cripto101
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /** | |
| * ************** How to use this firmware - READ THIS, yes actually read this. ********************************* | |
| * | |
| * Uncomment means removing the 2 // in front of #define. | |
| * | |
| * FLASHING NOTES: | |
| * ALL slicers (Simplify3D, Cura, Slic3r, etc) or anything else that connects to the COM port must be CLOSED for the firmware to be flash. | |
| * If anything is connected to the COM port when flashing it will fail, typically "access denied" is listed in the error section of the Arduino IDE. | |
| * You MUST use the Included Arduino IDE to flash the firmware if on Windows and if you are on a Mac or Linux follow the guide in our knowledgebase to setup your IDE to work with the firmware. | |
| * |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /** | |
| * Marlin 3D Printer Firmware | |
| * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] | |
| * | |
| * Based on Sprinter and grbl. | |
| * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm | |
| * | |
| * This program is free software: you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation, either version 3 of the License, or |