Libretiny/ESPHome config for Deta 6922HA Series 2 smart dual outlet

deta_6922ha_2.yml

# Note that the passwords etc. in this example are completely bogus.
substitutions:
  name: "deta-6922ha-01"
  friendly_name: "Dual outlet"
  project_name: "DETA.6922HA"
  project_version: "1.0"
  device_description: "Indoor 2 gang outlet"

esphome:
  name: "${name}"
  comment: "${device_description}"
  project:
    name: "${project_name}"
    version: "${project_version}"

libretiny:
  board: wb3s
  framework:
    version: dev

# Enable logging
logger:

wifi:
  ssid: "YourWiFiHere"
  password: "makeUpYourOwn"

  # Enable fallback hotspot in case wifi connection fails
  ap:
    ssid: "Fallback Hotspot"
    password: "thisIsNotMine"
    

# Enable Home Assistant API
api:
  encryption:
    key: "3G75RRso25WauylmKAP4jVn+SATtafIvwkeOtATcxro="

ota:
  password: "Outlet"

captive_portal:

sensor:
  - platform: wifi_signal
    name: "${friendly_name} wifi signal"
    update_interval: 600s
  - platform: uptime
    name: Uptime Sensor
    id: uptime_sensor
    update_interval: 60s
    disabled_by_default: true
    on_raw_value:
      then:
        - text_sensor.template.publish:
            id: uptime_human
            state: !lambda |-
              int seconds = round(id(uptime_sensor).raw_state);
              int days = seconds / (24 * 3600);
              seconds = seconds % (24 * 3600);
              int hours = seconds / 3600;
              seconds = seconds % 3600;
              int minutes = seconds /  60;
              seconds = seconds % 60;
              return (
                (days ? to_string(days) + "d " : "") +
                (hours ? to_string(hours) + "h " : "") +
                (minutes ? to_string(minutes) + "m " : "") +
                (to_string(seconds) + "s")
              ).c_str();

status_led:
  pin:
    number: GPIO9
    inverted: True

switch:
  # left socket relay
  - platform: gpio
    pin: GPIO6
    id: relay1
  # Right relay
  - platform: gpio
    pin: GPIO26
    id: relay2
  - platform: template
    name: "${friendly_name} Left Socket"
    id: relay_template1
    lambda: |-
      if (id(relay1).state) {
        return true;
      } else {
        return false;
      }
    turn_on_action:
      - switch.turn_on: relay1
    turn_off_action:
      - switch.turn_off: relay1

  - platform: template
    name: "${friendly_name} Right Socket"
    id: relay_template2
    lambda: |-
      if (id(relay2).state) {
        return true;
      } else {
        return false;
      }
    turn_on_action:
      - switch.turn_on: relay2
    turn_off_action:
      - switch.turn_off: relay2

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO14
      mode: INPUT
      inverted: True
    id: button1
    name: "${friendly_name} Left Button"
    on_click:
      - min_length: 300ms
        max_length: 1000ms
        then:
          - switch.toggle: relay_template1
    internal: True
  - platform: gpio
    pin:
      number: GPIO24
      mode: INPUT
      inverted: True
    id: button2
    name: "${friendly_name} Right Button"
    on_click:
      - min_length: 300ms
        max_length: 1000ms
        then:
          - switch.toggle: relay_template2
    internal: True

button:
  - platform: restart
    id: restart_button
    name: "${friendly_name} Restart"
    disabled_by_default: true

text_sensor:
  - platform: wifi_info
    ip_address:
      name: "${friendly_name} IP Address"
      disabled_by_default: true
    bssid:
      name: "${friendly_name} BSSID"
      disabled_by_default: true
  - platform: template
    name: Uptime
    id: uptime_human
    icon: mdi:clock-start