brcmfmac43602-pcie.txt

brcmfmac43602-pcie.txt

boardrev=0x1101

sromrev=11
boardtype=0x073e
vendid=0x14e4
devid=0x43ba

macaddr=00:90:4c:0d:f4:3e

ccode=0
regrev=1


# Board flags:
# X BFL_BTCOEXIST          = 0x00000001   This board implements Bluetooth coexistence
#   BFL_EXTLNA             = 0x00001000   This board has an external LNA (2G)
#   BFL_FEM_BT             = 0x00400000   This board has shared antenna w/ BT
# X BFL_PALDO              = 0x02000000   Power topology uses PALDO ? - CHECK
#   BFL_EXTLNA_5GHz        = 0x10000000   Board has an external LNA in 5GHz band
boardflags=0x02000001

# Board flags 2:
#   BFL2_BT_SHARE_ANT0     = 0x00800000   share core0 antenna with BT
# X BFL2_LNA1BYPFORTR2G    = 0x40000000   acphy, enable lna1 bypass for 2G clip lo
# X BFL2_LNA1BYPFORTR5G    = 0x80000000   acphy, enable lna1 bypass for 5G clip lo
# X BFL2_SPUR_WAR          = 0x00000200   Board has a WAR for clock-harmonic spurs
#   BFL2_2G_SPUR_WAR       = 0x00002000   Board has a WAR to reduce and avoid clock-harmonic spurs in 2G band
boardflags2=0xC0000000

# Board flags 3:
# X BFL3_RCAL_WAR          = 0x00000008   acphy rcal war active on this board (mainly for 4335a0)
# X BFL3_FEMTBL_FROM_NVRAM = 0x00000100   acphy, femctrl table is read from nvram
boardflags3=0x40000108

#btc_mode=0

#### added rx de-sense

btcdyn_flags=0x7
# Media profile
btcdyn_profile_type=0x2  
btcdyn_dflt_dsns_level=0
btcdyn_low_dsns_level=0
btcdyn_mid_dsns_level=21
btcdyn_high_dsns_level=22
btcdyn_default_btc_mode=4
# --- number of rows in the array vars below ---
btcdyn_msw_rows=1
btcdyn_dsns_rows=1
# --- mode switch data rows (max is 4) ---
btcdyn_msw_row0=1,-16,-95,-100
# --- desense switching data rows (max is 4) ---
btcdyn_dsns_row0=4,-16,-63,-95

#### end of rx de-sense


xtalfreq=40000
otpimagesize=484
nocrc=1
muxenab=0x1
btc_params82=0x60



########################################################
# RF Control Definitions

antswitch=0
rxchain=3
txchain=3
aa2g=3
aa5g=3
femctrl=10

# antenna gain per core g-band
agbg0=2
agbg1=2

# antenna gain per core a-band
aga0=2
aga1=2

# RFSWCTRL 2G and 5G iLNA
#            WL_TX,     WL_RX,     WL_RX_ATTN, BT_TX_RX, WL_MASK
swctrlmap_2g=0x04010401,0x08080808,0x04010401,0x00000000,0x000000ff
swctrlmap_5g=0x08080808,0x04010401,0x08080808,0x00000000,0x000000ff

swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x003
swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x003
########################################################

# Bypass offsetting PAPD_EPS_TABLE_PER_TX_INDEX feature
epsdelta2g0=0,-1,0,0,0,0,0,0
epsdelta2g1=0,-1,0,0,0,0,0,0

########################################################
# Rx gain and RSSI parameters
#
# Default so do not set:
# rxgaincal_rssical=0
# rssi_cal_rev=0
# rxgains[25]gtrisoa[01]
# rxgains[25]g[mh]trelnabypa[01]=0

# BW20,BW40
rssicorrnorm_c0=4,4
rssicorrnorm_c1=4,4

# subband5gver=4 =>
# BW20,BW40,BW80  <5250|<5500|<5745|>=5745
#                  <70m| <100| <149|>=149
rssicorrnorm5g_c0=1,2,3,1,2,3,1,2,3,1,2,3
rssicorrnorm5g_c1=1,2,3,1,2,3,1,2,3,1,2,3

########################################################


########################################################
# 20 MHz in 40 MHz Power Offsets and Duplicate Modes
# 2G and 5G bands

sb20in40hrpo=0x0
sb20in40lrpo=0x0

dot11agduphrpo=0x0
dot11agduplrpo=0x0
########################################################


########################################################
# PAPD parameters
fastpapdgainctrl=0

########################################################
# 2G TSSI / PA Parameters

tworangetssi2g=1
tssipos2g=1
extpagain2g=2
pdgain2g=2

# 2G Max Power
maxp2ga0=74
maxp2ga1=74

# 2G PA Parameters
# Order is A1,B0,B1
#pa2ga0=-125,6514,-739  used for p113 and p115
#pa2ga1=-141,6391,-738  used for p113 and p115
#pa2ga0=-169,6473,-759
#pa2ga1=-174,6462,-759
pa2ga0=-162,6368,-735
pa2ga1=-170,6349,-742



# 2G Power Offsets
cckbw202gpo=0x0000
cckbw20ul2gpo=0x0000
mcsbw202gpo=0x99644422
mcsbw402gpo=0x99644422
dot11agofdmhrbw202gpo=0x6666
ofdmlrbw202gpo=0x0022

########################################################

#AvVmid_c0=2,140,2,145,2,145,2,145,2,145
#AvVmid_c1=2,140,2,145,2,145,2,145,2,145
#AvVmid_c2=0,0,0,0,0,0,0,0,0,0

# AvVmid 2GHz and 5GHz LabNotebook 43569A2_012 data from pcieir
AvVmid_c0=2,140,2,125,2,125,2,135,2,135
AvVmid_c1=2,140,3,100,3,100,3,100,3,100
AvVmid_c2=0,0,0,0,0,0,0,0,0,0

########################################################
# 5G TSSI / PA Parameters

tworangetssi5g=0
tssipos5g=1
extpagain5g=2
subband5gver=0x4
pdgain5g=2

# 5G Max Powers
maxp5ga0=74,74,74,74
maxp5ga1=74,74,74,74

# 5G PA Parameters initial
#pa5ga0=152,5462,658,150,5547,663,150,5950,697,170,5782,688
#pa5ga1=177,5661,685,178,5712,691,166,6161,725,195,5811,706

# 5G PA Parameters *** from LabNotebook 43569A0_099 TSSI opt for 8::18:
#pa5ga0=-181,5835,-709,-183,5842,-712,-186,5832,-710,-187,5744,-703
#pa5ga1=-198,5767,-710,-190,5915,-721,-185,6067,-732,-186,6024,-731

# Updated with LabNotebook 43569A2_012
pa5ga0=-194,5833,-713,-186,6042,-730,-181,5927,-714,-197,5562,-687
pa5ga1=-186,6139,-737,-196,5988,-726,-203,5852,-713,-204,5836,-713



# 5G Power Offsets
mcsbw205glpo=0x88766663
mcsbw405glpo=0x88666663
mcsbw805glpo=0xbb666665
mcsbw205gmpo=0xd8666663
mcsbw405gmpo=0x88666663
mcsbw805gmpo=0xcc666665
mcsbw205ghpo=0xdc666663
mcsbw405ghpo=0xaa666663
mcsbw805ghpo=0xdd666665
mcslr5glpo=0x0000
mcslr5gmpo=0x0000
mcslr5ghpo=0x0000
sb20in40hrpo=0x0
sb20in80and160hr5glpo=0x0
sb40and80hr5glpo=0x0
sb20in80and160hr5gmpo=0x0
sb40and80hr5gmpo=0x0
sb20in80and160hr5ghpo=0x0
sb40and80hr5ghpo=0x0
sb20in40lrpo=0x0
sb20in80and160lr5glpo=0x0
sb40and80lr5glpo=0x0
sb20in80and160lr5gmpo=0x0
sb40and80lr5gmpo=0x0
sb20in80and160lr5ghpo=0x0
sb40and80lr5ghpo=0x0

pdoffset40ma0=0x0000
pdoffset80ma0=0x0000
pdoffset40ma1=0x0000
pdoffset80ma1=0x0000

########################################################


########################################################
# Temperature Values

tempthresh=120
tempoffset=255
rawtempsense=0x1ff

phycal_tempdelta=255
temps_period=15
temps_hysteresis=15

########################################################

This file saves my life. I've been having problems with choppy Bluetooth audio, unable to pair my mouse with my Macbook running Linux Mint.
All is solved with this file. Can't thank you enough for this.
Can I copy your file and store it as a backup just in case?

Hey, I'm glad it helps. Sure! You can copy, modify it or whatever you need ✌🏼

Thank you, I hope this works for the bluetooth problems.