Created
March 2, 2018 20:42
-
-
Save chrisATautomatemystuff/032ee83bdcdfc0a7b7423ddb71a30cbe to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
<# | |
.SYNOPSIS | |
This script performs the installation or uninstallation of an application(s). | |
.DESCRIPTION | |
The script is provided as a template to perform an install or uninstall of an application(s). | |
The script either performs an "Install" deployment type or an "Uninstall" deployment type. | |
The install deployment type is broken down into 3 main sections/phases: Pre-Install, Install, and Post-Install. | |
The script dot-sources the AppDeployToolkitMain.ps1 script which contains the logic and functions required to install or uninstall an application. | |
.PARAMETER DeploymentType | |
The type of deployment to perform. Default is: Install. | |
.PARAMETER DeployMode | |
Specifies whether the installation should be run in Interactive, Silent, or NonInteractive mode. Default is: Interactive. Options: Interactive = Shows dialogs, Silent = No dialogs, NonInteractive = Very silent, i.e. no blocking apps. NonInteractive mode is automatically set if it is detected that the process is not user interactive. | |
.PARAMETER AllowRebootPassThru | |
Allows the 3010 return code (requires restart) to be passed back to the parent process (e.g. SCCM) if detected from an installation. If 3010 is passed back to SCCM, a reboot prompt will be triggered. | |
.PARAMETER TerminalServerMode | |
Changes to "user install mode" and back to "user execute mode" for installing/uninstalling applications for Remote Destkop Session Hosts/Citrix servers. | |
.PARAMETER DisableLogging | |
Disables logging to file for the script. Default is: $false. | |
.EXAMPLE | |
powershell.exe -Command "& { & '.\Deploy-Application.ps1' -DeployMode 'Silent'; Exit $LastExitCode }" | |
.EXAMPLE | |
powershell.exe -Command "& { & '.\Deploy-Application.ps1' -AllowRebootPassThru; Exit $LastExitCode }" | |
.EXAMPLE | |
powershell.exe -Command "& { & '.\Deploy-Application.ps1' -DeploymentType 'Uninstall'; Exit $LastExitCode }" | |
.EXAMPLE | |
Deploy-Application.exe -DeploymentType "Install" -DeployMode "Silent" | |
.NOTES | |
Toolkit Exit Code Ranges: | |
60000 - 68999: Reserved for built-in exit codes in Deploy-Application.ps1, Deploy-Application.exe, and AppDeployToolkitMain.ps1 | |
69000 - 69999: Recommended for user customized exit codes in Deploy-Application.ps1 | |
70000 - 79999: Recommended for user customized exit codes in AppDeployToolkitExtensions.ps1 | |
.LINK | |
http://psappdeploytoolkit.com | |
#> | |
[CmdletBinding()] | |
Param ( | |
[Parameter(Mandatory=$false)] | |
[ValidateSet('Install','Uninstall')] | |
[string]$DeploymentType = 'Install', | |
[Parameter(Mandatory=$false)] | |
[ValidateSet('Interactive','Silent','NonInteractive')] | |
[string]$DeployMode = 'Interactive', | |
[Parameter(Mandatory=$false)] | |
[switch]$AllowRebootPassThru = $false, | |
[Parameter(Mandatory=$false)] | |
[switch]$TerminalServerMode = $false, | |
[Parameter(Mandatory=$false)] | |
[switch]$DisableLogging = $false | |
) | |
Try { | |
## Set the script execution policy for this process | |
Try { Set-ExecutionPolicy -ExecutionPolicy 'ByPass' -Scope 'Process' -Force -ErrorAction 'Stop' } Catch {} | |
##*=============================================== | |
##* VARIABLE DECLARATION | |
##*=============================================== | |
## Variables: Application | |
[string]$appVendor = 'XYZprinting Inc.' | |
[string]$appName = 'XYZware and XYZmaker' | |
[string]$appVersion = '' | |
[string]$appArch = '' | |
[string]$appLang = 'EN' | |
[string]$appRevision = '01' | |
[string]$appScriptVersion = '1.0.0' | |
[string]$appScriptDate = '10/23/17' | |
[string]$appScriptAuthor = 'Chris Thomas' | |
##*=============================================== | |
## Variables: Install Titles (Only set here to override defaults set by the toolkit) | |
[string]$installName = '' | |
[string]$installTitle = '' | |
##* Do not modify section below | |
#region DoNotModify | |
## Variables: Exit Code | |
[int32]$mainExitCode = 0 | |
## Variables: Script | |
[string]$deployAppScriptFriendlyName = 'Deploy Application' | |
[version]$deployAppScriptVersion = [version]'3.6.8' | |
[string]$deployAppScriptDate = '02/06/2016' | |
[hashtable]$deployAppScriptParameters = $psBoundParameters | |
## Variables: Environment | |
If (Test-Path -LiteralPath 'variable:HostInvocation') { $InvocationInfo = $HostInvocation } Else { $InvocationInfo = $MyInvocation } | |
[string]$scriptDirectory = Split-Path -Path $InvocationInfo.MyCommand.Definition -Parent | |
## Dot source the required App Deploy Toolkit Functions | |
Try { | |
[string]$moduleAppDeployToolkitMain = "$scriptDirectory\AppDeployToolkit\AppDeployToolkitMain.ps1" | |
If (-not (Test-Path -LiteralPath $moduleAppDeployToolkitMain -PathType 'Leaf')) { Throw "Module does not exist at the specified location [$moduleAppDeployToolkitMain]." } | |
If ($DisableLogging) { . $moduleAppDeployToolkitMain -DisableLogging } Else { . $moduleAppDeployToolkitMain } | |
} | |
Catch { | |
If ($mainExitCode -eq 0){ [int32]$mainExitCode = 60008 } | |
Write-Error -Message "Module [$moduleAppDeployToolkitMain] failed to load: `n$($_.Exception.Message)`n `n$($_.InvocationInfo.PositionMessage)" -ErrorAction 'Continue' | |
## Exit the script, returning the exit code to SCCM | |
If (Test-Path -LiteralPath 'variable:HostInvocation') { $script:ExitCode = $mainExitCode; Exit } Else { Exit $mainExitCode } | |
} | |
#endregion | |
##* Do not modify section above | |
##*=============================================== | |
##* END VARIABLE DECLARATION | |
##*=============================================== | |
If ($deploymentType -ine 'Uninstall') { | |
##*=============================================== | |
##* PRE-INSTALLATION | |
##*=============================================== | |
[string]$installPhase = 'Pre-Installation' | |
## Show Welcome Message, close Internet Explorer if required, allow up to 3 deferrals, verify there is enough disk space to complete the install, and persist the prompt | |
Show-InstallationWelcome -AllowDefer -DeferTimes 3 -CheckDiskSpace -PersistPrompt | |
## Show Progress Message (with the default message) | |
Show-InstallationProgress | |
## <Perform Pre-Installation tasks here> | |
##*=============================================== | |
##* INSTALLATION | |
##*=============================================== | |
[string]$installPhase = 'Installation' | |
## Handle Zero-Config MSI Installations | |
If ($useDefaultMsi) { | |
[hashtable]$ExecuteDefaultMSISplat = @{ Action = 'Install'; Path = $defaultMsiFile }; If ($defaultMstFile) { $ExecuteDefaultMSISplat.Add('Transform', $defaultMstFile) } | |
Execute-MSI @ExecuteDefaultMSISplat; If ($defaultMspFiles) { $defaultMspFiles | ForEach-Object { Execute-MSI -Action 'Patch' -Path $_ } } | |
} | |
## <Perform Installation tasks here> | |
Execute-Process -Path "$dirFiles\XYZmaker_1.2_1C5446_windows.exe" -Parameters "/verysilent /norestart" | |
Execute-Process -Path "$dirFiles\XYZware-2.1.24.2.exe" -Parameters "/verysilent /norestart" | |
Execute-Process -Path "$dirFiles\SwAddinXYZprinting_1_0_2(1A7075).exe" -Parameters "/verysilent /norestart" | |
##*=============================================== | |
##* POST-INSTALLATION | |
##*=============================================== | |
[string]$installPhase = 'Post-Installation' | |
## <Perform Post-Installation tasks here> | |
Remove-File -Path "$envPublic\Desktop\XYZmaker.lnk" | |
Remove-File -Path "$envProgramData\Microsoft\Windows\Start Menu\Programs\XYZmaker\Uninstall XYZmaker.lnk" | |
Remove-File -Path "C:\Users\$envUserName\Desktop\XYZware.lnk" | |
Remove-File -Path "$envProgramData\Microsoft\Windows\Start Menu\Programs\XYZware\Uninstall XYZware.lnk" | |
Remove-File -Path "$envProgramData\Microsoft\Windows\Start Menu\Programs\SwAddinXYZprinting\Uninstall SwAddinXYZprinting.lnk" | |
## Display a message at the end of the install | |
If (-not $useDefaultMsi) { | |
If ($DeployMode -ne "Silent") { | |
# Inform the user that the installation has completed | |
Show-InstallationPrompt -Message "$installTitle has completed installation. `n `n If you encounter any issues with this software please call Help Desk at x1215." -Icon "Information" -ButtonMiddleText "OK" -NoWait | |
} | |
} | |
} | |
ElseIf ($deploymentType -ieq 'Uninstall') | |
{ | |
##*=============================================== | |
##* PRE-UNINSTALLATION | |
##*=============================================== | |
[string]$installPhase = 'Pre-Uninstallation' | |
## Show Welcome Message, close Internet Explorer with a 60 second countdown before automatically closing | |
Show-InstallationWelcome | |
## Show Progress Message (with the default message) | |
Show-InstallationProgress | |
## <Perform Pre-Uninstallation tasks here> | |
##*=============================================== | |
##* UNINSTALLATION | |
##*=============================================== | |
[string]$installPhase = 'Uninstallation' | |
## Handle Zero-Config MSI Uninstallations | |
If ($useDefaultMsi) { | |
[hashtable]$ExecuteDefaultMSISplat = @{ Action = 'Uninstall'; Path = $defaultMsiFile }; If ($defaultMstFile) { $ExecuteDefaultMSISplat.Add('Transform', $defaultMstFile) } | |
Execute-MSI @ExecuteDefaultMSISplat | |
} | |
# <Perform Uninstallation tasks here> | |
Execute-Process -Path "$envProgramFiles\XYZmaker\unins000.exe" -Parameters "/verysilent /norestart" | |
Execute-Process -Path "$envProgramFilesX86\XYZware\unins000.exe" -Parameters "/verysilent /norestart" | |
Execute-Process -Path "$envProgramFilesX86\SwAddinXYZprinting\unins000.exe" -Parameters "/verysilent /norestart" | |
##*=============================================== | |
##* POST-UNINSTALLATION | |
##*=============================================== | |
[string]$installPhase = 'Post-Uninstallation' | |
## <Perform Post-Uninstallation tasks here> | |
} | |
##*=============================================== | |
##* END SCRIPT BODY | |
##*=============================================== | |
## Call the Exit-Script function to perform final cleanup operations | |
Exit-Script -ExitCode $mainExitCode | |
} | |
Catch { | |
[int32]$mainExitCode = 60001 | |
[string]$mainErrorMessage = "$(Resolve-Error)" | |
Write-Log -Message $mainErrorMessage -Severity 3 -Source $deployAppScriptFriendlyName | |
Show-DialogBox -Text $mainErrorMessage -Icon 'Stop' | |
Exit-Script -ExitCode $mainExitCode | |
} |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment