Created
December 23, 2021 18:15
-
-
Save cheapie/f30c97df1131e875980ef8876094fc98 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# hdparm -I /dev/sda | |
/dev/sda: | |
ATA device, with non-removable media | |
Model Number: ST10000DM005-3AW101 | |
Serial Number: WP004PSJ | |
Firmware Revision: DN04 | |
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0 | |
Standards: | |
Used: unknown (minor revision code 0xffff) | |
Supported: 11 10 9 8 7 6 5 | |
Likely used: 11 | |
Configuration: | |
Logical max current | |
cylinders 16383 16383 | |
heads 16 16 | |
sectors/track 63 63 | |
-- | |
CHS current addressable sectors: 16514064 | |
LBA user addressable sectors: 268435455 | |
LBA48 user addressable sectors: 2441609216 | |
Logical Sector size: 4096 bytes [ Supported: 256 2048 ] | |
Physical Sector size: 4096 bytes | |
Logical Sector-0 offset: 0 bytes | |
device size with M = 1024*1024: 9537536 MBytes | |
device size with M = 1000*1000: 10000831 MBytes (10000 GB) | |
cache/buffer size = unknown | |
Form Factor: 3.5 inch | |
Nominal Media Rotation Rate: 7200 | |
Capabilities: | |
LBA, IORDY(can be disabled) | |
Queue depth: 32 | |
Standby timer values: spec'd by Standard, no device specific minimum | |
R/W multiple sector transfer: Max = 16 Current = 16 | |
Recommended acoustic management value: 254, current value: 0 | |
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 | |
Cycle time: min=120ns recommended=120ns | |
PIO: pio0 pio1 pio2 pio3 pio4 | |
Cycle time: no flow control=120ns IORDY flow control=120ns | |
Commands/features: | |
Enabled Supported: | |
* SMART feature set | |
Security Mode feature set | |
* Power Management feature set | |
* Write cache | |
* Look-ahead | |
* WRITE_BUFFER command | |
* READ_BUFFER command | |
* DOWNLOAD_MICROCODE | |
Power-Up In Standby feature set | |
* SET_FEATURES required to spinup after power up | |
SET_MAX security extension | |
* 48-bit Address feature set | |
* Mandatory FLUSH_CACHE | |
* FLUSH_CACHE_EXT | |
* SMART error logging | |
* SMART self-test | |
* Media Card Pass-Through | |
* General Purpose Logging feature set | |
* WRITE_{DMA|MULTIPLE}_FUA_EXT | |
* 64-bit World wide name | |
* IDLE_IMMEDIATE with UNLOAD | |
Write-Read-Verify feature set | |
* WRITE_UNCORRECTABLE_EXT command | |
* {READ,WRITE}_DMA_EXT_GPL commands | |
* Segmented DOWNLOAD_MICROCODE | |
* unknown 119[6] | |
* unknown 119[7] | |
unknown 119[8] | |
unknown 119[9] | |
* Gen1 signaling speed (1.5Gb/s) | |
* Gen2 signaling speed (3.0Gb/s) | |
* Gen3 signaling speed (6.0Gb/s) | |
* Native Command Queueing (NCQ) | |
* Phy event counters | |
* Idle-Unload when NCQ is active | |
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT | |
* DMA Setup Auto-Activate optimization | |
Device-initiated interface power management | |
* Software settings preservation | |
unknown 78[7] | |
* SMART Command Transport (SCT) feature set | |
* SCT Write Same (AC2) | |
* SCT Error Recovery Control (AC3) | |
* SCT Features Control (AC4) | |
* SCT Data Tables (AC5) | |
unknown 206[7] | |
unknown 206[12] (vendor specific) | |
unknown 206[14] (vendor specific) | |
* SANITIZE_ANTIFREEZE_LOCK_EXT command | |
* SANITIZE feature set | |
* OVERWRITE_EXT command | |
* Extended number of user addressable sectors | |
Security: | |
Master password revision code = 65534 | |
supported | |
not enabled | |
not locked | |
not frozen | |
not expired: security count | |
supported: enhanced erase | |
852min for SECURITY ERASE UNIT. 852min for ENHANCED SECURITY ERASE UNIT. | |
Logical Unit WWN Device Identifier: 5000c500dc975032 | |
NAA : 5 | |
IEEE OUI : 000c50 | |
Unique ID : 0dc975032 | |
Checksum: correct | |
# smartctl -x /dev/sda | |
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.0-rc4-amd64] (local build) | |
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Device Model: ST10000DM005-3AW101 | |
Serial Number: WP004PSJ | |
LU WWN Device Id: 5 000c50 0dc975032 | |
Firmware Version: DN04 | |
User Capacity: 10,000,831,348,736 bytes [10.0 TB] | |
Sector Size: 4096 bytes logical/physical | |
Rotation Rate: 7200 rpm | |
Form Factor: 3.5 inches | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: ACS-4 (minor revision not indicated) | |
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) | |
Local Time is: Thu Dec 23 12:14:47 2021 CST | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
DSN feature is: Disabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters | |
Wt Cache Reorder: Unknown (SCT Feature Control command failed) | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x82) Offline data collection activity | |
was completed without error. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 992) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 851) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 2) minutes. | |
SCT capabilities: (0x50bd) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 10 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-- 075 064 044 - 3899219 | |
3 Spin_Up_Time PO---- 088 088 000 - 0 | |
4 Start_Stop_Count -O--CK 100 100 020 - 10 | |
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 | |
7 Seek_Error_Rate POSR-- 100 253 045 - 43217 | |
9 Power_On_Hours -O--CK 100 100 000 - 0 | |
10 Spin_Retry_Count PO--C- 100 100 097 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 020 - 10 | |
18 Unknown_Attribute PO-R-- 100 100 050 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 0 | |
188 Command_Timeout -O--CK 100 100 000 - 0 | |
190 Airflow_Temperature_Cel -O---K 068 064 000 - 32 (Min/Max 26/32) | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 2 | |
193 Load_Cycle_Count -O--CK 100 100 000 - 10 | |
194 Temperature_Celsius -O---K 032 040 000 - 32 (0 24 0 0 0) | |
197 Current_Pending_Sector -O--C- 100 100 000 - 0 | |
198 Offline_Uncorrectable ----C- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 | |
240 Head_Flying_Hours ------ 100 253 000 - 0 (251 67 0) | |
241 Total_LBAs_Written ------ 100 253 000 - 384054 | |
242 Total_LBAs_Read ------ 100 253 000 - 3515165 | |
||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
Address Access R/W Size Description | |
0x00 GPL,SL R/O 1 Log Directory | |
0x01 SL R/O 1 Summary SMART error log | |
0x02 SL R/O 5 Comprehensive SMART error log | |
0x03 GPL R/O 5 Ext. Comprehensive SMART error log | |
0x04 GPL R/O 256 Device Statistics log | |
0x04 SL R/O 8 Device Statistics log | |
0x06 SL R/O 1 SMART self-test log | |
0x07 GPL R/O 1 Extended self-test log | |
0x08 GPL R/O 2 Power Conditions log | |
0x09 SL R/W 1 Selective self-test log | |
0x0a GPL R/W 8 Device Statistics Notification | |
0x0c GPL R/O 2048 Pending Defects log | |
0x10 GPL R/O 1 NCQ Command Error log | |
0x11 GPL R/O 1 SATA Phy Event Counters log | |
0x13 GPL R/O 1 SATA NCQ Send and Receive log | |
0x21 GPL R/O 1 Write stream error log | |
0x22 GPL R/O 1 Read stream error log | |
0x24 GPL R/O 768 Current Device Internal Status Data log | |
0x2f GPL - 1 Set Sector Configuration | |
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log | |
0x80-0x9f GPL,SL R/W 16 Host vendor specific log | |
0xa1 GPL,SL VS 160 Device vendor specific log | |
0xa2 GPL VS 16320 Device vendor specific log | |
0xa4 GPL,SL VS 160 Device vendor specific log | |
0xa6 GPL VS 192 Device vendor specific log | |
0xa8-0xa9 GPL,SL VS 136 Device vendor specific log | |
0xab GPL VS 1 Device vendor specific log | |
0xad GPL VS 16 Device vendor specific log | |
0xb1 GPL,SL VS 160 Device vendor specific log | |
0xb6 GPL VS 1920 Device vendor specific log | |
0xbe-0xbf GPL VS 65535 Device vendor specific log | |
0xc1 GPL,SL VS 8 Device vendor specific log | |
0xc3 GPL,SL VS 24 Device vendor specific log | |
0xc6 GPL VS 5184 Device vendor specific log | |
0xc7 GPL,SL VS 8 Device vendor specific log | |
0xc9 GPL,SL VS 8 Device vendor specific log | |
0xca GPL,SL VS 16 Device vendor specific log | |
0xcd GPL,SL VS 1 Device vendor specific log | |
0xce GPL VS 1 Device vendor specific log | |
0xcf GPL VS 512 Device vendor specific log | |
0xd1 GPL VS 656 Device vendor specific log | |
0xd2 GPL VS 10256 Device vendor specific log | |
0xd4 GPL VS 2048 Device vendor specific log | |
0xda GPL,SL VS 1 Device vendor specific log | |
0xe0 GPL,SL R/W 1 SCT Command/Status | |
0xe1 GPL,SL R/W 1 SCT Data Transfer | |
SMART Extended Comprehensive Error Log Version: 1 (5 sectors) | |
No Errors Logged | |
SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
SCT Status Version: 3 | |
SCT Version (vendor specific): 522 (0x020a) | |
Device State: Active (0) | |
Current Temperature: 32 Celsius | |
Power Cycle Min/Max Temperature: 26/32 Celsius | |
Lifetime Min/Max Temperature: 24/36 Celsius | |
Under/Over Temperature Limit Count: 0/1 | |
SMART Status: 0xc24f (PASSED) | |
Vendor specific: | |
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | |
00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 4 minutes | |
Temperature Logging Interval: 59 minutes | |
Min/Max recommended Temperature: 10/25 Celsius | |
Min/Max Temperature Limit: 5/70 Celsius | |
Temperature History Size (Index): 128 (20) | |
Index Estimated Time Temperature Celsius | |
21 2021-12-18 06:31 ? - | |
... ..(105 skipped). .. - | |
127 2021-12-22 14:45 ? - | |
0 2021-12-22 15:44 36 ***************** | |
1 2021-12-22 16:43 ? - | |
2 2021-12-22 17:42 27 ******** | |
3 2021-12-22 18:41 ? - | |
4 2021-12-22 19:40 27 ******** | |
5 2021-12-22 20:39 ? - | |
6 2021-12-22 21:38 27 ******** | |
7 2021-12-22 22:37 ? - | |
8 2021-12-22 23:36 28 ********* | |
9 2021-12-23 00:35 ? - | |
10 2021-12-23 01:34 28 ********* | |
11 2021-12-23 02:33 ? - | |
12 2021-12-23 03:32 29 ********** | |
13 2021-12-23 04:31 ? - | |
14 2021-12-23 05:30 30 *********** | |
15 2021-12-23 06:29 ? - | |
16 2021-12-23 07:28 24 ***** | |
17 2021-12-23 08:27 ? - | |
18 2021-12-23 09:26 24 ***** | |
19 2021-12-23 10:25 ? - | |
20 2021-12-23 11:24 26 ******* | |
SCT Error Recovery Control: | |
Read: 70 (7.0 seconds) | |
Write: 70 (7.0 seconds) | |
Device Statistics (GP Log 0x04) | |
Page Offset Size Value Flags Description | |
0x01 ===== = = === == General Statistics (rev 1) == | |
0x01 0x008 4 10 --- Lifetime Power-On Resets | |
0x01 0x010 4 0 --- Power-on Hours | |
0x01 0x018 6 384038 --- Logical Sectors Written | |
0x01 0x020 6 5861 --- Number of Write Commands | |
0x01 0x028 6 3515113 --- Logical Sectors Read | |
0x01 0x030 6 34859 --- Number of Read Commands | |
0x01 0x038 6 - --- Date and Time TimeStamp | |
0x03 ===== = = === == Rotating Media Statistics (rev 1) == | |
0x03 0x008 4 0 --- Spindle Motor Power-on Hours | |
0x03 0x010 4 0 --- Head Flying Hours | |
0x03 0x018 4 10 --- Head Load Events | |
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors | |
0x03 0x028 4 0 --- Read Recovery Attempts | |
0x03 0x030 4 0 --- Number of Mechanical Start Failures | |
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors | |
0x03 0x040 4 2 --- Number of High Priority Unload Events | |
0x04 ===== = = === == General Errors Statistics (rev 1) == | |
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors | |
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion | |
0x04 0x018 4 0 -D- Physical Element Status Changed | |
0x05 ===== = = === == Temperature Statistics (rev 1) == | |
0x05 0x008 1 32 --- Current Temperature | |
0x05 0x010 1 - --- Average Short Term Temperature | |
0x05 0x018 1 - --- Average Long Term Temperature | |
0x05 0x020 1 32 --- Highest Temperature | |
0x05 0x028 1 24 --- Lowest Temperature | |
0x05 0x030 1 - --- Highest Average Short Term Temperature | |
0x05 0x038 1 - --- Lowest Average Short Term Temperature | |
0x05 0x040 1 - --- Highest Average Long Term Temperature | |
0x05 0x048 1 - --- Lowest Average Long Term Temperature | |
0x05 0x050 4 0 --- Time in Over-Temperature | |
0x05 0x058 1 70 --- Specified Maximum Operating Temperature | |
0x05 0x060 4 0 --- Time in Under-Temperature | |
0x05 0x068 1 5 --- Specified Minimum Operating Temperature | |
0x06 ===== = = === == Transport Statistics (rev 1) == | |
0x06 0x008 4 0 --- Number of Hardware Resets | |
0x06 0x010 4 0 --- Number of ASR Events | |
0x06 0x018 4 0 --- Number of Interface CRC Errors | |
0xff ===== = = === == Vendor Specific Statistics (rev 1) == | |
0xff 0x010 7 0 --- Vendor Specific | |
0xff 0x018 7 0 --- Vendor Specific | |
|||_ C monitored condition met | |
||__ D supports DSN | |
|___ N normalized value | |
Pending Defects log (GP Log 0x0c) | |
No Defects Logged | |
SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x0001 2 0 Command failed due to ICRC error | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment