I've graduate from a gist to a full repo. See https://github.com/ccutrer/balboa_worldwide_app, especially https://github.com/ccutrer/balboa_worldwide_app/blob/master/doc/protocol.md
-
-
Save ccutrer/ba945ac2ff9508d9e151556b572f2503 to your computer and use it in GitHub Desktop.
Any sucess ?
Wondering if anything developed on the direct wired connection bypassing the wifi module - any success?
I managed to interface a Pi directly to the controller : you need a RS-485 module and a Micro Fit ATX cable for the connection. My code and research (see README) is here : https://github.com/rsrawley/spaControl. I use Node.js as a backend server. Took me a while to figure it all out, so hopefully this helps someone out !
Thank you @rsrawley. Will look into the details of your project when I have the time.
As I just got my Spa with a Balboa BP2100G0 with a TP600 UI, I'll order the components to build a mqtt bridge with esp8266 + RS485 Transceiver.
Be prepared for me to ask questions ;-)
I'll then link my repo here.
As I just got my Spa with a Balboa BP2100G0 with a TP600 UI, I'll order the components to build a mqtt bridge with esp8266 + RS485 Transceiver.
Be prepared for me to ask questions ;-)
I'll then link my repo here.
Any update on this? I have mine down right now to replace motor, so very interested in getting it added to my Home Assistant.
Yep, working really fine ;-)
https://github.com/cribskip/esp8266_spa
Hey guy! A Perfect Solution!! Worked like a charm and i translated it to php. I have just one question perhaps you know and would be great! If i want to toggle pump3 i dont know which hex to use for it. I tryed 0600 and 95 CB as Logical sequence but that is not working.
Hi swissboy - would you mind sharing your php solution?
@kgerlich Did you get anywhere with this? I’m about doing the same.