ESPHOME config for MOES 2 Gang WiFi Dimmer

dimmer-modded-rocker.yaml

substitutions:
  device_name: 2-gang-dimmer
  device_description: MOES 2 Gang WiFi Dimmer
  friendly_name: Living Room Dimmer

esphome:
  name: ${device_name}
  comment: ${device_description}
  
esp8266:
  board: esp01_1m
  restore_from_flash: true

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  fast_connect: true
  #use_address: "x.x.x.x"

  ap: #AP mode if no WiFi connection could be made
    ssid: ${friendly_name} AP
    password: !secret ap_password

captive_portal:

web_server:
  port: 80
  auth:
    username: !secret web_server_username
    password: !secret web_server_password

# Make sure logging is not using the serial port
logger:
  baud_rate: 0
  
uart:
  rx_pin: GPIO3
  tx_pin: GPIO1
  baud_rate: 9600

time:
  - platform: homeassistant
    id: homeassistant_time

# Register the Tuya MCU connection
tuya:
  time_id: homeassistant_time

api:
  password: !secret api_password

ota:
  password: !secret ota_password


#[14:58:28][C][tuya:041]: Datapoint 6: int value (value: 0)
#[14:58:28][C][tuya:041]: Datapoint 12: int value (value: 0)

#[14:58:54][D][tuya:255]: Datapoint 1 update to OFF
#[14:58:54][D][tuya:263]: Datapoint 2 update to 1000

#[14:59:26][D][tuya:255]: Datapoint 7 update to OFF
#[14:59:26][D][tuya:263]: Datapoint 8 update to 1000

light:
  - platform: "tuya"
    id: light_switch1
    name: ${friendly_name} 1
    dimmer_datapoint: 2
    #min_value_datapoint: 2
    switch_datapoint: 1
    min_value: 0
    max_value: 1000

  - platform: "tuya"
    id: light_switch2
    name: ${friendly_name} 2
    dimmer_datapoint: 8
    min_value: 0
    max_value: 1000
    #min_value_datapoint: 2
    switch_datapoint: 7

binary_sensor:
  - platform: status
    name: ${device_name} HA connection status

  - platform: gpio
    pin: GPIO04
    id: button
    internal: true
    filters:
      - delayed_on_off: 50ms
    on_state:
      - light.toggle: light_switch1

  - platform: gpio
    pin: GPIO05
    id: switch_input
    internal: true
    filters:
      - delayed_on_off: 50ms
    on_state:
        - light.toggle: light_switch2

dimmer.yaml

substitutions:
  device_name: 2-gang-dimmer
  device_description: MOES 2 Gang WiFi Dimmer
  friendly_name: Living Room Dimmer

esphome:
  name: ${device_name}
  comment: ${device_description}
  
esp8266:
  board: esp01_1m
  restore_from_flash: true

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  fast_connect: true
  #use_address: "x.x.x.x"

  ap: #AP mode if no WiFi connection could be made
    ssid: ${friendly_name} AP
    password: !secret ap_password

captive_portal:

web_server:
  port: 80
  auth:
    username: !secret web_server_username
    password: !secret web_server_password

# Make sure logging is not using the serial port
logger:
  baud_rate: 0
  
uart:
  rx_pin: GPIO3
  tx_pin: GPIO1
  baud_rate: 9600

time:
  - platform: homeassistant
    id: homeassistant_time

# Register the Tuya MCU connection
tuya:
  time_id: homeassistant_time

api:
  password: !secret api_password

ota:
  password: !secret ota_password


#[14:58:28][C][tuya:041]: Datapoint 6: int value (value: 0)
#[14:58:28][C][tuya:041]: Datapoint 12: int value (value: 0)

#[14:58:54][D][tuya:255]: Datapoint 1 update to OFF
#[14:58:54][D][tuya:263]: Datapoint 2 update to 1000

#[14:59:26][D][tuya:255]: Datapoint 7 update to OFF
#[14:59:26][D][tuya:263]: Datapoint 8 update to 1000

light:
  - platform: "tuya"
    name: ${friendly_name} 1
    dimmer_datapoint: 2
    #min_value_datapoint: 2
    switch_datapoint: 1
    min_value: 0
    max_value: 1000

  - platform: "tuya"
    name: ${friendly_name} 2
    dimmer_datapoint: 8
    min_value: 0
    max_value: 1000
    #min_value_datapoint: 2
    switch_datapoint: 7