Harold2017

Add language resource to App.axml:

<Application.Resources>
        <ResourceDictionary>
            <ResourceDictionary.MergedDictionaries>
                <ResourceInclude Source="avares://MyAssembly/Assets/Languages/Lang.ENG.xaml"></ResourceInclude>
            </ResourceDictionary.MergedDictionaries>
        </ResourceDictionary>
</Application.Resources>

boypt

StatsService API获得数据统计功能，配置里面必须满足以下条件

1. `"stats":{}`对象的存在
2. `"api"`配置对象里面有`StatsService`
3. `"policy"`中的统计开关为true，除了各个用户的统计，还有全局统计
4. clients里面要有email
5. 有个专用的`dokodemo-door`协议的入口，tag为api
6. routing里面有inboundTag:api -> outboundTag:api的规则

另外：

rfk

#
#  This is a little script to populate Firefox Sync with
#  fake password records.  Use it like so:
#
#    $> pip install PyFxA syncclient cryptography
#    $> python ./upload_fake_passwords.py 20
#
#  It will prompt for your Firefox Account email address and
#  password, generate and upload 20 fake password records, then
#  sync down and print all password records stored in sync.

thirteen37

This describes my basic Arch Linux installation on my Chromebook Pixel.

Note: I'm a coward, so I installed Arch to an SD card instead of wiping out the existing SSD.

Requirements

• SD card. A very minimal Arch installation with XFCE will need about 2GB, so I think 4GB is the minimum you can get by with.
• Arch installer on a USB drive. The 2013.05.01 is broken with the recent netctl change. So either get an older or newer one.
• Some Arch Linux familiarity.
• Time, patience, and good eyesight.

joergschiller

Howto Enable and Use A2DP Sink on Ubuntu Linux with Bluez

1. Add Enable=Source to /etc/bluetooth/audio.conf right after [General].

2. Find address in form XX:XX:XX:XX:XX:XX of phone with hcitool scan.

3. Pair and trust smartphone with sudo bluez-simple-agent hci0 XX:XX:XX:XX:XX:XX and sudo bluez-test-device trusted XX:XX:XX:XX:XX:XX yes.

4. Create loopback in pulseaudio connection bluetooth a2dp source with alsa sink: