Created
March 29, 2022 10:07
-
-
Save cmoz/58116e6874c7d4e9591715a292660879 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#include <Wire.h> //include Wire.h to be able to communicate through I2C on Arduino board | |
#include "Adafruit_TCS34725.h" //Colour sensor library | |
#include "Adafruit_GFX.h" | |
#include "Adafruit_SSD1306.h" | |
#include "Adafruit_NeoPixel.h" | |
//Create colour sensor object declaration, to see effects of different integration time and gain | |
//settings, check the datatsheet of the Adafruit TCS34725. | |
Adafruit_TCS34725 tcs = Adafruit_TCS34725(TCS34725_INTEGRATIONTIME_50MS, TCS34725_GAIN_4X); | |
#define SCREEN_WIDTH 128 // OLED display width, in pixels | |
#define SCREEN_HEIGHT 64 // OLED display height, in pixels | |
#define LED_PIN 10 | |
#define LED_COUNT 25 | |
Adafruit_NeoPixel strip(LED_COUNT, LED_PIN, NEO_GRB + NEO_KHZ800); | |
// declare an SSD1306 display object connected to I2C | |
Adafruit_SSD1306 oled(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, -1); | |
void setup() { | |
Serial.begin(9600); | |
// initialize OLED display with address 0x3C for 128x64 | |
if (!oled.begin(SSD1306_SWITCHCAPVCC, 0x3C)) { | |
Serial.println(F("SSD1306 allocation failed")); | |
while (true); | |
} | |
delay(2000); // wait for initializing | |
oled.clearDisplay(); // clear display | |
//Start-up colour sensor | |
if (tcs.begin()) { | |
Serial.println("Found sensor"); | |
} else { | |
Serial.println("No TCS34725 found ... check your connections"); | |
while (1); // halt! | |
} | |
strip.begin(); // INITIALIZE NeoPixel strip object (REQUIRED) | |
strip.show(); // Turn OFF all pixels ASAP | |
strip.setBrightness(50); // Set BRIGHTNESS to about 1/5 (max = 255) | |
} | |
void loop() { | |
uint16_t clear, red, green, blue; | |
//Collect raw data from integrated circuit using interrupts | |
tcs.setInterrupt(false); // turn on LED | |
delay(60); // takes 50ms to read | |
tcs.getRawData(&red, &green, &blue, &clear); | |
tcs.setInterrupt(true); // turn off LED | |
// Figure out some basic hex code for visualization | |
uint32_t sum = clear; | |
float r, g, b; | |
r = red; | |
r /= sum; | |
g = green; | |
g /= sum; | |
b = blue; | |
b /= sum; | |
r *= 256; g *= 256; b *= 256; | |
Serial.print("HEX: \t"); | |
Serial.print((int)r, HEX); Serial.print((int)g, HEX); Serial.print((int)b, HEX); | |
Serial.print("\t \t RGB: \t"); | |
Serial.print((int)r ); | |
Serial.print(" "); | |
Serial.print((int)g); | |
Serial.print(" "); | |
Serial.println((int)b ); | |
Serial.println(); | |
colorWipe(strip.Color(r, g, b), 50); | |
oled.clearDisplay(); // clear displa | |
oled.setTextSize(2); // text size | |
oled.setTextColor(WHITE); // text color | |
oled.setCursor(2, 10); // position to display | |
oled.println("HEX:"); | |
oled.setCursor(50, 10); // position to display | |
oled.println((int)r, HEX); | |
oled.setCursor(74, 10); // position to display | |
oled.println((int)g, HEX); | |
oled.setCursor(98, 10); // position to display | |
oled.println((int)b, HEX); // text to display | |
oled.display(); // show on OLED | |
delay(5000); | |
} | |
void colorWipe(uint32_t color, int wait) { | |
for(int i=0; i<strip.numPixels(); i++) { // For each pixel in strip... | |
strip.setPixelColor(i, color); // Set pixel's color (in RAM) | |
strip.show(); // Update strip to match | |
delay(wait); // Pause for a moment | |
} | |
} |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment