Created
June 25, 2018 03:14
-
-
Save computermouth/0d47c00415efe289c9bc0e6d6f3fd277 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /dts-v1/; | |
| / { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x1>; | |
| interrupt-parent = <0x1>; | |
| model = "Clockwork CPI3"; | |
| compatible = "clockwork,clockworkpi-cpi3", "allwinner,sun8i-a33"; | |
| chosen { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x1>; | |
| ranges; | |
| stdout-path = "serial0:115200n8"; | |
| framebuffer@0 { | |
| compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; | |
| allwinner,pipeline = "de_be0-lcd0"; | |
| clocks = <0x2 0x26 0x2 0x28 0x2 0x57 0x2 0x55 0x2 0x54 0x2 0x62>; | |
| status = "disabled"; | |
| }; | |
| }; | |
| aliases { | |
| serial0 = "/soc@01c00000/serial@01c28000"; | |
| }; | |
| memory { | |
| device_type = "memory"; | |
| reg = <0x40000000 0x80000000>; | |
| }; | |
| timer { | |
| compatible = "arm,armv7-timer"; | |
| interrupts = <0x1 0xd 0xf08 0x1 0xe 0xf08 0x1 0xb 0xf08 0x1 0xa 0xf08>; | |
| clock-frequency = <0x16e3600>; | |
| arm,cpu-registers-not-fw-configured; | |
| }; | |
| cpus { | |
| enable-method = "allwinner,sun8i-a23"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| cpu@0 { | |
| compatible = "arm,cortex-a7"; | |
| device_type = "cpu"; | |
| reg = <0x0>; | |
| clocks = <0x2 0x12>; | |
| clock-names = "cpu"; | |
| operating-points-v2 = <0x3>; | |
| #cooling-cells = <0x2>; | |
| linux,phandle = <0x30>; | |
| phandle = <0x30>; | |
| }; | |
| cpu@1 { | |
| compatible = "arm,cortex-a7"; | |
| device_type = "cpu"; | |
| reg = <0x1>; | |
| operating-points-v2 = <0x3>; | |
| }; | |
| cpu@2 { | |
| compatible = "arm,cortex-a7"; | |
| device_type = "cpu"; | |
| reg = <0x2>; | |
| operating-points-v2 = <0x3>; | |
| }; | |
| cpu@3 { | |
| compatible = "arm,cortex-a7"; | |
| device_type = "cpu"; | |
| reg = <0x3>; | |
| operating-points-v2 = <0x3>; | |
| }; | |
| }; | |
| clocks { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x1>; | |
| ranges; | |
| osc24M_clk { | |
| #clock-cells = <0x0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <0x16e3600>; | |
| clock-accuracy = <0xc350>; | |
| clock-output-names = "osc24M"; | |
| linux,phandle = <0x12>; | |
| phandle = <0x12>; | |
| }; | |
| ext_osc32k_clk { | |
| #clock-cells = <0x0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <0x8000>; | |
| clock-accuracy = <0xc350>; | |
| clock-output-names = "ext-osc32k"; | |
| linux,phandle = <0x19>; | |
| phandle = <0x19>; | |
| }; | |
| }; | |
| soc@01c00000 { | |
| compatible = "simple-bus"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x1>; | |
| ranges; | |
| dma-controller@01c02000 { | |
| compatible = "allwinner,sun8i-a23-dma"; | |
| reg = <0x1c02000 0x1000>; | |
| interrupts = <0x0 0x32 0x4>; | |
| clocks = <0x2 0x19>; | |
| resets = <0x2 0x6>; | |
| #dma-cells = <0x1>; | |
| linux,phandle = <0x15>; | |
| phandle = <0x15>; | |
| }; | |
| mmc@01c0f000 { | |
| compatible = "allwinner,sun7i-a20-mmc"; | |
| reg = <0x1c0f000 0x1000>; | |
| clocks = <0x2 0x1a 0x2 0x3c 0x2 0x3e 0x2 0x3d>; | |
| clock-names = "ahb", "mmc", "output", "sample"; | |
| resets = <0x2 0x7>; | |
| reset-names = "ahb"; | |
| interrupts = <0x0 0x3c 0x4>; | |
| status = "okay"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x4 0x5>; | |
| vmmc-supply = <0x6>; | |
| cd-gpios = <0x7 0x1 0x3 0x1>; | |
| bus-width = <0x4>; | |
| }; | |
| mmc@01c10000 { | |
| compatible = "allwinner,sun7i-a20-mmc"; | |
| reg = <0x1c10000 0x1000>; | |
| clocks = <0x2 0x1b 0x2 0x3f 0x2 0x41 0x2 0x40>; | |
| clock-names = "ahb", "mmc", "output", "sample"; | |
| resets = <0x2 0x8>; | |
| reset-names = "ahb"; | |
| interrupts = <0x0 0x3d 0x4>; | |
| status = "okay"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x8 0x9>; | |
| vmmc-supply = <0xa>; | |
| mmc-pwrseq = <0xb>; | |
| bus-width = <0x4>; | |
| non-removable; | |
| keep-power-in-suspend; | |
| }; | |
| mmc@01c11000 { | |
| compatible = "allwinner,sun7i-a20-mmc"; | |
| reg = <0x1c11000 0x1000>; | |
| clocks = <0x2 0x1c 0x2 0x42 0x2 0x44 0x2 0x43>; | |
| clock-names = "ahb", "mmc", "output", "sample"; | |
| resets = <0x2 0x9>; | |
| reset-names = "ahb"; | |
| interrupts = <0x0 0x3e 0x4>; | |
| status = "disabled"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| }; | |
| nand@01c03000 { | |
| compatible = "allwinner,sun4i-a10-nand"; | |
| reg = <0x1c03000 0x1000>; | |
| interrupts = <0x0 0x46 0x4>; | |
| clocks = <0x2 0x1d 0x2 0x3b>; | |
| clock-names = "ahb", "mod"; | |
| resets = <0x2 0xa>; | |
| reset-names = "ahb"; | |
| status = "disabled"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| }; | |
| usb@01c19000 { | |
| reg = <0x1c19000 0x400>; | |
| clocks = <0x2 0x22>; | |
| resets = <0x2 0xf>; | |
| interrupts = <0x0 0x47 0x4>; | |
| interrupt-names = "mc"; | |
| phys = <0xc 0x0>; | |
| phy-names = "usb"; | |
| extcon = <0xc 0x0>; | |
| status = "okay"; | |
| compatible = "allwinner,sun8i-a33-musb"; | |
| dr_mode = "otg"; | |
| }; | |
| phy@01c19400 { | |
| clocks = <0x2 0x4a 0x2 0x4b>; | |
| clock-names = "usb0_phy", "usb1_phy"; | |
| resets = <0x2 0x0 0x2 0x1>; | |
| reset-names = "usb0_reset", "usb1_reset"; | |
| status = "okay"; | |
| #phy-cells = <0x1>; | |
| compatible = "allwinner,sun8i-a33-usb-phy"; | |
| reg = <0x1c19400 0x14 0x1c1a800 0x4>; | |
| reg-names = "phy_ctrl", "pmu1"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0xd>; | |
| usb0_vbus-supply = <0xe>; | |
| usb0_id_det-gpios = <0xf 0x0 0x4 0x0>; | |
| usb0_vbus_power-supply = <0x10>; | |
| usb1_vbus-supply = <0x11>; | |
| linux,phandle = <0xc>; | |
| phandle = <0xc>; | |
| }; | |
| usb@01c1a000 { | |
| compatible = "allwinner,sun8i-a23-ehci", "generic-ehci"; | |
| reg = <0x1c1a000 0x100>; | |
| interrupts = <0x0 0x48 0x4>; | |
| clocks = <0x2 0x23>; | |
| resets = <0x2 0x10>; | |
| phys = <0xc 0x1>; | |
| phy-names = "usb"; | |
| status = "okay"; | |
| }; | |
| usb@01c1a400 { | |
| compatible = "allwinner,sun8i-a23-ohci", "generic-ohci"; | |
| reg = <0x1c1a400 0x100>; | |
| interrupts = <0x0 0x49 0x4>; | |
| clocks = <0x2 0x24 0x2 0x4e>; | |
| resets = <0x2 0x11>; | |
| phys = <0xc 0x1>; | |
| phy-names = "usb"; | |
| status = "okay"; | |
| }; | |
| clock@01c20000 { | |
| reg = <0x1c20000 0x400>; | |
| clocks = <0x12 0x13 0x0>; | |
| clock-names = "hosc", "losc"; | |
| #clock-cells = <0x1>; | |
| #reset-cells = <0x1>; | |
| compatible = "allwinner,sun8i-a33-ccu"; | |
| linux,phandle = <0x2>; | |
| phandle = <0x2>; | |
| }; | |
| pinctrl@01c20800 { | |
| reg = <0x1c20800 0x400>; | |
| clocks = <0x2 0x30 0x12 0x13 0x0>; | |
| clock-names = "apb", "hosc", "losc"; | |
| gpio-controller; | |
| interrupt-controller; | |
| #interrupt-cells = <0x3>; | |
| #gpio-cells = <0x3>; | |
| compatible = "allwinner,sun8i-a33-pinctrl"; | |
| interrupts = <0x0 0xf 0x4 0x0 0x11 0x4>; | |
| linux,phandle = <0x7>; | |
| phandle = <0x7>; | |
| uart0@0 { | |
| pins = "PF2", "PF4"; | |
| function = "uart0"; | |
| }; | |
| uart1@0 { | |
| pins = "PG6", "PG7"; | |
| function = "uart1"; | |
| }; | |
| uart1-cts-rts@0 { | |
| pins = "PG8", "PG9"; | |
| function = "uart1"; | |
| }; | |
| mmc0@0 { | |
| pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; | |
| function = "mmc0"; | |
| drive-strength = <0x1e>; | |
| bias-pull-up; | |
| linux,phandle = <0x4>; | |
| phandle = <0x4>; | |
| }; | |
| mmc1@0 { | |
| pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; | |
| function = "mmc1"; | |
| drive-strength = <0x1e>; | |
| bias-pull-up; | |
| linux,phandle = <0x8>; | |
| phandle = <0x8>; | |
| }; | |
| mmc2_8bit { | |
| pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC16"; | |
| function = "mmc2"; | |
| drive-strength = <0x1e>; | |
| bias-pull-up; | |
| }; | |
| pwm0 { | |
| pins = "PH0"; | |
| function = "pwm0"; | |
| }; | |
| i2c0@0 { | |
| pins = "PH2", "PH3"; | |
| function = "i2c0"; | |
| }; | |
| i2c1@0 { | |
| pins = "PH4", "PH5"; | |
| function = "i2c1"; | |
| linux,phandle = <0x17>; | |
| phandle = <0x17>; | |
| }; | |
| i2c2@0 { | |
| pins = "PE12", "PE13"; | |
| function = "i2c2"; | |
| }; | |
| lcd-rgb666@0 { | |
| pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", "PD24", "PD25", "PD26", "PD27"; | |
| function = "lcd0"; | |
| }; | |
| uart0@1 { | |
| pins = "PB0", "PB1"; | |
| function = "uart0"; | |
| linux,phandle = <0x16>; | |
| phandle = <0x16>; | |
| }; | |
| mmc0_cd_pin@0 { | |
| pins = "PB3"; | |
| function = "gpio_in"; | |
| bias-pull-up; | |
| linux,phandle = <0x5>; | |
| phandle = <0x5>; | |
| }; | |
| led_pins@0 { | |
| pins = "PB7"; | |
| function = "gpio_out"; | |
| linux,phandle = <0x36>; | |
| phandle = <0x36>; | |
| }; | |
| backlight_control_pin@0 { | |
| pins = "PH1"; | |
| function = "gpio_out"; | |
| linux,phandle = <0x37>; | |
| phandle = <0x37>; | |
| }; | |
| }; | |
| timer@01c20c00 { | |
| compatible = "allwinner,sun4i-a10-timer"; | |
| reg = <0x1c20c00 0xa0>; | |
| interrupts = <0x0 0x12 0x4 0x0 0x13 0x4>; | |
| clocks = <0x12>; | |
| }; | |
| watchdog@01c20ca0 { | |
| compatible = "allwinner,sun6i-a31-wdt"; | |
| reg = <0x1c20ca0 0x20>; | |
| interrupts = <0x0 0x19 0x4>; | |
| }; | |
| pwm@01c21400 { | |
| compatible = "allwinner,sun7i-a20-pwm"; | |
| reg = <0x1c21400 0xc>; | |
| clocks = <0x12>; | |
| #pwm-cells = <0x3>; | |
| status = "disabled"; | |
| }; | |
| lradc@01c22800 { | |
| compatible = "allwinner,sun4i-a10-lradc-keys"; | |
| reg = <0x1c22800 0x100>; | |
| interrupts = <0x0 0x1e 0x4>; | |
| status = "okay"; | |
| vref-supply = <0x14>; | |
| button@0 { | |
| label = "V+"; | |
| linux,code = <0x73>; | |
| channel = <0x0>; | |
| voltage = <0x2e630>; | |
| }; | |
| button@1 { | |
| label = "V-"; | |
| linux,code = <0x72>; | |
| channel = <0x0>; | |
| voltage = <0x5f370>; | |
| }; | |
| }; | |
| serial@01c28000 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x1c28000 0x400>; | |
| interrupts = <0x0 0x0 0x4>; | |
| reg-shift = <0x2>; | |
| reg-io-width = <0x4>; | |
| clocks = <0x2 0x36>; | |
| resets = <0x2 0x23>; | |
| dmas = <0x15 0x6 0x15 0x6>; | |
| dma-names = "rx", "tx"; | |
| status = "okay"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x16>; | |
| }; | |
| serial@01c28400 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x1c28400 0x400>; | |
| interrupts = <0x0 0x1 0x4>; | |
| reg-shift = <0x2>; | |
| reg-io-width = <0x4>; | |
| clocks = <0x2 0x37>; | |
| resets = <0x2 0x24>; | |
| dmas = <0x15 0x7 0x15 0x7>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| }; | |
| serial@01c28800 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x1c28800 0x400>; | |
| interrupts = <0x0 0x2 0x4>; | |
| reg-shift = <0x2>; | |
| reg-io-width = <0x4>; | |
| clocks = <0x2 0x38>; | |
| resets = <0x2 0x25>; | |
| dmas = <0x15 0x8 0x15 0x8>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| }; | |
| serial@01c28c00 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x1c28c00 0x400>; | |
| interrupts = <0x0 0x3 0x4>; | |
| reg-shift = <0x2>; | |
| reg-io-width = <0x4>; | |
| clocks = <0x2 0x39>; | |
| resets = <0x2 0x26>; | |
| dmas = <0x15 0x9 0x15 0x9>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| }; | |
| serial@01c29000 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x1c29000 0x400>; | |
| interrupts = <0x0 0x4 0x4>; | |
| reg-shift = <0x2>; | |
| reg-io-width = <0x4>; | |
| clocks = <0x2 0x3a>; | |
| resets = <0x2 0x27>; | |
| dmas = <0x15 0xa 0x15 0xa>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| }; | |
| i2c@01c2ac00 { | |
| compatible = "allwinner,sun6i-a31-i2c"; | |
| reg = <0x1c2ac00 0x400>; | |
| interrupts = <0x0 0x6 0x4>; | |
| clocks = <0x2 0x33>; | |
| resets = <0x2 0x20>; | |
| status = "disabled"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| }; | |
| i2c@01c2b000 { | |
| compatible = "allwinner,sun6i-a31-i2c"; | |
| reg = <0x1c2b000 0x400>; | |
| interrupts = <0x0 0x7 0x4>; | |
| clocks = <0x2 0x34>; | |
| resets = <0x2 0x21>; | |
| status = "okay"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x17>; | |
| }; | |
| i2c@01c2b400 { | |
| compatible = "allwinner,sun6i-a31-i2c"; | |
| reg = <0x1c2b400 0x400>; | |
| interrupts = <0x0 0x8 0x4>; | |
| clocks = <0x2 0x35>; | |
| resets = <0x2 0x22>; | |
| status = "disabled"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| }; | |
| gpu@1c40000 { | |
| compatible = "allwinner,sun8i-a23-mali", "allwinner,sun7i-a20-mali", "arm,mali-400"; | |
| reg = <0x1c40000 0x10000>; | |
| interrupts = <0x0 0x61 0x4 0x0 0x62 0x4 0x0 0x63 0x4 0x0 0x64 0x4 0x0 0x66 0x4 0x0 0x67 0x4 0x0 0x65 0x4>; | |
| interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", "ppmmu1", "pmu"; | |
| clocks = <0x2 0x2a 0x2 0x63>; | |
| clock-names = "bus", "core"; | |
| resets = <0x2 0x17>; | |
| #cooling-cells = <0x2>; | |
| assigned-clocks = <0x2 0x63>; | |
| assigned-clock-rates = <0x16e36000>; | |
| operating-points-v2 = <0x18>; | |
| linux,phandle = <0x33>; | |
| phandle = <0x33>; | |
| }; | |
| interrupt-controller@01c81000 { | |
| compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; | |
| reg = <0x1c81000 0x1000 0x1c82000 0x2000 0x1c84000 0x2000 0x1c86000 0x2000>; | |
| interrupt-controller; | |
| #interrupt-cells = <0x3>; | |
| interrupts = <0x1 0x9 0xf04>; | |
| linux,phandle = <0x1>; | |
| phandle = <0x1>; | |
| }; | |
| rtc@01f00000 { | |
| compatible = "allwinner,sun6i-a31-rtc"; | |
| reg = <0x1f00000 0x54>; | |
| interrupts = <0x0 0x28 0x4 0x0 0x29 0x4>; | |
| clock-output-names = "osc32k"; | |
| clocks = <0x19>; | |
| #clock-cells = <0x1>; | |
| linux,phandle = <0x13>; | |
| phandle = <0x13>; | |
| }; | |
| interrupt-controller@1f00c00 { | |
| compatible = "allwinner,sun6i-a31-r-intc"; | |
| interrupt-controller; | |
| #interrupt-cells = <0x2>; | |
| reg = <0x1f00c00 0x400>; | |
| interrupts = <0x0 0x20 0x4>; | |
| linux,phandle = <0x21>; | |
| phandle = <0x21>; | |
| }; | |
| prcm@01f01400 { | |
| compatible = "allwinner,sun8i-a23-prcm"; | |
| reg = <0x1f01400 0x200>; | |
| ar100_clk { | |
| compatible = "fixed-factor-clock"; | |
| #clock-cells = <0x0>; | |
| clock-div = <0x1>; | |
| clock-mult = <0x1>; | |
| clocks = <0x12>; | |
| clock-output-names = "ar100"; | |
| linux,phandle = <0x1a>; | |
| phandle = <0x1a>; | |
| }; | |
| ahb0_clk { | |
| compatible = "fixed-factor-clock"; | |
| #clock-cells = <0x0>; | |
| clock-div = <0x1>; | |
| clock-mult = <0x1>; | |
| clocks = <0x1a>; | |
| clock-output-names = "ahb0"; | |
| linux,phandle = <0x1b>; | |
| phandle = <0x1b>; | |
| }; | |
| apb0_clk { | |
| compatible = "allwinner,sun8i-a23-apb0-clk"; | |
| #clock-cells = <0x0>; | |
| clocks = <0x1b>; | |
| clock-output-names = "apb0"; | |
| linux,phandle = <0x1c>; | |
| phandle = <0x1c>; | |
| }; | |
| apb0_gates_clk { | |
| compatible = "allwinner,sun8i-a23-apb0-gates-clk"; | |
| #clock-cells = <0x1>; | |
| clocks = <0x1c>; | |
| clock-output-names = "apb0_pio", "apb0_timer", "apb0_rsb", "apb0_uart", "apb0_i2c"; | |
| linux,phandle = <0x1e>; | |
| phandle = <0x1e>; | |
| }; | |
| apb0_rst { | |
| compatible = "allwinner,sun6i-a31-clock-reset"; | |
| #reset-cells = <0x1>; | |
| linux,phandle = <0x1f>; | |
| phandle = <0x1f>; | |
| }; | |
| codec-analog { | |
| compatible = "allwinner,sun8i-a23-codec-analog"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x1d>; | |
| speaker-amplifier-gpios = <0xf 0x0 0x3 0x0>; | |
| interrupts = <0x0 0x2e 0x4>; | |
| linux,phandle = <0x2c>; | |
| phandle = <0x2c>; | |
| }; | |
| }; | |
| cpucfg@01f01c00 { | |
| compatible = "allwinner,sun8i-a23-cpuconfig"; | |
| reg = <0x1f01c00 0x300>; | |
| }; | |
| serial@01f02800 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x1f02800 0x400>; | |
| interrupts = <0x0 0x26 0x4>; | |
| reg-shift = <0x2>; | |
| reg-io-width = <0x4>; | |
| clocks = <0x1e 0x4>; | |
| resets = <0x1f 0x4>; | |
| status = "disabled"; | |
| }; | |
| pinctrl@01f02c00 { | |
| compatible = "allwinner,sun8i-a23-r-pinctrl"; | |
| reg = <0x1f02c00 0x400>; | |
| interrupts = <0x0 0x2d 0x4>; | |
| clocks = <0x1e 0x0 0x12 0x13 0x0>; | |
| clock-names = "apb", "hosc", "losc"; | |
| resets = <0x1f 0x0>; | |
| gpio-controller; | |
| interrupt-controller; | |
| #interrupt-cells = <0x3>; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| #gpio-cells = <0x3>; | |
| linux,phandle = <0xf>; | |
| phandle = <0xf>; | |
| r_rsb { | |
| pins = "PL0", "PL1"; | |
| function = "s_rsb"; | |
| drive-strength = <0x14>; | |
| bias-pull-up; | |
| linux,phandle = <0x20>; | |
| phandle = <0x20>; | |
| }; | |
| r_uart@0 { | |
| pins = "PL2", "PL3"; | |
| function = "s_uart"; | |
| }; | |
| usb1_vbus_pin@0 { | |
| pins = "PL2"; | |
| function = "gpio_out"; | |
| linux,phandle = <0x35>; | |
| phandle = <0x35>; | |
| }; | |
| speaker_amplifier_pin@0 { | |
| pins = "PL3"; | |
| function = "gpio_out"; | |
| linux,phandle = <0x1d>; | |
| phandle = <0x1d>; | |
| }; | |
| usb0_id_detect_pin@0 { | |
| pins = "PL4"; | |
| function = "gpio_in"; | |
| bias-pull-up; | |
| linux,phandle = <0xd>; | |
| phandle = <0xd>; | |
| }; | |
| wifi_reset_pin@0 { | |
| pins = "PL6"; | |
| function = "gpio_out"; | |
| linux,phandle = <0x9>; | |
| phandle = <0x9>; | |
| }; | |
| headset_det@0 { | |
| pins = "PL11"; | |
| function = "gpio_in"; | |
| }; | |
| }; | |
| rsb@01f03400 { | |
| compatible = "allwinner,sun8i-a23-rsb"; | |
| reg = <0x1f03400 0x400>; | |
| interrupts = <0x0 0x27 0x4>; | |
| clocks = <0x1e 0x3>; | |
| clock-frequency = <0x2dc6c0>; | |
| resets = <0x1f 0x3>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x20>; | |
| status = "okay"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| pmic@3a3 { | |
| compatible = "x-powers,axp223"; | |
| reg = <0x3a3>; | |
| interrupt-parent = <0x21>; | |
| interrupts = <0x0 0x8>; | |
| drivevbus-supply = <0x22>; | |
| x-powers,drive-vbus-en; | |
| interrupt-controller; | |
| #interrupt-cells = <0x1>; | |
| ac-power-supply { | |
| compatible = "x-powers,axp221-ac-power-supply"; | |
| status = "disabled"; | |
| }; | |
| battery-power-supply { | |
| compatible = "x-powers,axp221-battery-power-supply"; | |
| status = "okay"; | |
| }; | |
| regulators { | |
| x-powers,dcdc-freq = <0xbb8>; | |
| dcdc1 { | |
| regulator-name = "vcc-3v0"; | |
| regulator-always-on; | |
| regulator-min-microvolt = <0x2dc6c0>; | |
| regulator-max-microvolt = <0x2dc6c0>; | |
| linux,phandle = <0x6>; | |
| phandle = <0x6>; | |
| }; | |
| dcdc2 { | |
| regulator-name = "vdd-sys"; | |
| regulator-always-on; | |
| regulator-min-microvolt = <0x10c8e0>; | |
| regulator-max-microvolt = <0x10c8e0>; | |
| }; | |
| dcdc3 { | |
| regulator-name = "vdd-cpu"; | |
| regulator-always-on; | |
| regulator-min-microvolt = <0x124f80>; | |
| regulator-max-microvolt = <0x124f80>; | |
| }; | |
| dcdc4 { | |
| regulator-name = "dcdc4"; | |
| }; | |
| dcdc5 { | |
| regulator-name = "vcc-dram"; | |
| regulator-always-on; | |
| regulator-min-microvolt = <0x16e360>; | |
| regulator-max-microvolt = <0x16e360>; | |
| }; | |
| dc1sw { | |
| regulator-name = "dc1sw"; | |
| }; | |
| dc5ldo { | |
| regulator-name = "vdd-cpus"; | |
| regulator-always-on; | |
| regulator-min-microvolt = <0x10c8e0>; | |
| regulator-max-microvolt = <0x10c8e0>; | |
| }; | |
| aldo1 { | |
| regulator-name = "vcc-io"; | |
| regulator-always-on; | |
| regulator-min-microvolt = <0x2dc6c0>; | |
| regulator-max-microvolt = <0x2dc6c0>; | |
| linux,phandle = <0xa>; | |
| phandle = <0xa>; | |
| }; | |
| aldo2 { | |
| regulator-name = "vdd-dll"; | |
| regulator-always-on; | |
| regulator-min-microvolt = <0x2625a0>; | |
| regulator-max-microvolt = <0x2625a0>; | |
| }; | |
| aldo3 { | |
| regulator-name = "vcc-pll-avcc"; | |
| regulator-always-on; | |
| regulator-min-microvolt = <0x2dc6c0>; | |
| regulator-max-microvolt = <0x2dc6c0>; | |
| linux,phandle = <0x14>; | |
| phandle = <0x14>; | |
| }; | |
| dldo1 { | |
| regulator-name = "vcc-wifi0"; | |
| regulator-always-on; | |
| regulator-min-microvolt = <0x325aa0>; | |
| regulator-max-microvolt = <0x325aa0>; | |
| }; | |
| dldo2 { | |
| regulator-name = "vcc-wifi1"; | |
| regulator-always-on; | |
| regulator-min-microvolt = <0x325aa0>; | |
| regulator-max-microvolt = <0x325aa0>; | |
| }; | |
| dldo3 { | |
| regulator-name = "vcc-3v0-csi"; | |
| regulator-min-microvolt = <0x2dc6c0>; | |
| regulator-max-microvolt = <0x2dc6c0>; | |
| }; | |
| dldo4 { | |
| regulator-name = "dldo4"; | |
| }; | |
| eldo1 { | |
| regulator-name = "vcc-1v2-hsic"; | |
| regulator-min-microvolt = <0x124f80>; | |
| regulator-max-microvolt = <0x124f80>; | |
| }; | |
| eldo2 { | |
| regulator-name = "vcc-dsp"; | |
| regulator-min-microvolt = <0x2dc6c0>; | |
| regulator-max-microvolt = <0x2dc6c0>; | |
| }; | |
| eldo3 { | |
| regulator-name = "eldo3"; | |
| regulator-min-microvolt = <0x2dc6c0>; | |
| regulator-max-microvolt = <0x2dc6c0>; | |
| }; | |
| ldo_io0 { | |
| regulator-name = "ldo_io0"; | |
| status = "disabled"; | |
| }; | |
| ldo_io1 { | |
| regulator-name = "ldo_io1"; | |
| status = "disabled"; | |
| }; | |
| rtc_ldo { | |
| regulator-always-on; | |
| regulator-min-microvolt = <0x2dc6c0>; | |
| regulator-max-microvolt = <0x2dc6c0>; | |
| regulator-name = "rtc_ldo"; | |
| }; | |
| drivevbus { | |
| regulator-name = "usb0-vbus"; | |
| status = "okay"; | |
| linux,phandle = <0xe>; | |
| phandle = <0xe>; | |
| }; | |
| }; | |
| usb_power_supply { | |
| compatible = "x-powers,axp223-usb-power-supply"; | |
| status = "okay"; | |
| linux,phandle = <0x10>; | |
| phandle = <0x10>; | |
| }; | |
| }; | |
| }; | |
| lcd-controller@01c0c000 { | |
| compatible = "allwinner,sun8i-a33-tcon"; | |
| reg = <0x1c0c000 0x1000>; | |
| interrupts = <0x0 0x56 0x4>; | |
| clocks = <0x2 0x26 0x2 0x57>; | |
| clock-names = "ahb", "tcon-ch0"; | |
| clock-output-names = "tcon-pixel-clock"; | |
| resets = <0x2 0x13>; | |
| reset-names = "lcd"; | |
| status = "disabled"; | |
| ports { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| port@0 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x0>; | |
| endpoint@0 { | |
| reg = <0x0>; | |
| remote-endpoint = <0x23>; | |
| linux,phandle = <0x28>; | |
| phandle = <0x28>; | |
| }; | |
| }; | |
| port@1 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x1>; | |
| }; | |
| }; | |
| }; | |
| crypto-engine@01c15000 { | |
| compatible = "allwinner,sun4i-a10-crypto"; | |
| reg = <0x1c15000 0x1000>; | |
| interrupts = <0x0 0x50 0x4>; | |
| clocks = <0x2 0x18 0x2 0x45>; | |
| clock-names = "ahb", "mod"; | |
| resets = <0x2 0x5>; | |
| reset-names = "ahb"; | |
| }; | |
| dai@01c22c00 { | |
| #sound-dai-cells = <0x0>; | |
| compatible = "allwinner,sun6i-a31-i2s"; | |
| reg = <0x1c22c00 0x200>; | |
| interrupts = <0x0 0x1d 0x4>; | |
| clocks = <0x2 0x2f 0x2 0x5c>; | |
| clock-names = "apb", "mod"; | |
| resets = <0x2 0x1d>; | |
| dmas = <0x15 0xf 0x15 0xf>; | |
| dma-names = "rx", "tx"; | |
| status = "okay"; | |
| linux,phandle = <0x2d>; | |
| phandle = <0x2d>; | |
| }; | |
| codec@01c22e00 { | |
| #sound-dai-cells = <0x0>; | |
| compatible = "allwinner,sun8i-a33-codec"; | |
| reg = <0x1c22e00 0x400>; | |
| interrupts = <0x0 0x1d 0x4>; | |
| clocks = <0x2 0x2f 0x2 0x5c>; | |
| clock-names = "bus", "mod"; | |
| status = "okay"; | |
| linux,phandle = <0x2e>; | |
| phandle = <0x2e>; | |
| }; | |
| ths@01c25000 { | |
| compatible = "allwinner,sun8i-a33-ths"; | |
| reg = <0x1c25000 0x100>; | |
| #thermal-sensor-cells = <0x0>; | |
| #io-channel-cells = <0x0>; | |
| linux,phandle = <0x2a>; | |
| phandle = <0x2a>; | |
| }; | |
| display-frontend@01e00000 { | |
| compatible = "allwinner,sun8i-a33-display-frontend"; | |
| reg = <0x1e00000 0x20000>; | |
| interrupts = <0x0 0x5d 0x4>; | |
| clocks = <0x2 0x29 0x2 0x56 0x2 0x53>; | |
| clock-names = "ahb", "mod", "ram"; | |
| resets = <0x2 0x16>; | |
| status = "disabled"; | |
| linux,phandle = <0x29>; | |
| phandle = <0x29>; | |
| ports { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| port@1 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x1>; | |
| endpoint@0 { | |
| reg = <0x0>; | |
| remote-endpoint = <0x24>; | |
| linux,phandle = <0x25>; | |
| phandle = <0x25>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| display-backend@01e60000 { | |
| compatible = "allwinner,sun8i-a33-display-backend"; | |
| reg = <0x1e60000 0x10000 0x1e80000 0x1000>; | |
| reg-names = "be", "sat"; | |
| interrupts = <0x0 0x5f 0x4>; | |
| clocks = <0x2 0x28 0x2 0x55 0x2 0x54 0x2 0x2e>; | |
| clock-names = "ahb", "mod", "ram", "sat"; | |
| resets = <0x2 0x15 0x2 0x1b>; | |
| reset-names = "be", "sat"; | |
| assigned-clocks = <0x2 0x55>; | |
| assigned-clock-rates = <0x11e1a300>; | |
| ports { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| port@0 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x0>; | |
| endpoint@0 { | |
| reg = <0x0>; | |
| remote-endpoint = <0x25>; | |
| linux,phandle = <0x24>; | |
| phandle = <0x24>; | |
| }; | |
| }; | |
| port@1 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x1>; | |
| endpoint@0 { | |
| reg = <0x0>; | |
| remote-endpoint = <0x26>; | |
| linux,phandle = <0x27>; | |
| phandle = <0x27>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| drc@01e70000 { | |
| compatible = "allwinner,sun8i-a33-drc"; | |
| reg = <0x1e70000 0x10000>; | |
| interrupts = <0x0 0x5b 0x4>; | |
| clocks = <0x2 0x2d 0x2 0x62 0x2 0x52>; | |
| clock-names = "ahb", "mod", "ram"; | |
| resets = <0x2 0x1a>; | |
| assigned-clocks = <0x2 0x62>; | |
| assigned-clock-rates = <0x11e1a300>; | |
| ports { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| port@0 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x0>; | |
| endpoint@0 { | |
| reg = <0x0>; | |
| remote-endpoint = <0x27>; | |
| linux,phandle = <0x26>; | |
| phandle = <0x26>; | |
| }; | |
| }; | |
| port@1 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x1>; | |
| endpoint@0 { | |
| reg = <0x0>; | |
| remote-endpoint = <0x28>; | |
| linux,phandle = <0x23>; | |
| phandle = <0x23>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| }; | |
| opp_table0 { | |
| compatible = "operating-points-v2"; | |
| opp-shared; | |
| linux,phandle = <0x3>; | |
| phandle = <0x3>; | |
| opp-120000000 { | |
| opp-hz = <0x0 0x7270e00>; | |
| opp-microvolt = <0xfde80>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp-240000000 { | |
| opp-hz = <0x0 0xe4e1c00>; | |
| opp-microvolt = <0xfde80>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp-312000000 { | |
| opp-hz = <0x0 0x1298be00>; | |
| opp-microvolt = <0xfde80>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp-408000000 { | |
| opp-hz = <0x0 0x18519600>; | |
| opp-microvolt = <0xfde80>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp-480000000 { | |
| opp-hz = <0x0 0x1c9c3800>; | |
| opp-microvolt = <0xfde80>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp-504000000 { | |
| opp-hz = <0x0 0x1e0a6e00>; | |
| opp-microvolt = <0xfde80>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp-600000000 { | |
| opp-hz = <0x0 0x23c34600>; | |
| opp-microvolt = <0xfde80>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp-648000000 { | |
| opp-hz = <0x0 0x269fb200>; | |
| opp-microvolt = <0xfde80>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp-720000000 { | |
| opp-hz = <0x0 0x2aea5400>; | |
| opp-microvolt = <0x10c8e0>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp-816000000 { | |
| opp-hz = <0x0 0x30a32c00>; | |
| opp-microvolt = <0x10c8e0>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp-912000000 { | |
| opp-hz = <0x0 0x365c0400>; | |
| opp-microvolt = <0x124f80>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp-1008000000 { | |
| opp-hz = <0x0 0x3c14dc00>; | |
| opp-microvolt = <0x124f80>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| }; | |
| display-engine { | |
| compatible = "allwinner,sun8i-a33-display-engine"; | |
| allwinner,pipelines = <0x29>; | |
| status = "disabled"; | |
| }; | |
| iio-hwmon { | |
| compatible = "iio-hwmon"; | |
| io-channels = <0x2a>; | |
| }; | |
| gpu-opp-table { | |
| compatible = "operating-points-v2"; | |
| linux,phandle = <0x18>; | |
| phandle = <0x18>; | |
| opp-144000000 { | |
| opp-hz = <0x0 0x8954400>; | |
| }; | |
| opp-240000000 { | |
| opp-hz = <0x0 0xe4e1c00>; | |
| }; | |
| opp-384000000 { | |
| opp-hz = <0x0 0x16e36000>; | |
| }; | |
| }; | |
| sound { | |
| compatible = "simple-audio-card"; | |
| simple-audio-card,name = "sun8i-a33-audio"; | |
| simple-audio-card,format = "i2s"; | |
| simple-audio-card,frame-master = <0x2b>; | |
| simple-audio-card,bitclock-master = <0x2b>; | |
| simple-audio-card,mclk-fs = <0x200>; | |
| simple-audio-card,aux-devs = <0x2c>; | |
| simple-audio-card,routing = "Left DAC", "AIF1 Slot 0 Left", "Right DAC", "AIF1 Slot 0 Right"; | |
| status = "okay"; | |
| simple-audio-card,cpu { | |
| sound-dai = <0x2d>; | |
| }; | |
| simple-audio-card,codec { | |
| sound-dai = <0x2e>; | |
| linux,phandle = <0x2b>; | |
| phandle = <0x2b>; | |
| }; | |
| }; | |
| thermal-zones { | |
| cpu_thermal { | |
| polling-delay-passive = <0xfa>; | |
| polling-delay = <0x3e8>; | |
| thermal-sensors = <0x2a>; | |
| cooling-maps { | |
| map0 { | |
| trip = <0x2f>; | |
| cooling-device = <0x30 0xffffffff 0xffffffff>; | |
| }; | |
| map1 { | |
| trip = <0x31>; | |
| cooling-device = <0x30 0xffffffff 0xffffffff>; | |
| }; | |
| map2 { | |
| trip = <0x32>; | |
| cooling-device = <0x33 0x1 0xffffffff>; | |
| }; | |
| map3 { | |
| trip = <0x34>; | |
| cooling-device = <0x33 0x2 0xffffffff>; | |
| }; | |
| }; | |
| trips { | |
| cpu_alert0 { | |
| temperature = <0x124f8>; | |
| hysteresis = <0x7d0>; | |
| type = "passive"; | |
| linux,phandle = <0x2f>; | |
| phandle = <0x2f>; | |
| }; | |
| gpu_alert0 { | |
| temperature = <0x14c08>; | |
| hysteresis = <0x7d0>; | |
| type = "passive"; | |
| linux,phandle = <0x32>; | |
| phandle = <0x32>; | |
| }; | |
| cpu_alert1 { | |
| temperature = <0x15f90>; | |
| hysteresis = <0x7d0>; | |
| type = "hot"; | |
| linux,phandle = <0x31>; | |
| phandle = <0x31>; | |
| }; | |
| gpu_alert1 { | |
| temperature = <0x17318>; | |
| hysteresis = <0x7d0>; | |
| type = "hot"; | |
| linux,phandle = <0x34>; | |
| phandle = <0x34>; | |
| }; | |
| cpu_crit { | |
| temperature = <0x1adb0>; | |
| hysteresis = <0x7d0>; | |
| type = "critical"; | |
| }; | |
| }; | |
| }; | |
| }; | |
| ahci-5v { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "ahci-5v"; | |
| regulator-min-microvolt = <0x4c4b40>; | |
| regulator-max-microvolt = <0x4c4b40>; | |
| regulator-boot-on; | |
| enable-active-high; | |
| gpio = <0x7 0x1 0x8 0x0>; | |
| status = "disabled"; | |
| }; | |
| usb0-vbus { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "usb0-vbus"; | |
| regulator-min-microvolt = <0x4c4b40>; | |
| regulator-max-microvolt = <0x4c4b40>; | |
| enable-active-high; | |
| gpio = <0x7 0x1 0x9 0x0>; | |
| status = "disabled"; | |
| }; | |
| usb1-vbus { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "usb1-vbus"; | |
| regulator-min-microvolt = <0x4c4b40>; | |
| regulator-max-microvolt = <0x4c4b40>; | |
| regulator-boot-on; | |
| enable-active-high; | |
| gpio = <0xf 0x0 0x2 0x0>; | |
| status = "okay"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x35>; | |
| linux,phandle = <0x11>; | |
| phandle = <0x11>; | |
| }; | |
| usb2-vbus { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "usb2-vbus"; | |
| regulator-min-microvolt = <0x4c4b40>; | |
| regulator-max-microvolt = <0x4c4b40>; | |
| regulator-boot-on; | |
| enable-active-high; | |
| gpio = <0x7 0x7 0x3 0x0>; | |
| status = "disabled"; | |
| }; | |
| vcc3v0 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vcc3v0"; | |
| regulator-min-microvolt = <0x2dc6c0>; | |
| regulator-max-microvolt = <0x2dc6c0>; | |
| }; | |
| vcc3v3 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vcc3v3"; | |
| regulator-min-microvolt = <0x325aa0>; | |
| regulator-max-microvolt = <0x325aa0>; | |
| }; | |
| vcc5v0 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vcc5v0"; | |
| regulator-min-microvolt = <0x4c4b40>; | |
| regulator-max-microvolt = <0x4c4b40>; | |
| linux,phandle = <0x22>; | |
| phandle = <0x22>; | |
| }; | |
| leds { | |
| compatible = "gpio-leds"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x36>; | |
| led1 { | |
| label = "led1"; | |
| gpio = <0x7 0x1 0x7 0x1>; | |
| }; | |
| }; | |
| wifi_pwrseq { | |
| compatible = "mmc-pwrseq-simple"; | |
| reset-gpios = <0xf 0x0 0x6 0x1>; | |
| linux,phandle = <0xb>; | |
| phandle = <0xb>; | |
| }; | |
| backlight { | |
| compatible = "ocp8178-backlight"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x37>; | |
| backlight-control-gpios = <0x7 0x7 0x1 0x0>; | |
| default-brightness = <0x5>; | |
| }; | |
| }; |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment