Christopher McCormack cmccormack

## 0-Introduction.txt
A workflow of working with pull-requests.

Following this you should be able to:
 - review, QA, test PRs locally
 - update PRs on freeCodeCamp's repository.

## 0. Synology RAID Expansion-Resync Performance.md

      
              4 files
            
          
              13 forks
            
          
              25 comments
            
          
              83 stars
            
          
                fbartho
                / 0. Synology RAID Expansion-Resync Performance.md
            
            
              Last active
              July 17, 2024 22:08
            
              
                Walkthrough of what I did to increase performance on my Synology NAS box during an expansion, and afterwards.
              
          
    Performance on Synology RAIDs

(especially while expanding)

Warning: The exact commands may not match for your particular linux OS / Synology(NAS) device. I had to customize the commands after exploring my particular system's setup.

If you're new to linux, or this is a new piece of hardware / a new synology device, jump down to the section called "Inspecting a setup"
Contents


## python_decorator_guide.md

      
              1 file
            
          
              135 forks
            
          
              31 comments
            
          
              599 stars
            
          
                Zearin
                / python_decorator_guide.md
            
            
              Last active
              July 24, 2024 03:06
            
              
                The best explanation of Python decorators I’ve ever seen. (An archived answer from StackOverflow.)
              
          
    NOTE: This is a question I found on StackOverflow which I’ve archived here, because the answer is so effing phenomenal.

Q: How can I make a chain of function decorators in Python?


If you are not into long explanations, see [Paolo Bergantino’s answer][2].
	A workflow of working with pull-requests.

	Following this you should be able to:
	- review, QA, test PRs locally
	- update PRs on freeCodeCamp's repository.