codsane codsane

## HowToOTG.md

      
              1 file
            
          
              86 forks
            
          
              102 comments
            
          
              660 stars
            
          
                gbaman
                / HowToOTG.md
            
            
              Last active
              May 16, 2024 20:10
            
              
                Simple guide for setting up OTG modes on the Raspberry Pi Zero
              
          
    Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).
The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.

Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!

It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.

It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

  
## private_fork.md

      
              1 file
            
          
              479 forks
            
          
              78 comments
            
          
              1773 stars
            
          
                0xjac
                / private_fork.md
            
            
              Last active
              May 16, 2024 12:18
            
              
                Create a private fork of a public repository
              
          
    The repository for the assignment is public and Github does not allow the creation of private forks for public repositories.
The correct way of creating a private frok by duplicating the repo is documented here.
For this assignment the commands are:

Create a bare clone of the repository.
(This is temporary and will be removed so just do it wherever.)


git clone --bare git@github.com:usi-systems/easytrace.git

  
## TorPrivoxyPython.md

      
              1 file
            
          
              37 forks
            
          
              1 comment
            
          
              144 stars
            
          
                DusanMadar
                / TorPrivoxyPython.md
            
            
              Last active
              May 16, 2024 08:35
            
              
                A step-by-step guide how to use Python with Tor and Privoxy
              
          
    A step-by-step guide how to use Python with Tor and Privoxy

Latest revision: 2021-12-05.
Tested on Ubuntu 18.04 Docker container. The Dockerfile is a single line FROM ubuntu:18.04. Alternatively, you can simply run docker run -it ubuntu:18.04 bash.
NOTE: stopping services didn't work for me for some reason. That's why there is kill $(pidof <service name>) after each failed service <service name> stop to kill it.
References


## discordjs-cheatsheet.js
//  Discord all events!
//  A quick and dirty fleshing out of the discord.js event listeners  (not tested at all!)
//     listed here -> https://discord.js.org/#/docs/main/stable/class/Client
//  Learn from this, do not just copy it mofo!
//
//  Saved to -> https://gist.github.com/koad/316b265a91d933fd1b62dddfcc3ff584
//  Last Updated -> Halloween 2022


            /*

## Fractional Indexing (David Greenspan).md

      
              4 files
            
          
              0 forks
            
          
              1 comment
            
          
              4 stars
            
          
                Venryx
                / Fractional Indexing (David Greenspan).md
            
            
              Last active
              May 10, 2024 03:37
            
              
                List of various fractional-indexing schemes, along with language-specific implementations
              
          
    Fractional Indexing (David Greenspan)

Source references:

https://observablehq.com/@dgreensp/implementing-fractional-indexing

Rust


https://github.com/sh-tiye/lexicon-fractional-index

License: Listed as MIT on crates.io, but readme says "License: TODO".


## MinecraftEnergyTypes.md

      
              1 file
            
          
              2 forks
            
          
              27 comments
            
          
              64 stars
            
          
                DeflatedPickle
                / MinecraftEnergyTypes.md
            
            
              Last active
              May 5, 2024 12:10
            
              
                A simple table for Minecraft energy types and a matrix for conversion rates.
              
          
    Minecraft Energy Types


Energy Name
Abbreviation
Original Mod
Version


Anima
AM
Anima-Mundi
1.11.2


Blutricity
BE (NO)
Redpower
1.6.4


Charge
RP (NO)/Fz?
Factorization
1.7.10


Crystal Flux
CF
Actually Additions
1.12


## US Zip Codes from 2013 Government Data
ZIP,LAT,LNG
00601,18.180555, -66.749961
00602,18.361945, -67.175597
00603,18.455183, -67.119887
00606,18.158345, -66.932911
00610,18.295366, -67.125135
00612,18.402253, -66.711397
00616,18.420412, -66.671979
00617,18.445147, -66.559696

## rclone_backup.py
# Python Rclone Script with Telegram and InfluxDB Reporting
# - This Script backups your data to any rclone location (see rclone.org)
# - You can execute scripts, commands and database dumps before running a single rclone command
# - It sends automatic error reports and summaries
# - It saves all statistics and operations to an Influx database
# - The data can be used for visualizations in e.g. Grafana
# - You can automate it by using cron

# Created by: Luca Koroll - https://github.com/lucanello
# Last update: 2021-07-04

## commitCount.sh
curl -I -k "https://api.github.com/repos/:owner/:repo/commits?per_page=1" | sed -n '/^[Ll]ink:/ s/.*"next".*page=\([0-9]*\).*"last".*/\1/p'

### And that's all !
# I saw many fighting with finding first commit SHA or similar fancy thing.
# Here we just rely on the GH API, asking commits at 1 per page and parsing the last page number in the header of the reply (whose body only holds the last commit !)
# So this is robust and bandwidth efficient. :)

# If one want the commit count of a specific SHA, just use :
curl -I -k "https://api.github.com/repos/:owner/:repo/commits?per_page=1&sha=:sha" | sed -n '/^[Ll]ink:/ s/.*"next".*page=\([0-9]*\).*"last".*/\1/p'

## heroku_pg_db_reset.md

      
              1 file
            
          
              60 forks
            
          
              14 comments
            
          
              223 stars
            
          
                zulhfreelancer
                / heroku_pg_db_reset.md
            
            
              Last active
              January 29, 2024 10:09
            
              
                How to reset PG Database on Heroku (for Rails app)?
              
          
    It's important to note that running this reset will drop any existing data you have in the application
How to reset PG Database on Heroku?


Step 1: heroku restart
Step 2: heroku pg:reset DATABASE (no need to change the DATABASE)
Step 3: heroku run rake db:migrate
Step 4: heroku run rake db:seed (if you have seed)

One liner
	// Discord all events!
	// A quick and dirty fleshing out of the discord.js event listeners (not tested at all!)
	// listed here -> https://discord.js.org/#/docs/main/stable/class/Client
	// Learn from this, do not just copy it mofo!
	//
	// Saved to -> https://gist.github.com/koad/316b265a91d933fd1b62dddfcc3ff584
	// Last Updated -> Halloween 2022


	/*
Energy Name	Abbreviation	Original Mod	Version
Anima	AM	Anima-Mundi	1.11.2
Blutricity	BE (NO)	Redpower	1.6.4
Charge	RP (NO)/Fz?	Factorization	1.7.10
Crystal Flux	CF	Actually Additions	1.12
	ZIP,LAT,LNG
	00601,18.180555, -66.749961
	00602,18.361945, -67.175597
	00603,18.455183, -67.119887
	00606,18.158345, -66.932911
	00610,18.295366, -67.125135
	00612,18.402253, -66.711397
	00616,18.420412, -66.671979
	00617,18.445147, -66.559696
	# Python Rclone Script with Telegram and InfluxDB Reporting
	# - This Script backups your data to any rclone location (see rclone.org)
	# - You can execute scripts, commands and database dumps before running a single rclone command
	# - It sends automatic error reports and summaries
	# - It saves all statistics and operations to an Influx database
	# - The data can be used for visualizations in e.g. Grafana
	# - You can automate it by using cron

	# Created by: Luca Koroll - https://github.com/lucanello
	# Last update: 2021-07-04
	curl -I -k "https://api.github.com/repos/:owner/:repo/commits?per_page=1" \| sed -n '/^[Ll]ink:/ s/."next".page=\([0-9]\)."last".*/\1/p'

	### And that's all !
	# I saw many fighting with finding first commit SHA or similar fancy thing.
	# Here we just rely on the GH API, asking commits at 1 per page and parsing the last page number in the header of the reply (whose body only holds the last commit !)
	# So this is robust and bandwidth efficient. :)

	# If one want the commit count of a specific SHA, just use :
	curl -I -k "https://api.github.com/repos/:owner/:repo/commits?per_page=1&sha=:sha" \| sed -n '/^[Ll]ink:/ s/."next".page=\([0-9]\)."last".*/\1/p'