Created
November 15, 2014 23:02
-
-
Save cernekee/e53a6ff05292c3a78a94 to your computer and use it in GitHub Desktop.
Multiplatform BMIPS kernel - boot logs
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #11 SMP Sat Nov 15 14:35:05 PST 2014 | |
CPU0 revision is: 0002a080 (Broadcom BMIPS4350) | |
MIPS: machine is Broadcom BCM93384WVG-viper | |
Determined physical RAM map: | |
memory: 02000000 @ 06000000 (usable) | |
memory: 02000000 @ 0e000000 (usable) | |
bootconsole [uart0] enabled | |
User-defined physical RAM map: | |
memory: 02000000 @ 06000000 (usable) | |
memory: 02000000 @ 0e000000 (usable) | |
Wasting 786432 bytes for tracking 24576 unused pages | |
Initrd not found or empty - disabling initrd | |
Zone ranges: | |
Normal [mem 0x06000000-0x0fffffff] | |
HighMem empty | |
Movable zone start for each node | |
Early memory node ranges | |
node 0: [mem 0x06000000-0x07ffffff] | |
node 0: [mem 0x0e000000-0x0fffffff] | |
Initmem setup node 0 [mem 0x06000000-0x0fffffff] | |
Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. | |
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes | |
PERCPU: Embedded 7 pages/cpu @868ab000 s6912 r0 d21760 u32768 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16064 | |
Kernel command line: ubi.mtd=linuxkfs ubi.mtd=linuxapps root=ubi0:rootfs ro noinitrd rootfstype=ubifs console=ttyS0,115200 mem=0x02000000@0x06000000 mem=0x02000000@0x0e000000 earlycon | |
PID hash table entries: 256 (order: -2, 1024 bytes) | |
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) | |
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) | |
Memory: 56584K/65536K available (5018K kernel code, 182K rwdata, 684K rodata, 1336K init, 256K bss, 8952K reserved, 0K highmem) | |
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
Hierarchical RCU implementation. | |
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. | |
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 | |
NR_IRQS:128 | |
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb4e00048, parent IRQ(s): 1) | |
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb51f8048, parent IRQ(s): 1) | |
Calibrating delay loop... 599.04 BogoMIPS (lpj=1198080) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
Brought up 1 CPUs | |
devtmpfs: initialized | |
NET: Registered protocol family 16 | |
SCSI subsystem initialized | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
cfg80211: Calling CRDA to update world regulatory domain | |
Switched to clocksource MIPS | |
NET: Registered protocol family 2 | |
TCP established hash table entries: 1024 (order: 0, 4096 bytes) | |
TCP bind hash table entries: 1024 (order: 1, 8192 bytes) | |
TCP: Hash tables configured (established 1024 bind 1024) | |
TCP: reno registered | |
UDP hash table entries: 256 (order: 1, 8192 bytes) | |
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
NET: Registered protocol family 1 | |
RPC: Registered named UNIX socket transport module. | |
RPC: Registered udp transport module. | |
RPC: Registered tcp transport module. | |
RPC: Registered tcp NFSv4.1 backchannel transport module. | |
futex hash table entries: 256 (order: 3, 32768 bytes) | |
fuse init (API version 7.23) | |
io scheduler noop registered (default) | |
bcm63xx_uart 14e00520.serial: ttyS0 at MMIO 0x14e00520 (irq = 8, base_baud = 1687500) is a bcm63xx_uart | |
console [ttyS0] enabled | |
console [ttyS0] enabled | |
bootconsole [uart0] disabled | |
bootconsole [uart0] disabled | |
libphy: Fixed MDIO Bus: probed | |
usbcore: registered new interface driver asix | |
usbcore: registered new interface driver ax88179_178a | |
usbcore: registered new interface driver cdc_ether | |
usbcore: registered new interface driver net1080 | |
usbcore: registered new interface driver cdc_subset | |
usbcore: registered new interface driver zaurus | |
usbcore: registered new interface driver cdc_ncm | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
ehci-platform: EHCI generic platform driver | |
ehci-platform 15400300.usb: EHCI Host Controller | |
ehci-platform 15400300.usb: new USB bus registered, assigned bus number 1 | |
ehci-platform 15400300.usb: irq 41, io mem 0x15400300 | |
ehci-platform 15400300.usb: USB 2.0 started, EHCI 1.00 | |
hub 1-0:1.0: USB hub found | |
hub 1-0:1.0: 2 ports detected | |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
ohci-platform: OHCI generic platform driver | |
ohci-platform 15400400.usb: Generic Platform OHCI controller | |
ohci-platform 15400400.usb: new USB bus registered, assigned bus number 2 | |
ohci-platform 15400400.usb: irq 40, io mem 0x15400400 | |
hub 2-0:1.0: USB hub found | |
hub 2-0:1.0: 2 ports detected | |
usbcore: registered new interface driver usb-storage | |
TCP: cubic registered | |
NET: Registered protocol family 10 | |
sit: IPv6 over IPv4 tunneling driver | |
NET: Registered protocol family 17 | |
Freeing unused kernel memory: 1336K (865d2000 - 86720000) | |
starting pid 758, tty '': '/etc/init.d/rcS' | |
Mounting virtual filesystems | |
usb 1-1: new high-speed USB device number 2 using ehci-platform | |
Starting mdev | |
usb-storage 1-1:1.0: USB Mass Storage device detected | |
scsi host0: usb-storage 1-1:1.0 | |
scsi 0:0:0:0: Direct-Access Kingston DataTraveler 112 1.00 PQ: 0 ANSI: 2 | |
sd 0:0:0:0: [sda] 15636304 512-byte logical blocks: (8.00 GB/7.45 GiB) | |
sd 0:0:0:0: [sda] Write Protect is off | |
sd 0:0:0:0: [sda] No Caching mode page found | |
sd 0:0:0:0: [sda] Assuming drive cache: write through | |
sda: sda1 | |
sd 0:0:0:0: [sda] Attached SCSI removable disk | |
Configuring lo interface | |
Configuring sit0 interface | |
Starting network services | |
starting pid 864, tty '': '/bin/cttyhack /bin/sh -l' | |
root@bmips# cat /proc/iomem | |
06000000-07ffffff : System RAM | |
06010000-064f68e7 : Kernel code | |
064f68e8-065d13ff : Kernel data | |
0e000000-0fffffff : System RAM | |
14e00520-14e00537 : /serial@14e00520 | |
15400300-154003ff : /usb@15400300 | |
15400400-154004ff : /usb@15400400 | |
root@bmips# cat /proc/meminfo | |
MemTotal: 57920 kB | |
MemFree: 46844 kB | |
MemAvailable: 50012 kB | |
Buffers: 0 kB | |
Cached: 4820 kB | |
SwapCached: 0 kB | |
Active: 4528 kB | |
Inactive: 824 kB | |
Active(anon): 532 kB | |
Inactive(anon): 4 kB | |
Active(file): 3996 kB | |
Inactive(file): 820 kB | |
Unevictable: 0 kB | |
Mlocked: 0 kB | |
HighTotal: 0 kB | |
HighFree: 0 kB | |
LowTotal: 57920 kB | |
LowFree: 46844 kB | |
SwapTotal: 0 kB | |
SwapFree: 0 kB | |
Dirty: 0 kB | |
Writeback: 0 kB | |
AnonPages: 548 kB | |
Mapped: 1812 kB | |
Shmem: 4 kB | |
Slab: 5128 kB | |
SReclaimable: 1952 kB | |
SUnreclaim: 3176 kB | |
KernelStack: 288 kB | |
PageTables: 84 kB | |
NFS_Unstable: 0 kB | |
Bounce: 0 kB | |
WritebackTmp: 0 kB | |
CommitLimit: 28960 kB | |
Committed_AS: 1624 kB | |
VmallocTotal: 1015800 kB | |
VmallocUsed: 24 kB | |
VmallocChunk: 1014704 kB | |
root@bmips# cat /proc/cpuinfo | |
system type : BMIPS multiplatform kernel | |
machine : Broadcom BCM93384WVG-viper | |
processor : 0 | |
cpu model : Broadcom BMIPS4350 V8.0 | |
BogoMIPS : 599.04 | |
wait instruction : yes | |
microsecond timers : yes | |
tlb_entries : 32 | |
extra interrupt vector : yes | |
hardware watchpoint : no | |
isa : mips1 mips2 mips32r1 | |
ASEs implemented : mips16 | |
shadow register sets : 1 | |
kscratch registers : 0 | |
package : 0 | |
core : 0 | |
VCED exceptions : not available | |
VCEI exceptions : not available | |
root@bmips# cat /proc/version | |
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #11 SMP Sat Nov 15 14:35:05 PST 2014 | |
root@bmips# cat /proc/interrupts | |
CPU0 | |
0: 0 MIPS 0 smp_ipi0 | |
1: 0 MIPS 1 smp_ipi1 | |
7: 1344 MIPS 7 timer | |
8: 510 /periph_intc@14e00048 2 bcm63xx_uart | |
40: 1 /periph_intc@14e00048 40 ohci_hcd:usb2 | |
41: 93 /periph_intc@14e00048 41 ehci_hcd:usb1 | |
ERR: 0 | |
root@bmips# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #4 SMP Sat Nov 15 13:36:09 PST 2014 | |
CPU0 revision is: 00025a11 (Broadcom BMIPS5000) | |
FPU revision is: 00130001 | |
MIPS: machine is Broadcom BCM93384WVG | |
Determined physical RAM map: | |
memory: 08000000 @ 00000000 (usable) | |
memory: 10000000 @ 20000000 (usable) | |
bootconsole [uart0] enabled | |
Initrd not found or empty - disabling initrd | |
Zone ranges: | |
Normal [mem 0x00000000-0x1fffffff] | |
HighMem [mem 0x20000000-0x2fffffff] | |
Movable zone start for each node | |
Early memory node ranges | |
node 0: [mem 0x00000000-0x07ffffff] | |
node 0: [mem 0x20000000-0x2fffffff] | |
Initmem setup node 0 [mem 0x00000000-0x2fffffff] | |
Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes. | |
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | |
MIPS secondary cache 256kB, 8-way, linesize 128 bytes. | |
PERCPU: Embedded 7 pages/cpu @8160a000 s5632 r0 d23040 u32768 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97280 | |
Kernel command line: ubi.mtd=linuxkfs ubi.mtd=linuxapps root=ubi0:rootfs ro noinitrd rootfstype=ubifs console=ttyS0,115200 earlycon | |
PID hash table entries: 512 (order: -1, 2048 bytes) | |
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
Memory: 381788K/393216K available (2978K kernel code, 136K rwdata, 412K rodata, 1264K init, 214K bss, 11428K reserved, 262144K highmem) | |
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
Hierarchical RCU implementation. | |
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
NR_IRQS:128 | |
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb4e00038, parent IRQ(s): 1) | |
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb4e00058, parent IRQ(s): 1) | |
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb04b0060, parent IRQ(s): 1) | |
Calibrating delay loop... 531.45 BogoMIPS (lpj=1062912) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
SMP: Booting CPU1... | |
CPU1 revision is: 00025a11 (Broadcom BMIPS5000) | |
FPU revision is: 00130001 | |
Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes. | |
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | |
MIPS secondary cache 256kB, 8-way, linesize 128 bytes. | |
Synchronize counters for CPU 1: done. | |
SMP: CPU1 is running | |
Brought up 2 CPUs | |
devtmpfs: initialized | |
SCSI subsystem initialized | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
Switched to clocksource MIPS | |
futex hash table entries: 512 (order: 4, 65536 bytes) | |
fuse init (API version 7.23) | |
bounce: pool size: 64 pages | |
io scheduler noop registered (default) | |
bcm63xx_uart 14e00520.serial: ttyS0 at MMIO 0x14e00520 (irq = 8, base_baud = 168z��k����[ttyS0] enabled | |
console [ttyS0] enabled | |
bootconsole [uart0] disabled | |
bootconsole [uart0] disabled | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
ehci-platform: EHCI generic platform driver | |
ehci-platform 15400300.usb: EHCI Host Controller | |
ehci-platform 15400300.usb: new USB bus registered, assigned bus number 1 | |
ehci-platform 15400300.usb: irq 41, io mem 0x15400300 | |
ehci-platform 15400300.usb: USB 2.0 started, EHCI 1.00 | |
hub 1-0:1.0: USB hub found | |
hub 1-0:1.0: 2 ports detected | |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
ohci-platform: OHCI generic platform driver | |
ohci-platform 15400400.usb: Generic Platform OHCI controller | |
ohci-platform 15400400.usb: new USB bus registered, assigned bus number 2 | |
ohci-platform 15400400.usb: irq 40, io mem 0x15400400 | |
hub 2-0:1.0: USB hub found | |
hub 2-0:1.0: 2 ports detected | |
usbcore: registered new interface driver usb-storage | |
Freeing unused kernel memory: 1264K (80384000 - 804c0000) | |
starting pid 708, tty '': '/etc/init.d/rcS' | |
Mounting virtual filesystems | |
Starting mdev | |
usb 1-1: new high-speed USB device number 2 using ehci-platform | |
usb-storage 1-1:1.0: USB Mass Storage device detected | |
scsi host0: usb-storage 1-1:1.0 | |
ls: /sys/class/net: No such file or directory | |
Starting network services | |
starting pid 747, tty '': '/bin/cttyhack /bin/sh -l' | |
root@bmips# scsi 0:0:0:0: Direct-Access Kingston DataTraveler 112 1.00 PQ: 0 ANSI: 2 | |
sd 0:0:0:0: [sda] 15636304 512-byte logical blocks: (8.00 GB/7.45 GiB) | |
sd 0:0:0:0: [sda] Write Protect is off | |
sd 0:0:0:0: [sda] No Caching mode page found | |
sd 0:0:0:0: [sda] Assuming drive cache: write through | |
sda: sda1 | |
sd 0:0:0:0: [sda] Attached SCSI removable disk | |
root@bmips# cat /proc/iomem | |
00000000-07ffffff : System RAM | |
00010000-002f886f : Kernel code | |
002f8870-0038343f : Kernel data | |
14e00520-14e00537 : /serial@14e00520 | |
15400300-154003ff : /usb@15400300 | |
15400400-154004ff : /usb@15400400 | |
root@bmips# cat /proc/meminfo | |
MemTotal: 383052 kB | |
MemFree: 371332 kB | |
MemAvailable: 371836 kB | |
Buffers: 0 kB | |
Cached: 4816 kB | |
SwapCached: 0 kB | |
Active: 4212 kB | |
Inactive: 840 kB | |
Active(anon): 236 kB | |
Inactive(anon): 0 kB | |
Active(file): 3976 kB | |
Inactive(file): 840 kB | |
Unevictable: 0 kB | |
Mlocked: 0 kB | |
HighTotal: 262144 kB | |
HighFree: 256444 kB | |
LowTotal: 120908 kB | |
LowFree: 114888 kB | |
SwapTotal: 0 kB | |
SwapFree: 0 kB | |
Dirty: 0 kB | |
Writeback: 0 kB | |
AnonPages: 288 kB | |
Mapped: 1664 kB | |
Shmem: 0 kB | |
Slab: 5080 kB | |
SReclaimable: 1908 kB | |
SUnreclaim: 3172 kB | |
KernelStack: 272 kB | |
PageTables: 28 kB | |
NFS_Unstable: 0 kB | |
Bounce: 0 kB | |
WritebackTmp: 0 kB | |
CommitLimit: 191524 kB | |
Committed_AS: 1220 kB | |
VmallocTotal: 1015800 kB | |
VmallocUsed: 16 kB | |
VmallocChunk: 1014748 kB | |
root@bmips# cat /proc/cpuinfo | |
system type : BMIPS multiplatform kernel | |
machine : Broadcom BCM93384WVG | |
processor : 0 | |
cpu model : Broadcom BMIPS5000 V1.1 FPU V0.1 | |
BogoMIPS : 531.45 | |
wait instruction : yes | |
microsecond timers : yes | |
tlb_entries : 64 | |
extra interrupt vector : yes | |
hardware watchpoint : no | |
isa : mips1 mips2 mips32r1 | |
ASEs implemented : | |
shadow register sets : 1 | |
kscratch registers : 0 | |
package : 0 | |
core : 0 | |
VCED exceptions : not available | |
VCEI exceptions : not available | |
processor : 1 | |
cpu model : Broadcom BMIPS5000 V1.1 FPU V0.1 | |
BogoMIPS : 400.38 | |
wait instruction : yes | |
microsecond timers : yes | |
tlb_entries : 64 | |
extra interrupt vector : yes | |
hardware watchpoint : no | |
isa : mips1 mips2 mips32r1 | |
ASEs implemented : | |
shadow register sets : 1 | |
kscratch registers : 0 | |
package : 0 | |
core : 0 | |
VCED exceptions : not available | |
VCEI exceptions : not available | |
root@bmips# cat /proc/version | |
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #4 SMP Sat Nov 15 13:36:09 PST 2014 | |
root@bmips# cat /proc/interrupts | |
CPU0 CPU1 | |
0: 157 753 MIPS 0 smp_ipi0 | |
1: 487 413 MIPS 1 smp_ipi1 | |
7: 509 314 MIPS 7 timer | |
8: 649 0 /periph_intc@14e00038 2 bcm63xx_uart | |
40: 1 0 /periph_intc@14e00038 40 ohci_hcd:usb2 | |
41: 89 0 /periph_intc@14e00038 41 ehci_hcd:usb1 | |
ERR: 0 | |
root@bmips# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
CFE version 1.0.37-106.17 for BCM96328 (32bit,SP,BE) | |
Build Date: Sun Jul 29 10:28:41 PDT 2012 (build@ubuntu) | |
Copyright (C) 2000-2009 Broadcom Corporation. | |
HS Serial flash device: name S25FL128, id 0x0118 size 16384KB | |
Total Flash size: 16384K with 256 sectors | |
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz | |
Main Thread: TP0 | |
Memory Test Passed | |
Total Memory: 134217728 bytes (128MB) | |
Boot Address: 0xb8000000 | |
Board IP address : 192.168.1.1:ffffff00 | |
Host IP address : 192.168.1.2 | |
Gateway IP address : | |
Run from flash/host (f/h) : h | |
Default host run file name : vmlinux | |
Default host flash file name : bcm963xx_fs_kernel | |
Boot delay (0-9 seconds) : 1 | |
Boot image (0=latest, 1=previous) : 0 | |
Board Id (0-3) : 96328avng | |
Number of MAC Addresses (1-32) : 1 | |
Base MAC Address : 00:10:18:16:6e:42 | |
PSI Size (1-64) KBytes : 24 | |
Enable Backup PSI [0|1] : 0 | |
System Log Size (0-256) KBytes : 0 | |
Main Thread Number [0|1] : 0 | |
Voice Board Configuration (0-11) : LE88276 | |
*** Press any key to stop auto run (1 seconds) *** | |
Auto run second count down: 0 | |
0x80010000/4908544 0x804be600/226704 Entry at 0x802eead0 | |
Closing network. | |
Disabling Switch ports. | |
Flushing Receive Buffers... | |
0 buffers found. | |
Closing DMA Channels. | |
Starting program at 0x802eead0 | |
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #4 SMP Sat Nov 15 13:36:09 PST 2014 | |
CPU0 revision is: 0002a075 (Broadcom BMIPS4350) | |
MIPS: machine is Broadcom BCM9EJTAGPRB | |
Determined physical RAM map: | |
memory: 08000000 @ 00000000 (usable) | |
bootconsole [uart0] enabled | |
Initrd not found or empty - disabling initrd | |
Zone ranges: | |
Normal [mem 0x00000000-0x07ffffff] | |
HighMem empty | |
Movable zone start for each node | |
Early memory node ranges | |
node 0: [mem 0x00000000-0x07ffffff] | |
Initmem setup node 0 [mem 0x00000000-0x07ffffff] | |
Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes. | |
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes | |
PERCPU: Embedded 7 pages/cpu @81107000 s5632 r0 d23040 u32768 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 | |
Kernel command line: console=ttyS0,115200 earlycon | |
PID hash table entries: 512 (order: -1, 2048 bytes) | |
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
Memory: 124808K/131072K available (2978K kernel code, 136K rwdata, 412K rodata, 1264K init, 214K bss, 6264K reserved, 0K highmem) | |
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
Hierarchical RCU implementation. | |
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. | |
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 | |
NR_IRQS:128 | |
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb0000024, parent IRQ(s): 1) | |
Calibrating delay loop... 318.46 BogoMIPS (lpj=636928) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
Brought up 1 CPUs | |
devtmpfs: initialized | |
SCSI subsystem initialized | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
Switched to clocksource MIPS | |
futex hash table entries: 256 (order: 3, 32768 bytes) | |
fuse init (API version 7.23) | |
io scheduler noop registered (default) | |
bcm63xx_uart 10000100.serial: ttyS0 at MMIO 0x10000100 (irq = 28, base_baud = 1562500) is a bcm63xx_uart | |
console [ttyS0] enabled | |
console [ttyS0] enabled | |
bootconsole [uart0] disabled | |
bootconsole [uart0] disabled | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
ehci-platform: EHCI generic platform driver | |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
ohci-platform: OHCI generic platform driver | |
usbcore: registered new interface driver usb-storage | |
Freeing unused kernel memory: 1264K (80384000 - 804c0000) | |
starting pid 663, tty '': '/etc/init.d/rcS' | |
Mounting virtual filesystems | |
Starting mdev | |
ls: /sys/class/net: No such file or directory | |
Starting network services | |
starting pid 715, tty '': '/bin/cttyhack /bin/sh -l' | |
root@bmips# cat /proc/iomem | |
00000000-07ffffff : System RAM | |
00010000-002f886f : Kernel code | |
002f8870-0038343f : Kernel data | |
10000100-10000117 : /serial@10000100 | |
root@bmips# cat /proc/meminfo | |
MemTotal: 126072 kB | |
MemFree: 116976 kB | |
MemAvailable: 115960 kB | |
Buffers: 0 kB | |
Cached: 4072 kB | |
SwapCached: 0 kB | |
Active: 4228 kB | |
Inactive: 172 kB | |
Active(anon): 4228 kB | |
Inactive(anon): 172 kB | |
Active(file): 0 kB | |
Inactive(file): 0 kB | |
Unevictable: 0 kB | |
Mlocked: 0 kB | |
HighTotal: 0 kB | |
HighFree: 0 kB | |
LowTotal: 126072 kB | |
LowFree: 116976 kB | |
SwapTotal: 0 kB | |
SwapFree: 0 kB | |
Dirty: 0 kB | |
Writeback: 0 kB | |
AnonPages: 344 kB | |
Mapped: 1692 kB | |
Shmem: 4072 kB | |
Slab: 4288 kB | |
SReclaimable: 1752 kB | |
SUnreclaim: 2536 kB | |
KernelStack: 168 kB | |
PageTables: 44 kB | |
NFS_Unstable: 0 kB | |
Bounce: 0 kB | |
WritebackTmp: 0 kB | |
CommitLimit: 63036 kB | |
Committed_AS: 4880 kB | |
VmallocTotal: 1015800 kB | |
VmallocUsed: 16 kB | |
VmallocChunk: 1014748 kB | |
root@bmips# cat /proc/cpuinfo | |
system type : BMIPS multiplatform kernel | |
machine : Broadcom BCM9EJTAGPRB | |
processor : 0 | |
cpu model : Broadcom BMIPS4350 V7.5 | |
BogoMIPS : 318.46 | |
wait instruction : yes | |
microsecond timers : yes | |
tlb_entries : 32 | |
extra interrupt vector : yes | |
hardware watchpoint : no | |
isa : mips1 mips2 mips32r1 | |
ASEs implemented : mips16 | |
shadow register sets : 1 | |
kscratch registers : 0 | |
package : 0 | |
core : 0 | |
VCED exceptions : not available | |
VCEI exceptions : not available | |
root@bmips# cat /proc/version | |
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #4 SMP Sat Nov 15 13:36:09 PST 2014 | |
root@bmips# cat /proc/interrupts | |
CPU0 | |
0: 0 MIPS 0 smp_ipi0 | |
1: 0 MIPS 1 smp_ipi1 | |
7: 1224 MIPS 7 timer | |
28: 586 /periph_intc@10000024 28 bcm63xx_uart | |
ERR: 0 | |
root@bmips# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
CFE version 1.0.37-110.11 for BCM96368 (32bit,SP,BE) | |
Build Date: Fri Mar 11 15:51:05 PST 2011 (dsl@dsl-desktop) | |
Copyright (C) 2000-2009 Broadcom Corporation. | |
Parallel flash device: name AM29LV320MT, id 0x2201 size 8192KB | |
Total Flash size: 8192K with 135 sectors | |
Chip ID: BCM6368B2, MIPS: 400MHz | |
Main Thread: TP0 | |
Total Memory: 67108864 bytes (64MB) | |
Boot Address: 0xb8000000 | |
Board IP address : 10.13.134.59:fffffe00 | |
Host IP address : 10.12.156.101 | |
Gateway IP address : 10.13.134.1 | |
Run from flash/host (f/h) : h | |
Default host run file name : vmlinux | |
Default host flash file name : bcm963xx_fs_kernel | |
Boot delay (0-9 seconds) : 1 | |
Board Id (0-15) : 96368MVWG | |
Number of MAC Addresses (1-32) : 10 | |
Base MAC Address : 02:10:18:12:01:01 | |
PSI Size (1-64) KBytes : 24 | |
Enable Backup PSI [0|1] : 0 | |
System Log Size (0-256) KBytes : 0 | |
Main Thread Number [0|1] : 0 | |
Voice Board Configuration (0-0) : | |
*** Press any key to stop auto run (1 seconds) *** | |
Auto run second count down: 0 | |
0x80010000/4908544 0x804be600/226704 Entry at 0x802eead0 | |
Closing network. | |
Disabling Switch ports. | |
Flushing Receive Buffers... | |
0 buffers found. | |
Closing DMA Channels. | |
Starting program at 0x802eead0 | |
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #4 SMP Sat Nov 15 13:36:09 PST 2014 | |
CPU0 revision is: 0002a031 (Broadcom BMIPS4350) | |
MIPS: machine is Broadcom BCM96368MVWG | |
Determined physical RAM map: | |
memory: 04000000 @ 00000000 (usable) | |
bootconsole [uart0] enabled | |
Initrd not found or empty - disabling initrd | |
Zone ranges: | |
Normal [mem 0x00000000-0x03ffffff] | |
HighMem empty | |
Movable zone start for each node | |
Early memory node ranges | |
node 0: [mem 0x00000000-0x03ffffff] | |
Initmem setup node 0 [mem 0x00000000-0x03ffffff] | |
Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. | |
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes | |
PERCPU: Embedded 7 pages/cpu @81087000 s5632 r0 d23040 u32768 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 | |
Kernel command line: console=ttyS0,115200 earlycon | |
PID hash table entries: 256 (order: -2, 1024 bytes) | |
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) | |
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) | |
Memory: 59800K/65536K available (2978K kernel code, 136K rwdata, 412K rodata, 1264K init, 214K bss, 5736K reserved, 0K highmem) | |
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
Hierarchical RCU implementation. | |
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
NR_IRQS:128 | |
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb0000024, parent IRQ(s): 1) | |
Calibrating delay loop... 397.82 BogoMIPS (lpj=795648) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
SMP: Booting CPU1... | |
CPU1 revision is: 0002a031 (Broadcom BMIPS4350) | |
Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. | |
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes | |
Synchronize counters for CPU 1: | |
SMP: CPU1 is running | |
done. | |
Brought up 2 CPUs | |
devtmpfs: initialized | |
SCSI subsystem initialized | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
Switched to clocksource MIPS | |
futex hash table entries: 512 (order: 4, 65536 bytes) | |
fuse init (API version 7.23) | |
io scheduler noop registered (default) | |
bcm63xx_uart 10000100.serial: ttyS0 at MMIO 0x10000100 (irq = 8, base_baud = 1562500) is a bcm63xx_uart | |
console [ttyS0] enabled | |
console [ttyS0] enabled | |
bootconsole [uart0] disabled | |
bootconsole [uart0] disabled | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
ehci-platform: EHCI generic platform driver | |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
ohci-platform: OHCI generic platform driver | |
usbcore: registered new interface driver usb-storage | |
Freeing unused kernel memory: 1264K (80384000 - 804c0000) | |
starting pid 699, tty '': '/etc/init.d/rcS' | |
Mounting virtual filesystems | |
Starting mdev | |
ls: /sys/class/net: No such file or directory | |
Starting network services | |
starting pid 721, tty '': '/bin/cttyhack /bin/sh -l' | |
root@bmips# cat /proc/iomem | |
00000000-03ffffff : System RAM | |
00010000-002f886f : Kernel code | |
002f8870-0038343f : Kernel data | |
10000100-10000117 : /serial@10000100 | |
root@bmips# cat /proc/meminfo | |
MemTotal: 61064 kB | |
MemFree: 51456 kB | |
MemAvailable: 50996 kB | |
Buffers: 0 kB | |
Cached: 4072 kB | |
SwapCached: 0 kB | |
Active: 4224 kB | |
Inactive: 180 kB | |
Active(anon): 4224 kB | |
Inactive(anon): 180 kB | |
Active(file): 0 kB | |
Inactive(file): 0 kB | |
Unevictable: 0 kB | |
Mlocked: 0 kB | |
HighTotal: 0 kB | |
HighFree: 0 kB | |
LowTotal: 61064 kB | |
LowFree: 51456 kB | |
SwapTotal: 0 kB | |
SwapFree: 0 kB | |
Dirty: 0 kB | |
Writeback: 0 kB | |
AnonPages: 324 kB | |
Mapped: 1664 kB | |
Shmem: 4072 kB | |
Slab: 4740 kB | |
SReclaimable: 1776 kB | |
SUnreclaim: 2964 kB | |
KernelStack: 216 kB | |
PageTables: 24 kB | |
NFS_Unstable: 0 kB | |
Bounce: 0 kB | |
WritebackTmp: 0 kB | |
CommitLimit: 30532 kB | |
Committed_AS: 4968 kB | |
VmallocTotal: 1015800 kB | |
VmallocUsed: 16 kB | |
VmallocChunk: 1014748 kB | |
root@bmips# cat /proc/cpuinfo | |
system type : BMIPS multiplatform kernel | |
machine : Broadcom BCM96368MVWG | |
processor : 0 | |
cpu model : Broadcom BMIPS4350 V3.1 | |
BogoMIPS : 397.82 | |
wait instruction : yes | |
microsecond timers : yes | |
tlb_entries : 32 | |
extra interrupt vector : yes | |
hardware watchpoint : no | |
isa : mips1 mips2 mips32r1 | |
ASEs implemented : mips16 | |
shadow register sets : 1 | |
kscratch registers : 0 | |
package : 0 | |
core : 0 | |
VCED exceptions : not available | |
VCEI exceptions : not available | |
processor : 1 | |
cpu model : Broadcom BMIPS4350 V3.1 | |
BogoMIPS : 400.38 | |
wait instruction : yes | |
microsecond timers : yes | |
tlb_entries : 32 | |
extra interrupt vector : yes | |
hardware watchpoint : no | |
isa : mips1 mips2 mips32r1 | |
ASEs implemented : mips16 | |
shadow register sets : 1 | |
kscratch registers : 0 | |
package : 0 | |
core : 0 | |
VCED exceptions : not available | |
VCEI exceptions : not available | |
root@bmips# cat /proc/version | |
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #4 SMP Sat Nov 15 13:36:09 PST 2014 | |
root@bmips# cat /proc/interrupts | |
CPU0 CPU1 | |
0: 909 0 MIPS 0 smp_ipi0 | |
1: 0 1474 MIPS 1 smp_ipi1 | |
7: 747 647 MIPS 7 timer | |
8: 706 0 /periph_intc@10000024 2 bcm63xx_uart | |
ERR: 0 | |
root@bmips# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
BCM97360A0 CFE v3.0.14, Endian Mode: Little | |
Build Date: Fri Oct 18 17:43:29 PDT 2013 (alexchu@bse-hwav-01.broadcom.com) | |
Copyright (C) Broadcom Corporation. | |
CPU speed: 751MHz | |
DDR Frequency: 928 MHz | |
DDR Mode: DDR3 | |
Total memory(MEMC 0): 512MB | |
MEMC 0 DDR Width: 16 | |
Boot Device: NAND | |
Total flash: 256MB | |
RTS VERSION: Initial RTS Version | |
ETH0_PHY: INT | |
ETH0_MDIO_MODE: 1 | |
ETH0_SPEED: 100 | |
ETH0_PHYADDR: 1 | |
Initializing USB. | |
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub | |
CFE initialized. | |
Starting splash screen. | |
No valid image found in flash0.splash - disabling splash | |
CFE> ifconfig -auto eth0 ; boot -z -elf kcl:vmlinuz | |
Ethernet link is up: 100 Mbps Full-Duplex | |
Device eth0: hwaddr 00-10-18-C4-C3-FE, ipaddr 10.13.135.5, mask 255.255.254.0 | |
gateway 10.13.134.1, nameserver 10.10.10.10, domain broadcom.com | |
Loader:elf Filesys:tftp Dev:eth0 File:kcl:vmlinuz Options:(null) | |
Loading: 0x80010000/12196608 0x80bb1b00/322560 Entry address is 0x804e45c0 | |
Closing network. | |
Starting program at 0x804e45c0 | |
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #12 SMP Sat Nov 15 14:40:36 PST 2014 | |
CPU0 revision is: 00029032 (Broadcom BMIPS3300) | |
MIPS: machine is Broadcom BCM97360SVMB | |
Determined physical RAM map: | |
memory: 10000000 @ 00000000 (usable) | |
Malformed early option 'earlycon' | |
Initrd not found or empty - disabling initrd | |
Zone ranges: | |
Normal [mem 0x00000000-0x0fffffff] | |
HighMem empty | |
Movable zone start for each node | |
Early memory node ranges | |
node 0: [mem 0x00000000-0x0fffffff] | |
Initmem setup node 0 [mem 0x00000000-0x0fffffff] | |
Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes. | |
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes | |
PERCPU: Embedded 7 pages/cpu @81208000 s6912 r0 d21760 u32768 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 | |
Kernel command line: console=ttyS0,115200 earlycon | |
PID hash table entries: 1024 (order: 0, 4096 bytes) | |
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | |
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | |
Memory: 247540K/262144K available (4995K kernel code, 187K rwdata, 688K rodata, 6088K init, 257K bss, 14604K reserved, 0K highmem) | |
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
Hierarchical RCU implementation. | |
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. | |
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 | |
NR_IRQS:128 | |
irq_bcm7038_l1: registered BCM7038 L1 intc (mem: 0xb0411400, IRQs: 96) | |
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb0406600, parent IRQ(s): 1) | |
Calibrating delay loop... 746.49 BogoMIPS (lpj=1492992) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
Brought up 1 CPUs | |
devtmpfs: initialized | |
NET: Registered protocol family 16 | |
SCSI subsystem initialized | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
cfg80211: Calling CRDA to update world regulatory domain | |
Switched to clocksource MIPS | |
NET: Registered protocol family 2 | |
TCP established hash table entries: 2048 (order: 1, 8192 bytes) | |
TCP bind hash table entries: 2048 (order: 2, 16384 bytes) | |
TCP: Hash tables configured (established 2048 bind 2048) | |
TCP: reno registered | |
UDP hash table entries: 256 (order: 1, 8192 bytes) | |
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
NET: Registered protocol family 1 | |
RPC: Registered named UNIX socket transport module. | |
RPC: Registered udp transport module. | |
RPC: Registered tcp transport module. | |
RPC: Registered tcp NFSv4.1 backchannel transport module. | |
futex hash table entries: 256 (order: 3, 32768 bytes) | |
fuse init (API version 7.23) | |
io scheduler noop registered (default) | |
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
console [ttyS0] disabled | |
of_serial 10406800.serial: ttyS0 at MMIO 0x10406800 (irq = 61, base_baud = 5062500) is a 16550A | |
console [ttyS0] enabled | |
libphy: Fixed MDIO Bus: probed | |
bcmgenet 10430000.ethernet: failed to get enet clock | |
bcmgenet 10430000.ethernet: GENET 2.0 EPHY: 0x00b0 | |
bcmgenet 10430000.ethernet: failed to get enet-wol clock | |
libphy: bcmgenet MII bus: probed | |
bcmgenet 10430000.ethernet: configuring instance for internal PHY | |
attached PHY at address 1 [Broadcom BCM7XXX 40nm] | |
usbcore: registered new interface driver asix | |
usbcore: registered new interface driver ax88179_178a | |
usbcore: registered new interface driver cdc_ether | |
usbcore: registered new interface driver net1080 | |
usbcore: registered new interface driver cdc_subset | |
usbcore: registered new interface driver zaurus | |
usbcore: registered new interface driver cdc_ncm | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
ehci-platform: EHCI generic platform driver | |
ehci-platform 10480300.usb: EHCI Host Controller | |
ehci-platform 10480300.usb: new USB bus registered, assigned bus number 1 | |
ehci-platform 10480300.usb: irq 65, io mem 0x10480300 | |
ehci-platform 10480300.usb: USB 2.0 started, EHCI 1.00 | |
hub 1-0:1.0: USB hub found | |
hub 1-0:1.0: 2 ports detected | |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
ohci-platform: OHCI generic platform driver | |
ohci-platform 10480400.usb: Generic Platform OHCI controller | |
ohci-platform 10480400.usb: new USB bus registered, assigned bus number 2 | |
ohci-platform 10480400.usb: irq 66, io mem 0x10480400 | |
hub 2-0:1.0: USB hub found | |
hub 2-0:1.0: 2 ports detected | |
usbcore: registered new interface driver usb-storage | |
TCP: cubic registered | |
NET: Registered protocol family 10 | |
sit: IPv6 over IPv4 tunneling driver | |
NET: Registered protocol family 17 | |
Freeing unused kernel memory: 6088K (805ce000 - 80bc0000) | |
starting pid 815, tty '': '/etc/init.d/rcS' | |
Mounting virtual filesystems | |
mount: mounting none on /proc/bus/usb failed: No such file or directory | |
Starting mdev | |
bcmgenet 10430000.ethernet eth0: Link is Down | |
Configuring eth0 interface | |
net eth0: PHY already attached | |
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
Configuring lo interface | |
Configuring sit0 interface | |
Starting network services | |
starting pid 848, tty '': '/bin/cttyhack /bin/sh -l' | |
# bcmgenet 10430000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx | |
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
IPv6: eth0: IPv6 duplicate address fe80::210:18ff:fe36:231a detected! | |
# ping -c4 8.8.8.8 | |
PING 8.8.8.8 (8.8.8.8): 56 data bytes | |
64 bytes from 8.8.8.8: seq=0 ttl=41 time=35.844 ms | |
64 bytes from 8.8.8.8: seq=1 ttl=41 time=35.675 ms | |
64 bytes from 8.8.8.8: seq=2 ttl=41 time=35.933 ms | |
64 bytes from 8.8.8.8: seq=3 ttl=41 time=35.623 ms | |
--- 8.8.8.8 ping statistics --- | |
4 packets transmitted, 4 packets received, 0% packet loss | |
round-trip min/avg/max = 35.623/35.768/35.933 ms | |
# cat /proc/iomem | |
00000000-0fffffff : System RAM | |
00010000-004f0eef : Kernel code | |
004f0ef0-005cde7f : Kernel data | |
10406800-1040681f : serial | |
10430000-10434c8b : /ethernet@10430000 | |
10480300-104803ff : /usb@10480300 | |
10480400-104804ff : /usb@10480400 | |
# cat /proc/meminfo | |
MemTotal: 253628 kB | |
MemFree: 240392 kB | |
MemAvailable: 238708 kB | |
Buffers: 0 kB | |
Cached: 6028 kB | |
SwapCached: 0 kB | |
Active: 1776 kB | |
Inactive: 4844 kB | |
Active(anon): 1776 kB | |
Inactive(anon): 4844 kB | |
Active(file): 0 kB | |
Inactive(file): 0 kB | |
Unevictable: 0 kB | |
Mlocked: 0 kB | |
HighTotal: 0 kB | |
HighFree: 0 kB | |
LowTotal: 253628 kB | |
LowFree: 240392 kB | |
SwapTotal: 0 kB | |
SwapFree: 0 kB | |
Dirty: 0 kB | |
Writeback: 0 kB | |
AnonPages: 612 kB | |
Mapped: 1804 kB | |
Shmem: 6028 kB | |
Slab: 5112 kB | |
SReclaimable: 1852 kB | |
SUnreclaim: 3260 kB | |
KernelStack: 248 kB | |
PageTables: 84 kB | |
NFS_Unstable: 0 kB | |
Bounce: 0 kB | |
WritebackTmp: 0 kB | |
CommitLimit: 126812 kB | |
Committed_AS: 8004 kB | |
VmallocTotal: 1015800 kB | |
VmallocUsed: 24 kB | |
VmallocChunk: 1015760 kB | |
# cat /proc/cpuinfo | |
system type : BMIPS multiplatform kernel | |
machine : Broadcom BCM97360SVMB | |
processor : 0 | |
cpu model : Broadcom BMIPS3300 V3.2 | |
BogoMIPS : 746.49 | |
wait instruction : yes | |
microsecond timers : yes | |
tlb_entries : 32 | |
extra interrupt vector : yes | |
hardware watchpoint : no | |
isa : mips1 mips2 mips32r1 | |
ASEs implemented : mips16 | |
shadow register sets : 1 | |
kscratch registers : 0 | |
package : 0 | |
core : 0 | |
VCED exceptions : not available | |
VCEI exceptions : not available | |
# cat /proc/version | |
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #12 SMP Sat Nov 15 14:40:36 PST 2014 | |
# cat /proc/interrupts | |
CPU0 | |
0: 0 MIPS 0 smp_ipi0 | |
1: 0 MIPS 1 smp_ipi1 | |
7: 1048 MIPS 7 timer | |
24: 110 bcm7038-l1 24 eth0 | |
25: 0 bcm7038-l1 25 eth0 | |
61: 542 bcm7038-l1 61 serial | |
65: 0 bcm7038-l1 65 ehci_hcd:usb1 | |
66: 1 bcm7038-l1 66 ohci_hcd:usb2 | |
ERR: 0 | |
# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
BCM97420C_DDR3 CFE v3.25, CFE core v3.9, Endian Mode: Little | |
Build Date: Mon Jan 24 11:18:56 PST 2011 (rpereira@stb-irva-01) | |
Copyright (C) Broadcom Corporation. | |
NAND_ID_1 = 0xecd755b6, NAND_ID_2 = 0x78ecd755 | |
NAND_BLOCK_SIZE = 0x80000 NAND_PAGE_SIZE = 0x1000 NAND_MEM_TYPE= 0x3 | |
CPU speed: 750MHz | |
DRAM_0 size: 1024MB | |
DRAM_1 size: 256MB | |
MEMC_0 DDR Frequency=667 MHz | |
MEMC_1 DDR Frequency=667 MHz | |
MEMC_0 DDR Mode=DDR3 | |
MEMC_1 DDR Mode=DDR3 | |
MEMC_0 DDR Width = 32 | |
MEMC_0 DDR DEV TECH = 4 | |
MEMC_1 DDR Width = 32 | |
MEMC_1 DDR DEV TECH = 2 | |
Boot Device: NAND | |
Total flash: 2048MB | |
Initializing USB. | |
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub | |
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub | |
CFE initialized. | |
Starting splash screen. | |
No valid image found in flash0.splash - disabling splash | |
CFE> ifconfig -auto eth0 ; boot -z -elf kcl:vmlinuz | |
100 MB Full-Duplex (auto-neg) | |
Device eth0: hwaddr 00-10-18-C1-D3-21, ipaddr 10.13.135.162, mask 255.255.254.0 | |
gateway 10.13.134.1, nameserver 10.10.10.10, domain broadcom.com | |
Loader:elf Filesys:tftp Dev:eth0 File:kcl:vmlinuz Options:(null) | |
Loading: 0x80010000/12196608 0x80bb1b00/322560 Entry address is 0x804e45c0 | |
Closing network. | |
Starting program at 0x804e45c0 | |
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #12 SMP Sat Nov 15 14:40:36 PST 2014 | |
CPU0 revision is: 00025a02 (Broadcom BMIPS5000) | |
FPU revision is: 00130001 | |
MIPS: machine is Broadcom BCM97420C | |
Determined physical RAM map: | |
memory: 10000000 @ 00000000 (usable) | |
memory: 30000000 @ 20000000 (usable) | |
memory: 10000000 @ 60000000 (usable) | |
Malformed early option 'earlycon' | |
Initrd not found or empty - disabling initrd | |
Zone ranges: | |
Normal [mem 0x00000000-0x1fffffff] | |
HighMem [mem 0x20000000-0x6fffffff] | |
Movable zone start for each node | |
Early memory node ranges | |
node 0: [mem 0x00000000-0x0fffffff] | |
node 0: [mem 0x20000000-0x4fffffff] | |
node 0: [mem 0x60000000-0x6fffffff] | |
Initmem setup node 0 [mem 0x00000000-0x6fffffff] | |
Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes. | |
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | |
MIPS secondary cache 256kB, 8-way, linesize 128 bytes. | |
PERCPU: Embedded 7 pages/cpu @81e0f000 s6912 r0 d21760 u32768 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 326656 | |
Kernel command line: console=ttyS0,115200 earlycon | |
PID hash table entries: 1024 (order: 0, 4096 bytes) | |
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | |
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | |
Memory: 1283768K/1310720K available (4995K kernel code, 187K rwdata, 688K rodata, 6088K init, 257K bss, 26952K reserved, 1048576K highmem) | |
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
Hierarchical RCU implementation. | |
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
NR_IRQS:128 | |
irq_bcm7038_l1: registered BCM7038 L1 intc (mem: 0xb0441400, IRQs: 96) | |
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb0406780, parent IRQ(s): 1) | |
Calibrating delay loop... 497.66 BogoMIPS (lpj=995328) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
SMP: Booting CPU1... | |
CPU1 revision is: 00025a02 (Broadcom BMIPS5000) | |
FPU revision is: 00130001 | |
Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes. | |
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | |
MIPS secondary cache 256kB, 8-way, linesize 128 bytes. | |
Synchronize counters for CPU 1: done. | |
SMP: CPU1 is running | |
Brought up 2 CPUs | |
devtmpfs: initialized | |
NET: Registered protocol family 16 | |
SCSI subsystem initialized | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
Switched to clocksource MIPS | |
cfg80211: Calling CRDA to update world regulatory domain | |
NET: Registered protocol family 2 | |
TCP established hash table entries: 2048 (order: 1, 8192 bytes) | |
TCP bind hash table entries: 2048 (order: 2, 16384 bytes) | |
TCP: Hash tables configured (established 2048 bind 2048) | |
TCP: reno registered | |
UDP hash table entries: 256 (order: 1, 8192 bytes) | |
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
NET: Registered protocol family 1 | |
RPC: Registered named UNIX socket transport module. | |
RPC: Registered udp transport module. | |
RPC: Registered tcp transport module. | |
RPC: Registered tcp NFSv4.1 backchannel transport module. | |
futex hash table entries: 512 (order: 4, 65536 bytes) | |
fuse init (API version 7.23) | |
bounce: pool size: 64 pages | |
io scheduler noop registered (default) | |
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
console [ttyS0] disabled | |
of_serial 10406b00.serial: ttyS0 at MMIO 0x10406b00 (irq = 21, base_baud = 5062500) is a 16550A | |
console [ttyS0] enabled | |
libphy: Fixed MDIO Bus: probed | |
usbcore: registered new interface driver asix | |
usbcore: registered new interface driver ax88179_178a | |
usbcore: registered new interface driver cdc_ether | |
usbcore: registered new interface driver net1080 | |
usbcore: registered new interface driver cdc_subset | |
usbcore: registered new interface driver zaurus | |
usbcore: registered new interface driver cdc_ncm | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
ehci-platform: EHCI generic platform driver | |
ehci-platform 10488300.usb: EHCI Host Controller | |
ehci-platform 10488300.usb: new USB bus registered, assigned bus number 1 | |
ehci-platform 10488300.usb: irq 60, io mem 0x10488300 | |
ehci-platform 10488300.usb: USB 2.0 started, EHCI 1.00 | |
hub 1-0:1.0: USB hub found | |
hub 1-0:1.0: 2 ports detected | |
ehci-platform 10488500.usb: EHCI Host Controller | |
ehci-platform 10488500.usb: new USB bus registered, assigned bus number 2 | |
ehci-platform 10488500.usb: irq 55, io mem 0x10488500 | |
ehci-platform 10488500.usb: USB 2.0 started, EHCI 1.00 | |
hub 2-0:1.0: USB hub found | |
hub 2-0:1.0: 2 ports detected | |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
ohci-platform: OHCI generic platform driver | |
ohci-platform 10488400.usb: Generic Platform OHCI controller | |
ohci-platform 10488400.usb: new USB bus registered, assigned bus number 3 | |
ohci-platform 10488400.usb: irq 61, io mem 0x10488400 | |
hub 3-0:1.0: USB hub found | |
hub 3-0:1.0: 2 ports detected | |
ohci-platform 10488600.usb: Generic Platform OHCI controller | |
ohci-platform 10488600.usb: new USB bus registered, assigned bus number 4 | |
ohci-platform 10488600.usb: irq 62, io mem 0x10488600 | |
hub 4-0:1.0: USB hub found | |
hub 4-0:1.0: 2 ports detected | |
usbcore: registered new interface driver usb-storage | |
TCP: cubic registered | |
NET: Registered protocol family 10 | |
sit: IPv6 over IPv4 tunneling driver | |
NET: Registered protocol family 17 | |
Freeing unused kernel memory: 6088K (805ce000 - 80bc0000) | |
starting pid 817, tty '': '/etc/init.d/rcS' | |
Mounting virtual filesystems | |
mount: mounting none on /proc/bus/usb failed: No such file or directory | |
Starting mdev | |
Configuring lo interface | |
Configuring sit0 interface | |
Starting network services | |
starting pid 845, tty '': '/bin/cttyhack /bin/sh -l' | |
# cat /proc/iomem | |
00000000-0fffffff : System RAM | |
00010000-004f0eef : Kernel code | |
004f0ef0-005cde7f : Kernel data | |
10406b00-10406b1f : serial | |
10488300-104883ff : /usb@10488300 | |
10488400-104884ff : /usb@10488400 | |
10488500-104885ff : /usb@10488500 | |
10488600-104886ff : /usb@10488600 | |
# cat /proc/meminfo | |
MemTotal: 1289856 kB | |
MemFree: 1275832 kB | |
MemAvailable: 1271552 kB | |
Buffers: 0 kB | |
Cached: 6020 kB | |
SwapCached: 0 kB | |
Active: 1592 kB | |
Inactive: 4912 kB | |
Active(anon): 1592 kB | |
Inactive(anon): 4912 kB | |
Active(file): 0 kB | |
Inactive(file): 0 kB | |
Unevictable: 0 kB | |
Mlocked: 0 kB | |
HighTotal: 1048576 kB | |
HighFree: 1041384 kB | |
LowTotal: 241280 kB | |
LowFree: 234448 kB | |
SwapTotal: 0 kB | |
SwapFree: 0 kB | |
Dirty: 0 kB | |
Writeback: 0 kB | |
AnonPages: 492 kB | |
Mapped: 1740 kB | |
Shmem: 6020 kB | |
Slab: 5484 kB | |
SReclaimable: 1868 kB | |
SUnreclaim: 3616 kB | |
KernelStack: 280 kB | |
PageTables: 72 kB | |
NFS_Unstable: 0 kB | |
Bounce: 0 kB | |
WritebackTmp: 0 kB | |
CommitLimit: 644928 kB | |
Committed_AS: 5836 kB | |
VmallocTotal: 1015800 kB | |
VmallocUsed: 24 kB | |
VmallocChunk: 1015768 kB | |
# cat /proc/cpuinfo | |
system type : BMIPS multiplatform kernel | |
machine : Broadcom BCM97420C | |
processor : 0 | |
cpu model : Broadcom BMIPS5000 V0.2 FPU V0.1 | |
BogoMIPS : 497.66 | |
wait instruction : yes | |
microsecond timers : yes | |
tlb_entries : 64 | |
extra interrupt vector : yes | |
hardware watchpoint : no | |
isa : mips1 mips2 mips32r1 | |
ASEs implemented : | |
shadow register sets : 1 | |
kscratch registers : 0 | |
package : 0 | |
core : 0 | |
VCED exceptions : not available | |
VCEI exceptions : not available | |
processor : 1 | |
cpu model : Broadcom BMIPS5000 V0.2 FPU V0.1 | |
BogoMIPS : 374.78 | |
wait instruction : yes | |
microsecond timers : yes | |
tlb_entries : 64 | |
extra interrupt vector : yes | |
hardware watchpoint : no | |
isa : mips1 mips2 mips32r1 | |
ASEs implemented : | |
shadow register sets : 1 | |
kscratch registers : 0 | |
package : 0 | |
core : 0 | |
VCED exceptions : not available | |
VCEI exceptions : not available | |
# cat /proc/version | |
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #12 SMP Sat Nov 15 14:40:36 PST 2014 | |
# cat /proc/interrupts | |
CPU0 CPU1 | |
0: 146 448 MIPS 0 smp_ipi0 | |
1: 133 54 MIPS 1 smp_ipi1 | |
7: 370 368 MIPS 7 timer | |
21: 442 0 bcm7038-l1 21 serial | |
55: 0 0 bcm7038-l1 55 ehci_hcd:usb2 | |
60: 0 0 bcm7038-l1 60 ehci_hcd:usb1 | |
61: 1 0 bcm7038-l1 61 ohci_hcd:usb3 | |
62: 1 0 bcm7038-l1 62 ohci_hcd:usb4 | |
ERR: 1 | |
# echo 2 > /proc/irq/21/smp_affinity | |
# cat /proc/interrupts | |
CPU0 CPU1 | |
0: 148 449 MIPS 0 smp_ipi0 | |
1: 134 58 MIPS 1 smp_ipi1 | |
7: 395 375 MIPS 7 timer | |
21: 620 18 bcm7038-l1 21 serial | |
55: 0 0 bcm7038-l1 55 ehci_hcd:usb2 | |
60: 0 0 bcm7038-l1 60 ehci_hcd:usb1 | |
61: 1 0 bcm7038-l1 61 ohci_hcd:usb3 | |
62: 1 0 bcm7038-l1 62 ohci_hcd:usb4 | |
ERR: 1 | |
# cat /proc/interrupts | |
CPU0 CPU1 | |
0: 149 451 MIPS 0 smp_ipi0 | |
1: 134 63 MIPS 1 smp_ipi1 | |
7: 404 384 MIPS 7 timer | |
21: 620 60 bcm7038-l1 21 serial | |
55: 0 0 bcm7038-l1 55 ehci_hcd:usb2 | |
60: 0 0 bcm7038-l1 60 ehci_hcd:usb1 | |
61: 1 0 bcm7038-l1 61 ohci_hcd:usb3 | |
62: 1 0 bcm7038-l1 62 ohci_hcd:usb4 | |
ERR: 1 | |
# echo 1 > /proc/irq/21/smp_affinity | |
# cat /proc/interrupts | |
CPU0 CPU1 | |
0: 149 453 MIPS 0 smp_ipi0 | |
1: 138 64 MIPS 1 smp_ipi1 | |
7: 415 412 MIPS 7 timer | |
21: 638 229 bcm7038-l1 21 serial | |
55: 0 0 bcm7038-l1 55 ehci_hcd:usb2 | |
60: 0 0 bcm7038-l1 60 ehci_hcd:usb1 | |
61: 1 0 bcm7038-l1 61 ohci_hcd:usb3 | |
62: 1 0 bcm7038-l1 62 ohci_hcd:usb4 | |
ERR: 1 | |
# cat /proc/interrupts | |
CPU0 CPU1 | |
0: 150 455 MIPS 0 smp_ipi0 | |
1: 143 64 MIPS 1 smp_ipi1 | |
7: 421 418 MIPS 7 timer | |
21: 680 229 bcm7038-l1 21 serial | |
55: 0 0 bcm7038-l1 55 ehci_hcd:usb2 | |
60: 0 0 bcm7038-l1 60 ehci_hcd:usb1 | |
61: 1 0 bcm7038-l1 61 ohci_hcd:usb3 | |
62: 1 0 bcm7038-l1 62 ohci_hcd:usb4 | |
ERR: 1 | |
# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
BCM97425B0 CFE v3.0.43, Endian Mode: Little | |
Build Date: Mon Oct 28 10:41:30 PDT 2013 (cernekee@vm) | |
DEVELOPMENT BUILD: pref30 enabled, 800MHz DDR | |
Copyright (C) Broadcom Corporation. | |
ReShmoo MEMC1 | |
ReShmoo MEMC0 | |
Enabling NAND flash at CS1: MT29F32G08CBACA(DEVICE ID=0x2C68044A), ECC Level=12, Spare Area Size=27 | |
SPANSION SPI flash detected: spi_lookup_device_type, mem_type = 20, mem_density = 18 | |
Size = 16MB, Sector Size 65536, Page Size 256 | |
CPU speed: 1305MHz | |
DDR Frequency: 796 MHz | |
DDR Mode: DDR3 | |
Total memory(MEMC 0): 1024MB | |
MEMC 0 DDR Width: 32 | |
Total memory(MEMC 1): 1024MB | |
MEMC 1 DDR Width: 32 | |
Boot Device: SPI | |
Total flash: 16MB | |
RTS VERSION: 20120919184252_7425_single_encode | |
ETH0_PHY: INT | |
ETH0_MDIO_MODE: 1 | |
ETH0_SPEED: 100 | |
ETH0_PHYADDR: 1 | |
Initializing USB. | |
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub | |
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub | |
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub | |
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub | |
CFE initialized. | |
Starting splash screen. | |
No valid image found in flash0.splash - disabling splash | |
CFE> boot kcl:vmlinuz | |
Ethernet link is up: 100 Mbps Full-Duplex | |
Device eth0: hwaddr 00-10-18-F6-23-20, ipaddr 10.13.135.39, mask 255.255.254.0 | |
gateway 10.13.134.1, nameserver 10.10.10.10, domain broadcom.com | |
Loader:elf Filesys:tftp Dev:(null) File:kcl:vmlinuz Options:(null) | |
Loading: 0x80010000/12196608 0x80bb1b00/322560 Entry address is 0x804e45c0 | |
Closing network. | |
Starting program at 0x804e45c0 | |
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #12 SMP Sat Nov 15 14:40:36 PST 2014 | |
CPU0 revision is: 00025a11 (Broadcom BMIPS5000) | |
FPU revision is: 00130001 | |
MIPS: machine is Broadcom BCM97425SVMB | |
Determined physical RAM map: | |
memory: 10000000 @ 00000000 (usable) | |
memory: 30000000 @ 20000000 (usable) | |
Malformed early option 'earlycon' | |
Initrd not found or empty - disabling initrd | |
Zone ranges: | |
Normal [mem 0x00000000-0x1fffffff] | |
HighMem [mem 0x20000000-0x4fffffff] | |
Movable zone start for each node | |
Early memory node ranges | |
node 0: [mem 0x00000000-0x0fffffff] | |
node 0: [mem 0x20000000-0x4fffffff] | |
Initmem setup node 0 [mem 0x00000000-0x4fffffff] | |
Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes. | |
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | |
MIPS secondary cache 256kB, 8-way, linesize 128 bytes. | |
PERCPU: Embedded 7 pages/cpu @81a0d000 s6912 r0 d21760 u32768 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261120 | |
Kernel command line: console=ttyS0,115200 earlycon | |
PID hash table entries: 1024 (order: 0, 4096 bytes) | |
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | |
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | |
Memory: 1025728K/1048576K available (4995K kernel code, 187K rwdata, 688K rodata, 6088K init, 257K bss, 22848K reserved, 786432K highmem) | |
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
Hierarchical RCU implementation. | |
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
NR_IRQS:128 | |
irq_bcm7038_l1: registered BCM7038 L1 intc (mem: 0xb041a400, IRQs: 96) | |
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xb0406780, parent IRQ(s): 1) | |
Calibrating delay loop... 866.30 BogoMIPS (lpj=1732608) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
SMP: Booting CPU1... | |
CPU1 revision is: 00025a11 (Broadcom BMIPS5000) | |
FPU revision is: 00130001 | |
Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes. | |
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes | |
MIPS secondary cache 256kB, 8-way, linesize 128 bytes. | |
Synchronize counters for CPU 1: done. | |
SMP: CPU1 is running | |
Brought up 2 CPUs | |
devtmpfs: initialized | |
NET: Registered protocol family 16 | |
SCSI subsystem initialized | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
cfg80211: Calling CRDA to update world regulatory domain | |
Switched to clocksource MIPS | |
NET: Registered protocol family 2 | |
TCP established hash table entries: 2048 (order: 1, 8192 bytes) | |
TCP bind hash table entries: 2048 (order: 2, 16384 bytes) | |
TCP: Hash tables configured (established 2048 bind 2048) | |
TCP: reno registered | |
UDP hash table entries: 256 (order: 1, 8192 bytes) | |
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
NET: Registered protocol family 1 | |
RPC: Registered named UNIX socket transport module. | |
RPC: Registered udp transport module. | |
RPC: Registered tcp transport module. | |
RPC: Registered tcp NFSv4.1 backchannel transport module. | |
futex hash table entries: 512 (order: 4, 65536 bytes) | |
fuse init (API version 7.23) | |
bounce: pool size: 64 pages | |
io scheduler noop registered (default) | |
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
console [ttyS0] disabled | |
of_serial 10406b00.serial: ttyS0 at MMIO 0x10406b00 (irq = 61, base_baud = 5062500) is a 16550A | |
console [ttyS0] enabled | |
libphy: Fixed MDIO Bus: probed | |
bcmgenet 10b80000.ethernet: failed to get enet clock | |
bcmgenet 10b80000.ethernet: GENET 3.0 EPHY: 0x00b0 | |
bcmgenet 10b80000.ethernet: failed to get enet-wol clock | |
libphy: bcmgenet MII bus: probed | |
bcmgenet 10b80000.ethernet: configuring instance for internal PHY | |
attached PHY at address 1 [Broadcom BCM7XXX 40nm] | |
usbcore: registered new interface driver asix | |
usbcore: registered new interface driver ax88179_178a | |
usbcore: registered new interface driver cdc_ether | |
usbcore: registered new interface driver net1080 | |
usbcore: registered new interface driver cdc_subset | |
usbcore: registered new interface driver zaurus | |
usbcore: registered new interface driver cdc_ncm | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
ehci-platform: EHCI generic platform driver | |
ehci-platform 10480300.usb: EHCI Host Controller | |
ehci-platform 10480300.usb: new USB bus registered, assigned bus number 1 | |
ehci-platform 10480300.usb: irq 65, io mem 0x10480300 | |
ehci-platform 10480300.usb: USB 2.0 started, EHCI 1.00 | |
hub 1-0:1.0: USB hub found | |
hub 1-0:1.0: 1 port detected | |
ehci-platform 10480500.usb: EHCI Host Controller | |
ehci-platform 10480500.usb: new USB bus registered, assigned bus number 2 | |
ehci-platform 10480500.usb: irq 66, io mem 0x10480500 | |
ehci-platform 10480500.usb: USB 2.0 started, EHCI 1.00 | |
hub 2-0:1.0: USB hub found | |
hub 2-0:1.0: 1 port detected | |
ehci-platform 10490300.usb: EHCI Host Controller | |
ehci-platform 10490300.usb: new USB bus registered, assigned bus number 3 | |
ehci-platform 10490300.usb: irq 70, io mem 0x10490300 | |
ehci-platform 10490300.usb: USB 2.0 started, EHCI 1.00 | |
hub 3-0:1.0: USB hub found | |
hub 3-0:1.0: 1 port detected | |
ehci-platform 10490500.usb: EHCI Host Controller | |
ehci-platform 10490500.usb: new USB bus registered, assigned bus number 4 | |
ehci-platform 10490500.usb: irq 71, io mem 0x10490500 | |
ehci-platform 10490500.usb: USB 2.0 started, EHCI 1.00 | |
hub 4-0:1.0: USB hub found | |
hub 4-0:1.0: 1 port detected | |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
ohci-platform: OHCI generic platform driver | |
ohci-platform 10480400.usb: Generic Platform OHCI controller | |
ohci-platform 10480400.usb: new USB bus registered, assigned bus number 5 | |
ohci-platform 10480400.usb: irq 67, io mem 0x10480400 | |
hub 5-0:1.0: USB hub found | |
hub 5-0:1.0: 1 port detected | |
ohci-platform 10480600.usb: Generic Platform OHCI controller | |
ohci-platform 10480600.usb: new USB bus registered, assigned bus number 6 | |
ohci-platform 10480600.usb: irq 68, io mem 0x10480600 | |
hub 6-0:1.0: USB hub found | |
hub 6-0:1.0: 1 port detected | |
ohci-platform 10490400.usb: Generic Platform OHCI controller | |
ohci-platform 10490400.usb: new USB bus registered, assigned bus number 7 | |
ohci-platform 10490400.usb: irq 72, io mem 0x10490400 | |
hub 7-0:1.0: USB hub found | |
hub 7-0:1.0: 1 port detected | |
ohci-platform 10490600.usb: Generic Platform OHCI controller | |
ohci-platform 10490600.usb: new USB bus registered, assigned bus number 8 | |
ohci-platform 10490600.usb: irq 73, io mem 0x10490600 | |
hub 8-0:1.0: USB hub found | |
hub 8-0:1.0: 1 port detected | |
usbcore: registered new interface driver usb-storage | |
TCP: cubic registered | |
NET: Registered protocol family 10 | |
sit: IPv6 over IPv4 tunneling driver | |
NET: Registered protocol family 17 | |
Freeing unused kernel memory: 6088K (805ce000 - 80bc0000) | |
starting pid 839, tty '': '/etc/init.d/rcS' | |
Mounting virtual filesystems | |
mount: mounting none on /proc/bus/usb failed: No such file or directory | |
Starting mdev | |
Configuring eth0 interface | |
bcmgenet 10b80000.ethernet eth0: Link is Down | |
net eth0: PHY already attached | |
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
Configuring lo interface | |
Configuring sit0 interface | |
Starting network services | |
starting pid 871, tty '': '/bin/cttyhack /bin/sh -l' | |
# bcmgenet 10b80000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx | |
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
# ping -c4 8.8.8.8 | |
PING 8.8.8.8 (8.8.8.8): 56 data bytes | |
64 bytes from 8.8.8.8: seq=0 ttl=41 time=35.767 ms | |
64 bytes from 8.8.8.8: seq=1 ttl=41 time=35.139 ms | |
64 bytes from 8.8.8.8: seq=2 ttl=41 time=34.985 ms | |
64 bytes from 8.8.8.8: seq=3 ttl=41 time=35.001 ms | |
--- 8.8.8.8 ping statistics --- | |
4 packets transmitted, 4 packets received, 0% packet loss | |
round-trip min/avg/max = 34.985/35.223/35.767 ms | |
# cat /proc/iomem | |
00000000-0fffffff : System RAM | |
00010000-004f0eef : Kernel code | |
004f0ef0-005cde7f : Kernel data | |
10406b00-10406b1f : serial | |
10480300-104803ff : /usb@10480300 | |
10480400-104804ff : /usb@10480400 | |
10480500-104805ff : /usb@10480500 | |
10480600-104806ff : /usb@10480600 | |
10490300-104903ff : /usb@10490300 | |
10490400-104904ff : /usb@10490400 | |
10490500-104905ff : /usb@10490500 | |
10490600-104906ff : /usb@10490600 | |
10b80000-10b91c87 : /ethernet@10b80000 | |
# cat /proc/meminfo | |
MemTotal: 1031816 kB | |
MemFree: 1016720 kB | |
MemAvailable: 1012992 kB | |
Buffers: 0 kB | |
Cached: 6028 kB | |
SwapCached: 0 kB | |
Active: 1684 kB | |
Inactive: 4860 kB | |
Active(anon): 1684 kB | |
Inactive(anon): 4860 kB | |
Active(file): 0 kB | |
Inactive(file): 0 kB | |
Unevictable: 0 kB | |
Mlocked: 0 kB | |
HighTotal: 786432 kB | |
HighFree: 779240 kB | |
LowTotal: 245384 kB | |
LowFree: 237480 kB | |
SwapTotal: 0 kB | |
SwapFree: 0 kB | |
Dirty: 0 kB | |
Writeback: 0 kB | |
AnonPages: 568 kB | |
Mapped: 1764 kB | |
Shmem: 6028 kB | |
Slab: 5820 kB | |
SReclaimable: 1920 kB | |
SUnreclaim: 3900 kB | |
KernelStack: 288 kB | |
PageTables: 76 kB | |
NFS_Unstable: 0 kB | |
Bounce: 0 kB | |
WritebackTmp: 0 kB | |
CommitLimit: 515908 kB | |
Committed_AS: 7836 kB | |
VmallocTotal: 1015800 kB | |
VmallocUsed: 24 kB | |
VmallocChunk: 1015760 kB | |
# cat /proc/cpuinfo | |
system type : BMIPS multiplatform kernel | |
machine : Broadcom BCM97425SVMB | |
processor : 0 | |
cpu model : Broadcom BMIPS5000 V1.1 FPU V0.1 | |
BogoMIPS : 866.30 | |
wait instruction : yes | |
microsecond timers : yes | |
tlb_entries : 64 | |
extra interrupt vector : yes | |
hardware watchpoint : no | |
isa : mips1 mips2 mips32r1 | |
ASEs implemented : | |
shadow register sets : 1 | |
kscratch registers : 0 | |
package : 0 | |
core : 0 | |
VCED exceptions : not available | |
VCEI exceptions : not available | |
processor : 1 | |
cpu model : Broadcom BMIPS5000 V1.1 FPU V0.1 | |
BogoMIPS : 651.26 | |
wait instruction : yes | |
microsecond timers : yes | |
tlb_entries : 64 | |
extra interrupt vector : yes | |
hardware watchpoint : no | |
isa : mips1 mips2 mips32r1 | |
ASEs implemented : | |
shadow register sets : 1 | |
kscratch registers : 0 | |
package : 0 | |
core : 0 | |
VCED exceptions : not available | |
VCEI exceptions : not available | |
# cat /proc/version | |
Linux version 3.18.0-rc4+ (cernekee@vm) (gcc version 4.8.4 20140811 (prerelease) (Broadcom stbgcc-4.8-1.0) ) #12 SMP Sat Nov 15 14:40:36 PST 2014 | |
# cat /proc/interrupts | |
CPU0 CPU1 | |
0: 531 315 MIPS 0 smp_ipi0 | |
1: 146 79 MIPS 1 smp_ipi1 | |
7: 484 367 MIPS 7 timer | |
17: 168 0 bcm7038-l1 17 eth0 | |
18: 0 0 bcm7038-l1 18 eth0 | |
61: 547 0 bcm7038-l1 61 serial | |
65: 0 0 bcm7038-l1 65 ehci_hcd:usb1 | |
66: 0 0 bcm7038-l1 66 ehci_hcd:usb2 | |
67: 1 0 bcm7038-l1 67 ohci_hcd:usb5 | |
68: 1 0 bcm7038-l1 68 ohci_hcd:usb6 | |
70: 0 0 bcm7038-l1 70 ehci_hcd:usb3 | |
71: 0 0 bcm7038-l1 71 ehci_hcd:usb4 | |
72: 1 0 bcm7038-l1 72 ohci_hcd:usb7 | |
73: 1 0 bcm7038-l1 73 ohci_hcd:usb8 | |
ERR: 1 | |
# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment