Last active
December 29, 2023 09:53
-
-
Save chuongmep/497dea0ead458b52d001f2c806f32f9d to your computer and use it in GitHub Desktop.
We can make this file beautiful and searchable if this error is corrected: No commas found in this CSV file in line 0.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
TypeId UnitLabel Version | |
autodesk.unit.unit:1ToRatio 1: 1.0.1 | |
autodesk.unit.unit:acres acres 1.0.1 | |
autodesk.unit.unit:amperes A 1.0.0 | |
autodesk.unit.unit:atmospheres atm 1.0.1 | |
autodesk.unit.unit:bars bar 1.0.1 | |
autodesk.unit.unit:britishThermalUnits Btu 1.0.1 | |
autodesk.unit.unit:britishThermalUnitsPerDegreeFahrenheit BTU/°F 1.0.1 | |
autodesk.unit.unit:britishThermalUnitsPerHour Btu/h 1.0.1 | |
autodesk.unit.unit:britishThermalUnitsPerHourCubicFoot Btu/(h·ft³) 1.0.1 | |
autodesk.unit.unit:britishThermalUnitsPerHourFootDegreeFahrenheit BTU/(h·ft·°F) 1.0.1 | |
autodesk.unit.unit:britishThermalUnitsPerHourSquareFoot Btu/(h·ft²) 1.0.1 | |
autodesk.unit.unit:britishThermalUnitsPerHourSquareFootDegreeFahrenheit BTU/(h·ft²·°F) 1.0.1 | |
autodesk.unit.unit:britishThermalUnitsPerPound BTU/lb 1.0.1 | |
autodesk.unit.unit:britishThermalUnitsPerPoundDegreeFahrenheit BTU/(lb·°F) 1.0.1 | |
autodesk.unit.unit:britishThermalUnitsPerSecond Btu/s 1.0.1 | |
autodesk.unit.unit:britishThermalUnitsPerSquareFootDegreeFahrenheit BTU/(ft²·°F) 1.0.0 | |
autodesk.unit.unit:calories cal 1.0.1 | |
autodesk.unit.unit:caloriesPerSecond cal/s 1.0.1 | |
autodesk.unit.unit:candelas cd 1.0.0 | |
autodesk.unit.unit:candelasPerSquareFoot cd/ft² 1.0.0 | |
autodesk.unit.unit:candelasPerSquareMeter cd/m² 1.0.1 | |
autodesk.unit.unit:celsius °C 1.0.1 | |
autodesk.unit.unit:celsiusInterval °C 1.0.1 | |
autodesk.unit.unit:centimeters cm 1.0.1 | |
autodesk.unit.unit:centimetersPerMinute cm/min 1.0.1 | |
autodesk.unit.unit:centimetersToTheFourthPower cm⁴ 1.0.1 | |
autodesk.unit.unit:centimetersToTheSixthPower cm⁶ 1.0.1 | |
autodesk.unit.unit:centipoises cP 1.0.1 | |
autodesk.unit.unit:cubicCentimeters cm³ 1.0.1 | |
autodesk.unit.unit:cubicFeet CF 1.0.1 | |
autodesk.unit.unit:cubicFeetPerHour CFH 1.0.0 | |
autodesk.unit.unit:cubicFeetPerKip ft³/kip 1.0.1 | |
autodesk.unit.unit:cubicFeetPerMinute CFM 1.0.1 | |
autodesk.unit.unit:cubicFeetPerMinuteCubicFoot CFM/CF 1.0.1 | |
autodesk.unit.unit:cubicFeetPerMinutePerBritishThermalUnitPerHour ft³·h/(min·Btu) 1.0.0 | |
autodesk.unit.unit:cubicFeetPerMinuteSquareFoot CFM/ft² 1.0.1 | |
autodesk.unit.unit:cubicFeetPerMinuteTonOfRefrigeration CFM/ton 1.0.1 | |
autodesk.unit.unit:cubicFeetPerPoundMass ft³/lb 1.0.0 | |
autodesk.unit.unit:cubicInches in³ 1.0.1 | |
autodesk.unit.unit:cubicMeters m³ 1.0.1 | |
autodesk.unit.unit:cubicMetersPerHour CMH 1.0.1 | |
autodesk.unit.unit:cubicMetersPerHourCubicMeter m³/(h·m³) 1.0.0 | |
autodesk.unit.unit:cubicMetersPerHourSquareMeter m³/(h·m²) 1.0.0 | |
autodesk.unit.unit:cubicMetersPerKilogram m³/kg 1.0.0 | |
autodesk.unit.unit:cubicMetersPerKilonewton m³/kN 1.0.1 | |
autodesk.unit.unit:cubicMetersPerSecond CMS 1.0.1 | |
autodesk.unit.unit:cubicMetersPerWattSecond m³/(W·s) 1.0.0 | |
autodesk.unit.unit:cubicMillimeters mm³ 1.0.1 | |
autodesk.unit.unit:cubicYards CY 1.0.1 | |
autodesk.unit.unit:currency ฿ 1.0.0 | |
autodesk.unit.unit:currencyPerBritishThermalUnit $/Btu 1.0.1 | |
autodesk.unit.unit:currencyPerBritishThermalUnitPerHour $·h/Btu 1.0.1 | |
autodesk.unit.unit:currencyPerSquareFoot $/ft² 1.0.1 | |
autodesk.unit.unit:currencyPerSquareMeter $/m² 1.0.1 | |
autodesk.unit.unit:currencyPerWatt $/W 1.0.1 | |
autodesk.unit.unit:currencyPerWattHour $/(W·h) 1.0.1 | |
autodesk.unit.unit:cyclesPerSecond cps 1.0.1 | |
autodesk.unit.unit:decimeters dm 1.0.1 | |
autodesk.unit.unit:degrees ° 1.0.1 | |
autodesk.unit.unit:dekanewtonMeters daN-m 1.0.1 | |
autodesk.unit.unit:dekanewtonMetersPerMeter daN-m/m 1.0.1 | |
autodesk.unit.unit:dekanewtons daN 1.0.1 | |
autodesk.unit.unit:dekanewtonsPerMeter daN/m 1.0.1 | |
autodesk.unit.unit:dekanewtonsPerSquareMeter daN/m² 1.0.1 | |
autodesk.unit.unit:fahrenheit °F 1.0.1 | |
autodesk.unit.unit:fahrenheitInterval °F 1.0.1 | |
autodesk.unit.unit:feet ' 1.0.1 | |
autodesk.unit.unit:feetOfWater39.2DegreesFahrenheit Feet 1.0.1 | |
autodesk.unit.unit:feetOfWater39.2DegreesFahrenheitPer100Feet Feet/100ft 1.0.1 | |
autodesk.unit.unit:feetPerKip ft/kip 1.0.0 | |
autodesk.unit.unit:feetPerMinute FPM 1.0.1 | |
autodesk.unit.unit:feetPerSecond FPS 1.0.1 | |
autodesk.unit.unit:feetPerSecondSquared ft/s² 1.0.1 | |
autodesk.unit.unit:feetToTheFourthPower ft⁴ 1.0.1 | |
autodesk.unit.unit:feetToTheSixthPower ft⁶ 1.0.1 | |
autodesk.unit.unit:footcandles fc 1.0.1 | |
autodesk.unit.unit:footlamberts fL 1.0.1 | |
autodesk.unit.unit:gradians grad 1.0.1 | |
autodesk.unit.unit:grains gr 1.0.1 | |
autodesk.unit.unit:grainsPerHourSquareFootInchMercury gr/(h·ft²·inHg) 1.0.1 | |
autodesk.unit.unit:grams g 1.0.1 | |
autodesk.unit.unit:hectares hectare 1.0.1 | |
autodesk.unit.unit:hectometers hm 1.0.1 | |
autodesk.unit.unit:hertz Hz 1.0.1 | |
autodesk.unit.unit:horsepower hp 1.0.1 | |
autodesk.unit.unit:hourSquareFootDegreesFahrenheitPerBritishThermalUnit (h·ft²·°F)/BTU 1.0.1 | |
autodesk.unit.unit:hours h 1.0.1 | |
autodesk.unit.unit:inches in 1.0.1 | |
autodesk.unit.unit:inchesOfMercury32DegreesFahrenheit inHg 1.0.1 | |
autodesk.unit.unit:inchesOfWater60DegreesFahrenheit in-wg 1.0.1 | |
autodesk.unit.unit:inchesOfWater60DegreesFahrenheitPer100Feet in-wg/100ft 1.0.1 | |
autodesk.unit.unit:inchesPerSecond in/s 1.0.1 | |
autodesk.unit.unit:inchesPerSecondSquared in/s² 1.0.1 | |
autodesk.unit.unit:inchesToTheFourthPower in⁴ 1.0.1 | |
autodesk.unit.unit:inchesToTheSixthPower in⁶ 1.0.1 | |
autodesk.unit.unit:inverseDegreesCelsius 1/°C 1.0.1 | |
autodesk.unit.unit:inverseDegreesFahrenheit 1/°F 1.0.1 | |
autodesk.unit.unit:inverseKilonewtons 1/kN 1.0.0 | |
autodesk.unit.unit:inverseKips 1/kip 1.0.0 | |
autodesk.unit.unit:joules J 1.0.1 | |
autodesk.unit.unit:joulesPerGram J/g 1.0.1 | |
autodesk.unit.unit:joulesPerGramDegreeCelsius J/(g·°C) 1.0.1 | |
autodesk.unit.unit:joulesPerKelvin J/K 1.0.1 | |
autodesk.unit.unit:joulesPerKilogram J/kg 1.0.1 | |
autodesk.unit.unit:joulesPerKilogramDegreeCelsius J/(kg·°C) 1.0.1 | |
autodesk.unit.unit:joulesPerSquareMeterKelvin J/(m²·K) 1.0.0 | |
autodesk.unit.unit:kelvin K 1.0.0 | |
autodesk.unit.unit:kelvinInterval deltaK 1.0.0 | |
autodesk.unit.unit:kiloamperes kA 1.0.1 | |
autodesk.unit.unit:kilocalories kcal 1.0.1 | |
autodesk.unit.unit:kilocaloriesPerSecond kcal/s 1.0.1 | |
autodesk.unit.unit:kilogramForceMeters kgf-m 1.0.1 | |
autodesk.unit.unit:kilogramForceMetersPerMeter kgf-m/m 1.0.1 | |
autodesk.unit.unit:kilogramKelvins kg·K 1.0.0 | |
autodesk.unit.unit:kilograms kg 1.0.0 | |
autodesk.unit.unit:kilogramsForce kgf 1.0.1 | |
autodesk.unit.unit:kilogramsForcePerMeter kgf/m 1.0.1 | |
autodesk.unit.unit:kilogramsForcePerSquareMeter kgf/m² 1.0.1 | |
autodesk.unit.unit:kilogramsPerCubicMeter kg/m³ 1.0.1 | |
autodesk.unit.unit:kilogramsPerHour kg/h 1.0.0 | |
autodesk.unit.unit:kilogramsPerKilogramKelvin kg/(kg·K) 1.0.0 | |
autodesk.unit.unit:kilogramsPerMeter kg/m 1.0.1 | |
autodesk.unit.unit:kilogramsPerMeterHour kg/(m·h) 1.0.0 | |
autodesk.unit.unit:kilogramsPerMeterSecond kg/(m·s) 1.0.0 | |
autodesk.unit.unit:kilogramsPerMinute kg/min 1.0.0 | |
autodesk.unit.unit:kilogramsPerSecond kg/s 1.0.0 | |
autodesk.unit.unit:kilogramsPerSquareMeter kg/m² 1.0.1 | |
autodesk.unit.unit:kilojoules kJ 1.0.1 | |
autodesk.unit.unit:kilojoulesPerKelvin kJ/K 1.0.1 | |
autodesk.unit.unit:kilojoulesPerSquareMeterKelvin kJ/(m²·K) 1.0.0 | |
autodesk.unit.unit:kilometers km 1.0.1 | |
autodesk.unit.unit:kilometersPerHour km/h 1.0.1 | |
autodesk.unit.unit:kilometersPerSecond km/s 1.0.1 | |
autodesk.unit.unit:kilometersPerSecondSquared km/s² 1.0.1 | |
autodesk.unit.unit:kilonewtonMeters kN-m 1.0.1 | |
autodesk.unit.unit:kilonewtonMetersPerDegree kN-m/° 1.0.1 | |
autodesk.unit.unit:kilonewtonMetersPerDegreePerMeter kN-m/°/m 1.0.1 | |
autodesk.unit.unit:kilonewtonMetersPerMeter kN-m/m 1.0.1 | |
autodesk.unit.unit:kilonewtons kN 1.0.1 | |
autodesk.unit.unit:kilonewtonsPerCubicMeter kN/m³ 1.0.1 | |
autodesk.unit.unit:kilonewtonsPerMeter kN/m 1.0.1 | |
autodesk.unit.unit:kilonewtonsPerSquareCentimeter kN/cm² 1.0.1 | |
autodesk.unit.unit:kilonewtonsPerSquareMeter kN/m² 1.0.1 | |
autodesk.unit.unit:kilonewtonsPerSquareMillimeter kN/mm² 1.0.1 | |
autodesk.unit.unit:kilopascals kPa 1.0.1 | |
autodesk.unit.unit:kilovoltAmperes kVA 1.0.1 | |
autodesk.unit.unit:kilovolts kV 1.0.1 | |
autodesk.unit.unit:kilowattHours kWh 1.0.1 | |
autodesk.unit.unit:kilowatts kW 1.0.1 | |
autodesk.unit.unit:kipFeet kip-ft 1.0.1 | |
autodesk.unit.unit:kipFeetPerDegree kip-ft/° 1.0.1 | |
autodesk.unit.unit:kipFeetPerDegreePerFoot kip-ft/°/ft 1.0.1 | |
autodesk.unit.unit:kipFeetPerFoot kip-ft/ft 1.0.1 | |
autodesk.unit.unit:kips kip 1.0.1 | |
autodesk.unit.unit:kipsPerCubicFoot kip/ft³ 1.0.1 | |
autodesk.unit.unit:kipsPerCubicInch kip/in³ 1.0.1 | |
autodesk.unit.unit:kipsPerFoot kip/ft 1.0.1 | |
autodesk.unit.unit:kipsPerInch kip/in 1.0.1 | |
autodesk.unit.unit:kipsPerSquareFoot kip/ft² 1.0.1 | |
autodesk.unit.unit:kipsPerSquareInch kip/in² 1.0.1 | |
autodesk.unit.unit:liters L 1.0.1 | |
autodesk.unit.unit:litersPerHour L/h 1.0.1 | |
autodesk.unit.unit:litersPerMinute L/min 1.0.1 | |
autodesk.unit.unit:litersPerSecond L/s 1.0.1 | |
autodesk.unit.unit:litersPerSecondCubicMeter L/(s·m³) 1.0.1 | |
autodesk.unit.unit:litersPerSecondKilowatt L/(s·kW) 1.0.1 | |
autodesk.unit.unit:litersPerSecondSquareMeter L/(s·m²) 1.0.1 | |
autodesk.unit.unit:lumens lm 1.0.1 | |
autodesk.unit.unit:lumensPerWatt lm/W 1.0.1 | |
autodesk.unit.unit:lux lx 1.0.1 | |
autodesk.unit.unit:meganewtonMeters MN-m 1.0.1 | |
autodesk.unit.unit:meganewtonMetersPerMeter MN-m/m 1.0.1 | |
autodesk.unit.unit:meganewtons MN 1.0.1 | |
autodesk.unit.unit:meganewtonsPerMeter MN/m 1.0.1 | |
autodesk.unit.unit:meganewtonsPerSquareMeter MN/m² 1.0.1 | |
autodesk.unit.unit:megapascals MPa 1.0.1 | |
autodesk.unit.unit:meters m 1.0.0 | |
autodesk.unit.unit:metersOfWaterColumn mH2O 1.0.0 | |
autodesk.unit.unit:metersOfWaterColumnPerMeter mH2O/m 1.0.0 | |
autodesk.unit.unit:metersPerKilonewton m/kN 1.0.0 | |
autodesk.unit.unit:metersPerSecond m/s 1.0.1 | |
autodesk.unit.unit:metersPerSecondSquared m/s² 1.0.1 | |
autodesk.unit.unit:metersToTheFourthPower m⁴ 1.0.1 | |
autodesk.unit.unit:metersToTheSixthPower m⁶ 1.0.1 | |
autodesk.unit.unit:microinchesPerInchDegreeFahrenheit µin/(in·°F) 1.0.1 | |
autodesk.unit.unit:micrometersPerMeterDegreeCelsius µm/(m·°C) 1.0.1 | |
autodesk.unit.unit:miles mi 1.0.1 | |
autodesk.unit.unit:milesPerHour mph 1.0.1 | |
autodesk.unit.unit:milesPerSecond mi/s 1.0.1 | |
autodesk.unit.unit:milesPerSecondSquared mi/s² 1.0.1 | |
autodesk.unit.unit:milliamperes mA 1.0.1 | |
autodesk.unit.unit:milligrams mg 1.0.1 | |
autodesk.unit.unit:millimeters mm 1.0.1 | |
autodesk.unit.unit:millimetersOfMercury mmHg 1.0.1 | |
autodesk.unit.unit:millimetersOfWaterColumn mmH2O 1.0.0 | |
autodesk.unit.unit:millimetersOfWaterColumnPerMeter mmH2O/m 1.0.0 | |
autodesk.unit.unit:millimetersToTheFourthPower mm⁴ 1.0.1 | |
autodesk.unit.unit:millimetersToTheSixthPower mm⁶ 1.0.1 | |
autodesk.unit.unit:milliseconds ms 1.0.1 | |
autodesk.unit.unit:millivolts mV 1.0.1 | |
autodesk.unit.unit:minutes min 1.0.1 | |
autodesk.unit.unit:nanograms ng 1.0.1 | |
autodesk.unit.unit:nanogramsPerPascalSecondSquareMeter ng/(Pa·s·m²) 1.0.1 | |
autodesk.unit.unit:newtonMeters N-m 1.0.1 | |
autodesk.unit.unit:newtonMetersPerMeter N-m/m 1.0.1 | |
autodesk.unit.unit:newtonSecondsPerSquareMeter N·s/m² 1.0.0 | |
autodesk.unit.unit:newtons N 1.0.1 | |
autodesk.unit.unit:newtonsPerMeter N/m 1.0.1 | |
autodesk.unit.unit:newtonsPerSquareMeter N/m² 1.0.1 | |
autodesk.unit.unit:newtonsPerSquareMillimeter N/mm² 1.0.1 | |
autodesk.unit.unit:ohmMeters ohm·m 1.0.1 | |
autodesk.unit.unit:ohms ohm 1.0.1 | |
autodesk.unit.unit:pascalSeconds Pa-s 1.0.1 | |
autodesk.unit.unit:pascals Pa 1.0.1 | |
autodesk.unit.unit:pascalsPerMeter Pa/m 1.0.1 | |
autodesk.unit.unit:perMille ‰ 1.0.1 | |
autodesk.unit.unit:percentage % 1.0.1 | |
autodesk.unit.unit:pi π 1.0.0 | |
autodesk.unit.unit:poises P 1.0.1 | |
autodesk.unit.unit:poundForceFeet lb-ft 1.0.1 | |
autodesk.unit.unit:poundForceFeetPerFoot lb-ft/ft 1.0.1 | |
autodesk.unit.unit:poundForceSecondsPerSquareFoot lb·s/ft² 1.0.0 | |
autodesk.unit.unit:poundMassDegreesFahrenheit lb·°F 1.0.0 | |
autodesk.unit.unit:poundsForce lb 1.0.1 | |
autodesk.unit.unit:poundsForcePerCubicFoot lb/ft³ 1.0.1 | |
autodesk.unit.unit:poundsForcePerFoot lb/ft 1.0.1 | |
autodesk.unit.unit:poundsForcePerSquareFoot lb/ft² 1.0.1 | |
autodesk.unit.unit:poundsForcePerSquareInch lb/in² 1.0.1 | |
autodesk.unit.unit:poundsMass lb 1.0.1 | |
autodesk.unit.unit:poundsMassPerCubicFoot lb/ft³ 1.0.1 | |
autodesk.unit.unit:poundsMassPerCubicInch lb/in³ 1.0.1 | |
autodesk.unit.unit:poundsMassPerFoot lb/ft 1.0.1 | |
autodesk.unit.unit:poundsMassPerFootHour lb/ft-h 1.0.1 | |
autodesk.unit.unit:poundsMassPerFootSecond lb/ft-s 1.0.1 | |
autodesk.unit.unit:poundsMassPerHour lb/h 1.0.0 | |
autodesk.unit.unit:poundsMassPerMinute lb/min 1.0.0 | |
autodesk.unit.unit:poundsMassPerPoundDegreeFahrenheit lb/(lb·°F) 1.0.0 | |
autodesk.unit.unit:poundsMassPerSecond lb/s 1.0.0 | |
autodesk.unit.unit:poundsMassPerSquareFoot lb/ft² 1.0.1 | |
autodesk.unit.unit:radians rad 1.0.0 | |
autodesk.unit.unit:radiansPerSecond rad/s 1.0.1 | |
autodesk.unit.unit:rankine °R 1.0.1 | |
autodesk.unit.unit:rankineInterval °R 1.0.1 | |
autodesk.unit.unit:ratioTo1 :1 1.0.0 | |
autodesk.unit.unit:ratioTo10 :10 1.0.1 | |
autodesk.unit.unit:ratioTo12 :12 1.0.1 | |
autodesk.unit.unit:revolutionsPerMinute RPM 1.0.0 | |
autodesk.unit.unit:revolutionsPerSecond RPS 1.0.0 | |
autodesk.unit.unit:seconds s 1.0.0 | |
autodesk.unit.unit:squareCentimeters cm² 1.0.1 | |
autodesk.unit.unit:squareCentimetersPerMeter cm²/m 1.0.1 | |
autodesk.unit.unit:squareFeet ft² 1.0.1 | |
autodesk.unit.unit:squareFeetPer1000BritishThermalUnitsPerHour ft²·h/kBtu 1.0.1 | |
autodesk.unit.unit:squareFeetPerFoot ft²/ft 1.0.1 | |
autodesk.unit.unit:squareFeetPerKip ft²/kip 1.0.1 | |
autodesk.unit.unit:squareFeetPerSecond ft²/s 1.0.0 | |
autodesk.unit.unit:squareFeetPerTonOfRefrigeration ft²/ton 1.0.1 | |
autodesk.unit.unit:squareHectometers hm² 1.0.1 | |
autodesk.unit.unit:squareInches in² 1.0.1 | |
autodesk.unit.unit:squareInchesPerFoot in²/ft 1.0.1 | |
autodesk.unit.unit:squareMeterKelvinsPerWatt (m²·K)/W 1.0.1 | |
autodesk.unit.unit:squareMeters m² 1.0.1 | |
autodesk.unit.unit:squareMetersPerKilonewton m²/kN 1.0.1 | |
autodesk.unit.unit:squareMetersPerKilowatt m²/kW 1.0.1 | |
autodesk.unit.unit:squareMetersPerMeter m²/m 1.0.1 | |
autodesk.unit.unit:squareMetersPerSecond m²/s 1.0.0 | |
autodesk.unit.unit:squareMillimeters mm² 1.0.1 | |
autodesk.unit.unit:squareMillimetersPerMeter mm²/m 1.0.1 | |
autodesk.unit.unit:squareYards yd² 1.0.1 | |
autodesk.unit.unit:standardGravity 𝘨 1.0.1 | |
autodesk.unit.unit:steradians sr 1.0.0 | |
autodesk.unit.unit:therms therm 1.0.1 | |
autodesk.unit.unit:thousandBritishThermalUnitsPerHour MBH 1.0.0 | |
autodesk.unit.unit:tonneForceMeters Tf-m 1.0.1 | |
autodesk.unit.unit:tonneForceMetersPerMeter Tf-m/m 1.0.1 | |
autodesk.unit.unit:tonnes t 1.0.1 | |
autodesk.unit.unit:tonnesForce Tf 1.0.1 | |
autodesk.unit.unit:tonnesForcePerMeter Tf/m 1.0.1 | |
autodesk.unit.unit:tonnesForcePerSquareMeter Tf/m² 1.0.1 | |
autodesk.unit.unit:tonsOfRefrigeration ton 1.0.1 | |
autodesk.unit.unit:turns tr 1.0.1 | |
autodesk.unit.unit:usGallons gal 1.0.1 | |
autodesk.unit.unit:usGallonsPerHour gal/h 1.0.1 | |
autodesk.unit.unit:usGallonsPerMinute gal/min 1.0.1 | |
autodesk.unit.unit:usSurveyFeet USft 1.0.0 | |
autodesk.unit.unit:usTonnesForce STf 1.0.1 | |
autodesk.unit.unit:usTonnesMass ST 1.0.1 | |
autodesk.unit.unit:voltAmperes VA 1.0.1 | |
autodesk.unit.unit:volts V 1.0.1 | |
autodesk.unit.unit:watts W 1.0.1 | |
autodesk.unit.unit:wattsPerCubicFoot W/ft³ 1.0.1 | |
autodesk.unit.unit:wattsPerCubicFootPerMinute W·min/ft³ 1.0.0 | |
autodesk.unit.unit:wattsPerCubicMeter W/m³ 1.0.1 | |
autodesk.unit.unit:wattsPerCubicMeterPerSecond W·s/m³ 1.0.0 | |
autodesk.unit.unit:wattsPerFoot W/ft 1.0.0 | |
autodesk.unit.unit:wattsPerMeter W/m 1.0.0 | |
autodesk.unit.unit:wattsPerMeterKelvin W/(m·K) 1.0.1 | |
autodesk.unit.unit:wattsPerSquareFoot W/ft² 1.0.1 | |
autodesk.unit.unit:wattsPerSquareMeter W/m² 1.0.1 | |
autodesk.unit.unit:wattsPerSquareMeterKelvin W/(m²·K) 1.0.1 | |
autodesk.unit.unit:yards yd 1.0.1 | |
autodesk.unit.unit:slopeDegrees ° 1.0.0 | |
autodesk.unit.unit:ampereHours A-h 1.0.0 | |
autodesk.unit.unit:ampereSeconds A-s 1.0.0 | |
autodesk.unit.unit:circularMils cmil 1.0.0 | |
autodesk.unit.unit:coulombs C 1.0.0 | |
autodesk.unit.unit:dynes dyn 1.0.0 | |
autodesk.unit.unit:ergs erg 1.0.0 | |
autodesk.unit.unit:farads F 1.0.0 | |
autodesk.unit.unit:feetPerKipFoot ft/kip-ft 1.0.1 | |
autodesk.unit.unit:gammas gamma 1.0.0 | |
autodesk.unit.unit:gauss Gs 1.0.0 | |
autodesk.unit.unit:henries H 1.0.0 | |
autodesk.unit.unit:maxwells Mx 1.0.0 | |
autodesk.unit.unit:metersPerKilonewtonMeter m/kN-m 1.0.1 | |
autodesk.unit.unit:mhos mho 1.0.0 | |
autodesk.unit.unit:microns micron 1.0.0 | |
autodesk.unit.unit:mils mil 1.0.0 | |
autodesk.unit.unit:nauticalMiles M 1.0.0 | |
autodesk.unit.unit:oersteds Oe 1.0.0 | |
autodesk.unit.unit:ouncesForce ozf 1.0.0 | |
autodesk.unit.unit:ouncesMass oz 1.0.0 | |
autodesk.unit.unit:siemens S 1.0.0 | |
autodesk.unit.unit:slugs slug 1.0.0 | |
autodesk.unit.unit:squareFeetPerKipFoot ft²/kip-ft 1.0.1 | |
autodesk.unit.unit:squareMetersPerKilonewtonMeter m²/kN-m 1.0.1 | |
autodesk.unit.unit:squareMils mil^2 1.0.0 | |
autodesk.unit.unit:webers Wb 1.0.0 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ | |
{ | |
"TypeId": "autodesk.unit.unit:1ToRatio", | |
"UnitLabel": "1:", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:acres", | |
"UnitLabel": "acres", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:amperes", | |
"UnitLabel": "A", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:atmospheres", | |
"UnitLabel": "atm", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:bars", | |
"UnitLabel": "bar", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:britishThermalUnits", | |
"UnitLabel": "Btu", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:britishThermalUnitsPerDegreeFahrenheit", | |
"UnitLabel": "BTU/°F", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:britishThermalUnitsPerHour", | |
"UnitLabel": "Btu/h", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:britishThermalUnitsPerHourCubicFoot", | |
"UnitLabel": "Btu/(h·ft³)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:britishThermalUnitsPerHourFootDegreeFahrenheit", | |
"UnitLabel": "BTU/(h·ft·°F)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:britishThermalUnitsPerHourSquareFoot", | |
"UnitLabel": "Btu/(h·ft²)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:britishThermalUnitsPerHourSquareFootDegreeFahrenheit", | |
"UnitLabel": "BTU/(h·ft²·°F)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:britishThermalUnitsPerPound", | |
"UnitLabel": "BTU/lb", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:britishThermalUnitsPerPoundDegreeFahrenheit", | |
"UnitLabel": "BTU/(lb·°F)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:britishThermalUnitsPerSecond", | |
"UnitLabel": "Btu/s", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:britishThermalUnitsPerSquareFootDegreeFahrenheit", | |
"UnitLabel": "BTU/(ft²·°F)", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:calories", | |
"UnitLabel": "cal", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:caloriesPerSecond", | |
"UnitLabel": "cal/s", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:candelas", | |
"UnitLabel": "cd", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:candelasPerSquareFoot", | |
"UnitLabel": "cd/ft²", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:candelasPerSquareMeter", | |
"UnitLabel": "cd/m²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:celsius", | |
"UnitLabel": "°C", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:celsiusInterval", | |
"UnitLabel": "°C", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:centimeters", | |
"UnitLabel": "cm", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:centimetersPerMinute", | |
"UnitLabel": "cm/min", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:centimetersToTheFourthPower", | |
"UnitLabel": "cm⁴", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:centimetersToTheSixthPower", | |
"UnitLabel": "cm⁶", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:centipoises", | |
"UnitLabel": "cP", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicCentimeters", | |
"UnitLabel": "cm³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicFeet", | |
"UnitLabel": "CF", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicFeetPerHour", | |
"UnitLabel": "CFH", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicFeetPerKip", | |
"UnitLabel": "ft³/kip", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicFeetPerMinute", | |
"UnitLabel": "CFM", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicFeetPerMinuteCubicFoot", | |
"UnitLabel": "CFM/CF", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicFeetPerMinutePerBritishThermalUnitPerHour", | |
"UnitLabel": "ft³·h/(min·Btu)", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicFeetPerMinuteSquareFoot", | |
"UnitLabel": "CFM/ft²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicFeetPerMinuteTonOfRefrigeration", | |
"UnitLabel": "CFM/ton", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicFeetPerPoundMass", | |
"UnitLabel": "ft³/lb", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicInches", | |
"UnitLabel": "in³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicMeters", | |
"UnitLabel": "m³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicMetersPerHour", | |
"UnitLabel": "CMH", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicMetersPerHourCubicMeter", | |
"UnitLabel": "m³/(h·m³)", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicMetersPerHourSquareMeter", | |
"UnitLabel": "m³/(h·m²)", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicMetersPerKilogram", | |
"UnitLabel": "m³/kg", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicMetersPerKilonewton", | |
"UnitLabel": "m³/kN", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicMetersPerSecond", | |
"UnitLabel": "CMS", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicMetersPerWattSecond", | |
"UnitLabel": "m³/(W·s)", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicMillimeters", | |
"UnitLabel": "mm³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cubicYards", | |
"UnitLabel": "CY", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:currency", | |
"UnitLabel": "฿", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:currencyPerBritishThermalUnit", | |
"UnitLabel": "$/Btu", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:currencyPerBritishThermalUnitPerHour", | |
"UnitLabel": "$·h/Btu", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:currencyPerSquareFoot", | |
"UnitLabel": "$/ft²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:currencyPerSquareMeter", | |
"UnitLabel": "$/m²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:currencyPerWatt", | |
"UnitLabel": "$/W", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:currencyPerWattHour", | |
"UnitLabel": "$/(W·h)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:cyclesPerSecond", | |
"UnitLabel": "cps", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:decimeters", | |
"UnitLabel": "dm", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:degrees", | |
"UnitLabel": "°", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:dekanewtonMeters", | |
"UnitLabel": "daN-m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:dekanewtonMetersPerMeter", | |
"UnitLabel": "daN-m/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:dekanewtons", | |
"UnitLabel": "daN", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:dekanewtonsPerMeter", | |
"UnitLabel": "daN/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:dekanewtonsPerSquareMeter", | |
"UnitLabel": "daN/m²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:fahrenheit", | |
"UnitLabel": "°F", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:fahrenheitInterval", | |
"UnitLabel": "°F", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:feet", | |
"UnitLabel": "'", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:feetOfWater39.2DegreesFahrenheit", | |
"UnitLabel": "Feet", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:feetOfWater39.2DegreesFahrenheitPer100Feet", | |
"UnitLabel": "Feet/100ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:feetPerKip", | |
"UnitLabel": "ft/kip", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:feetPerMinute", | |
"UnitLabel": "FPM", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:feetPerSecond", | |
"UnitLabel": "FPS", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:feetPerSecondSquared", | |
"UnitLabel": "ft/s²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:feetToTheFourthPower", | |
"UnitLabel": "ft⁴", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:feetToTheSixthPower", | |
"UnitLabel": "ft⁶", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:footcandles", | |
"UnitLabel": "fc", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:footlamberts", | |
"UnitLabel": "fL", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:gradians", | |
"UnitLabel": "grad", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:grains", | |
"UnitLabel": "gr", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:grainsPerHourSquareFootInchMercury", | |
"UnitLabel": "gr/(h·ft²·inHg)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:grams", | |
"UnitLabel": "g", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:hectares", | |
"UnitLabel": "hectare", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:hectometers", | |
"UnitLabel": "hm", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:hertz", | |
"UnitLabel": "Hz", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:horsepower", | |
"UnitLabel": "hp", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:hourSquareFootDegreesFahrenheitPerBritishThermalUnit", | |
"UnitLabel": "(h·ft²·°F)/BTU", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:hours", | |
"UnitLabel": "h", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:inches", | |
"UnitLabel": "in", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:inchesOfMercury32DegreesFahrenheit", | |
"UnitLabel": "inHg", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:inchesOfWater60DegreesFahrenheit", | |
"UnitLabel": "in-wg", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:inchesOfWater60DegreesFahrenheitPer100Feet", | |
"UnitLabel": "in-wg/100ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:inchesPerSecond", | |
"UnitLabel": "in/s", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:inchesPerSecondSquared", | |
"UnitLabel": "in/s²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:inchesToTheFourthPower", | |
"UnitLabel": "in⁴", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:inchesToTheSixthPower", | |
"UnitLabel": "in⁶", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:inverseDegreesCelsius", | |
"UnitLabel": "1/°C", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:inverseDegreesFahrenheit", | |
"UnitLabel": "1/°F", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:inverseKilonewtons", | |
"UnitLabel": "1/kN", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:inverseKips", | |
"UnitLabel": "1/kip", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:joules", | |
"UnitLabel": "J", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:joulesPerGram", | |
"UnitLabel": "J/g", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:joulesPerGramDegreeCelsius", | |
"UnitLabel": "J/(g·°C)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:joulesPerKelvin", | |
"UnitLabel": "J/K", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:joulesPerKilogram", | |
"UnitLabel": "J/kg", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:joulesPerKilogramDegreeCelsius", | |
"UnitLabel": "J/(kg·°C)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:joulesPerSquareMeterKelvin", | |
"UnitLabel": "J/(m²·K)", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kelvin", | |
"UnitLabel": "K", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kelvinInterval", | |
"UnitLabel": "deltaK", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kiloamperes", | |
"UnitLabel": "kA", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilocalories", | |
"UnitLabel": "kcal", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilocaloriesPerSecond", | |
"UnitLabel": "kcal/s", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramForceMeters", | |
"UnitLabel": "kgf-m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramForceMetersPerMeter", | |
"UnitLabel": "kgf-m/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramKelvins", | |
"UnitLabel": "kg·K", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilograms", | |
"UnitLabel": "kg", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramsForce", | |
"UnitLabel": "kgf", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramsForcePerMeter", | |
"UnitLabel": "kgf/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramsForcePerSquareMeter", | |
"UnitLabel": "kgf/m²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramsPerCubicMeter", | |
"UnitLabel": "kg/m³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramsPerHour", | |
"UnitLabel": "kg/h", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramsPerKilogramKelvin", | |
"UnitLabel": "kg/(kg·K)", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramsPerMeter", | |
"UnitLabel": "kg/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramsPerMeterHour", | |
"UnitLabel": "kg/(m·h)", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramsPerMeterSecond", | |
"UnitLabel": "kg/(m·s)", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramsPerMinute", | |
"UnitLabel": "kg/min", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramsPerSecond", | |
"UnitLabel": "kg/s", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilogramsPerSquareMeter", | |
"UnitLabel": "kg/m²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilojoules", | |
"UnitLabel": "kJ", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilojoulesPerKelvin", | |
"UnitLabel": "kJ/K", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilojoulesPerSquareMeterKelvin", | |
"UnitLabel": "kJ/(m²·K)", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilometers", | |
"UnitLabel": "km", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilometersPerHour", | |
"UnitLabel": "km/h", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilometersPerSecond", | |
"UnitLabel": "km/s", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilometersPerSecondSquared", | |
"UnitLabel": "km/s²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilonewtonMeters", | |
"UnitLabel": "kN-m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilonewtonMetersPerDegree", | |
"UnitLabel": "kN-m/°", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilonewtonMetersPerDegreePerMeter", | |
"UnitLabel": "kN-m/°/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilonewtonMetersPerMeter", | |
"UnitLabel": "kN-m/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilonewtons", | |
"UnitLabel": "kN", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilonewtonsPerCubicMeter", | |
"UnitLabel": "kN/m³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilonewtonsPerMeter", | |
"UnitLabel": "kN/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilonewtonsPerSquareCentimeter", | |
"UnitLabel": "kN/cm²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilonewtonsPerSquareMeter", | |
"UnitLabel": "kN/m²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilonewtonsPerSquareMillimeter", | |
"UnitLabel": "kN/mm²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilopascals", | |
"UnitLabel": "kPa", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilovoltAmperes", | |
"UnitLabel": "kVA", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilovolts", | |
"UnitLabel": "kV", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilowattHours", | |
"UnitLabel": "kWh", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kilowatts", | |
"UnitLabel": "kW", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kipFeet", | |
"UnitLabel": "kip-ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kipFeetPerDegree", | |
"UnitLabel": "kip-ft/°", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kipFeetPerDegreePerFoot", | |
"UnitLabel": "kip-ft/°/ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kipFeetPerFoot", | |
"UnitLabel": "kip-ft/ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kips", | |
"UnitLabel": "kip", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kipsPerCubicFoot", | |
"UnitLabel": "kip/ft³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kipsPerCubicInch", | |
"UnitLabel": "kip/in³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kipsPerFoot", | |
"UnitLabel": "kip/ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kipsPerInch", | |
"UnitLabel": "kip/in", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kipsPerSquareFoot", | |
"UnitLabel": "kip/ft²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:kipsPerSquareInch", | |
"UnitLabel": "kip/in²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:liters", | |
"UnitLabel": "L", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:litersPerHour", | |
"UnitLabel": "L/h", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:litersPerMinute", | |
"UnitLabel": "L/min", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:litersPerSecond", | |
"UnitLabel": "L/s", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:litersPerSecondCubicMeter", | |
"UnitLabel": "L/(s·m³)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:litersPerSecondKilowatt", | |
"UnitLabel": "L/(s·kW)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:litersPerSecondSquareMeter", | |
"UnitLabel": "L/(s·m²)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:lumens", | |
"UnitLabel": "lm", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:lumensPerWatt", | |
"UnitLabel": "lm/W", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:lux", | |
"UnitLabel": "lx", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:meganewtonMeters", | |
"UnitLabel": "MN-m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:meganewtonMetersPerMeter", | |
"UnitLabel": "MN-m/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:meganewtons", | |
"UnitLabel": "MN", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:meganewtonsPerMeter", | |
"UnitLabel": "MN/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:meganewtonsPerSquareMeter", | |
"UnitLabel": "MN/m²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:megapascals", | |
"UnitLabel": "MPa", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:meters", | |
"UnitLabel": "m", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:metersOfWaterColumn", | |
"UnitLabel": "mH2O", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:metersOfWaterColumnPerMeter", | |
"UnitLabel": "mH2O/m", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:metersPerKilonewton", | |
"UnitLabel": "m/kN", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:metersPerSecond", | |
"UnitLabel": "m/s", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:metersPerSecondSquared", | |
"UnitLabel": "m/s²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:metersToTheFourthPower", | |
"UnitLabel": "m⁴", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:metersToTheSixthPower", | |
"UnitLabel": "m⁶", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:microinchesPerInchDegreeFahrenheit", | |
"UnitLabel": "µin/(in·°F)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:micrometersPerMeterDegreeCelsius", | |
"UnitLabel": "µm/(m·°C)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:miles", | |
"UnitLabel": "mi", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:milesPerHour", | |
"UnitLabel": "mph", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:milesPerSecond", | |
"UnitLabel": "mi/s", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:milesPerSecondSquared", | |
"UnitLabel": "mi/s²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:milliamperes", | |
"UnitLabel": "mA", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:milligrams", | |
"UnitLabel": "mg", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:millimeters", | |
"UnitLabel": "mm", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:millimetersOfMercury", | |
"UnitLabel": "mmHg", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:millimetersOfWaterColumn", | |
"UnitLabel": "mmH2O", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:millimetersOfWaterColumnPerMeter", | |
"UnitLabel": "mmH2O/m", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:millimetersToTheFourthPower", | |
"UnitLabel": "mm⁴", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:millimetersToTheSixthPower", | |
"UnitLabel": "mm⁶", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:milliseconds", | |
"UnitLabel": "ms", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:millivolts", | |
"UnitLabel": "mV", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:minutes", | |
"UnitLabel": "min", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:nanograms", | |
"UnitLabel": "ng", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:nanogramsPerPascalSecondSquareMeter", | |
"UnitLabel": "ng/(Pa·s·m²)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:newtonMeters", | |
"UnitLabel": "N-m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:newtonMetersPerMeter", | |
"UnitLabel": "N-m/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:newtonSecondsPerSquareMeter", | |
"UnitLabel": "N·s/m²", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:newtons", | |
"UnitLabel": "N", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:newtonsPerMeter", | |
"UnitLabel": "N/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:newtonsPerSquareMeter", | |
"UnitLabel": "N/m²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:newtonsPerSquareMillimeter", | |
"UnitLabel": "N/mm²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:ohmMeters", | |
"UnitLabel": "ohm·m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:ohms", | |
"UnitLabel": "ohm", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:pascalSeconds", | |
"UnitLabel": "Pa-s", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:pascals", | |
"UnitLabel": "Pa", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:pascalsPerMeter", | |
"UnitLabel": "Pa/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:perMille", | |
"UnitLabel": "‰", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:percentage", | |
"UnitLabel": "%", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:pi", | |
"UnitLabel": "π", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poises", | |
"UnitLabel": "P", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundForceFeet", | |
"UnitLabel": "lb-ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundForceFeetPerFoot", | |
"UnitLabel": "lb-ft/ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundForceSecondsPerSquareFoot", | |
"UnitLabel": "lb·s/ft²", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundMassDegreesFahrenheit", | |
"UnitLabel": "lb·°F", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsForce", | |
"UnitLabel": "lb", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsForcePerCubicFoot", | |
"UnitLabel": "lb/ft³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsForcePerFoot", | |
"UnitLabel": "lb/ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsForcePerSquareFoot", | |
"UnitLabel": "lb/ft²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsForcePerSquareInch", | |
"UnitLabel": "lb/in²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsMass", | |
"UnitLabel": "lb", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsMassPerCubicFoot", | |
"UnitLabel": "lb/ft³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsMassPerCubicInch", | |
"UnitLabel": "lb/in³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsMassPerFoot", | |
"UnitLabel": "lb/ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsMassPerFootHour", | |
"UnitLabel": "lb/ft-h", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsMassPerFootSecond", | |
"UnitLabel": "lb/ft-s", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsMassPerHour", | |
"UnitLabel": "lb/h", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsMassPerMinute", | |
"UnitLabel": "lb/min", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsMassPerPoundDegreeFahrenheit", | |
"UnitLabel": "lb/(lb·°F)", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsMassPerSecond", | |
"UnitLabel": "lb/s", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:poundsMassPerSquareFoot", | |
"UnitLabel": "lb/ft²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:radians", | |
"UnitLabel": "rad", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:radiansPerSecond", | |
"UnitLabel": "rad/s", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:rankine", | |
"UnitLabel": "°R", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:rankineInterval", | |
"UnitLabel": "°R", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:ratioTo1", | |
"UnitLabel": ":1", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:ratioTo10", | |
"UnitLabel": ":10", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:ratioTo12", | |
"UnitLabel": ":12", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:revolutionsPerMinute", | |
"UnitLabel": "RPM", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:revolutionsPerSecond", | |
"UnitLabel": "RPS", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:seconds", | |
"UnitLabel": "s", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareCentimeters", | |
"UnitLabel": "cm²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareCentimetersPerMeter", | |
"UnitLabel": "cm²/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareFeet", | |
"UnitLabel": "ft²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareFeetPer1000BritishThermalUnitsPerHour", | |
"UnitLabel": "ft²·h/kBtu", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareFeetPerFoot", | |
"UnitLabel": "ft²/ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareFeetPerKip", | |
"UnitLabel": "ft²/kip", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareFeetPerSecond", | |
"UnitLabel": "ft²/s", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareFeetPerTonOfRefrigeration", | |
"UnitLabel": "ft²/ton", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareHectometers", | |
"UnitLabel": "hm²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareInches", | |
"UnitLabel": "in²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareInchesPerFoot", | |
"UnitLabel": "in²/ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareMeterKelvinsPerWatt", | |
"UnitLabel": "(m²·K)/W", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareMeters", | |
"UnitLabel": "m²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareMetersPerKilonewton", | |
"UnitLabel": "m²/kN", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareMetersPerKilowatt", | |
"UnitLabel": "m²/kW", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareMetersPerMeter", | |
"UnitLabel": "m²/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareMetersPerSecond", | |
"UnitLabel": "m²/s", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareMillimeters", | |
"UnitLabel": "mm²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareMillimetersPerMeter", | |
"UnitLabel": "mm²/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareYards", | |
"UnitLabel": "yd²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:standardGravity", | |
"UnitLabel": "𝘨", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:steradians", | |
"UnitLabel": "sr", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:therms", | |
"UnitLabel": "therm", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:thousandBritishThermalUnitsPerHour", | |
"UnitLabel": "MBH", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:tonneForceMeters", | |
"UnitLabel": "Tf-m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:tonneForceMetersPerMeter", | |
"UnitLabel": "Tf-m/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:tonnes", | |
"UnitLabel": "t", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:tonnesForce", | |
"UnitLabel": "Tf", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:tonnesForcePerMeter", | |
"UnitLabel": "Tf/m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:tonnesForcePerSquareMeter", | |
"UnitLabel": "Tf/m²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:tonsOfRefrigeration", | |
"UnitLabel": "ton", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:turns", | |
"UnitLabel": "tr", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:usGallons", | |
"UnitLabel": "gal", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:usGallonsPerHour", | |
"UnitLabel": "gal/h", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:usGallonsPerMinute", | |
"UnitLabel": "gal/min", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:usSurveyFeet", | |
"UnitLabel": "USft", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:usTonnesForce", | |
"UnitLabel": "STf", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:usTonnesMass", | |
"UnitLabel": "ST", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:voltAmperes", | |
"UnitLabel": "VA", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:volts", | |
"UnitLabel": "V", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:watts", | |
"UnitLabel": "W", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:wattsPerCubicFoot", | |
"UnitLabel": "W/ft³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:wattsPerCubicFootPerMinute", | |
"UnitLabel": "W·min/ft³", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:wattsPerCubicMeter", | |
"UnitLabel": "W/m³", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:wattsPerCubicMeterPerSecond", | |
"UnitLabel": "W·s/m³", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:wattsPerFoot", | |
"UnitLabel": "W/ft", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:wattsPerMeter", | |
"UnitLabel": "W/m", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:wattsPerMeterKelvin", | |
"UnitLabel": "W/(m·K)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:wattsPerSquareFoot", | |
"UnitLabel": "W/ft²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:wattsPerSquareMeter", | |
"UnitLabel": "W/m²", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:wattsPerSquareMeterKelvin", | |
"UnitLabel": "W/(m²·K)", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:yards", | |
"UnitLabel": "yd", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:slopeDegrees", | |
"UnitLabel": "°", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:ampereHours", | |
"UnitLabel": "A-h", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:ampereSeconds", | |
"UnitLabel": "A-s", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:circularMils", | |
"UnitLabel": "cmil", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:coulombs", | |
"UnitLabel": "C", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:dynes", | |
"UnitLabel": "dyn", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:ergs", | |
"UnitLabel": "erg", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:farads", | |
"UnitLabel": "F", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:feetPerKipFoot", | |
"UnitLabel": "ft/kip-ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:gammas", | |
"UnitLabel": "gamma", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:gauss", | |
"UnitLabel": "Gs", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:henries", | |
"UnitLabel": "H", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:maxwells", | |
"UnitLabel": "Mx", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:metersPerKilonewtonMeter", | |
"UnitLabel": "m/kN-m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:mhos", | |
"UnitLabel": "mho", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:microns", | |
"UnitLabel": "micron", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:mils", | |
"UnitLabel": "mil", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:nauticalMiles", | |
"UnitLabel": "M", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:oersteds", | |
"UnitLabel": "Oe", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:ouncesForce", | |
"UnitLabel": "ozf", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:ouncesMass", | |
"UnitLabel": "oz", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:siemens", | |
"UnitLabel": "S", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:slugs", | |
"UnitLabel": "slug", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareFeetPerKipFoot", | |
"UnitLabel": "ft²/kip-ft", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareMetersPerKilonewtonMeter", | |
"UnitLabel": "m²/kN-m", | |
"Version": "1.0.1" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:squareMils", | |
"UnitLabel": "mil^2", | |
"Version": "1.0.0" | |
}, | |
{ | |
"TypeId": "autodesk.unit.unit:webers", | |
"UnitLabel": "Wb", | |
"Version": "1.0.0" | |
} | |
] |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment