Skip to content

Instantly share code, notes, and snippets.

@coldnew

coldnew/ComPort over Network.md

Forked from DraTeots/ComPort over Network.md
Created July 7, 2017 04:06
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save coldnew/873ecee900acdb4d4da64c89d62d84e1 to your computer and use it in GitHub Desktop.
Save coldnew/873ecee900acdb4d4da64c89d62d84e1 to your computer and use it in GitHub Desktop.
Download ZIP
ComPort over Network
Raw
ComPort over Network.md

Connecting to serial port (com port) over network

(Serial port or com port? - Serial ports are often refered as COM ports. It is the same to be short. You can read abut it in the Wiki article )


## The problem Suppose we have an application that works with some device using serial port (com port). It could be GPS reader, IRDA, whatever. So it looks like this: 
+--------+   serial   +--------------+
| DEVICE | ~~~~~~~~~~ | PC  with APP |
+--------+            +--------------+

Now what we want, is to have the device connected to one machine (server), and run the application on the remote machine (client) over the network. Real life example: a device is connected to ODROID - very small single-board PC that is connected to a local network, and read the data on a desktop.

Since the application knows only how to communicate with the device by serial port (we suppose), the client machine has to have some virtual serial port that is used by the application:

+--------+   comport  +--------+       network        +--------+  virtual comport +---+
| DEVICE | ~~~~~~~~~~ | SERVER |========....==========| CLIENT |~~~~~~~~~~~~~~~~~~|APP|
+--------+            +--------+                      +--------+                  +---+

So now the application just works with serial port on the client machine, and doesn't even know that data is actually transmitted over the network.


## The solution in theory

One of the solutions is using telnet with RFC2217 - Telnet Com Port Control Option. Is solves exactly the problem above. There are a lot of software that supports telnet+RFC2217 serial port forwarding. It allows you to run the server and the client on linux or windows machines (and MACs I suppose, but haven't tested it). Thus can, as example, run linux server and windows client, both using completely different packages, but because of RFC2217 they 'know' how to communicate.

More over you can multiplex the com ports and encrypt the data. Whatever you want.


## The solution in practice

WINDOWS

There are absolutely brilliant free opensoure solution that can be used for comport forwarding, client and server for windows. It is called com0com.

http://sourceforge.net/projects/com0com

There is a version with signed drivers available from GitHub here: https://github.com/Raggles/com0com/releases


##### Server

For the server you need only hub4com part of it. Source forge hub4com download link


*Configuration (I just cite the documentation)*:

You have a server computer with phisical COM1 port and you'd like to share it through the network by the RFC 2217 "Telnet Com Port Control Option" protocol:

Start the com2tcp-rfc2217.bat on COM1 port. For example:

com2tcp-rfc2217 COM1 7000

It will listen TCP/IP port 7000 for incaming connections and redirect them to COM1 port.



##### Client

To be a windows client you have to install com0com virtual comport driver. Source forge download link Create a PAIR of virtual comports where one is used for RFC2217 and the other is the port for your application to use.

(documentation citation) for RFC 2217 client :

You have a server computer your.comport.server with physical serial port shared through the network by the RFC 2217 protocol (see above example) and you'd like to use it on the client computer like a virtual serial port.

With the com0com's Setup Command Prompt create COM5<->CNCB0 virtual COM port pair (see com0com's ReadMe.txt for more info). For example:

>setupc.exe
command> install 0 PortName=COM5,EmuBR=yes -

Start the com2tcp-rfc2217.bat on CNCB0 port. For example:

com2tcp-rfc2217 \\.\CNCB0 192.168.123.30 7000

It will redirect virtual serial port COM5 on the second computer to the physical serial port on the first computer.


#### Driver Signature According to [this bug report](http://sourceforge.net/p/com0com/discussion/440108/thread/13d56079/?limit=25) and my own experience, on Windows 8x64 you probably will get problem with driver installation if you don't have the driver signature verification turned off.

To enable driver test mode and sign a driver for windows, one may download
DSEO

Then run it

Enable Test Mode (if you hasn't done it before) Sign a system file

c:\Windows\System32\drivers\com0com.sys

d:\Tools\ComOverNetwork\com0com\ - is where I installed com0com

Restart the system



### LINUX:

Server

The linux app I've got working pretty easy is ser2net

http://linux.die.net/man/8/ser2net

It has configuration file located at /etc/ser2net.conf. The configuration line (for /etc/ser2net.conf) that corresponds to windows setup above

7000:telnet:0:/dev/ttyUSB0:1000000 8DATABITS NONE 1STOPBIT remctl

Here:

  1. 7000 - port
  2. /dev/ttyUSB0 - name of serial port
  3. 1000000 ... - baud rate etc (actually you can skip it because of remctl)
  4. remctl - means using remote port configuration as of RFC2217

That is it. Read ser2net docs for more

Ubuntu installation

sudo apt-get ser2net            #install
sudo vim /etc/ser2net.conf      #configure
ser2net                         #run service

#### Client Mmmm... Can you write it here, please?
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment