preonic flash output

flashing.md

    *** QMK Toolbox (http://qmk.fm/toolbox)
        Supporting following bootloaders:
         - DFU (Atmel, LUFA) via dfu-programmer (http://dfu-programmer.github.io/)
         - Caterina (Arduino, Pro Micro) via avrdude (http://nongnu.org/avrdude/)
         - Halfkay (Teensy, Ergodox EZ) via teensy_loader_cli (https://pjrc.com/teensy/loader_cli.html)
         - STM32 (ARM) via dfu-util (http://dfu-util.sourceforge.net/)
         - Kiibohd (ARM) via dfu-util (http://dfu-util.sourceforge.net/)
    *** DFU device connected
    *** Attempting to flash, please don't remove device
    >>> dfu-programmer atmega32u4 erase --force
        Erasing flash...  Success
        Checking memory from 0x0 to 0x6FFF...  Empty.
    >>> dfu-programmer atmega32u4 flash /Users/cdean/dev/foss/qmk_firmware/preonic_rev2_cpdean.hex
        Checking memory from 0x0 to 0x6F7F...  Empty.
        0%                            100%  Programming 0x6F80 bytes...
        [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>]  Success
        0%                            100%  Reading 0x7000 bytes...
        [>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>]  Success
        Validating...  Success
        0x6F80 bytes written into 0x7000 bytes memory (99.55%).
    >>> dfu-programmer atmega32u4 reset
        
    *** DFU device disconnected
    *** OLKB - Preonic connected -- 0xFEED:0x6061