Settings for MakerbotReplicatorDual on Cura

MakerbotReplicatorDualForCura

{
    "version": 2,
    "name": "My Custom",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "Ultimaker",
        "manufacturer": "Custom",
        "category": "Custom",
        "file_formats": "text/x-gcode",
        "has_materials": true,
        "machine_x3g_variant": "r1d",
        "machine_extruder_trains":
        {
            "0": "custom_extruder_1",
            "1": "custom_extruder_2",
            "2": "custom_extruder_3",
            "3": "custom_extruder_4",
            "4": "custom_extruder_5",
            "5": "custom_extruder_6",
            "6": "custom_extruder_7",
            "7": "custom_extruder_8"
        },
        "first_start_actions": ["MachineSettingsAction"]
    }
}


[general]
version = 4
name = My Custom_settings
definition = myr1d

[metadata]
type = definition_changes
setting_version = 5

[values]
extruders_enabled_count = 2
machine_depth = 150
machine_extruder_count = 2
machine_heated_bed = True
machine_height = 150
machine_start_gcode = M136
	M73 P0
	G162 X Y F2000(home XY axes maximum)
	G161 Z F900(home Z axis minimum)
	G92 X0 Y0 Z-5 A0 B0 (set Z to -5)
	G1 Z0.0 F900(move Z to '0')
	G161 Z F100(home Z axis minimum)
	M132 X Y Z A B (Recall stored home offsets for XYZAB axis)
	G92 X265 Y152 Z0 A0 B0
	G1 X0 Y0 Z50 F3600
	G130 X20 Y20 A20 B20 (Lower stepper Vrefs while heating)
	M140 S{material_bed_temperature_layer_0}
	M104 S{material_print_temperature_layer_0,0} T0
	M104 S{material_print_temperature_layer_0,1} T1
	M134
	M133 T1
	M133 T0
	G130 X127 Y127 A127 B127 (Set Stepper motor Vref to defaults)
	G0 X0 Y4 Z0.3 F2400
	G1 X230 A18 F2400
	G1 X230 Y5 F2400
	G1 X35 B0 F2400
	G92 A0 B0
	G1 X35 F2400
	G1 X45 F2400
	
machine_width = 230