Created
June 19, 2018 00:15
-
-
Save chocopuff2020/4ce8c3a629bcf202174d82875ec5cc64 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| 199 # | |
| httpd not running, trying to start | |
| (13)Permission denied: AH00072: make_sock: could not bind to address [::]:80 | |
| (13)Permission denied: AH00072: make_sock: could not bind to address 0.0.0.0:80 | |
| no listening sockets available, shutting down | |
| AH00015: Unable to open logs | |
| mdai@scml-mdai:~_www|⇒ sudo vi /private/etc/apache2/httpd.conf | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl restart | |
| mdai@scml-mdai:~_www|⇒ sudo vi /private/etc/apache2/httpd.conf | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl restart | |
| mdai@scml-mdai:~_www|⇒ sudo vi /private/etc/apache2/httpd.conf | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl congigtest | |
| Usage: /usr/sbin/httpd [-D name] [-d directory] [-f file] | |
| [-C "directive"] [-c "directive"] | |
| [-k start|restart|graceful|graceful-stop|stop] | |
| [-v] [-V] [-h] [-l] [-L] [-t] [-T] [-S] [-X] | |
| Options: | |
| -D name : define a name for use in <IfDefine name> directives | |
| -d directory : specify an alternate initial ServerRoot | |
| -f file : specify an alternate ServerConfigFile | |
| -C "directive" : process directive before reading config files | |
| -c "directive" : process directive after reading config files | |
| -e level : show startup errors of level (see LogLevel) | |
| -E file : log startup errors to file | |
| -v : show version number | |
| -V : show compile settings | |
| -h : list available command line options (this page) | |
| -l : list compiled in modules | |
| -L : list available configuration directives | |
| -t -D DUMP_VHOSTS : show parsed vhost settings | |
| -t -D DUMP_RUN_CFG : show parsed run settings | |
| -S : a synonym for -t -D DUMP_VHOSTS -D DUMP_RUN_CFG | |
| -t -D DUMP_MODULES : show all loaded modules | |
| -M : a synonym for -t -D DUMP_MODULES | |
| -t -D DUMP_INCLUDES: show all included configuration files | |
| -t : run syntax check for config files | |
| -T : start without DocumentRoot(s) check | |
| -X : debug mode (only one worker, do not detach) | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl configtest | |
| AH00526: Syntax error on line 224 of /private/etc/apache2/httpd.conf: | |
| Invalid command '\xe2\x80\x82\xe2\x80\x82\xe2\x80\x82\xe2\x80\x82AllowOverride', perhaps misspelled or defined by a module not included in the server configuration | |
| mdai@scml-mdai:~_www|⇒ sudo vi /private/etc/apache2/httpd.conf | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl configtest | |
| AH00526: Syntax error on line 224 of /private/etc/apache2/httpd.conf: | |
| Invalid command '\xe2\x80\x82\xe2\x80\x82\xe2\x80\x82\xe2\x80\x82AllowOverride', perhaps misspelled or defined by a module not included in the server configuration | |
| mdai@scml-mdai:~_www|⇒ sudo vi /private/etc/apache2/httpd.conf | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl configtest | |
| AH00526: Syntax error on line 224 of /private/etc/apache2/httpd.conf: | |
| Invalid command '\xe2\x80\x82\xe2\x80\x82\xe2\x80\x82\xe2\x80\x82AllowOverride', perhaps misspelled or defined by a module not included in the server configuration | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl restart | |
| mdai@scml-mdai:~_www|⇒ sudo vi /private/etc/apache2/httpd.conf | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl restart | |
| mdai@scml-mdai:~_www|⇒ sudo vi /private/etc/apache2/httpd.conf | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl restart | |
| mdai@scml-mdai:~_www|⇒ brew upgrade | |
| Updating Homebrew... | |
| ==> Auto-updated Homebrew! | |
| Updated 1 tap (homebrew/core). | |
| ==> New Formulae | |
| openapi-generator | |
| ==> Updated Formulae | |
| gdbm ✔ convox draco gcovr imagemagick libphonenumber packmol rclone srt wtf | |
| openssl ✔ cppcheck esniper geckodriver imagemagick@6 macvim pipenv ruby-build stern xmake | |
| python ✔ crystal-lang etcd gnu-smalltalk jenkins mitmproxy pkcs11-helper saltstack tectonic xonsh | |
| annie datomic etsh grails jenkins-job-builder modules planck seqtk terragrunt youtube-dl | |
| ansible-lint davix ffmpeg gspell kaitai-struct-compiler nzbget pony-stable simutrans traefik | |
| awscli dcm2niix fluent-bit gtksourceview3 krakend octave pre-commit sip twarc | |
| bitcoin diffoscope folly gtksourceview@4 kubeless offlineimap pypy sourcekitten urh | |
| blackbox direnv fwup hadolint libheif openfortivpn python@2 sourcery vim@7.4 | |
| clojurescript docker-machine gauge hlint libpeas pacapt quicktype spotbugs wpscan | |
| ==> Upgrading 12 outdated packages, with result: | |
| fd 6.3.0 -> 7.0.0, gdbm 1.14.1_1 -> 1.15, git 2.16.1 -> 2.17.1, icu4c 60.2 -> 61.1, node 9.4.0 -> 10.4.1, openssl 1.0.2n -> 1.0.2o_2, perl 5.26.1 -> 5.26.2, python 2.7.14_2 -> 3.6.5_1, ruby 2.5.0 -> 2.5.1, sqlite 3.22.0 -> 3.24.0, vim 8.0.1400_4 -> 8.1.0050, zsh 5.4.2_3 -> 5.5.1 | |
| ==> Upgrading sqlite | |
| ==> Downloading https://homebrew.bintray.com/bottles/sqlite-3.24.0.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring sqlite-3.24.0.sierra.bottle.tar.gz | |
| ==> Caveats | |
| This formula is keg-only, which means it was not symlinked into /usr/local, | |
| because macOS provides an older sqlite3. | |
| If you need to have this software first in your PATH run: | |
| echo 'export PATH="/usr/local/opt/sqlite/bin:$PATH"' >> ~/.zshrc | |
| For compilers to find this software you may need to set: | |
| LDFLAGS: -L/usr/local/opt/sqlite/lib | |
| CPPFLAGS: -I/usr/local/opt/sqlite/include | |
| ==> Summary | |
| 🍺 /usr/local/Cellar/sqlite/3.24.0: 11 files, 3.5MB | |
| ==> Upgrading openssl | |
| ==> Downloading https://homebrew.bintray.com/bottles/openssl-1.0.2o_2.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring openssl-1.0.2o_2.sierra.bottle.tar.gz | |
| ==> Caveats | |
| A CA file has been bootstrapped using certificates from the SystemRoots | |
| keychain. To add additional certificates (e.g. the certificates added in | |
| the System keychain), place .pem files in | |
| /usr/local/etc/openssl/certs | |
| and run | |
| /usr/local/opt/openssl/bin/c_rehash | |
| This formula is keg-only, which means it was not symlinked into /usr/local, | |
