-startup-id i3-scrot
bindsym $mod+Print --release exec --no-startup-id i3-scrot -w
bindsym $mod+Shift+Print --release exec --no-startup-id i3-scrot -s
bindsym $mod+Shift+h exec xdg-open /usr/share/doc/manjaro/i3_help.pdf
bindsym $mod+Ctrl+x --release exec --no-startup-id xkill
bindsym $mod+Shift+m exec quickswitch.py
# focus_follows_mouse no
# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+odiaeresis focus right
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+odiaeresis move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# workspace back and forth (with/without active container)
workspace_auto_back_and_forth yes
bindsym $mod+b workspace back_and_forth
bindsym $mod+Shift+b move container to workspace back_and_forth; workspace back_and_forth
# split orientation
bindsym $mod+h split h;exec notify-send 'tile horizontally'
bindsym $mod+v split v;exec notify-send 'tile vertically'
bindsym $mod+q split toggle
# toggle fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle
# toggle sticky
bindsym $mod+Shift+s sticky toggle
# focus the parent container
bindsym $mod+a focus parent
# move the currently focused window to the scratchpad
bindsym $mod+Shift+minus move scratchpad
# Show the next scratchpad window or hide the focused scratchpad window.
# If there are multiple scratchpad windows, this command cycles through them.
bindsym $mod+minus scratchpad show
#navigate workspaces next / previous
bindsym $mod+Ctrl+Right workspace next
bindsym $mod+Ctrl+Left workspace prev
# Workspace names
# to display names or symbols instead of plain workspace numbers you can use
# something like: set $ws1 1:mail
# set $ws2 2:
set $ws1 1: I  : Internet
set $ws2 2: II  : Chat
set $ws3 3: III  : Terminal
set $ws4 4: IV  : Code
set $ws5 5: V  : Games
set $ws6 6: VI  : Wu
set $ws7 7: VII  : VB
set $ws8 8: VIII  : Downloads
set $ws9 9: IX  : Other
# switch to workspace
bindsym $mod+1 workspace $ws1
bindsym $mod+2 workspace $ws2
bindsym $mod+3 workspace $ws3
bindsym $mod+4 workspace $ws4
bindsym $mod+5 workspace $ws5
bindsym $mod+6 workspace $ws6
bindsym $mod+7 workspace $ws7
bindsym $mod+8 workspace $ws8
bindsym $mod+9 workspace $ws9
# Move focused container to workspace
bindsym $mod+Ctrl+1 move container to workspace $ws1
bindsym $mod+Ctrl+2 move container to workspace $ws2
bindsym $mod+Ctrl+3 move container to workspace $ws3
bindsym $mod+Ctrl+4 move container to workspace $ws4
bindsym $mod+Ctrl+5 move container to workspace $ws5
bindsym $mod+Ctrl+6 move container to workspace $ws6
bindsym $mod+Ctrl+7 move container to workspace $ws7
bindsym $mod+Ctrl+8 move container to workspace $ws8
bindsym $mod+Ctrl+9 move container to workspace $ws9
# Move to workspace with focused container
bindsym $mod+Shift+1 move container to workspace $ws1; workspace $ws1
bindsym $mod+Shift+2 move container to workspace $ws2; workspace $ws2
bindsym $mod+Shift+3 move container to workspace $ws3; workspace $ws3
bindsym $mod+Shift+4 move container to workspace $ws4; workspace $ws4
bindsym $mod+Shift+5 move container to workspace $ws5; workspace $ws5
bindsym $mod+Shift+6 move container to workspace $ws6; workspace $ws6
bindsym $mod+Shift+7 move container to workspace $ws7; workspace $ws7
bindsym $mod+Shift+8 move container to workspace $ws8; workspace $ws8
# Open applications on specific workspaces
assign [class="Netbeans"] $ws4
assign [class="intellij-idea-ultimate-edition"] $ws4
assign [class="Firefox"] $ws1
assign [class="telegram-desktop"] $ws2
assign [class="xfce4-terminal"] $ws3
assign [class="Pcmanfm"] $ws3
assign [class="Atom"] $ws4
assign [class="VirtualBox"] $ws7
assign [class="transmission-gtk"] $ws8
assign [class="Terraria.bin.x86"] $ws5
assign [class="Skype"] $ws2
# Open specific applications in floating mode
for_window [title="alsamixer"] floating enable border pixel 1
for_window [class="Calamares"] floating enable border normal
for_window [class="Clipgrab"] floating enable
for_window [title="File Transfer*"] floating enable
for_window [class="Galculator"] floating enable border pixel 1
for_window [class="GParted"] floating enable border normal
for_window [title="i3_help"] floating enable sticky enable border normal
for_window [class="Lightdm-gtk-greeter-settings"] floating enable
for_window [class="Lxappearance"] floating enable sticky enable border normal
for_window [class="Manjaro Settings Manager"] floating enable border normal
for_window [class="Manjaro Welcome"] floating enable
for_window [title="MuseScore: Play Panel"] floating enable
for_window [class="Nitrogen"] floating enable sticky enable border normal
for_window [class="Oblogout"] fullscreen enable
for_window [class="octopi"] floating enable
for_window [class="Pamac-manager"] floating enable
for_window [class="Pavucontrol"] floating enable
for_window [class="qt5ct"] floating enable sticky enable border normal
for_window [class="Qtconfig-qt4"] floating enable sticky enable border normal
for_window [class="Simple-scan"] floating enable border normal
for_window [class="(?i)System-config-printer.py"] floating enable border normal
for_window [class="Skype"] floating enable border normal
for_window [class="Thus"] floating enable border normal
for_window [class="Timeset-gui"] floating enable border normal
for_window [class="(?i)virtualbox"] floating enable border normal
for_window [class="Xfburn"] floating enable
for_window [class="transmission-gtk"] floating enable border normal
for_window [class="speedcrunch"] floating enable border normal
for_window [class="Speedcrunch"] floating enable border normal
# switch to workspace with urgent window automatically
for_window [urgent=latest] focus
# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
# Set shut down, restart and locking features
bindsym $mod+0 mode "$mode_system"
set $mode_system (l)ock, (e)xit, switch_(u)ser, (s)uspend, (h)ibernate, (r)eboot, (Shift+s)hutdown
mode "$mode_system" {
bindsym l exec --no-startup-id i3exit lock, mode "default"
bindsym s exec --no-startup-id i3exit suspend, mode "default"
bindsym u exec --no-startup-id i3exit switch_user, mode "default"
bindsym e exec --no-startup-id i3exit logout, mode "default"
bindsym h exec --no-startup-id i3exit hibernate, mode "default"
bindsym r exec --no-startup-id i3exit reboot, mode "default"
bindsym Shift+s exec --no-startup-id i3exit shutdown, mode "default"
# exit system mode: "Enter" or "Escape"
bindsym Return mode "default"
bindsym Escape mode "default"
}
# Resize window (you can also use the mouse for that)
bindsym $mod+r mode "resize"
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window’s width.
# Pressing right will grow the window’s width.
# Pressing up will shrink the window’s height.
# Pressing down will grow the window’s height.
bindsym j resize shrink width 5 px or 5 ppt
bindsym k resize grow height 5 px or 5 ppt
bindsym l resize shrink height 5 px or 5 ppt
bindsym odiaeresis resize grow width 5 px or 5 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 10 px or 10 ppt
bindsym Down resize grow height 10 px or 10 ppt
bindsym Up resize shrink height 10 px or 10 ppt
bindsym Right resize grow width 10 px or 10 ppt
# exit resize mode: Enter or Escape
bindsym Return mode "default"
bindsym Escape mode "default"
}
# Lock screen
bindsym $mod+Shift+w exec --no-startup-id i3lock -i /home/camilo/Imágenes/lock.png
# Autostart applications
## adjustment of i3bar battery reading (only run at the very first login):
#exec --no-startup-id /usr/bin/adjust_i3statusconf
exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
exec --no-startup-id nitrogen --restore; sleep 1; compton -b
exec --no-startup-id nm-applet
exec --no-startup-id xfce4-power-manager
exec --no-startup-id pamac-tray
exec --no-startup-id clipit
exec --no-startup-id blueman
# exec_always --no-startup-id sbxkb
# exec --no-startup-id start_conky_maia
# exec --no-startup-id start_conky_green
# exec --no-startup-id conky
# exec telegram-desktop
exec --no-startup-id xautolock -time 10 -locker i3lock -i /home/camilo/Imágenes/lock.png
exec_always --no-startup-id setcursor
# Start i3bar to display a workspace bar (plus the system information i3status if available)
bar {
status_command i3status
## please set your primary output first. Example: 'xrandr --output eDP1 --primary'
# tray_output primary
# tray_output eDP1
bindsym button4 nop
bindsym button5 nop
#font xft:Ubuntu,Icons 10.5
font pango:Font Awesome, Icons 10.5
strip_workspace_numbers yes
colors {
# background $transparent
# background #2B2C2B
# statusline #F9FAF9
separator #454947
background $background
statusline $primary
# border backgr. text
# focused_workspace #F9FAF9 #16A085 #2B2C2B
# active_workspace #595B5B #353836 #FDF6E3
# inactive_workspace #595B5B #353836 #EEE8D5
# urgent_workspace #16A085 #FDF6E3 #E5201D
focused_workspace $secondary $background $foreground
active_workspace $primary $background $foreground
inactive_workspace $primary $background $foreground
urgent_workspace $foreground $warning
}
}
# hide/unhide i3status bar
bindsym $mod+m bar mode toggle
# Theme colors
# class border backgr. text indic. child_border
#client.focused #808280 #808280 #80FFF9 #FDF6E3
#client.focused_inactive #434745 #434745 #16A085 #454948
#client.unfocused #434745 #434745 #16A085 #454948
#client.urgent #CB4B16 #FDF6E3 #16A085 #268BD2
#client.placeholder #000000 #0c0c0c #ffffff #000000 #0c0c0c
client.focused $primary $primary $background $primary
client.focused_inactive $background $primary $foreground $background
client.unfocused $gray $gray $background $secondary
client.urgent $warning $warning $foreground $warning
#client.background #2B2C2B
client.background $background
#############################
### settings for i3-gaps: ###
#############################
# Set inner/outer gaps
gaps inner 5
gaps outer -4
# Additionally, you can issue commands with the following syntax. This is useful to bind keys to changing the gap size.
# gaps inner|outer current|all set|plus|minus <px>
# gaps inner all set 10
# gaps outer all plus 5
# Smart gaps (gaps used if only more than one container on the workspace)
smart_gaps on
# Smart borders (draw borders around container only if it is not the only container on this workspace)
# on|no_gaps (on=always activate and no_gaps=only activate if the gap size to the edge of the screen is 0)
smart_borders on
# Press $mod+Shift+g to enter the gap mode. Choose o or i for modifying outer/inner gaps. Press one of + / - (in-/decrement for current workspace) or 0 (remove gaps for current workspace). If you also press Shift with these keys, the change will be global for all workspaces.
set $mode_gaps Gaps: (o) outer, (i) inner
set $mode_gaps_outer Outer Gaps: +|-|0 (local), Shift + +|-|0 (global)
set $mode_gaps_inner Inner Gaps: +|-|0 (local), Shift + +|-|0 (global)
bindsym $mod+Shift+g mode "$mode_gaps"
mode "$mode_gaps" {
bindsym o mode "$mode_gaps_outer"
bindsym i mode "$mode_gaps_inner"
bindsym Return mode "default"
bindsym Escape mode "default"
}
mode "$mode_gaps_inner" {
bindsym plus gaps inner current plus 5
bindsym minus gaps inner current minus 5
bindsym 0 gaps inner current set 0
bindsym Shift+plus gaps inner all plus 5
bindsym Shift+minus gaps inner all minus 5
bindsym Shift+0 gaps inner all set 0
bindsym Return mode "default"
bindsym Escape mode "default"
}
mode "$mode_gaps_outer" {
bindsym plus gaps outer current plus 5
bindsym minus gaps outer current minus 5
bindsym 0 gaps outer current set 0
bindsym Shift+plus gaps outer all plus 5
bindsym Shift+minus gaps outer all minus 5
bindsym Shift+0 gaps outer all set 0
bindsym Return mode "default"
bindsym Escape mode "default"
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.