| #Cracking an FTP server (use whatever service you want THC Hydra supports lots! | |
| hydra -L wordlist.txt -P passlist.txt 192.168.1.1 ftp | |
| #Other handy THC Hydra commands~! | |
| #Log in to ftp service with -l user and -p password: | |
| ./hydra -l john -p doe 192.168.0.1 ftp | |
| #Log in to IMAP service using user wordlist with -L user.txt and the password -p secret: | |
| ./hydra -L user.txt -p secret 192.168.0.1 imap PLAIN | |
####Un-Root Accept HTC OTA, then Re-Root Again, In 15 Minutes
Download: http://goo-inside.me/shooter/ruu/2.08.651.2
Rename the file to PG86IMG.zip then mount phone as drive and copy zip file to /sdcard/
Then open cmd prompt (Win32) or terminal (Linux/OSX) and carefully type:
| Tested/Working: | |
| ##775# - EPST/PRL - PRL Settings | |
| ##786# - EPST - Status Menu | |
| ##3282# - EPST - Data Programming Menu (User Name, Advanced, Restore, Enable HFA, DSA Server, MMSC URL) | |
| ##33284# - Debug - Debug Menu – (Debug Screen, Test Calls, RC Data, HDR/1X Selection, Voice Privacy, DTMF Set, Korea Mode Set) | |
| ##3424# - Diagnostic - Connect to phone in diag mode | |
| ##2539# - EPST/A-Key - Data A key menu | |
| ##7738# - EPST/P_Rev - Protocol Revision | |
| ##8626337# - EPST/Vocoder - Unsure | |
| ##4772579# - Reset the GPS |
| #!/system/bin/sh | |
| echo "98" > /sys/devices/system/cpu/cpufreq/pegasusq/up_threshold | |
| echo "80" > /sys/devices/system/cpu/cpufreq/pegasusq/up_threshold_at_min_freq | |
| echo "30000" > /sys/devices/system/cpu/cpufreq/pegasusq/sampling_rate | |
| echo "1" > /sys/devices/system/cpu/cpufreq/pegasusq/sampling_down_factor | |
| echo "5" > /sys/devices/system/cpu/cpufreq/pegasusq/down_differential | |
| echo "4" > /sys/devices/system/cpu/cpufreq/pegasusq/freq_step | |
| echo "384000" > /sys/devices/system/cpu/cpufreq/pegasusq/freq_for_responsiveness | |
| echo "15" > /sys/devices/system/cpu/cpufreq/pegasusq/cpu_up_rate |
| (转）creating binary patch files (.p files) with bsdiff | |
| I was looking through a .602 update.zip and noticed the .p files; I opened one up in notepad++ and saw that the file begins with "bsdiff" so did a search and found this tool: | |
| http://www.daemonology.net/bsdiff/ | |
| bsdiff takes an original file and a modified file as input and creates a binary patch file. | |
| bspatch takes an original file and a patch file as input and creates a modified file. | |
| usage (windows): |
| Password hashes are stored in the registry, in the key HKLM\Security\Sam. Normally you must have administrator privileges to access it. Even you are the local admin – you still have to assign manually full control permission for this subkey to yourself. | |
| The juicy stuff physically is stored in two files: | |
| C:\windows\system32\config\sam | |
| and | |
| C:\windows\system32\config\system | |
| http://www.codeproject.com/KB/files/FDump.aspx is a tool that can dump file sectors directly from disk using logical offsets. | |
| C:\windows\system32\config\sam and C:\windows\system32\config\system in target system (the second one is needed because of the “boot key” is stored there) so then we may process it somewhere else with Cain & Abel. |
| Without CDMA Workshop or QPST: | |
| http://androidforums.com/boost-mobile-warp-all-things-root/532142-guide-how-change-your-msl-prl-not-cdma-workshop.html#post4232529 | |
| Using QPST: | |
| (Change Sprint Banner in Firmware how to, including QPST set up) | |
| 1. Install HTC Sync if you haven't already. | |
| 2. Use the CDMA Method posted Here to get your MSL. Thanks techwerkz - Or Call Sprint. Another alternative would be to gain temp root and use MSL Reader from the market. | |
| 3. Download QPST: | |
| http://www.x-drivers.com/catalog/flash/mobile_phones/companies/qualcomm/models/qpst/12051/download.html | |
| 4. Install QPST software |
| rundll32.exe keymgr.dll, KRShowKeyMgr |
| So run off and install git on your Linux system using the package | |
| manager you are comfortable with (personally, I use openSUSE, and a | |
| simple 'zypper install git' does everything that is needed.) | |
| Then start by cloning the main Linux kernel repository: | |
| $ mkdir ~/linux | |
| $ cd ~/linux | |
| $ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git |
Boot to Gecko aims to create a complete, standalone operating system for the open web.
You can read more about B2G here:
follow us on twitter: @Boot2Gecko