Skip to content

Instantly share code, notes, and snippets.

@codekipper

codekipper/mele_a1000g.fex

Created August 26, 2014 14:41
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save codekipper/997dc301613085e0def5 to your computer and use it in GitHub Desktop.
Save codekipper/997dc301613085e0def5 to your computer and use it in GitHub Desktop.
Download ZIP
Mele A1000G Fex
Raw
mele_a1000g.fex
;A31 PAD application
;---------------------------------------------------------------------------------------------------------
; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
; 描述gpio的形式：Port:端口+组内序号<功能分配><内部电阻状态><驱动能力><输出电平状态>
;---------------------------------------------------------------------------------------------------------
[product]
version = "100"
machine = "evb"
[platform]
eraseflag = 1
;----------------------------------------------------------------------------------
; system configuration
; ?
;dcdc1_vol ---set dcdc1 voltage,mV,1600-3400,100mV/step
;dcdc2_vol ---set dcdc2 voltage,mV,600-1540,20mV/step
;dcdc3_vol ---set dcdc3 voltage,mV,600-1860,20mV/step
;dcdc4_vol ---set dcdc4 voltage,mV,600-1540,20mV/step
;dcdc5_vol ---set dcdc5 voltage,mV,1000-2550,50mV/step
;aldo2_vol ---set aldo2 voltage,mV,700-3300,100mV/step
;aldo3_vol ---set aldo3 voltage,mV,700-3300,100mV/step
;----------------------------------------------------------------------------------
[target]
boot_clock = 1008
storage_type = -1
[boot_init_gpio]
use = 1
[power_sply]
dcdc1_vol = 3300
dcdc2_vol = 1200
dcdc3_vol = 1260
dcdc4_vol = 1240
dcdc5_vol = 1500
aldo2_vol = 1800
aldo3_vol = 3000
[card_boot]
logical_start = 40960
sprite_gpio0 = port:PH13<1><default><default><0>
sprite_work_delay = 500
sprite_err_delay = 200
[mele_uboot]
blue_light = port:PH13<1><default><default><1>
[card0_boot_para]
card_ctrl = 0
card_high_speed = 1
card_line = 4
sdc_d1 = port:PF0<2><1><default><default>
sdc_d0 = port:PF1<2><1><default><default>
sdc_clk = port:PF2<2><1><default><default>
sdc_cmd = port:PF3<2><1><default><default>
sdc_d3 = port:PF4<2><1><default><default>
sdc_d2 = port:PF5<2><1><default><default>
[card2_boot_para]
card_ctrl = 2
card_high_speed = 1
card_line = 4
sdc_cmd = port:PC6<3><1><default><default>
sdc_clk = port:PC7<3><1><default><default>
sdc_d0 = port:PC8<3><1><default><default>
sdc_d1 = port:PC9<3><1><default><default>
sdc_d2 = port:PC10<3><1><default><default>
sdc_d3 = port:PC11<3><1><default><default>
[twi_para]
twi_port = 0
twi_scl = port:PH14<2><default><default><default>
twi_sda = port:PH15<2><default><default><default>
[uart_para]
uart_debug_port = 0
uart_debug_tx = port:PH20<2><1><default><default>
uart_debug_rx = port:PH21<2><1><default><default>
[jtag_para]
jtag_enable = 0
jtag_ms = port:PH9<3><default><default><default>
jtag_ck = port:PH10<3><default><default><default>
jtag_do = port:PH11<3><default><default><default>
jtag_di = port:PH12<3><default><default><default>
[clock]
pll3 = 297
pll4 = 300
pll6 = 600
pll7 = 297
pll8 = 360
pll9 = 297
pll10 = 702
;*****************************************************************************
;sdram configuration
;
;*****************************************************************************
[dram_para]
dram_clk = 312
dram_type = 3
dram_zq = 0x78
dram_odt_en = 0
dram_para1 = 0x10F40800
dram_para2 = 0x1211
dram_mr0 = 0x1A50
dram_mr1 = 0x4
dram_mr2 = 0x18
dram_mr3 = 0
dram_tpr0 = 0
dram_tpr1 = 0x80000800
dram_tpr2 = 0x39a70140
dram_tpr3 = 0xa092e74c
dram_tpr4 = 0x2948c209
dram_tpr5 = 0x8944422c
dram_tpr6 = 0x30028480
dram_tpr7 = 0x2a3297
dram_tpr8 = 0x5034fa8
dram_tpr9 = 0x36353d8
dram_tpr10 = 0
dram_tpr11 = 0
dram_tpr12 = 0
dram_tpr13 = 0x10000
;----------------------------------------------------------------------------------
;os life cycle para configuration
;----------------------------------------------------------------------------------
;---------------------------------------------------------------------------------------------------------
; if 1 == standby_mode, then support super standby;
; else, support normal standby.
;---------------------------------------------------------------------------------------------------------
[pm_para]
standby_mode = 1
;---------------------------------------------------------------------------------------------------------
; wakeup_src_para:
; sometimes, u would like to add more wakeup src in standby mode, these para will be
; help;
; u need to make sure the standby mode support the wakeup src. Also, some hw
; condition must be guaranteed.
; including:
; cpu_en: power on or off.
; 1: mean power on
; 0: mean power off
; cpu_freq: indicating lowest freq. unit is Mhz;
; dram selfresh_en: selfresh or not.
; 1: enable enter selfresh
; 0: disable enter selfresh
; dram_pll: if not enter selfresh, indicating lowest freq. unit is Mhz;
; wakeup_event:
; (0x4 ) /* low battery event */
; (0x8 ) /* usb insert event */
; (0x10 ) /* charger insert event */
; (0x20 ) /* power key ascend event */
; (0x40 ) /* power key descend event */
; (0x80 ) /* power key short press event */
; (0x100 ) /* power key long press event */
; (0x200 ) /* IR key event */
; (0x400 ) /* alarm0 event */
; (0x800 ) /* alarm1 event */
; (0x1000 ) /* debug test event */
; (0x2000 ) /* GPIO interrupt event, only used in extended standby */
; (0x4000 ) /* USBMOUSE key event, only used in extended standby */
; (0x8000 ) /* key event, volume home menu enter, only used in extended standby */
; (0x10000) /* earphone insert/pull event, only used in extended standby */
; (0x180 ) /* power key short and long press event */
; wakeup_src: to make the scenario work, the wakeup src is needed.
;---------------------------------------------------------------------------------------------------------
[wakeup_src_para]
cpu_en = 0
cpu_freq = 48
; (cpu:apb:ahb)
pll_ratio = 0x111
dram_selfresh_en = 1
dram_freq = 36
wakeup_event =
wakeup_src0 = port:PL5<2><1><default><default>
;------------------------------------------------------------------------------;
; 10/100/100Mbps Ethernet MAC Controller Configure ;
;------------------------------------------------------------------------------;
; 配置选项： ;
; gmac_used --- 1: gmac used, 0: not used ;
;------------------------------------------------------------------------------;
; gmac_interface --- 1: PHY_INTERFACE_MODE_MII ;
; 2: PHY_INTERFACE_MODE_GMII ;
; 3: PHY_INTERFACE_MODE_RGMII ;
; default: PHY_INTERFACE_MODE_MII ;
;------------------------------------------------------------------------------;
; MII GMII RGMII MII GMII RGMII MII GMII RGMII ;
;PA00~03 * * * PA10 * * PA20 * * * ;
; PA04 * PA11~14 * * * PA21 * * ;
; PA05 * PA15 * PA22 * * ;
; PA06 * PA16 * PA23 * * ;
; PA07 * PA17 * PA24 * * ;
; PA08 * * PA18 * PA25 * * ;
; PA09 * * * PA19 * * * PA26~27 * * * ;
;------------------------------------------------------------------------------;
[gmac_para]
gmac_used = 1
gmac_interface = 1
gmac_power = "axp22_dldo1"
gmac_txd0 = port:PA00<2><default><default><default>
gmac_txd1 = port:PA01<2><default><default><default>
gmac_txd2 = port:PA02<2><default><default><default>
gmac_txd3 = port:PA03<2><default><default><default>
gmac_txd4 =
gmac_txd5 =
gmac_txd6 =
gmac_txd7 =
gmac_txclk = port:PA08<2><default><default><default>
gmac_txen = port:PA09<2><default><default><default>
gmac_gtxclk =
gmac_rxd0 = port:PA11<2><default><default><default>
gmac_rxd1 = port:PA12<2><default><default><default>
gmac_rxd2 = port:PA13<2><default><default><default>
gmac_rxd3 = port:PA14<2><default><default><default>
gmac_rxd4 =
gmac_rxd5 =
gmac_rxd6 =
gmac_rxd7 =
gmac_rxdv = port:PA19<2><default><default><default>
gmac_rxclk = port:PA20<2><default><default><default>
gmac_txerr = port:PA21<2><default><default><default>
gmac_rxerr = port:PA22<2><default><default><default>
gmac_col = port:PA23<2><default><default><default>
gmac_crs = port:PA24<2><default><default><default>
gmac_clkin =
gmac_mdc = port:PA26<2><default><default><default>
gmac_mdio = port:PA27<2><default><default><default>
;----------------------------------------------------------------------------------
;i2c configuration
;----------------------------------------------------------------------------------
[twi0_para]
twi_used = 1
twi_scl = port:PH14<2><default><default><default>
twi_sda = port:PH15<2><default><default><default>
[twi1_para]
twi_used = 1
twi_scl = port:PH16<2><default><default><default>
twi_sda = port:PH17<2><default><default><default>
[twi2_para]
twi_used = 1
twi_scl = port:PH18<2><default><default><default>
twi_sda = port:PH19<2><default><default><default>
[twi3_para]
twi_used = 0
twi_scl = port:PB05<4><default><default><default>
twi_sda = port:PB06<4><default><default><default>
;----------------------------------------------------------------------------------
;uart configuration
;uart_type --- 2 (2 wire), 4 (4 wire), 8 (8 wire, full function)
;----------------------------------------------------------------------------------
[uart_para0]
uart_used = 1
uart_port = 0
uart_type = 2
uart_tx = port:PH20<2><1><default><default>
uart_rx = port:PH21<2><1><default><default>
[uart_para1]
uart_used = 0
uart_port = 1
uart_type = 8
uart_tx = port:PA04<4><1><default><default>
uart_rx = port:PA05<4><1><default><default>
uart_rts = port:PA06<4><1><default><default>
uart_cts = port:PA07<4><1><default><default>
;uart_dtr = port:PA00<4><1><default><default>
;uart_dsr = port:PA01<4><1><default><default>
;uart_dcd = port:PA02<4><1><default><default>
;uart_ring = port:PA03<4><1><default><default>
[uart_para2]
uart_used = 1
uart_port = 2
uart_type = 4
uart_tx = port:PG06<2><1><default><default>
uart_rx = port:PG07<2><1><default><default>
uart_rts = port:PG08<2><1><default><default>
uart_cts = port:PG09<2><1><default><default>
[uart_para3]
uart_used = 0
uart_port = 3
uart_type = 4
uart_tx = port:PB05<3><1><default><default>
uart_rx = port:PB06<3><1><default><default>
uart_rts = port:PB04<3><1><default><default>
uart_cts = port:PB00<3><1><default><default>
[uart_para4]
uart_used = 0
uart_port = 4
uart_type = 2
uart_tx = port:PG17<2><1><default><default>
uart_rx = port:PG18<2><1><default><default>
uart_rts = port:PB04<3><1><default><default>
uart_cts = port:PB00<3><1><default><default>
[uart_para5]
uart_used = 0
uart_port = 5
uart_type = 4
uart_tx = port:PE04<3><1><default><default>
uart_rx = port:PE05<3><1><default><default>
uart_rts = port:PE06<3><1><default><default>
uart_cts = port:PE07<3><1><default><default>
;----------------------------------------------------------------------------------
;spi configuration
;----------------------------------------------------------------------------------
[spi0_para]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 = port:PC27<3><1><default><default>
spi_sclk = port:PC02<3><default><default><default>
spi_mosi = port:PC00<3><default><default><default>
spi_miso = port:PC01<3><default><default><default>
[spi1_para]
spi_used = 0
spi_cs_bitmap = 1
spi_cs1 = port:PG12<2><1><default><default>
spi_cs0 = port:PG13<2><1><default><default>
spi_sclk = port:PG14<2><default><default><default>
spi_mosi = port:PG15<2><default><default><default>
spi_miso = port:PG16<2><default><default><default>
[spi2_para]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 = port:PH09<2><default><default><default>
spi_sclk = port:PH10<2><default><default><default>
spi_mosi = port:PH11<2><default><default><default>
spi_miso = port:PH12<2><default><default><default>
[spi3_para]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 = port:PA21<4><default><default><default>
spi_sclk = port:PA22<4><default><default><default>
spi_mosi = port:PA23<4><default><default><default>
spi_miso = port:PA24<4><default><default><default>
spi_cs1 = port:PA25<4><default><default><default>
;----------------------------------------------------------------------------------
;resistance tp configuration
;----------------------------------------------------------------------------------
[rtp_para]
rtp_used = 0
rtp_screen_size = 5
rtp_regidity_level = 5
rtp_press_threshold_enable = 0
rtp_press_threshold = 0x1f40
rtp_sensitive_level = 0xf
rtp_exchange_x_y_flag = 0
;----------------------------------------------------------------------------------
;capacitor tp configuration
;external int function
;wakeup output function
;notice --- tp_int_port & tp_io_port use the same port
;----------------------------------------------------------------------------------
[ctp_para]
ctp_used = 0
ctp_twi_id = 1
ctp_twi_addr = 0x5d
ctp_screen_max_x = 1280
ctp_screen_max_y = 800
ctp_revert_x_flag = 1
ctp_revert_y_flag = 1
ctp_exchange_x_y_flag = 1
ctp_int_port = port:PA03<6><default><default><default>
ctp_wakeup = port:PA02<1><default><default><1>
;----------------------------------------------------------------------------------
;touch key configuration
;----------------------------------------------------------------------------------
[tkey_para]
tkey_used = 0
tkey_twi_id =
tkey_twi_addr =
tkey_int =
;----------------------------------------------------------------------------------
;motor configuration
;----------------------------------------------------------------------------------
[motor_para]
motor_used = 0
motor_shake = port:power3<1><default><default><1>
[nand0_para]
nand_support_2ch = 1
nand0_used = 1
nand0_we = port:PC00<2><default><default><default>
nand0_ale = port:PC01<2><default><default><default>
nand0_cle = port:PC02<2><default><default><default>
nand0_ce1 = port:PC03<2><default><default><default>
nand0_ce0 = port:PC04<2><default><default><default>
nand0_nre = port:PC05<2><default><default><default>
nand0_rb0 = port:PC06<2><default><default><default>
nand0_rb1 = port:PC07<2><default><default><default>
nand0_d0 = port:PC08<2><default><default><default>
nand0_d1 = port:PC09<2><default><default><default>
nand0_d2 = port:PC10<2><default><default><default>
nand0_d3 = port:PC11<2><default><default><default>
nand0_d4 = port:PC12<2><default><default><default>
nand0_d5 = port:PC13<2><default><default><default>
nand0_d6 = port:PC14<2><default><default><default>
nand0_d7 = port:PC15<2><default><default><default>
nand0_ce2 = port:PC25<2><default><default><default>
nand0_ce3 = port:PC26<2><default><default><default>
nand0_ndqs = port:PC24<2><default><default><default>
[nand1_para]
nand1_used = 1
nand1_we = port:PH00<2><default><default><default>
nand1_ale = port:PH01<2><default><default><default>
nand1_cle = port:PH02<2><default><default><default>
nand1_ce1 = port:PH03<2><default><default><default>
nand1_ce0 = port:PH04<2><default><default><default>
nand1_nre = port:PH05<2><default><default><default>
nand1_rb0 = port:PH06<2><default><default><default>
nand1_rb1 = port:PH07<2><default><default><default>
nand1_d0 = port:PC16<3><default><default><default>
nand1_d1 = port:PC17<3><default><default><default>
nand1_d2 = port:PC18<3><default><default><default>
nand1_d3 = port:PC19<3><default><default><default>
nand1_d4 = port:PC20<3><default><default><default>
nand1_d5 = port:PC21<3><default><default><default>
nand1_d6 = port:PC22<3><default><default><default>
nand1_d7 = port:PC23<3><default><default><default>
nand1_ce2 = port:PH29<2><default><default><default>
nand1_ce3 = port:PH30<2><default><default><default>
nand1_ndqs = port:PH08<2><default><default><default>
;----------------------------------------------------------------------------------
;disp init configuration
;
;disp_mode (0:screen0<screen0,fb0>)
;screenx_output_type (0:none; 1:lcd; 3:hdmi;)
;screenx_output_mode (used for hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50)
; (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60)
;fbx format (4:RGB655 5:RGB565 6:RGB556 7:ARGB1555 8:RGBA5551 9:RGB888 10:ARGB8888 12:ARGB4444)
;fbx pixel sequence (0:ARGB 1:BGRA 2:ABGR 3:RGBA)
;fbx_width,fbx_height (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
;lcdx_backlight (lcd init backlight,the range:[0,256],default:197
;lcdx_yy (lcd init screen bright/contrast/saturation/hue, value:0~100, default:50/50/57/50)
;----------------------------------------------------------------------------------
[disp_init]
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 3
screen0_output_mode = 5
screen1_output_type = 1
screen1_output_mode = 4
fb0_format = 10
fb0_pixel_sequence = 0
fb0_scaler_mode_enable = 1
fb0_width = 0
fb0_height = 0
fb1_format = 10
fb1_pixel_sequence = 0
fb1_scaler_mode_enable = 0
fb1_width = 0
fb1_height = 0
lcd0_backlight = 50
lcd1_backlight = 50
lcd0_bright = 50
lcd0_contrast = 50
lcd0_saturation = 57
lcd0_hue = 50
lcd1_bright = 50
lcd1_contrast = 50
lcd1_saturation = 57
lcd1_hue = 50
;----------------------------------------------------------------------------------
;lcd0 configuration
;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp
;lcd_x: lcd horizontal resolution
;lcd_y: lcd vertical resolution
;lcd_width: width of lcd in mm
;lcd_height: height of lcd in mm
;lcd_dclk_freq: in MHZ unit
;lcd_pwm_freq: in HZ unit
;lcd_pwm_pol: lcd backlight PWM polarity
;lcd_pwm_max_limit lcd backlight PWM max limit(<=255)
;lcd_hbp: hsync back porch
;lcd_ht: hsync total cycle
;lcd_vbp: vsync back porch
;lcd_vt: vysnc total cycle
;lcd_hspw: hsync plus width
;lcd_vspw: vysnc plus width
;lcd_lvds_if: 0:single link; 1:dual link
;lcd_lvds_colordepth: 0:8bit; 1:6bit
;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode
;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
;lcd_gamma_en lcd gamma correction enable
;lcd_bright_curve_en lcd bright curve correction enable
;lcd_cmap_en lcd color map function enable
;deu_mode 0:smoll lcd screen; 1:large lcd screen(larger than 10inch)
;lcdgamma4iep: Smart Backlight parameter, lcd gamma vale * 10;
; decrease it while lcd is not bright enough; increase while lcd is too bright
;smart_color 90:normal lcd screen 65:retina lcd screen(9.7inch)
;----------------------------------------------------------------------------------
[lcd0_para]
lcd_used = 0
lcd_if = 3
lcd_x = 1280
lcd_y = 800
lcd_width = 150
lcd_height = 94
lcd_dclk_freq = 70
lcd_pwm_freq = 50000
lcd_pwm_pol = 0
lcd_hbp = 20
lcd_ht = 1418
lcd_hspw = 10
lcd_vbp = 10
lcd_vt = 814
lcd_vspw = 5
lcd_lvds_if = 0
lcd_lvds_colordepth = 1
lcd_lvds_mode = 0
lcd_frm = 1
lcd_gamma_en = 0
lcd_bright_curve_en = 0
lcd_cmap_en = 0
deu_mode = 0
lcdgamma4iep = 22
smart_color = 90
lcd_bl_en = port:PA25<1><0><default><1>
lcd_power = port:power2<1><0><default><1>
lcd_pwm = port:PH13<2><0><default><default>
lcdd0 = port:PD00<3><0><default><default>
lcdd1 = port:PD01<3><0><default><default>
lcdd2 = port:PD02<3><0><default><default>
lcdd3 = port:PD03<3><0><default><default>
lcdd4 = port:PD04<3><0><default><default>
lcdd5 = port:PD05<3><0><default><default>
lcdd6 = port:PD06<3><0><default><default>
lcdd7 = port:PD07<3><0><default><default>
;----------------------------------------------------------------------------------
;hdmi configuration
;----------------------------------------------------------------------------------
[hdmi_para]
hdmi_used = 1
;--------------------------------------------------------------------------------
;vip (video input port) configuration
;vip_used: 0:disable 1:enable
;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one buffer
;vip_dev_qty: The quantity of devices linked to capture bus
;vip_dev(x)_isp_used 0:not use isp 1:use isp
;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb
;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby
;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable
;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable
;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply
;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply
;vip_dev(x)_avdd: camera module analog power handle string, pmu power supply
;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply
;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply
;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply
;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply
;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply
;x indicates the index of the devices which are linked to the same capture bus
;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000
;fill handle string as below:
;axp22_eldo3
;axp22_dldo4
;axp22_eldo2
;fill handle string "" when not using any pmu power supply
;--------------------------------------------------------------------------------
[vip0_para]
vip_used = 0
vip_mode = 0
vip_dev_qty = 1
vip_vip_mck = port:PE16<2><default><default><default>
vip_dev0_mname = "ov8825"
vip_dev0_lane = 2
vip_dev0_twi_id = 0
vip_dev0_twi_addr = 0x6c
vip_dev0_isp_used = 1
vip_dev0_fmt = 1
vip_dev0_stby_mode = 0
vip_dev0_vflip = 0
vip_dev0_hflip = 0
vip_dev0_iovdd = "axp22_eldo3"
vip_dev0_iovdd_vol = 2800000
vip_dev0_avdd = "axp22_dldo4"
vip_dev0_avdd_vol = 2800000
vip_dev0_dvdd = "axp22_eldo2"
vip_dev0_dvdd_vol = 1500000
vip_dev0_afvdd = ""
vip_dev0_afvdd_vol = 2800000
vip_dev0_power_en = port:PH25<1><default><default><0>
vip_dev0_reset = port:PH23<1><default><default><0>
vip_dev0_pwdn = port:PH24<1><default><default><1>
vip_dev0_flash_en = port:PA26<1><default><default><0>
vip_dev0_flash_mode = port:PA27<1><default><default><0>
vip_dev0_af_pwdn = port:PA24<1><default><default><0>
vip_dev0_act_used = 1
vip_dev0_act_name = "ad5820_act"
vip_dev0_act_slave = 0x18
vip_dev1_mname = ""
vip_dev1_lane = 1
vip_dev1_twi_id = 0
vip_dev1_twi_addr =
vip_dev1_isp_used = 0
vip_dev1_fmt = 1
vip_dev1_stby_mode = 0
vip_dev1_vflip = 0
vip_dev1_hflip = 0
vip_dev1_iovdd = "axp22_eldo3"
vip_dev1_iovdd_vol = 2800000
vip_dev1_avdd = "axp22_dldo4"
vip_dev1_avdd_vol = 2800000
vip_dev1_dvdd = "axp22_eldo2"
vip_dev1_dvdd_vol = 1500000
vip_dev1_afvdd = ""
vip_dev1_afvdd_vol = 2800000
vip_dev1_power_en =
vip_dev1_reset =
vip_dev1_pwdn =
vip_dev1_flash_en =
vip_dev1_flash_mode =
vip_dev1_af_pwdn =
[vip1_para]
vip_used = 0
vip_mode = 0
vip_dev_qty = 1
vip_csi_pck = port:PE00<2><default><default><default>
vip_csi_mck = port:PE01<2><default><default><default>
vip_csi_hsync = port:PE02<2><default><default><default>
vip_csi_vsync = port:PE03<2><default><default><default>
vip_csi_d0 = port:PE04<2><default><default><default>
vip_csi_d1 = port:PE05<2><default><default><default>
vip_csi_d2 = port:PE06<2><default><default><default>
vip_csi_d3 = port:PE07<2><default><default><default>
vip_csi_d4 = port:PE08<2><default><default><default>
vip_csi_d5 = port:PE09<2><default><default><default>
vip_csi_d6 = port:PE10<2><default><default><default>
vip_csi_d7 = port:PE11<2><default><default><default>
vip_csi_d8 = port:PE12<2><default><default><default>
vip_csi_d9 = port:PE13<2><default><default><default>
vip_csi_d10 = port:PE14<2><default><default><default>
vip_csi_d11 = port:PE15<2><default><default><default>
vip_dev0_mname = "ov5647"
vip_dev0_twi_id = 0
vip_dev0_twi_addr = 0x6c
vip_dev0_isp_used = 0
vip_dev0_fmt = 0
vip_dev0_stby_mode = 0
vip_dev0_vflip = 0
vip_dev0_hflip = 0
vip_dev0_iovdd = "axp22_eldo3"
vip_dev0_iovdd_vol = 2800000
vip_dev0_avdd = "axp22_eldo3"
vip_dev0_avdd_vol = 2800000
vip_dev0_dvdd = "axp22_dldo4"
vip_dev0_dvdd_vol = 1500000
vip_dev0_afvdd = "axp22_eldo2"
vip_dev0_afvdd_vol = 2800000
vip_dev0_power_en = port:PA23<1><default><default><0>
vip_dev0_reset = port:PA21<1><default><default><0>
vip_dev0_pwdn = port:PA22<1><default><default><1>
vip_dev0_flash_en =
vip_dev0_flash_mode =
vip_dev0_af_pwdn =
vip_dev0_act_used = 1
vip_dev0_act_name = "ad5820_act"
vip_dev0_act_slave = 0x18
vip_dev1_mname = ""
vip_dev1_twi_id = 0
vip_dev1_twi_addr =
vip_dev1_stby_mode = 0
vip_dev1_isp_used = 0
vip_dev1_fmt = 1
vip_dev1_vflip = 0
vip_dev1_hflip = 0
vip_dev1_iovdd = "axp22_eldo3"
vip_dev1_iovdd_vol = 2800000
vip_dev1_avdd = "axp22_dldo4"
vip_dev1_avdd_vol = 2800000
vip_dev1_dvdd = "axp22_eldo2"
vip_dev1_dvdd_vol = 1500000
vip_dev1_afvdd = ""
vip_dev1_afvdd_vol = 2800000
vip_dev1_power_en =
vip_dev1_reset =
vip_dev1_pwdn =
vip_dev1_flash_en =
vip_dev1_flash_mode =
vip_dev1_af_pwdn =
[camera_list_para]
camera_list_para_used = 0
ov7670 = 0
gc0308 = 1
gt2005 = 0
hi704 = 0
sp0838 = 0
mt9m112 = 0
mt9m113 = 0
gc2035 = 1
ov2655 = 0
hi253 = 0
gc0307 = 1
mt9d112 = 0
ov5640 = 1
ov5647 = 1
gc2015 = 0
ov2643 = 0
gc0329 = 0
gc0309 = 0
tvp5150 = 0
s5k4ec = 0
ov5650_mv9335 = 0
siv121d = 0
;--------------------------------------------------------------------------------
;tv configuration
;
;--------------------------------------------------------------------------------
[tvout_para]
tvout_used =
tvout_channel_num =
tv_en =
[tvin_para]
tvin_used =
tvin_channel_num =
;--------------------------------------------------------------------------------
; SDMMC PINS MAPPING |
; ------------------------------------------------------------------------------|
; Config Guide |
; sdc_used: 1-enable card, 0-disable card |
; sdc_detmode: card detect mode |
; 1-detect card by gpio polling |
; 2-detect card by gpio irq(must use IO with irq function) |
; 3-no detect, always in for boot card |
; 4-manually insert and remove by /proc/driver/sunxi-mmc.x/insert|
; sdc_buswidth: card bus width, 1-1bit, 4-4bit, 8-8bit |
; sdc_use_wp: 1-with write protect IO, 0-no write protect IO |
; sdc_isio: for sdio card |
; sdc_regulator: power control.if card supports UHS-I/DDR and HS200 timing for|
; SD3.0 or eMMC4.5, regulator must be configured. the value is |
; the ldo name of AXP221, eg: sdc_regulator = "axp22_eldo2" |
; other: GPIO Mapping configuration |
; ------------------------------------------------------------------------------|
; Note: |
; 1 if detmode=2, sdc_det's config=6 |
; else if detmode=1, sdc_det's config=0 |
; else sdc_det IO is not necessary |
; 2 if the customer wants to support UHS-I and HS200 features, he must provide|
; an independent power supply for the card. This is only used in platforms |
; that supports SD3.0 cards and eMMC4.4+ flashes |
;--------------------------------------------------------------------------------
[mmc0_para]
sdc_used = 1
sdc_detmode = 1
sdc_buswidth = 4
sdc_clk = port:PF02<2><1><2><default>
sdc_cmd = port:PF03<2><1><2><default>
sdc_d0 = port:PF01<2><1><2><default>
sdc_d1 = port:PF00<2><1><2><default>
sdc_d2 = port:PF05<2><1><2><default>
sdc_d3 = port:PF04<2><1><2><default>
sdc_det = port:PH22<0><1><default><default>
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"
[mmc1_para]
sdc_used = 0
sdc_detmode = 4
sdc_buswidth = 4
sdc_clk = port:PG00<2><1><2><default>
sdc_cmd = port:PG01<2><1><2><default>
sdc_d0 = port:PG02<2><1><2><default>
sdc_d1 = port:PG03<2><1><2><default>
sdc_d2 = port:PG04<2><1><2><default>
sdc_d3 = port:PG05<2><1><2><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 1
sdc_regulator = "none"
[mmc2_para]
sdc_used = 0
sdc_detmode = 3
sdc_buswidth = 8
sdc_clk = port:PC07<3><1><2><default>
sdc_cmd = port:PC06<3><1><2><default>
sdc_d0 = port:PC08<3><1><2><default>
sdc_d1 = port:PC09<3><1><2><default>
sdc_d2 = port:PC10<3><1><2><default>
sdc_d3 = port:PC11<3><1><2><default>
sdc_d4 = port:PC12<3><1><2><default>
sdc_d5 = port:PC13<3><1><2><default>
sdc_d6 = port:PC14<3><1><2><default>
sdc_d7 = port:PC15<3><1><2><default>
emmc_rst = port:PC24<3><1><2><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"
[mmc3_para]
sdc_used = 0
sdc_detmode = 2
sdc_buswidth = 4
sdc_clk = port:PA10<2><1><2><default>
sdc_cmd = port:PA09<2><1><2><default>
sdc_d0 = port:PA11<2><1><2><default>
sdc_d1 = port:PA12<2><1><2><default>
sdc_d2 = port:PA13<2><1><2><default>
sdc_d3 = port:PA14<2><1><2><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"
; ------------------------------------------------------------------------------|
; sim card configuration
;--------------------------------------------------------------------------------
[smc_para]
smc_used =
smc_rst =
smc_vppen =
smc_vppp =
smc_det =
smc_vccen =
smc_sck =
smc_sda =
;--------------------------------
;[usbc0]：控制器0的配置。
;usb_used：USB使能标志。置1，表示系统中USB模块可用,置0,则表示系统USB禁用。
;usb_port_type：USB端口的使用情况。 0：device only;1：host only;2：OTG
;usb_detect_type：USB端口的检查方式。0：不做检测;1：vbus/id检查;2：id/dpdm检查
;usb_id_gpio：USB ID pin脚配置。具体请参考gpio配置说明。
;usb_det_vbus_gpio：USB DET_VBUS pin脚配置。具体请参考gpio配置说明。
;usb_drv_vbus_gpio：USB DRY_VBUS pin脚配置。具体请参考gpio配置说明。
;usb_det_vbus_gpio: "axp_ctrl",表示axp 提供
;usb_restrict_gpio usb限流控制pin
;usb_restric_flag: usb限流标置
;usb_not_suspend: usb远程唤醒标置，0：不支持，1：支持
;--------------------------------
;--------------------------------
;--- USB0控制标志
;--------------------------------
[usbc0]
usb_used = 1
usb_port_type = 2
usb_detect_type = 1
usb_id_gpio = port:PH23<0><1><default><default>
usb_det_vbus_gpio = port:PA10<0><0><default><default>
usb_drv_vbus_gpio =
usb_restrict_gpio = port:PH26<1><0><default><0>
usb_host_init_state = 0
usb_restric_flag = 0
usb_restric_voltage = 3550000
usb_restric_capacity= 5
;--------------------------------
;--- USB1控制标志
;--------------------------------
[usbc1]
usb_used = 1
usb_port_type = 1
usb_detect_type = 0
usb_id_gpio =
usb_det_vbus_gpio =
usb_drv_vbus_gpio = port:PC27<1><0><default><0>
usb_restrict_gpio = port:PH26<1><0><default><0>
usb_host_init_state = 1
usb_restric_flag = 0
usb_not_suspend = 0
;--------------------------------
;--- USB2控制标志
;--------------------------------
[usbc2]
usb_used = 1
usb_port_type = 1
usb_detect_type = 0
usb_id_gpio =
usb_det_vbus_gpio =
usb_drv_vbus_gpio =
usb_restrict_gpio =
usb_host_init_state = 0
usb_restric_flag = 0
usb_not_suspend = 0
;--------------------------------
;--- USB Device
;--------------------------------
[usb_feature]
vendor_id = 0x18D1
mass_storage_id = 0x0001
adb_id = 0x0002
manufacturer_name = "USB Developer"
product_name = "Android"
serial_number = "20080411"
[msc_feature]
vendor_name = "USB 2.0"
product_name = "USB Flash Driver"
release = 100
luns = 3
;--------------------------------------------------------------------------------
; G sensor configuration
; gs_twi_id --- TWI ID for controlling Gsensor (0: TWI0, 1: TWI1, 2: TWI2)
;--------------------------------------------------------------------------------
[gsensor_para]
gsensor_used = 0
gsensor_twi_id = 2
gsensor_twi_addr = 0x18
gsensor_int1 = port:PA09<6><1><default><default>
gsensor_int2 =
;--------------------------------------------------------------------------------
; gps gpio configuration
; gps_spi_id --- the index of SPI controller. 0: SPI0, 1: SPI1, 2: SPI2, 15: no SPI used
; gps_spi_cs_num --- the chip select number of SPI controller. 0: SPI CS0, 1: SPI CS1
; gps_lradc --- the lradc number for GPS used. 0 and 1 is valid, set 2 if not use lradc
;--------------------------------------------------------------------------------
[gps_para]
;--------------------------------------------------------------------------------
;wifi configuration
;wifi_sdc_id --- 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3
;wifi_usbc_id --- 0- USB0, 1- USB1, 2- USB2
;wifi_usbc_type -- 1- EHCI(speed 2.0), 2- OHCI(speed 1.0)
;wifi_mod_sel --- 0- none, 1- ap6181, 2- ap6210(wifi+bt),
; 3 - rtl8723as(wifi+bt), 4- rtl8189es(SM89E00),
; 5 - rtl8192cu, 6 - rtl8188eu, 7 - mt6620,
; 8 - rtl8723au, 9 - ap6330(wifi+bt+fm)
;--------------------------------------------------------------------------------
[wifi_para]
wifi_used = 1
wifi_sdc_id = 1
wifi_usbc_id = 2
wifi_usbc_type = 1
wifi_mod_sel = 6
wifi_power = "axp22_aldo1"
; 1 - ap6181 sdio wifi gpio config
;ap6xxx_wl_regon = port:PM00<1><default><default><0>
;ap6xxx_wl_host_wake = port:PM01<0><default><default><0>
; 2 - ap6210 sdio wifi gpio config
;ap6xxx_wl_regon = port:PM00<1><default><default><0>
;ap6xxx_wl_host_wake = port:PM01<0><default><default><0>
;ap6xxx_bt_regon = port:PM03<1><default><default><0>
;ap6xxx_bt_wake = port:PG12<1><default><default><0>
;ap6xxx_bt_host_wake = port:PM04<0><default><default><0>
; 3 - rtl8723as sdio wifi + bt gpio config
rtk_rtl8723as_wl_dis = port:PG10<1><default><default><0>
rtk_rtl8723as_bt_dis = port:PG11<1><default><default><0>
rtk_rtl8723as_wl_host_wake = port:PG12<0><default><default><0>
rtk_rtl8723as_bt_host_wake = port:PG17<0><default><default><0>
; 4 - rtl8189es sdio wifi gpio config
;rtl8189es_shdn = port:PG10<1><default><default><0>
;rtl8189es_wakeup = port:PG12<1><default><default><1>
; 5 - rtl8192cu usb wifi
; 6 - rtl8188eu usb wifi
; 7 - mt6620 sdio+uart wifi+bt+gps+fm gpio config
;mtk_6620_ldo = port:PL04<1><default><default><0>
;mtk_6620_pmu_en = port:PL05<1><default><default><0>
;mtk_6620_sys_rst = port:PL08<1><default><default><0>
;mtk_6620_wifi_int = port:PL06<6><1><default><default>
;mtk_6620_bgf_int = port:PL07<6><1><default><default>
; 8 - rtl8723au usb wifi + bt
; 9 - ap6330 sdio wifi gpio config
;ap6xxx_wl_regon = port:PM00<1><default><default><0>
;ap6xxx_wl_host_wake = port:PM01<0><default><default><0>
;ap6xxx_bt_regon = port:PM03<1><default><default><0>
;ap6xxx_bt_wake = port:PG12<1><default><default><0>
;ap6xxx_bt_host_wake = port:PM04<0><default><default><0>
;--------------------------------------------------------------------------------
;3G configuration
;--------------------------------------------------------------------------------
[3g_para]
3g_used = 0
3g_usbc_num = 2
3g_uart_num = 0
bb_vbat = port:PL03<1><default><default><0>
bb_host_wake = port:PM00<1><default><default><0>
bb_on = port:PM01<1><default><default><0>
bb_pwr_on = port:PM03<1><default><default><0>
bb_wake = port:PM04<1><default><default><0>
bb_rf_dis = port:PM05<1><default><default><0>
bb_rst = port:PM06<1><default><default><0>
3g_int =
;--------------------------------------------------------------------------------
;gyroscope
;--------------------------------------------------------------------------------
[gy_para]
gy_used = 1
gy_twi_id = 2
gy_twi_addr = 0x6a
gy_int1 = port:PA10<6><1><default><default>
gy_int2 =
;--------------------------------------------------------------------------------
;light sensor
;--------------------------------------------------------------------------------
[ls_para]
ls_used = 1
ls_twi_id = 2
ls_twi_addr = 0x23
ls_int = port:PA12<6><1><default><default>
;--------------------------------------------------------------------------------
;compass
;--------------------------------------------------------------------------------
[compass_para]
compass_used = 1
compass_twi_id = 2
compass_twi_addr = 0x0d
compass_int = port:PA11<6><1><default><default>
;--------------------------------------------------------------------------------
;blue tooth
;bt_used ---- blue tooth used (0- no used, 1- used)
;bt_uard_id ---- uart index
;--------------------------------------------------------------------------------
[bt_para]
bt_used = 1
bt_uart_id =
bt_wakeup =
bt_gpio =
bt_rst =
;--------------------------------------------------------------------------------
;i2s_master:1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master) use
; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master) not use
; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame slave) not use
; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave) use
;i2s_select:0 is pcm.1 is i2s
;audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format). use
; 2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
; 3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
; 4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd BCLK rising edge after LRC rising edge). use
; 5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd BCLK rising edge after LRC rising edge)
;signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame) use
; 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
; 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM) use
; 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
;over_sample_rate: support 128fs/192fs/256fs/384fs/512fs/768fs
;sample_resolution :16bits/20bits/24bits
;word_select_size :16bits/20bits/24bits/32bits
;pcm_sync_period :16/32/64/128/256
;msb_lsb_first :0: msb first; 1: lsb first
;sign_extend :0: zero pending; 1: sign extend
;slot_index :slot index: 0: the 1st slot - 3: the 4th slot
;slot_width :8 bit width / 16 bit width
;frame_width :0: long frame = 2 clock width; 1: short frame
;tx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;rx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;--------------------------------------------------------------------------------
[i2s_para]
i2s_used = 1
i2s_channel = 2
i2s_master = 1
i2s_select = 0
audio_format = 4
signal_inversion = 3
over_sample_rate = 256
sample_resolution = 16
word_select_size = 32
pcm_sync_period = 256
msb_lsb_first = 0
sign_extend = 0
slot_index = 0
slot_width = 16
frame_width = 1
tx_data_mode = 0
rx_data_mode = 0
i2s_mclk =
i2s_bclk = port:PB01<2><1><default><default>
i2s_lrclk = port:PB02<2><1><default><default>
i2s_dout0 = port:PB03<2><1><default><default>
i2s_dout1 =
i2s_dout2 =
i2s_dout3 =
i2s_din = port:PB07<2><1><default><default>
;--------------------------------------------------------------------------------
;pcm_master:1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master) use
; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master) not use
; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame slave) not use
; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave) use
;pcm_select:1 is pcm.0 is i2s
;audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format). use
; 2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
; 3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
; 4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd BCLK rising edge after LRC rising edge). use
; 5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd BCLK rising edge after LRC rising edge)
;signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame) use
; 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
; 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM) use
; 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
;over_sample_rate: support 128fs/192fs/256fs/384fs/512fs/768fs
;sample_resolution :16bits/20bits/24bits
;word_select_size :16bits/20bits/24bits/32bits
;pcm_sync_period :16/32/64/128/256
;msb_lsb_first :0: msb first; 1: lsb first
;sign_extend :0: zero pending; 1: sign extend
;slot_index :slot index: 0: the 1st slot - 3: the 4th slot
;slot_width :8 bit width / 16 bit width
;frame_width :0: long frame = 2 clock width; 1: short frame
;tx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;rx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;--------------------------------------------------------------------------------
[pcm_para]
pcm_used = 1
pcm_channel = 2
pcm_master = 4
pcm_select = 1
audio_format = 4
signal_inversion = 3
over_sample_rate = 512
sample_resolution = 16
word_select_size = 32
pcm_sync_period = 64
msb_lsb_first = 0
sign_extend = 0
slot_index = 0
slot_width = 16
frame_width = 1
tx_data_mode = 0
rx_data_mode = 0
pcm_mclk =
pcm_bclk = port:PG13<3><1><default><default>
pcm_lrclk = port:PG14<3><1><default><default>
pcm_dout = port:PG16<3><1><default><default>
pcm_din = port:PG15<3><1><default><default>
[spdif_para]
spdif_used = 1
spdif_dout = port:PH28<3><1><default><default>
spdif_din = port:PH27<3><1><default><default>
;--------------------------------------------------------------------------------
;pa_single_vol,pa_double_vol: 31 level,1.5db/step.0x1f is the large volume.
;cap_vol:use for system record,0x0--0db,0x1--24db,0x2--27db,0x3--30db,0x4--33db,0x5--36db,0x6--39db,0x7--42db
;headphone_vol,earpiece_vol: must least than 0x3b. 0x1 is a step.
;headset_mic_vol: headset mic(mic2) vol,use for phone headset mic call
;main_mic_vol: main mic(mic1) vol,use for phone main mic call
;--------------------------------------------------------------------------------
[audio_para]
audio_used = 1
audio_hp_ldo = "none"
headphone_vol = 0x3b
earpiece_vol = 0x3b
cap_vol = 0x5
pa_single_vol = 0x19
pa_double_used = 0
pa_double_vol = 0x1f
headphone_direct_used = 0
headphone_mute_used = 0
audio_pa_ctrl = port:PL02<1><default><default><0>
audio_mute_ctrl =
headset_mic_vol = 6
main_mic_vol = 6
;----------------------------------------------------------------------------------
;ir --- infra remote configuration
;----------------------------------------------------------------------------------
[ir_para]
ir_used = 1
ir_rx = port:PL04<2><1><default><default>
ir_power_key_code =
[axp_para]
axp_num = 1
axp_0 = "axp22_dldo4"
;axp_1 = "axp22_dldo1"
;----------------------------------------------------------------------------------
;gpio configuration
;----------------------------------------------------------------------------------
[gpio_para]
gpio_used = 1
gpio_pin_1 = port:PH13<1><default><default><1>
gpio_pin_2 = port:PH24<1><default><2><1>
;-------------------------------------------------------------------------------------
;pmu_used ---0:not used,1:used
;pmu_twi_addr ---slave address
;pmu_twi_id ---i2c bus number (0 TWI0, 1 TWI2, 2 TWI3)
;pmu_irq_id ---irq number (0 irq0,1 irq1,……)
;pmu_battery_rdc ---battery initial resistance
;pmu_battery_cap ---battery capability,mAh
;pmu_batdeten ---battery detect en;0:disable 1:enable
;pmu_runtime_chgcur ---set initial charging current limite,mA，300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_earlysuspend_chgcur ---set earlysuspend charging current limite,mA，300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_suspend_chgcur ---set suspend charging current limite,mA，300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_shutdown_chgcur ---set shutdown charging current limite,mA，300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_init_chgvol ---set initial charing target voltage,mV,4100/4220/4200/4240
;pmu_init_chgend_rate ---set initial charing end current rate,10/15
;pmu_init_chg_enabled ---set initial charing enabled,0:disable,1:enable
;pmu_init_adc_freq ---set initial adc frequency,Hz,100/200/400/800
;pmu_init_adcts_freq ---set initial adc TS,Hz,100/200/400/800
;pmu_init_chg_pretime ---set initial pre-charging time,min,40/50/60/70
;pmu_init_chg_csttime ---set initial constance-charging time,min,360/480/600/720
;pmu_batt_cap_correct ---correct the battery capacity or not when one charge cycle 0:not correct 1:correct
;pmu_bat_regu_en ---bat regulator is enable or not when charge done 0:disable 1:enable
;pmu_bat_para1 ---battery indication at 3.13V
;pmu_bat_para2 ---battery indication at 3.27V
;pmu_bat_para3 ---battery indication at 3.34V
;pmu_bat_para4 ---battery indication at 3.41V
;pmu_bat_para5 ---battery indication at 3.48V
;pmu_bat_para6 ---battery indication at 3.52V
;pmu_bat_para7 ---battery indication at 3.55V
;pmu_bat_para8 ---battery indication at 3.57V
;pmu_bat_para9 ---battery indication at 3.59V
;pmu_bat_para10 ---battery indication at 3.61V
;pmu_bat_para11 ---battery indication at 3.63V
;pmu_bat_para12 ---battery indication at 3.64V
;pmu_bat_para13 ---battery indication at 3.66V
;pmu_bat_para14 ---battery indication at 3.7V
;pmu_bat_para15 ---battery indication at 3.73V
;pmu_bat_para16 ---battery indication at 3.77V
;pmu_bat_para17 ---battery indication at 3.78V
;pmu_bat_para18 ---battery indication at 3.8V
;pmu_bat_para19 ---battery indication at 3.82V
;pmu_bat_para20 ---battery indication at 3.84V
;pmu_bat_para21 ---battery indication at 3.85V
;pmu_bat_para22 ---battery indication at 3.87V
;pmu_bat_para23 ---battery indication at 3.91V
;pmu_bat_para24 ---battery indication at 3.94V
;pmu_bat_para25 ---battery indication at 3.98V
;pmu_bat_para26 ---battery indication at 4.01V
;pmu_bat_para27 ---battery indication at 4.05V
;pmu_bat_para28 ---battery indication at 4.08V
;pmu_bat_para29 ---battery indication at 4.1V
;pmu_bat_para30 ---battery indication at 4.12V
;pmu_bat_para31 ---battery indication at 4.14V
;pmu_bat_para32 ---battery indication at 4.15V
;pmu_usbvol_limit ---set usb-ac limited voltage enable,1:enable，0：disable
;pmu_usbcur_limit ---set usb-ac limited current enable,1:enable，0：disable
;pmu_usbvol ---set usb-ac limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
;pmu_usbcur ---set usb-ac limited current level,mA,500/900, 0 - not limite
;pmu_usbvol_pc ---set usb-pc limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
;pmu_usbcur_pc ---set usb-pc limited current level,mA,500/900, 0 - not limite
;pmu_pwroff_vol ---set protect voltage when system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300
;pmu_pwron_vol ---set protect voltage after system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300
;pmu_pekoff_time ---set pek off time,ms, 4000/6000/8000/10000
;pmu_pekoff_func ---set pek off func, 0:shutdown,1:restart
;pmu_pekoff_en ---set pek offlevel powerdown or not, 0:not powerdown,1:powerdown
;pmu_peklong_time ---set pek pek long irq time,ms,1000/1500/2000/2500
;pmu_pekon_time ---set pek on time,ms,128/1000/2000/3000
;pmu_pwrok_time ---set pmu pwrok delay time,ms,8/16/32/64
;pmu_battery_warning_level1 ---low power warning high level,5%-20%,1%/step
;pmu_battery_warning_level2 ---low power warning low level,0%-15%,1%/step
;pmu_restvol_time ---battery indicaton reflash time,30/60/120/
;pmu_ocv_cou_adjust_time ---ocv battery indication reflash time,60/120/30
;pmu_chgled_func ---CHGKED pin control，0:controlled by pmu,1:controlled by Charger
;pmu_chgled_type ---CHGLED Type select when pmu_chgled_func=0,0:Type A，1：Type B
;pmu_vbusen_func ---N_VBUSEN function select,0:as an output,1:as an input
;pmu_reset ---when power key press longer than 16's,PMU reset or not.0:not reset 1:reset
;pmu_IRQ_wakeup ---press IRQ wakeup or not when sleep or power down.0:not wakeup 1:wakeup
;pmu_hot_shutdowm ---when PMU over temperature protect or not;0:disable 1:enable
;pmu_inshort ---ACIN and VBUS inshort or not by software;0:auto detect 1:inshort
;--------------------------------------------------------------------------------------------------------
[pmu_para]
pmu_used = 1
pmu_twi_addr = 0x34
pmu_twi_id = 1
pmu_irq_id = 0
pmu_battery_rdc = 100
pmu_battery_cap = 0
pmu_batdeten = 1
pmu_runtime_chgcur = 900
pmu_earlysuspend_chgcur = 900
pmu_suspend_chgcur = 1500
pmu_shutdown_chgcur = 1500
pmu_init_chgvol = 4200
pmu_init_chgend_rate = 15
pmu_init_chg_enabled = 1
pmu_init_adc_freq = 800
pmu_init_adcts_freq = 800
pmu_init_chg_pretime = 70
pmu_init_chg_csttime = 720
pmu_batt_cap_correct = 1
pmu_bat_regu_en = 0
pmu_bat_para1 = 0
pmu_bat_para2 = 0
pmu_bat_para3 = 0
pmu_bat_para4 = 0
pmu_bat_para5 = 0
pmu_bat_para6 = 0
pmu_bat_para7 = 0
pmu_bat_para8 = 0
pmu_bat_para9 = 5
pmu_bat_para10 = 8
pmu_bat_para11 = 9
pmu_bat_para12 = 10
pmu_bat_para13 = 13
pmu_bat_para14 = 16
pmu_bat_para15 = 20
pmu_bat_para16 = 33
pmu_bat_para17 = 41
pmu_bat_para18 = 46
pmu_bat_para19 = 50
pmu_bat_para20 = 53
pmu_bat_para21 = 57
pmu_bat_para22 = 61
pmu_bat_para23 = 67
pmu_bat_para24 = 73
pmu_bat_para25 = 78
pmu_bat_para26 = 84
pmu_bat_para27 = 88
pmu_bat_para28 = 92
pmu_bat_para29 = 93
pmu_bat_para30 = 94
pmu_bat_para31 = 95
pmu_bat_para32 = 100
pmu_usbvol_limit = 0
pmu_usbcur_limit = 0
pmu_usbvol = 4000
pmu_usbcur = 0
pmu_usbvol_pc = 4400
pmu_usbcur_pc = 500
pmu_pwroff_vol = 3300
pmu_pwron_vol = 2600
pmu_pekoff_time = 6000
pmu_pekoff_func = 1
pmu_pekoff_en = 1
pmu_peklong_time = 1000
pmu_pekon_time = 128
pmu_pwrok_time = 64
pmu_battery_warning_level1 = 3
pmu_battery_warning_level2 = 0
pmu_restvol_adjust_time = 60
pmu_ocv_cou_adjust_time = 60
pmu_chgled_func = 0
pmu_chgled_type = 0
pmu_vbusen_func = 1
pmu_reset = 0
pmu_IRQ_wakeup = 0
pmu_hot_shutdowm = 1
pmu_inshort = 0
power_start = 1
;----------------------------------------------------------------------------------
; dvfs voltage-frequency table configuration
;
; max_freq: cpu maximum frequency, based on Hz, can not be more than 1008MHz
; min_freq: cpu minimum frequency, based on Hz, can not be less than 96MHz
;
; LV_count: count of LV_freq/LV_volt, must be < 16
;
; LV1: core vdd is 1.26v if cpu frequency is (1104Mhz, xxxxMhz]
; LV2: core vdd is 1.26v if cpu frequency is (1056Mhz, 1104Mhz]
; LV3: core vdd is 1.20v if cpu frequency is (864Mhz, 1056Mhz]
; LV4: core vdd is 1.10v if cpu frequency is (720Mhz, 864Mhz]
; LV5: core vdd is 1.00v if cpu frequency is (480Mhz, 720Mhz]
; LV6: core vdd is 0.90v if cpu frequency is (0Mhz, 480Mhz]
; LV7: core vdd is 0.90v if cpu frequency is (0Mhz, 480Mhz]
; LV8: core vdd is 0.90v if cpu frequency is (0Mhz, 480Mhz]
;
;----------------------------------------------------------------------------------
[dvfs_table]
max_freq = 1008000000
min_freq = 120000000
temp_limit_freq = 1008000000
temp_limit_high = 85
temp_limit_low = 75
LV_count = 8
LV1_freq = 1200000000
LV1_volt = 1500
LV2_freq = 1116000000
LV2_volt = 1400
LV3_freq = 1008000000
LV3_volt = 1260
LV4_freq = 864000000
LV4_volt = 1200
LV5_freq = 720000000
LV5_volt = 1100
LV6_freq = 480000000
LV6_volt = 1000
LV7_freq = 0
LV7_volt = 1000
LV8_freq = 0
LV8_volt = 1000
;----------------------------------------------------------------------------------
; dvfs voltage-frequency table configuration for ic D version
;
; max_freq: cpu maximum frequency, based on Hz, can not be more than 1008MHz
; min_freq: cpu minimum frequency, based on Hz, can not be less than 96MHz
;
; temp_limit_freq: cpu maximum frequency according to tempreture limit
; temp_limit_high: set cpu max freq to temp_limit_freq when tempreture > temp_limit_high
; temp_limit_low: set cpu max freq to max_freq when tempreture < temp_limit_low
; temp_limit_low must be less than temp_limit_high, otherwise invalid
; LV_count: count of LV_freq/LV_volt, must be < 16
; LV1: core vdd is 1.20v if cpu frequency is (1116Mhz, xxxxMhz]
; LV2: core vdd is 1.16v if cpu frequency is (1056Mhz, 1116Mhz]
; LV3: core vdd is 1.10v if cpu frequency is (900Mhz, 1056Mhz]
; LV4: core vdd is 1.06v if cpu frequency is (828Mhz, 900Mhz]
; LV5: core vdd is 1.00v if cpu frequency is (720Mhz, 828Mhz]
; LV6: core vdd is 0.96v if cpu frequency is (600Mhz, 720Mhz]
; LV7: core vdd is 0.90v if cpu frequency is (0Mhz, 480Mhz]
; LV8: core vdd is 0.90v if cpu frequency is (0Mhz, 480Mhz]
;----------------------------------------------------------------------------------
[ver_d_dvfs_table]
max_freq = 1008000000
min_freq = 120000000
temp_limit_freq = 1008000000
temp_limit_high = 85
temp_limit_low = 75
LV_count = 8
LV1_freq = 1200000000
LV1_volt = 1340
LV2_freq = 1008000000
LV2_volt = 1200
LV3_freq = 828000000
LV3_volt = 1100
LV4_freq = 720000000
LV4_volt = 1060
LV5_freq = 480000000
LV5_volt = 1020
LV6_freq = 0
LV6_volt = 1020
LV7_freq = 0
LV7_volt = 1020
LV8_freq = 0
LV8_volt = 1020
;----------------------------------------------------------------------------------
;cpus config parameters
;cpus_uart_debug_used --r_uart whether used for cpus debugging
;
;----------------------------------------------------------------------------------
[cpus_config_paras]
cpus_uart_debug_used = 1
;----------------------------------------------------------------------------------
;boot display configuration
;output_type (0:none; 1:lcd; 2:tv; 3:hdmi; 4:vga)
;output_mode (used for tv/hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50 5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60 11:pal 14:ntsc)
;output_mode (used for vga output, 0:1680*1050 1:1440*900 2:1360*768 3:1280*1024 4:1024*768 5:800*600 6:640*480 10:1920*1080 11:1280*720)
;tv_mode (used for tv output, 0:480i 1:576i 2:480p 3:576p 4:720p50 5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60 11:pal 14:ntsc)
;auto_hpd (auto detect hdmi/cvbs/ypbpr plug in)
;----------------------------------------------------------------------------------
[boot_disp]
output_type = 3
output_mode = 5
auto_hpd = 1
tv_mode = 11
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment