wget https://storage.googleapis.com/golang/go1.7.linux-armv6l.tar.gz
tar -C /usr/local -xzf go1.7.linux-armv6l.tar.gz
export PATH=$PATH:/usr/local/go/bin
Trying to run iTunes with Wine, i faced various problems. Here is a working solution how to install iTunes on Debian-based systems (in my case Linux Mint 18.1) - with support for the iTunes Store. Warning: Syncing i-devices is still not possible. | |
When installing it with the playonlinux-"iTunes 12"-script, log in into the Store was not possible in my case. Wine showed the follwing error when trying to log in: SecurityContext failed with error 0x80090304 | |
1. Install current Wine version (2.0.1) directly from the winehq repository | |
wget -nc https://dl.winehq.org/wine-builds/Release.key | |
sudo apt-key add Release.key | |
sudo apt-add-repository 'deb https://dl.winehq.org/wine-builds/ubuntu/ xenial main' | |
sudo apt-get update | |
sudo apt-get install --install-recommends winehq-stable | |
wine --version |
import os | |
import struct | |
import marshal | |
import zlib | |
import sys | |
import imp | |
import types | |
class CTOCEntry: | |
def __init__(self, position, cmprsdDataSize, uncmprsdDataSize, cmprsFlag, typeCmprsData, name): |
## Instructions to switch odroid over to external ssd | |
# You shouldn’t see any errors when running this process, if you do. Stop immediately and ask me. | |
# run lsblk to see all the hard drives. You should see a line starting with mmcblk0 and then 2 more underneath it with | |
# mmcblk0p1 and mmcblk0p2. That’s the sd card disk and the sd card partitions. You’ll also see a line starting with | |
# sda (and/or sdb if there are two usb drives). We want to use the sd* one. | |
lsblk | |
#pull out some of the values from lsblk so we can automate the rest of the script | |
read new_partition new_drive mountpoint <<< `lsblk -e 179 -l -o NAME,PKNAME,FSTYPE,MOUNTPOINT |grep 'vfat\s*/media/odroid' | awk {'print $1" "$2" "$4'}` |
More details - http://blog.gbaman.info/?p=791
For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt
file dtoverlay=dwc2
on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh
in the SD card as well. By default SSH i
Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).
The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int
#!/usr/bin/env python | |
# -*- coding: utf-8 -*- | |
''' | |
Inspired by: | |
* http://weeklybuild.com/2014/07/07/mjpeg-bottle-gstreamer/ | |
* http://www.ridgesolutions.ie/index.php/2014/11/24/streaming-mjpeg-video-with-web2py-and-python/ | |
* https://gist.github.com/n3wtron/4624820 | |
''' |
// | |
// RSASHA1.swift | |
// | |
// Copyright (c) 2015 Neil Cowburn. All rights reserved. | |
// | |
// Permission is hereby granted, free of charge, to any person obtaining a copy | |
// of this software and associated documentation files (the "Software"), to deal | |
// in the Software without restriction, including without limitation the rights | |
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell | |
// copies of the Software, and to permit persons to whom the Software is |
I assume you already have Docker up and running on your Raspberry Pi 2. If not, see this article.
The next natural step is to install Docker Compose (formerly Fig), but there's no ARM support out of the box. This recipe will help you install Docker Compose on your Raspberry Pi 2!
The following six steps will do the trick:
- Get the docker-compose source code from git
# In this example we're sending some test bitcoins from an address we control to a brand new test | |
# address. We'll be sending the coins using the following address, public and private keys (please | |
# don't abuse). | |
# address : mtWg6ccLiZWw2Et7E5UqmHsYgrAi5wqiov | |
# public : 03bb318b00de944086fad67ab78a832eb1bf26916053ecd3b14a3f48f9fbe0821f | |
# private : 1af97b1f428ac89b7d35323ea7a68aba8cad178a04eddbbf591f65671bae48a2 | |
# 1. generate a one-shot dummy address we're going to send money to | |
$ curl -X POST http://api.blockcypher.com/v1/btc/test3/addrs | |
{ |