| because Apple has deprecated use of OpenSSL in favor of its own TLS and crypto libraries. | |
| If you need to have this software first in your PATH run: | |
| echo 'export PATH="/usr/local/opt/openssl/bin:$PATH"' >> ~/.zshrc | |
| For compilers to find this software you may need to set: | |
| LDFLAGS: -L/usr/local/opt/openssl/lib | |
| CPPFLAGS: -I/usr/local/opt/openssl/include | |
| ==> Summary | |
| 🍺 /usr/local/Cellar/openssl/1.0.2o_2: 1,792 files, 12.3MB | |
| ==> Upgrading icu4c | |
| ==> Downloading https://homebrew.bintray.com/bottles/icu4c-61.1.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring icu4c-61.1.sierra.bottle.tar.gz | |
| ==> Caveats | |
| This formula is keg-only, which means it was not symlinked into /usr/local, | |
| because macOS provides libicucore.dylib (but nothing else). | |
| If you need to have this software first in your PATH run: | |
| echo 'export PATH="/usr/local/opt/icu4c/bin:$PATH"' >> ~/.zshrc | |
| echo 'export PATH="/usr/local/opt/icu4c/sbin:$PATH"' >> ~/.zshrc | |
| For compilers to find this software you may need to set: | |
| LDFLAGS: -L/usr/local/opt/icu4c/lib | |
| CPPFLAGS: -I/usr/local/opt/icu4c/include | |
| ==> Summary | |
| 🍺 /usr/local/Cellar/icu4c/61.1: 249 files, 67.2MB | |
| ==> Upgrading node | |
| ==> Downloading https://homebrew.bintray.com/bottles/node-10.4.1.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring node-10.4.1.sierra.bottle.tar.gz | |
| ==> Caveats | |
| Bash completion has been installed to: | |
| /usr/local/etc/bash_completion.d | |
| ==> Summary | |
| 🍺 /usr/local/Cellar/node/10.4.1: 6,793 files, 59.8MB | |
| ==> Upgrading perl | |
| ==> Downloading https://homebrew.bintray.com/bottles/perl-5.26.2.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring perl-5.26.2.sierra.bottle.tar.gz | |
| ==> Caveats | |
| By default non-brewed cpan modules are installed to the Cellar. If you wish | |
| for your modules to persist across updates we recommend using `local::lib`. | |
| You can set that up like this: | |
| PERL_MM_OPT="INSTALL_BASE=$HOME/perl5" cpan local::lib | |
| echo 'eval "$(perl -I$HOME/perl5/lib/perl5 -Mlocal::lib=$HOME/perl5)"' >> ~/.zshrc | |
| ==> Summary | |
| 🍺 /usr/local/Cellar/perl/5.26.2: 2,399 files, 57.2MB | |
| ==> Upgrading python | |
| ==> Installing dependencies for python: gdbm, xz | |
| ==> Installing python dependency: gdbm | |
| ==> Downloading https://homebrew.bintray.com/bottles/gdbm-1.15.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring gdbm-1.15.sierra.bottle.tar.gz | |
| 🍺 /usr/local/Cellar/gdbm/1.15: 19 files, 569.8KB | |
| ==> Installing python dependency: xz | |
| ==> Downloading https://homebrew.bintray.com/bottles/xz-5.2.4.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring xz-5.2.4.sierra.bottle.tar.gz | |
| 🍺 /usr/local/Cellar/xz/5.2.4: 92 files, 1MB | |
| ==> Installing python | |
| ==> Downloading https://homebrew.bintray.com/bottles/python-3.6.5_1.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring python-3.6.5_1.sierra.bottle.tar.gz | |
| ==> /usr/local/Cellar/python/3.6.5_1/bin/python3 -s setup.py --no-user-cfg install --force --verbose --install-scripts=/usr/local/Cellar/python/3.6.5_1/bin --install-lib=/usr/local/lib/python3.6/site-packages --single-version-externally-m | |
| ==> /usr/local/Cellar/python/3.6.5_1/bin/python3 -s setup.py --no-user-cfg install --force --verbose --install-scripts=/usr/local/Cellar/python/3.6.5_1/bin --install-lib=/usr/local/lib/python3.6/site-packages --single-version-externally-m | |
| ==> /usr/local/Cellar/python/3.6.5_1/bin/python3 -s setup.py --no-user-cfg install --force --verbose --install-scripts=/usr/local/Cellar/python/3.6.5_1/bin --install-lib=/usr/local/lib/python3.6/site-packages --single-version-externally-m | |
| ==> Caveats | |
| Python has been installed as | |
| /usr/local/bin/python3 | |
| Unversioned symlinks `python`, `python-config`, `pip` etc. pointing to | |
| `python3`, `python3-config`, `pip3` etc., respectively, have been installed into | |
| /usr/local/opt/python/libexec/bin | |
| If you need Homebrew's Python 2.7 run | |
| brew install python@2 | |
| Pip, setuptools, and wheel have been installed. To update them run | |
| pip3 install --upgrade pip setuptools wheel | |
| You can install Python packages with | |
| pip3 install <package> | |
| They will install into the site-package directory | |
| /usr/local/lib/python3.6/site-packages | |
| See: https://docs.brew.sh/Homebrew-and-Python | |
| ==> Summary | |
| 🍺 /usr/local/Cellar/python/3.6.5_1: 4,740 files, 99.2MB | |
| ==> Upgrading ruby | |
| ==> Downloading https://homebrew.bintray.com/bottles/ruby-2.5.1.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring ruby-2.5.1.sierra.bottle.tar.gz | |
| Error: The `brew link` step did not complete successfully | |
| The formula built, but is not symlinked into /usr/local | |
| Could not symlink bin/rake | |
| Target /usr/local/bin/rake | |
| already exists. You may want to remove it: | |
| rm '/usr/local/bin/rake' | |
| 1 # | |
| 2 # This is the main Apache HTTP server configuration file. It contains the | |
| 3 # configuration directives that give the server its instructions. | |
| 4 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. | |
| 5 # In particular, see | |
| 6 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> | |
| 7 # for a discussion of each configuration directive. | |
| 8 # | |
| 9 # Do NOT simply read the instructions in here without understanding | |
| 10 # what they do. They're here only as hints or reminders. If you are unsure | |
| 11 # consult the online docs. You have been warned. | |
| 12 # | |
| 13 # Configuration and logfile names: If the filenames you specify for many | |
| 14 # of the server's control files begin with "/" (or "drive:/" for Win32), the | |
| 15 # server will use that explicit path. If the filenames do *not* begin | |
| 16 # with "/", the value of ServerRoot is prepended -- so "logs/access_log" | |
| 17 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the | |
| 18 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" | |
| 19 # will be interpreted as '/logs/access_log'. | |
| 20 | |
| 21 # | |
| 22 # ServerRoot: The top of the directory tree under which the server's | |
| 23 # configuration, error, and log files are kept. | |
| 24 # | |
| 25 # Do not add a slash at the end of the directory path. If you point | |
| 26 # ServerRoot at a non-local disk, be sure to specify a local disk on the | |
| 27 # Mutex directive, if file-based mutexes are used. If you wish to share the | |
| 28 # same ServerRoot for multiple httpd daemons, you will need to change at | |
| 29 # least PidFile. | |
| 30 # | |
| 31 ServerRoot "/usr" | |
| 32 | |
| 33 # | |
| 34 # Mutex: Allows you to set the mutex mechanism and mutex file directory | |
| 35 # for individual mutexes, or change the global defaults | |
| 36 # | |
| 37 # Uncomment and change the directory if mutexes are file-based and the default | |
| 38 # mutex file directory is not on a local disk or is not appropriate for some | |
| 39 # other reason. | |
| 40 # | |
| 41 # Mutex default:/private/var/run | |
| 42 | |
| 43 # | |
| 44 # Listen: Allows you to bind Apache to specific IP addresses and/or | |
| 45 # ports, instead of the default. See also the <VirtualHost> | |
| 46 # directive. | |
| 47 # | |
| 48 # Change this to Listen on specific IP addresses as shown below to | |
| 49 # prevent Apache from glomming onto all bound IP addresses. | |
| 50 # | |
| 51 #Listen 12.34.56.78:80 | |
| 52 Listen 80 | |
| "/private/etc/apache2/httpd.conf" 540L, 20898C | |
| 199 # | |
| To force the link and overwrite all conflicting files: | |
| brew link --overwrite ruby | |
| To list all files that would be deleted: | |
| brew link --overwrite --dry-run ruby | |
| Possible conflicting files are: | |
| /usr/local/bin/rake | |
| ==> Caveats | |
| Emacs Lisp files have been installed to: | |
| /usr/local/share/emacs/site-lisp/ruby | |
| ==> Summary | |
| 🍺 /usr/local/Cellar/ruby/2.5.1: 16,227 files, 27.5MB | |
| ==> Upgrading vim | |
| ==> Downloading https://homebrew.bintray.com/bottles/vim-8.1.0050.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring vim-8.1.0050.sierra.bottle.tar.gz | |
| 🍺 /usr/local/Cellar/vim/8.1.0050: 1,432 files, 23.3MB | |
| ==> Upgrading fd | |
| ==> Downloading https://homebrew.bintray.com/bottles/fd-7.0.0.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring fd-7.0.0.sierra.bottle.tar.gz | |
| ==> Caveats | |
| Bash completion has been installed to: | |
| /usr/local/etc/bash_completion.d | |
| zsh completions have been installed to: | |
| /usr/local/share/zsh/site-functions | |
| ==> Summary | |
| 🍺 /usr/local/Cellar/fd/7.0.0: 9 files, 3MB | |
| ==> Upgrading zsh | |
| ==> Downloading https://homebrew.bintray.com/bottles/zsh-5.5.1.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring zsh-5.5.1.sierra.bottle.tar.gz | |
| 🍺 /usr/local/Cellar/zsh/5.5.1: 1,444 files, 12MB | |
| ==> Upgrading git | |
| 1 # | |
| 2 # This is the main Apache HTTP server configuration file. It contains the | |
| 3 # configuration directives that give the server its instructions. | |
| 4 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. | |
| 5 # In particular, see | |
| 6 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> | |
| 7 # for a discussion of each configuration directive. | |
| 8 # | |
| 9 # Do NOT simply read the instructions in here without understanding | |
| 10 # what they do. They're here only as hints or reminders. If you are unsure | |
| 11 # consult the online docs. You have been warned. | |
| 12 # | |
| 13 # Configuration and logfile names: If the filenames you specify for many | |
| 14 # of the server's control files begin with "/" (or "drive:/" for Win32), the | |
| 15 # server will use that explicit path. If the filenames do *not* begin | |
| 16 # with "/", the value of ServerRoot is prepended -- so "logs/access_log" | |
| 17 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the | |
| 18 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" | |
| 19 # will be interpreted as '/logs/access_log'. | |
| 20 | |
| 21 # | |
| 22 # ServerRoot: The top of the directory tree under which the server's | |
| 23 # configuration, error, and log files are kept. | |
| 24 # | |
| 25 # Do not add a slash at the end of the directory path. If you point | |
| 26 # ServerRoot at a non-local disk, be sure to specify a local disk on the | |
| 27 # Mutex directive, if file-based mutexes are used. If you wish to share the | |
| 28 # same ServerRoot for multiple httpd daemons, you will need to change at | |
| 29 # least PidFile. | |
| 30 # | |
| 31 ServerRoot "/usr" | |
| 32 | |
| 33 # | |
| 34 # Mutex: Allows you to set the mutex mechanism and mutex file directory | |
| 35 # for individual mutexes, or change the global defaults | |
| 36 # | |
| 37 # Uncomment and change the directory if mutexes are file-based and the default | |
| 38 # mutex file directory is not on a local disk or is not appropriate for some | |
| 39 # other reason. | |
| 40 # | |
| 41 # Mutex default:/private/var/run | |
| 42 | |
| 43 # | |
| 44 # Listen: Allows you to bind Apache to specific IP addresses and/or | |
| 45 # ports, instead of the default. See also the <VirtualHost> | |
| 46 # directive. | |
| 47 # | |
| 48 # Change this to Listen on specific IP addresses as shown below to | |
| 49 # prevent Apache from glomming onto all bound IP addresses. | |
| 50 # | |
| 51 #Listen 12.34.56.78:80 | |
| 52 Listen 80 | |
| "/private/etc/apache2/httpd.conf" 543L, 21000C | |
| 199 # | |
| ==> Downloading https://homebrew.bintray.com/bottles/git-2.17.1.sierra.bottle.tar.gz | |
| ######################################################################## 100.0% | |
| ==> Pouring git-2.17.1.sierra.bottle.tar.gz | |
| ==> Caveats | |
| 1 # | |
| 2 # This is the main Apache HTTP server configuration file. It contains the | |
| 3 # configuration directives that give the server its instructions. | |
| 4 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. | |
| 5 # In particular, see | |
| 6 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> | |
| 7 # for a discussion of each configuration directive. | |
| 8 # | |
| 9 # Do NOT simply read the instructions in here without understanding | |
| 10 # what they do. They're here only as hints or reminders. If you are unsure | |
| 11 # consult the online docs. You have been warned. | |
| 12 # | |
| 13 # Configuration and logfile names: If the filenames you specify for many | |
| 14 # of the server's control files begin with "/" (or "drive:/" for Win32), the | |
| 15 # server will use that explicit path. If the filenames do *not* begin | |
| 16 # with "/", the value of ServerRoot is prepended -- so "logs/access_log" | |
| 17 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the | |
| 18 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" | |
| 19 # will be interpreted as '/logs/access_log'. | |
| 20 | |
| 21 # | |
| 22 # ServerRoot: The top of the directory tree under which the server's | |
| 23 # configuration, error, and log files are kept. | |
| 24 # | |
| 25 # Do not add a slash at the end of the directory path. If you point | |
| 26 # ServerRoot at a non-local disk, be sure to specify a local disk on the | |
| 27 # Mutex directive, if file-based mutexes are used. If you wish to share the | |
| 28 # same ServerRoot for multiple httpd daemons, you will need to change at | |
| 29 # least PidFile. | |
| 30 # | |
| 31 ServerRoot "/usr" | |
| 32 | |
| 33 # | |
| 34 # Mutex: Allows you to set the mutex mechanism and mutex file directory | |
| 35 # for individual mutexes, or change the global defaults | |
| 36 # | |
| 37 # Uncomment and change the directory if mutexes are file-based and the default | |
| 38 # mutex file directory is not on a local disk or is not appropriate for some | |
| 39 # other reason. | |
| 40 # | |
| 41 # Mutex default:/private/var/run | |
| 42 | |
| 43 # | |
| 44 # Listen: Allows you to bind Apache to specific IP addresses and/or | |
| 45 # ports, instead of the default. See also the <VirtualHost> | |
| 46 # directive. | |
| 47 # | |
| 48 # Change this to Listen on specific IP addresses as shown below to | |
| 49 # prevent Apache from glomming onto all bound IP addresses. | |
| 50 # | |
| 51 #Listen 12.34.56.78:80 | |
| 52 Listen 80 | |
| "/private/etc/apache2/httpd.conf" 543L, 21001C | |
| 199 # | |
| Bash completion has been installed to: | |
| /usr/local/etc/bash_completion.d | |
| 1 # | |
| 2 # This is the main Apache HTTP server configuration file. It contains the | |
| 3 # configuration directives that give the server its instructions. | |
| 4 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. | |
| 5 # In particular, see | |
| 6 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> | |
| 7 # for a discussion of each configuration directive. | |
| 8 # | |
| 9 # Do NOT simply read the instructions in here without understanding | |
| 10 # what they do. They're here only as hints or reminders. If you are unsure | |
| 11 # consult the online docs. You have been warned. | |
| 12 # | |
| 13 # Configuration and logfile names: If the filenames you specify for many | |
| 14 # of the server's control files begin with "/" (or "drive:/" for Win32), the | |
| 15 # server will use that explicit path. If the filenames do *not* begin | |
| 16 # with "/", the value of ServerRoot is prepended -- so "logs/access_log" | |
| 17 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the | |
| 18 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" | |
| 19 # will be interpreted as '/logs/access_log'. | |
| 20 | |
| 21 # | |
| 22 # ServerRoot: The top of the directory tree under which the server's | |
| 23 # configuration, error, and log files are kept. | |
| 24 # | |
| 25 # Do not add a slash at the end of the directory path. If you point | |
| 26 # ServerRoot at a non-local disk, be sure to specify a local disk on the | |
| 27 # Mutex directive, if file-based mutexes are used. If you wish to share the | |
| 28 # same ServerRoot for multiple httpd daemons, you will need to change at | |
| 29 # least PidFile. | |
| 30 # | |
| 31 ServerRoot "/usr" | |
| 32 | |
| 33 # | |
| 34 # Mutex: Allows you to set the mutex mechanism and mutex file directory | |
| 35 # for individual mutexes, or change the global defaults | |
| 36 # | |
| 37 # Uncomment and change the directory if mutexes are file-based and the default | |
| 38 # mutex file directory is not on a local disk or is not appropriate for some | |
| 39 # other reason. | |
| 40 # | |
| 41 # Mutex default:/private/var/run | |
| 42 | |
| 43 # | |
| 44 # Listen: Allows you to bind Apache to specific IP addresses and/or | |
| 45 # ports, instead of the default. See also the <VirtualHost> | |
| 46 # directive. | |
| 47 # | |
| 48 # Change this to Listen on specific IP addresses as shown below to | |
| 49 # prevent Apache from glomming onto all bound IP addresses. | |
| 50 # | |
| 51 #Listen 12.34.56.78:80 | |
| 52 Listen 80 | |
| "/private/etc/apache2/httpd.conf" 542L, 20970C | |
| 199 # | |
| zsh completions and functions have been installed to: | |
| /usr/local/share/zsh/site-functions | |
| Emacs Lisp files have been installed to: | |
| 1 # | |
| 2 # This is the main Apache HTTP server configuration file. It contains the | |
| 3 # configuration directives that give the server its instructions. | |
| 4 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. | |
| 5 # In particular, see | |
| 6 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> | |
| 7 # for a discussion of each configuration directive. | |
| 8 # | |
| 9 # Do NOT simply read the instructions in here without understanding | |
| 10 # what they do. They're here only as hints or reminders. If you are unsure | |
| 11 # consult the online docs. You have been warned. | |
| 12 # | |
| 13 # Configuration and logfile names: If the filenames you specify for many | |
| 14 # of the server's control files begin with "/" (or "drive:/" for Win32), the | |
| 15 # server will use that explicit path. If the filenames do *not* begin | |
| 16 # with "/", the value of ServerRoot is prepended -- so "logs/access_log" | |
| 17 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the | |
| 18 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" | |
| 19 # will be interpreted as '/logs/access_log'. | |
| 20 | |
| 21 # | |
| 22 # ServerRoot: The top of the directory tree under which the server's | |
| 23 # configuration, error, and log files are kept. | |
| 24 # | |
| 25 # Do not add a slash at the end of the directory path. If you point | |
| 26 # ServerRoot at a non-local disk, be sure to specify a local disk on the | |
| 27 # Mutex directive, if file-based mutexes are used. If you wish to share the | |
| 28 # same ServerRoot for multiple httpd daemons, you will need to change at | |
| 29 # least PidFile. | |
| 30 # | |
| 31 ServerRoot "/usr" | |
| 32 | |
| 33 # | |
| 34 # Mutex: Allows you to set the mutex mechanism and mutex file directory | |
| 35 # for individual mutexes, or change the global defaults | |
| 36 # | |
| 37 # Uncomment and change the directory if mutexes are file-based and the default | |
| 38 # mutex file directory is not on a local disk or is not appropriate for some | |
| 39 # other reason. | |
| 40 # | |
| 41 # Mutex default:/private/var/run | |
| 42 | |
| 43 # | |
| 44 # Listen: Allows you to bind Apache to specific IP addresses and/or | |
| 45 # ports, instead of the default. See also the <VirtualHost> | |
| 46 # directive. | |
| 47 # | |
| 48 # Change this to Listen on specific IP addresses as shown below to | |
| 49 # prevent Apache from glomming onto all bound IP addresses. | |
| 50 # | |
| 51 #Listen 12.34.56.78:80 | |
| 52 Listen 80 | |
| "/private/etc/apache2/httpd.conf" 542L, 20970C | |
| 199 # | |
| /usr/local/share/emacs/site-lisp/git | |
| ==> Summary | |
| 🍺 /usr/local/Cellar/git/2.17.1: 1,501 files, 35.6MB | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl restart | |
| 1 # | |
| 2 # This is the main Apache HTTP server configuration file. It contains the | |
| 3 # configuration directives that give the server its instructions. | |
| 4 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. | |
| 5 # In particular, see | |
| 6 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> | |
| 7 # for a discussion of each configuration directive. | |
| 8 # | |
| 9 # Do NOT simply read the instructions in here without understanding | |
| 10 # what they do. They're here only as hints or reminders. If you are unsure | |
| 11 # consult the online docs. You have been warned. | |
| 12 # | |
| 13 # Configuration and logfile names: If the filenames you specify for many | |
| 14 # of the server's control files begin with "/" (or "drive:/" for Win32), the | |
| 15 # server will use that explicit path. If the filenames do *not* begin | |
| 16 # with "/", the value of ServerRoot is prepended -- so "logs/access_log" | |
| 17 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the | |
| 18 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" | |
| 19 # will be interpreted as '/logs/access_log'. | |
| 20 | |
| 21 # | |
| 22 # ServerRoot: The top of the directory tree under which the server's | |
| 23 # configuration, error, and log files are kept. | |
| 24 # | |
| 25 # Do not add a slash at the end of the directory path. If you point | |
| 26 # ServerRoot at a non-local disk, be sure to specify a local disk on the | |
| 27 # Mutex directive, if file-based mutexes are used. If you wish to share the | |
| 28 # same ServerRoot for multiple httpd daemons, you will need to change at | |
| 29 # least PidFile. | |
| 30 # | |
| 31 ServerRoot "/usr" | |
| 32 | |
| 33 # | |
| 34 # Mutex: Allows you to set the mutex mechanism and mutex file directory | |
| 35 # for individual mutexes, or change the global defaults | |
| 36 # | |
| 37 # Uncomment and change the directory if mutexes are file-based and the default | |
| 38 # mutex file directory is not on a local disk or is not appropriate for some | |
| 39 # other reason. | |
| 40 # | |
| 41 # Mutex default:/private/var/run | |
| 42 | |
| 43 # | |
| 44 # Listen: Allows you to bind Apache to specific IP addresses and/or | |
| 45 # ports, instead of the default. See also the <VirtualHost> | |
| 46 # directive. | |
| 47 # | |
| 48 # Change this to Listen on specific IP addresses as shown below to | |
| 49 # prevent Apache from glomming onto all bound IP addresses. | |
| 50 # | |
| 51 #Listen 12.34.56.78:80 | |
| 52 Listen 80 | |
| /LoadModule rewrite_module | |
| 143 #LoadModule ssl_module libexec/apache2/mod_ssl.so | |
| mdai@scml-mdai:~_www|⇒ sudo vi /private/etc/apache2/httpd.conf | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl restart | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl start | |
| /System/Library/LaunchDaemons/org.apache.httpd.plist: service already loaded | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl steop | |
| Usage: /usr/sbin/httpd [-D name] [-d directory] [-f file] | |
| [-C "directive"] [-c "directive"] | |
| [-k start|restart|graceful|graceful-stop|stop] | |
| [-v] [-V] [-h] [-l] [-L] [-t] [-T] [-S] [-X] | |
| Options: | |
| -D name : define a name for use in <IfDefine name> directives | |
| -d directory : specify an alternate initial ServerRoot | |
| -f file : specify an alternate ServerConfigFile | |
| -C "directive" : process directive before reading config files | |
| -c "directive" : process directive after reading config files | |
| -e level : show startup errors of level (see LogLevel) | |
| -E file : log startup errors to file | |
| -v : show version number | |
| -V : show compile settings | |
| -h : list available command line options (this page) | |
| -l : list compiled in modules | |
| -L : list available configuration directives | |
| -t -D DUMP_VHOSTS : show parsed vhost settings | |
| -t -D DUMP_RUN_CFG : show parsed run settings | |
| -S : a synonym for -t -D DUMP_VHOSTS -D DUMP_RUN_CFG | |
| -t -D DUMP_MODULES : show all loaded modules | |
| -M : a synonym for -t -D DUMP_MODULES | |
| -t -D DUMP_INCLUDES: show all included configuration files | |
| -t : run syntax check for config files | |
| -T : start without DocumentRoot(s) check | |
| -X : debug mode (only one worker, do not detach) | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl stop | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl start | |
| 1 # | |
| 2 # This is the main Apache HTTP server configuration file. It contains the | |
| 3 # configuration directives that give the server its instructions. | |
| 4 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. | |
| 5 # In particular, see | |
| 6 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> | |
| 7 # for a discussion of each configuration directive. | |
| 8 # | |
| 9 # Do NOT simply read the instructions in here without understanding | |
| 10 # what they do. They're here only as hints or reminders. If you are unsure | |
| 11 # consult the online docs. You have been warned. | |
| 12 # | |
| 13 # Configuration and logfile names: If the filenames you specify for many | |
| 14 # of the server's control files begin with "/" (or "drive:/" for Win32), the | |
| 15 # server will use that explicit path. If the filenames do *not* begin | |
| 16 # with "/", the value of ServerRoot is prepended -- so "logs/access_log" | |
| 17 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the | |
| 18 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" | |
| 19 # will be interpreted as '/logs/access_log'. | |
| 20 | |
| 21 # | |
| 22 # ServerRoot: The top of the directory tree under which the server's | |
| 23 # configuration, error, and log files are kept. | |
| 24 # | |
| 25 # Do not add a slash at the end of the directory path. If you point | |
| 26 # ServerRoot at a non-local disk, be sure to specify a local disk on the | |
| 27 # Mutex directive, if file-based mutexes are used. If you wish to share the | |
| 28 # same ServerRoot for multiple httpd daemons, you will need to change at | |
| 29 # least PidFile. | |
| 30 # | |
| 31 ServerRoot "/usr" | |
| 32 | |
| 33 # | |
| 34 # Mutex: Allows you to set the mutex mechanism and mutex file directory | |
| 35 # for individual mutexes, or change the global defaults | |
| 36 # | |
| 37 # Uncomment and change the directory if mutexes are file-based and the default | |
| 38 # mutex file directory is not on a local disk or is not appropriate for some | |
| 39 # other reason. | |
| 40 # | |
| 41 # Mutex default:/private/var/run | |
| 42 | |
| 43 # | |
| 44 # Listen: Allows you to bind Apache to specific IP addresses and/or | |
| 45 # ports, instead of the default. See also the <VirtualHost> | |
| 46 # directive. | |
| 47 # | |
| 48 # Change this to Listen on specific IP addresses as shown below to | |
| 49 # prevent Apache from glomming onto all bound IP addresses. | |
| 50 # | |
| 51 #Listen 12.34.56.78:80 | |
| 52 Listen 80 | |
| -- VISUAL -- | |
| 491 # necessary. | |
| 492 | |
| 493 # Server-pool management (MPM specific) | |
| 494 Include /private/etc/apache2/extra/httpd-mpm.conf | |
| 495 | |
| 496 # Multi-language error messages | |
| 497 #Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf | |
| 498 | |
| 499 # Fancy directory listings | |
| 500 Include /private/etc/apache2/extra/httpd-autoindex.conf | |
| 501 | |
| 502 # Language settings | |
| 503 #Include /private/etc/apache2/extra/httpd-languages.conf | |
| 504 | |
| 505 # User home directories | |
| 506 #Include /private/etc/apache2/extra/httpd-userdir.conf | |
| 507 | |
| 508 # Real-time info on requests and configuration | |
| 509 #Include /private/etc/apache2/extra/httpd-info.conf | |
| 510 | |
| 511 # Virtual hosts | |
| 512 #Include /private/etc/apache2/extra/httpd-vhosts.conf | |
| 513 | |
| 514 # Local access to the Apache HTTP Server Manual | |
| 515 #Include /private/etc/apache2/extra/httpd-manual.conf | |
| 516 | |
| 517 # Distributed authoring and versioning (WebDAV) | |
| 518 #Include /private/etc/apache2/extra/httpd-dav.conf | |
| 519 | |
| 520 # Various default settings | |
| 521 #Include /private/etc/apache2/extra/httpd-default.conf | |
| 522 | |
| 523 # Configure mod_proxy_html to understand HTML4/XHTML1 | |
| 524 <IfModule proxy_html_module> | |
| 525 Include /private/etc/apache2/extra/proxy-html.conf | |
| 526 </IfModule> | |
| 527 | |
| 528 # Secure (SSL/TLS) connections | |
| 529 #Include /private/etc/apache2/extra/httpd-ssl.conf | |
| 530 # | |
| 531 # Note: The following must must be present to support | |
| 532 # starting without SSL on platforms with no /dev/random equivalent | |
| 533 # but a statically compiled-in mod_ssl. | |
| 534 # | |
| 535 <IfModule ssl_module> | |
| 536 SSLRandomSeed startup builtin | |
| 537 SSLRandomSeed connect builtin | |
| 538 </IfModule> | |
| 539 | |
| 540 Include /private/etc/apache2/other/*.conf | |
| 541 | |
| 542 | |
| 1 # | |
| 2 # This is the main Apache HTTP server configuration file. It contains the | |
| 3 # configuration directives that give the server its instructions. | |
| 4 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. | |
| 5 # In particular, see | |
| 6 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> | |
| 7 # for a discussion of each configuration directive. | |
| 8 # | |
| 9 # Do NOT simply read the instructions in here without understanding | |
| 10 # what they do. They're here only as hints or reminders. If you are unsure | |
| 11 # consult the online docs. You have been warned. | |
| 12 # | |
| 13 # Configuration and logfile names: If the filenames you specify for many | |
| 14 # of the server's control files begin with "/" (or "drive:/" for Win32), the | |
| 15 # server will use that explicit path. If the filenames do *not* begin | |
| 16 # with "/", the value of ServerRoot is prepended -- so "logs/access_log" | |
| 17 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the | |
| 18 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" | |
| 19 # will be interpreted as '/logs/access_log'. | |
| 20 | |
| 21 # | |
| 22 # ServerRoot: The top of the directory tree under which the server's | |
| 23 # configuration, error, and log files are kept. | |
| 24 # | |
| 25 # Do not add a slash at the end of the directory path. If you point | |
| 26 # ServerRoot at a non-local disk, be sure to specify a local disk on the | |
| 27 # Mutex directive, if file-based mutexes are used. If you wish to share the | |
| 28 # same ServerRoot for multiple httpd daemons, you will need to change at | |
| 29 # least PidFile. | |
| 30 # | |
| 31 ServerRoot "/usr" | |
| 32 | |
| 33 # | |
| 34 # Mutex: Allows you to set the mutex mechanism and mutex file directory | |
| 35 # for individual mutexes, or change the global defaults | |
| 36 # | |
| 37 # Uncomment and change the directory if mutexes are file-based and the default | |
| 38 # mutex file directory is not on a local disk or is not appropriate for some | |
| 39 # other reason. | |
| 40 # | |
| 41 # Mutex default:/private/var/run | |
| 42 | |
| 43 # | |
| 44 # Listen: Allows you to bind Apache to specific IP addresses and/or | |
| 45 # ports, instead of the default. See also the <VirtualHost> | |
| 46 # directive. | |
| 47 # | |
| 48 # Change this to Listen on specific IP addresses as shown below to | |
| 49 # prevent Apache from glomming onto all bound IP addresses. | |
| 50 # | |
| 51 #Listen 12.34.56.78:80 | |
| 52 Listen 80 | |
| 491 # necessary. | |
| 492 | |
| 493 # Server-pool management (MPM specific) | |
| 494 Include /private/etc/apache2/extra/httpd-mpm.conf | |
| 495 | |
| 496 # Multi-language error messages | |
| 497 #Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf | |
| 498 | |
| 499 # Fancy directory listings | |
| 500 Include /private/etc/apache2/extra/httpd-autoindex.conf | |
| 501 | |
| 502 # Language settings | |
| 503 #Include /private/etc/apache2/extra/httpd-languages.conf | |
| 504 | |
| 505 # User home directories | |
| 506 #Include /private/etc/apache2/extra/httpd-userdir.conf | |
| 507 | |
| 508 # Real-time info on requests and configuration | |
| 509 #Include /private/etc/apache2/extra/httpd-info.conf | |
| 510 | |
| 511 # Virtual hosts | |
| 512 #Include /private/etc/apache2/extra/httpd-vhosts.conf | |
| 513 | |
| 514 # Local access to the Apache HTTP Server Manual | |
| 515 #Include /private/etc/apache2/extra/httpd-manual.conf | |
| 516 | |
| 517 # Distributed authoring and versioning (WebDAV) | |
| 518 #Include /private/etc/apache2/extra/httpd-dav.conf | |
| 519 | |
| 520 # Various default settings | |
| 521 #Include /private/etc/apache2/extra/httpd-default.conf | |
| 522 | |
| 523 # Configure mod_proxy_html to understand HTML4/XHTML1 | |
| 524 <IfModule proxy_html_module> | |
| 525 Include /private/etc/apache2/extra/proxy-html.conf | |
| 526 </IfModule> | |
| 527 | |
| 528 # Secure (SSL/TLS) connections | |
| 529 #Include /private/etc/apache2/extra/httpd-ssl.conf | |
| 530 # | |
| 531 # Note: The following must must be present to support | |
| 532 # starting without SSL on platforms with no /dev/random equivalent | |
| 533 # but a statically compiled-in mod_ssl. | |
| 534 # | |
| 535 <IfModule ssl_module> | |
| 536 SSLRandomSeed startup builtin | |
| 537 SSLRandomSeed connect builtin | |
| 538 </IfModule> | |
| 539 | |
| 540 Include /private/etc/apache2/other/*.conf | |
| 541 | |
| 542 | |
| 1 # | |
| 2 # This is the main Apache HTTP server configuration file. It contains the | |
| 3 # configuration directives that give the server its instructions. | |
| 4 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. | |
| 5 # In particular, see | |
| 6 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> | |
| 7 # for a discussion of each configuration directive. | |
| 8 # | |
| 9 # Do NOT simply read the instructions in here without understanding | |
| 10 # what they do. They're here only as hints or reminders. If you are unsure | |
| 11 # consult the online docs. You have been warned. | |
| 12 # | |
| 13 # Configuration and logfile names: If the filenames you specify for many | |
| 14 # of the server's control files begin with "/" (or "drive:/" for Win32), the | |
| 15 # server will use that explicit path. If the filenames do *not* begin | |
| 16 # with "/", the value of ServerRoot is prepended -- so "logs/access_log" | |
| 17 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the | |
| 18 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" | |
| 19 # will be interpreted as '/logs/access_log'. | |
| 20 | |
| 21 # | |
| 22 # ServerRoot: The top of the directory tree under which the server's | |
| 23 # configuration, error, and log files are kept. | |
| 24 # | |
| 25 # Do not add a slash at the end of the directory path. If you point | |
| 26 # ServerRoot at a non-local disk, be sure to specify a local disk on the | |
| 27 # Mutex directive, if file-based mutexes are used. If you wish to share the | |
| 28 # same ServerRoot for multiple httpd daemons, you will need to change at | |
| 29 # least PidFile. | |
| 30 # | |
| 31 ServerRoot "/usr" | |
| 32 | |
| 33 # | |
| 34 # Mutex: Allows you to set the mutex mechanism and mutex file directory | |
| 35 # for individual mutexes, or change the global defaults | |
| 36 # | |
| 37 # Uncomment and change the directory if mutexes are file-based and the default | |
| 38 # mutex file directory is not on a local disk or is not appropriate for some | |
| 39 # other reason. | |
| 40 # | |
| 41 # Mutex default:/private/var/run | |
| 42 | |
| 43 # | |
| 44 # Listen: Allows you to bind Apache to specific IP addresses and/or | |
| 45 # ports, instead of the default. See also the <VirtualHost> | |
| 46 # directive. | |
| 47 # | |
| 48 # Change this to Listen on specific IP addresses as shown below to | |
| 49 # prevent Apache from glomming onto all bound IP addresses. | |
| 50 # | |
| 51 #Listen 12.34.56.78:80 | |
| 52 Listen 80 | |
| -- VISUAL -- | |
| 491 # necessary. | |
| 492 | |
| 493 # Server-pool management (MPM specific) | |
| 494 Include /private/etc/apache2/extra/httpd-mpm.conf | |
| 495 | |
| 496 # Multi-language error messages | |
| 497 #Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf | |
| 498 | |
| 499 # Fancy directory listings | |
| 500 Include /private/etc/apache2/extra/httpd-autoindex.conf | |
| 501 | |
| 502 # Language settings | |
| 503 #Include /private/etc/apache2/extra/httpd-languages.conf | |
| 504 | |
| 505 # User home directories | |
| 506 #Include /private/etc/apache2/extra/httpd-userdir.conf | |
| 507 | |
| 508 # Real-time info on requests and configuration | |
| 509 #Include /private/etc/apache2/extra/httpd-info.conf | |
| 510 | |
| 511 # Virtual hosts | |
| 512 #Include /private/etc/apache2/extra/httpd-vhosts.conf | |
| 513 | |
| 514 # Local access to the Apache HTTP Server Manual | |
| 515 #Include /private/etc/apache2/extra/httpd-manual.conf | |
| 516 | |
| 517 # Distributed authoring and versioning (WebDAV) | |
| 518 #Include /private/etc/apache2/extra/httpd-dav.conf | |
| 519 | |
| 520 # Various default settings | |
| 521 #Include /private/etc/apache2/extra/httpd-default.conf | |
| 522 | |
| 523 # Configure mod_proxy_html to understand HTML4/XHTML1 | |
| 524 <IfModule proxy_html_module> | |
| 525 Include /private/etc/apache2/extra/proxy-html.conf | |
| 526 </IfModule> | |
| 527 | |
| 528 # Secure (SSL/TLS) connections | |
| 529 #Include /private/etc/apache2/extra/httpd-ssl.conf | |
| 530 # | |
| 531 # Note: The following must must be present to support | |
| 532 # starting without SSL on platforms with no /dev/random equivalent | |
| 533 # but a statically compiled-in mod_ssl. | |
| 534 # | |
| 535 <IfModule ssl_module> | |
| 536 SSLRandomSeed startup builtin | |
| 537 SSLRandomSeed connect builtin | |
| 538 </IfModule> | |
| 539 | |
| 540 Include /private/etc/apache2/other/*.conf | |
| 541 | |
| 542 | |
| -- VISUAL -- | |
| 96 #LoadModule echo_module libexec/apache2/mod_echo.so | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl configtest | |
| AH00526: Syntax error on line 224 of /private/etc/apache2/httpd.conf: | |
| Invalid command '\xe2\x80\x82\xe2\x80\x82\xe2\x80\x82\xe2\x80\x82AllowOverride', perhaps misspelled or defined by a module not included in the server configuration | |
| mdai@scml-mdai:~_www|⇒ sudo vi /private/etc/apache2/httpd.conf | |
| 1 # | |
| 2 # This is the main Apache HTTP server configuration file. It contains the | |
| 3 # configuration directives that give the server its instructions. | |
| 4 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. | |
| 5 # In particular, see | |
| 6 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> | |
| 7 # for a discussion of each configuration directive. | |
| 8 # | |
| 9 # Do NOT simply read the instructions in here without understanding | |
| 10 # what they do. They're here only as hints or reminders. If you are unsure | |
| 11 # consult the online docs. You have been warned. | |
| 12 # | |
| 13 # Configuration and logfile names: If the filenames you specify for many | |
| 14 # of the server's control files begin with "/" (or "drive:/" for Win32), the | |
| 15 # server will use that explicit path. If the filenames do *not* begin | |
| 16 # with "/", the value of ServerRoot is prepended -- so "logs/access_log" | |
| 17 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the | |
| 18 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" | |
| 19 # will be interpreted as '/logs/access_log'. | |
| 20 | |
| 21 # | |
| 22 # ServerRoot: The top of the directory tree under which the server's | |
| 23 # configuration, error, and log files are kept. | |
| 24 # | |
| 25 # Do not add a slash at the end of the directory path. If you point | |
| 26 # ServerRoot at a non-local disk, be sure to specify a local disk on the | |
| 27 # Mutex directive, if file-based mutexes are used. If you wish to share the | |
| 28 # same ServerRoot for multiple httpd daemons, you will need to change at | |
| 29 # least PidFile. | |
| 30 # | |
| 31 ServerRoot "/usr" | |
| 32 | |
| 33 # | |
| 34 # Mutex: Allows you to set the mutex mechanism and mutex file directory | |
| 35 # for individual mutexes, or change the global defaults | |
| 36 # | |
| 37 # Uncomment and change the directory if mutexes are file-based and the default | |
| 38 # mutex file directory is not on a local disk or is not appropriate for some | |
| 39 # other reason. | |
| 40 # | |
| 41 # Mutex default:/private/var/run | |
| 42 | |
| 43 # | |
| 44 # Listen: Allows you to bind Apache to specific IP addresses and/or | |
| 45 # ports, instead of the default. See also the <VirtualHost> | |
| 46 # directive. | |
| 47 # | |
| 48 # Change this to Listen on specific IP addresses as shown below to | |
| 49 # prevent Apache from glomming onto all bound IP addresses. | |
| 50 # | |
| 51 #Listen 12.34.56.78:80 | |
| 52 Listen 80 | |
| "/private/etc/apache2/httpd.conf" 542L, 20969C | |
| 199 # | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl configtest | |
| AH00526: Syntax error on line 224 of /private/etc/apache2/httpd.conf: | |
| Invalid command '\xe2\x80\x82\xe2\x80\x82\xe2\x80\x82\xe2\x80\x82#AllowOverride', perhaps misspelled or defined by a module not included in the server configuration | |
| mdai@scml-mdai:~_www|⇒ sudo vi /private/etc/apache2/httpd.conf | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl configtest | |
| Syntax OK | |
| mdai@scml-mdai:~_www|⇒ sudo vi /private/etc/apache2/httpd.conf | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl configtest | |
| Syntax OK | |
| mdai@scml-mdai:~_www|⇒ sudo apachectl restart | |
| 1 # | |
| 2 # This is the main Apache HTTP server configuration file. It contains the | |
| 3 # configuration directives that give the server its instructions. | |
| 4 # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. | |
| 5 # In particular, see | |
| 6 # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> | |
| 7 # for a discussion of each configuration directive. | |
| 8 # | |
| 9 # Do NOT simply read the instructions in here without understanding | |
| 10 # what they do. They're here only as hints or reminders. If you are unsure | |
| 11 # consult the online docs. You have been warned. | |
| 12 # | |
| 13 # Configuration and logfile names: If the filenames you specify for many | |
| 14 # of the server's control files begin with "/" (or "drive:/" for Win32), the | |
| 15 # server will use that explicit path. If the filenames do *not* begin | |
| 16 # with "/", the value of ServerRoot is prepended -- so "logs/access_log" | |
| 17 # with ServerRoot set to "/usr/local/apache2" will be interpreted by the | |
| 18 # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" | |
| 19 # will be interpreted as '/logs/access_log'. | |
| 20 | |
| 21 # | |
| 22 # ServerRoot: The top of the directory tree under which the server's | |
| 23 # configuration, error, and log files are kept. | |
| 24 # | |
| 25 # Do not add a slash at the end of the directory path. If you point | |
| 26 # ServerRoot at a non-local disk, be sure to specify a local disk on the | |
| 27 # Mutex directive, if file-based mutexes are used. If you wish to share the | |
| 28 # same ServerRoot for multiple httpd daemons, you will need to change at | |
| 29 # least PidFile. | |
| 30 # | |
| 31 ServerRoot "/usr" | |
| 32 | |
| 33 # | |
| 34 # Mutex: Allows you to set the mutex mechanism and mutex file directory | |
| 35 # for individual mutexes, or change the global defaults | |
| 36 # | |
| 37 # Uncomment and change the directory if mutexes are file-based and the default | |
| 38 # mutex file directory is not on a local disk or is not appropriate for some | |
| 39 # other reason. | |
| 40 # | |
| 41 # Mutex default:/private/var/run | |
| 42 | |
| 43 # | |
| 44 # Listen: Allows you to bind Apache to specific IP addresses and/or | |
| 45 # ports, instead of the default. See also the <VirtualHost> | |
| 46 # directive. | |
| 47 # | |
| 48 # Change this to Listen on specific IP addresses as shown below to | |
| 49 # prevent Apache from glomming onto all bound IP addresses. | |
| 50 # | |
| 51 #Listen 12.34.56.78:80 | |
| 52 Listen 80 | |
| "/private/etc/apache2/httpd.conf" 542L, 20968C |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment