Created
November 27, 2019 16:06
-
-
Save cleverca22/5024fdc6f14b56408de0257de379b767 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Raspberry Pi Bootcode | |
Read File: config.txt, 1810 | |
Read File: start.elf, 2877988 (bytes) | |
Read File: fixup.dat, 6736 (bytes) | |
MESS:00:00:01.409159:0: brfs: File read: /mfs/sd/config.txt | |
MESS:00:00:01.413989:0: brfs: File read: 1810 bytes | |
MESS:00:00:01.469955:0: brfs: File read: /mfs/sd/config.txt | |
MESS:00:00:01.474759:0: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined | |
MESS:00:00:01.491089:0: gpioman: gpioman_get_pin_num: pin WL_LPO_CLK not defined | |
MESS:00:00:01.496792:0: gpioman: gpioman_get_pin_num: pin BT_ON not defined | |
MESS:00:00:01.503472:0: gpioman: gpioman_get_pin_num: pin WL_ON not defined | |
MESS:00:00:01.684755:0: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined | |
MESS:00:00:01.692180:0: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined | |
MESS:00:00:01.698203:0: *** Restart logging | |
MESS:00:00:01.702091:0: brfs: File read: 1810 bytes | |
MESS:00:00:01.723510:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead | |
MESS:00:00:01.734036:0: brfs: File read: /mfs/sd/cmdline.txt | |
MESS:00:00:01.738024:0: Read command line from file 'cmdline.txt': | |
MESS:00:00:01.743898:0: 'console=serial0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait' | |
MESS:00:00:01.761311:0: Trying Device Tree file 'bcm2709-rpi-2-b.dtb' | |
MESS:00:00:01.766054:0: brfs: File read: 121 bytes | |
MESS:00:00:01.775700:0: brfs: File read: /mfs/sd/bcm2709-rpi-2-b.dtb | |
MESS:00:00:01.780363:0: Loading 'bcm2709-rpi-2-b.dtb' to 0x100 size 0x62cd | |
MESS:00:00:01.804776:0: dtdebug: delete_node(/__local_fixups__) | |
MESS:00:00:01.819012:0: dtdebug: /aliases:i2c_vc=i2c0 | |
MESS:00:00:01.832322:0: dtdebug: /__symbols__:i2c_vc=i2c0 | |
MESS:00:00:01.843439:0: dtdebug: /__overrides__:i2c_vc=i2c0 | |
MESS:00:00:01.861630:0: dtdebug: /__overrides__:i2c_vc_baudrate=i2c0_baudrate | |
MESS:00:00:01.871584:0: dtdebug: /aliases:i2c=i2c1 | |
MESS:00:00:01.884833:0: dtdebug: /__symbols__:i2c=i2c1 | |
MESS:00:00:01.895733:0: dtdebug: /__overrides__:i2c=i2c1 | |
MESS:00:00:01.903887:0: dtdebug: /aliases:i2c_arm=i2c1 | |
MESS:00:00:01.917496:0: dtdebug: /__symbols__:i2c_arm=i2c1 | |
MESS:00:00:01.928785:0: dtdebug: /__overrides__:i2c_arm=i2c1 | |
MESS:00:00:01.947238:0: dtdebug: /__overrides__:i2c_baudrate=i2c1_baudrate | |
MESS:00:00:01.966885:0: dtdebug: /__overrides__:i2c_arm_baudrate=i2c1_baudrate | |
MESS:00:00:01.972407:0: dtparam: pwr_led_gpio=35 | |
MESS:00:00:01.982053:0: dtdebug: Found override pwr_led_gpio | |
MESS:00:00:01.986046:0: dtdebug: override pwr_led_gpio: cell target gpios @ offset 4 (size 4) | |
MESS:00:00:02.009229:0: dtparam: uart0_clkrate=48000000 | |
MESS:00:00:02.018044:0: dtdebug: /__overrides__ has no uart0_clkrate property | |
MESS:00:00:02.023487:0: Unknown dtparam 'uart0_clkrate' - ignored | |
MESS:00:00:02.029297:0: brfs: File read: 25293 bytes | |
MESS:00:00:02.037600:0: brfs: File read: /mfs/sd/config.txt | |
MESS:00:00:02.042071:0: dtparam: audio=on | |
MESS:00:00:02.050395:0: dtdebug: Found override audio | |
MESS:00:00:02.053761:0: dtdebug: override audio: string target 'status' | |
MESS:00:00:04.123897:0: dtparam: cam0-pwdn=41 | |
MESS:00:00:04.131676:0: dtdebug: Found override cam0-pwdn | |
MESS:00:00:04.135389:0: dtparam: cam0-led=32 | |
MESS:00:00:04.144455:0: dtdebug: Found override cam0-led | |
MESS:00:00:04.148070:0: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined | |
MESS:00:00:04.155300:0: dtparam: arm_freq=900000000 | |
MESS:00:00:04.164965:0: dtdebug: Found override arm_freq | |
MESS:00:00:04.168606:0: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4) | |
MESS:00:00:04.191167:0: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4) | |
MESS:00:00:04.212385:0: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4) | |
MESS:00:00:04.233679:0: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4) | |
MESS:00:00:04.255213:0: dtparam: core_freq=250000000 | |
MESS:00:00:04.263854:0: dtdebug: /__overrides__ has no core_freq property | |
MESS:00:00:04.268936:0: Unknown dtparam 'core_freq' - ignored | |
MESS:00:00:04.286725:0: dtdebug: delete_node(/hat) | |
MESS:00:00:04.301553:0: brfs: File read: 1810 bytes | |
MESS:00:00:04.672274:0: brfs: File read: /mfs/sd/kernel7.img | |
MESS:00:00:04.676240:0: Loading 'kernel7.img' to 0x8000 size 0x5108a0 | |
MESS:00:00:04.682411:0: Device tree loaded to 0x2eff9900 (size 0x6690) | |
MESS:00:00:04.689548:0: uart: Set PL011 baud rate to 103448.300000 Hz | |
MESS:00:00:04.696364:0: uart: Baud rate change done... | |
MESS:00:00:04.699794:0: uart: Baud rate change done... | |
MESS:00:00:04.705448:0: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined | |
MESS:00:00:06.336221:0: vchiq_core: vchiq_init_state: slot_zero = 0xfad80000, is_master = 1 | |
MESS:00:00:06.347521:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead | |
MESS:00:00:06.360281:0: TV service:host side not connected, dropping notification 0x00000002, 0x00000002, 0x00000023 | |
[ 0.000000] Booting Linux on physical CPU 0xf00 | |
[ 0.000000] Linux version 4.19.75-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1270 SMP Tue Sep 24 18:45:11 BST 2019 | |
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment