terminal.log

gistfile1.txt

Send: M105
Changing monitoring state from 'Operational' to 'Printing'
Recv: ok T:171.2 /210.0 B:50.6 /55.0 T0:171.2 /210.0 T1:157.5 /210.0 @:127 B@:127 @0:127 @1:127
Send: N0 M110 N0*125
Recv: ok
Send: N1 M117 [          ]   0%*54
Recv: ok
See octoprint.log for details
Changing monitoring state from 'Printing' to 'Offline: See octoprint.log for details'
Changing monitoring state from 'Offline: See octoprint.log for details' to 'Operational'
Connection closed, closing down monitor
Changing monitoring state from 'Offline' to 'Detecting serial port'
Serial port list: ['/dev/ttyUSB0']
Connecting to: /dev/ttyUSB0
Connecting to: /dev/ttyUSB0
Changing monitoring state from 'Detecting serial port' to 'Opening serial port'
Connected to: Serial<id=0xb36d8130, open=True>(port='/dev/ttyUSB0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Changing monitoring state from 'Opening serial port' to 'Connecting'
Send: N0 M110 N0*125
Recv: start
Send: N0 M110 N0*125
Recv: echo:Marlin 1.1.0-RCBugFix
Recv: 
Recv: echo: Last Updated: 2016-12-06 12:00 | Author: (CH, 20170301)
Recv: Compiled: Mar 14 2017
Recv: echo: Free Memory: 2241  PlannerBufferBytes: 1232
Recv: echo:V31 stored settings retrieved (425 bytes)
Recv: echo:Steps per unit:
Recv: echo:  M92 X80.00 Y80.00 Z400.00 E94.50
Recv: echo:Maximum feedrates (mm/s):
Recv: echo:  M203 X500.00 Y500.00 Z5.00 E70.00
Recv: echo:Maximum Acceleration (mm/s2):
Recv: echo:  M201 X6000 Y6000 Z100 E10000
Recv: echo:Accelerations: P=printing, R=retract and T=travel
Recv: echo:  M204 P2000.00 R3000.00 T2000.00
Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
Recv: echo:  M205 S0.00 T0.00 B20000 X20.00 Y20.00 Z0.40 E5.00
Recv: echo:Home offset (mm)
Recv: echo:  M206 X0.00 Y0.00 Z0.00
Recv: echo:Hotend offsets (mm)
Recv: echo:  M218 T1 X28.50 Y-0.10 Z0.70
Recv: Auto Bed Leveling:
Recv: echo:  M420 S0
Recv: echo:Material heatup parameters:
Recv: echo:  M145 S0 H202 B55 F0
Recv:   M145 S1 H240 B110 F0
Recv: echo:PID settings:
Recv: echo:  M301 P14.49 I0.78 D66.96
Recv: echo:  M304 P150.34 I15.93 D354.72
Recv: echo:Filament settings: Disabled
Recv: echo:  M200 D3.00
Recv: echo:  M200 T1 D3.00
Recv: echo:  M200 D0
Recv: echo:Z-Probe Offset (mm):
Recv: echo:  M851 Z-0.75
Recv: echo:SD card ok
Recv: ok
Changing monitoring state from 'Connecting' to 'Operational'
Send: N1 M105*38
Recv: echo:SD card ok
Recv: ok T:205.9 /0.0 B:54.1 /0.0 T0:205.9 /0.0 T1:210.7 /0.0 @:0 B@:0 @0:0 @1:0
Send: N0 M110 N0*125
Recv: ok
Send: N1 M115*39
Recv: FIRMWARE_NAME:Marlin 1.1.0-RCBugFix (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:Carl EXTRUDER_COUNT:2 UUID:effea50a-d725-11e5-ab30-625662870761
Recv: Cap:EEPROM:1
Recv: Cap:AUTOREPORT_TEMP:0
Recv: Cap:PROGRESS:0
Recv: Cap:AUTOLEVEL:1
Recv: Cap:Z_PROBE:1
Recv: Cap:SOFTWARE_POWER:0
Recv: Cap:TOGGLE_LIGHTS:0
Recv: Cap:EMERGENCY_PARSER:0
Recv: ok
Send: M20
Recv: Begin file list
Recv: RADIO_~1.GCO
Recv: TARANI~1.GCO
Recv: MK5-18~1.GCO
Recv: SKID_R~1.GCO
Recv: SKID_F~1.GCO
Recv: MK5-18~2.GCO
Recv: End file list
Recv: ok
Send: M115
Recv: FIRMWARE_NAME:Marlin 1.1.0-RCBugFix (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:Carl EXTRUDER_COUNT:2 UUID:effea50a-d725-11e5-ab30-625662870761
Recv: Cap:EEPROM:1
Recv: Cap:AUTOREPORT_TEMP:0
Recv: Cap:PROGRESS:0
Recv: Cap:AUTOLEVEL:1
Recv: Cap:Z_PROBE:1
Recv: Cap:SOFTWARE_POWER:0
Recv: Cap:TOGGLE_LIGHTS:0
Recv: Cap:EMERGENCY_PARSER:0
Recv: ok
Send: M115
Recv: FIRMWARE_NAME:Marlin 1.1.0-RCBugFix (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:Carl EXTRUDER_COUNT:2 UUID:effea50a-d725-11e5-ab30-625662870761
Recv: Cap:EEPROM:1
Recv: Cap:AUTOREPORT_TEMP:0
Recv: Cap:PROGRESS:0
Recv: Cap:AUTOLEVEL:1
Recv: Cap:Z_PROBE:1
Recv: Cap:SOFTWARE_POWER:0
Recv: Cap:TOGGLE_LIGHTS:0
Recv: Cap:EMERGENCY_PARSER:0
Recv: ok
Send: M105
Recv: ok T:202.9 /0.0 B:53.7 /0.0 T0:202.9 /0.0 T1:207.1 /0.0 @:0 B@:0 @0:0 @1:0
Send: M104 T0 S210.000000
Recv: ok
Send: M104 T1 S210.000000
Recv: ok
Send: M140 S55.000000
Recv: ok
Send: M105
Recv: ok T:199.6 /210.0 B:53.4 /55.0 T0:199.6 /210.0 T1:203.5 /210.0 @:127 B@:76 @0:127 @1:76
Send: M105
Recv: ok T:199.0 /210.0 B:53.4 /55.0 T0:199.0 /210.0 T1:202.4 /210.0 @:127 B@:117 @0:127 @1:127
Send: M105
Recv: ok T:199.5 /210.0 B:53.7 /55.0 T0:199.5 /210.0 T1:201.2 /210.0 @:127 B@:122 @0:127 @1:127
Send: M105
Recv: ok T:201.2 /210.0 B:54.1 /55.0 T0:201.2 /210.0 T1:201.2 /210.0 @:46 B@:101 @0:46 @1:127
Send: M105
Recv: ok T:203.5 /210.0 B:54.8 /55.0 T0:203.5 /210.0 T1:202.4 /210.0 @:28 B@:57 @0:28 @1:127
Send: M105
Recv: ok T:204.7 /210.0 B:55.3 /55.0 T0:204.7 /210.0 T1:204.1 /210.0 @:28 B@:13 @0:28 @1:114
Send: M105
Changing monitoring state from 'Operational' to 'Printing'
Recv: ok T:205.9 /210.0 B:55.6 /55.0 T0:205.9 /210.0 T1:206.5 /210.0 @:27 B@:0 @0:27 @1:91
Send: N0 M110 N0*125
See octoprint.log for details
Changing monitoring state from 'Printing' to 'Offline: See octoprint.log for details'
Connection closed, closing down monitor