Apache 403 Forbidden after uninstalling built-in Apache and re-installing Apache with Homebrew

apachectl

apachectl -S
VirtualHost configuration:
*:8443                 crmpicco.localhost (/usr/local/etc/httpd/extra/httpd-ssl.conf:121)
ServerRoot: "/usr/local/opt/httpd"
Main DocumentRoot: "/usr/local/var/www"
Main ErrorLog: "/usr/local/var/log/httpd/error_log"
Mutex default: dir="/usr/local/var/run/httpd/" mechanism=default 
Mutex mpm-accept: using_defaults
Mutex rewrite-map: using_defaults
Mutex ssl-stapling-refresh: using_defaults
Mutex ssl-stapling: using_defaults
Mutex ssl-cache: using_defaults
PidFile: "/usr/local/var/run/httpd/httpd.pid"
Define: DUMP_VHOSTS
Define: DUMP_RUN_CFG
User: name="_www" id=70 not_used
Group: name="_www" id=70 not_used

etc hosts

cat /etc/hosts
##
# Host Database
#
# localhost is used to configure the loopback interface
# when the system is booting.  Do not change this entry.
##
127.0.0.1	localhost
255.255.255.255	broadcasthost
::1             localhost
127.0.0.1       CRMPiccos-MacBook.local
127.0.0.1       crmpicco.localhost

httpd-ssl.conf

/usr/local/etc/httpd/extra/httpd-ssl.conf

#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailed information about these 
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
# 
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
#          socache_shmcb_module (for default value of SSLSessionCache)

#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
#SSLRandomSeed startup file:/dev/random  512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random  512
#SSLRandomSeed connect file:/dev/urandom 512


#
# When we also provide SSL we have to listen to the 
# standard HTTP port (see above) and to the HTTPS port
#
Listen 8443

##
##  SSL Global Context
##
##  All SSL configuration in this context applies both to
##  the main server and all SSL-enabled virtual hosts.
##

#   SSL Cipher Suite:
#   List the ciphers that the client is permitted to negotiate,
#   and that httpd will negotiate as the client of a proxied server.
#   See the OpenSSL documentation for a complete list of ciphers, and
#   ensure these follow appropriate best practices for this deployment.
#   httpd 2.2.30, 2.4.13 and later force-disable aNULL, eNULL and EXP ciphers,
#   while OpenSSL disabled these by default in 0.9.8zf/1.0.0r/1.0.1m/1.0.2a.
SSLCipherSuite HIGH:MEDIUM:!MD5:!RC4:!3DES
SSLProxyCipherSuite HIGH:MEDIUM:!MD5:!RC4:!3DES

#  By the end of 2016, only TLSv1.2 ciphers should remain in use.
#  Older ciphers should be disallowed as soon as possible, while the
#  kRSA ciphers do not offer forward secrecy.  These changes inhibit
#  older clients (such as IE6 SP2 or IE8 on Windows XP, or other legacy
#  non-browser tooling) from successfully connecting.  
#
#  To restrict mod_ssl to use only TLSv1.2 ciphers, and disable
#  those protocols which do not support forward secrecy, replace
#  the SSLCipherSuite and SSLProxyCipherSuite directives above with
#  the following two directives, as soon as practical.
# SSLCipherSuite HIGH:MEDIUM:!SSLv3:!kRSA
# SSLProxyCipherSuite HIGH:MEDIUM:!SSLv3:!kRSA

#   User agents such as web browsers are not configured for the user's
#   own preference of either security or performance, therefore this
#   must be the prerogative of the web server administrator who manages
#   cpu load versus confidentiality, so enforce the server's cipher order.
SSLHonorCipherOrder on 

#   SSL Protocol support:
#   List the protocol versions which clients are allowed to connect with.
#   Disable SSLv3 by default (cf. RFC 7525 3.1.1).  TLSv1 (1.0) should be
#   disabled as quickly as practical.  By the end of 2016, only the TLSv1.2
#   protocol or later should remain in use.
SSLProtocol all -SSLv3
SSLProxyProtocol all -SSLv3

#   Pass Phrase Dialog:
#   Configure the pass phrase gathering process.
#   The filtering dialog program (`builtin' is an internal
#   terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog  builtin

#   Inter-Process Session Cache:
#   Configure the SSL Session Cache: First the mechanism 
#   to use and second the expiring timeout (in seconds).
#SSLSessionCache         "dbm:/usr/local/var/run/httpd/ssl_scache"
SSLSessionCache        "shmcb:/usr/local/var/run/httpd/ssl_scache(512000)"
SSLSessionCacheTimeout  300

#   OCSP Stapling (requires OpenSSL 0.9.8h or later)
#
#   This feature is disabled by default and requires at least
#   the two directives SSLUseStapling and SSLStaplingCache.
#   Refer to the documentation on OCSP Stapling in the SSL/TLS
#   How-To for more information.
#
#   Enable stapling for all SSL-enabled servers:
#SSLUseStapling On

#   Define a relatively small cache for OCSP Stapling using
#   the same mechanism that is used for the SSL session cache
#   above.  If stapling is used with more than a few certificates,
#   the size may need to be increased.  (AH01929 will be logged.)
#SSLStaplingCache "shmcb:/usr/local/var/run/httpd/ssl_stapling(32768)"

#   Seconds before valid OCSP responses are expired from the cache
#SSLStaplingStandardCacheTimeout 3600

#   Seconds before invalid OCSP responses are expired from the cache
#SSLStaplingErrorCacheTimeout 600

##
## SSL Virtual Host Context
##

<VirtualHost _default_:8443>

#   General setup for the virtual host
DocumentRoot "/var/www/crmpicco"
Alias /app "/var/www/crmpicco/symfony/web"
Alias / "/var/www/crmpicco/wordpress"
ServerName crmpicco.localhost:8443
ServerAdmin craig@crmpicco.com
ErrorLog "/usr/local/var/log/httpd/error_log"
TransferLog "/usr/local/var/log/httpd/access_log"

<Directory />
    Options FollowSymLinks
    AllowOverride all
    Require all granted
</Directory>

#   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
SSLEngine on

#   Server Certificate:
#   Point SSLCertificateFile at a PEM encoded certificate.  If
#   the certificate is encrypted, then you will be prompted for a
#   pass phrase.  Note that a kill -HUP will prompt again.  Keep
#   in mind that if you have both an RSA and a DSA certificate you
#   can configure both in parallel (to also allow the use of DSA
#   ciphers, etc.)
#   Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
#   require an ECC certificate which can also be configured in
#   parallel.
SSLCertificateFile "/private/etc/apache2/extra/server.crt"
#SSLCertificateFile "/usr/local/etc/httpd/server.crt"
#SSLCertificateFile "/usr/local/etc/httpd/server-dsa.crt"
#SSLCertificateFile "/usr/local/etc/httpd/server-ecc.crt"

#   Server Private Key:
#   If the key is not combined with the certificate, use this
#   directive to point at the key file.  Keep in mind that if
#   you've both a RSA and a DSA private key you can configure
#   both in parallel (to also allow the use of DSA ciphers, etc.)
#   ECC keys, when in use, can also be configured in parallel
SSLCertificateKeyFile "/private/etc/apache2/extra/server.key"
#SSLCertificateKeyFile "/usr/local/etc/httpd/server.key"
#SSLCertificateKeyFile "/usr/local/etc/httpd/server-dsa.key"
#SSLCertificateKeyFile "/usr/local/etc/httpd/server-ecc.key"

#   Server Certificate Chain:
#   Point SSLCertificateChainFile at a file containing the
#   concatenation of PEM encoded CA certificates which form the
#   certificate chain for the server certificate. Alternatively
#   the referenced file can be the same as SSLCertificateFile
#   when the CA certificates are directly appended to the server
#   certificate for convenience.
#SSLCertificateChainFile "/usr/local/etc/httpd/server-ca.crt"

#   Certificate Authority (CA):
#   Set the CA certificate verification path where to find CA
#   certificates for client authentication or alternatively one
#   huge file containing all of them (file must be PEM encoded)
#   Note: Inside SSLCACertificatePath you need hash symlinks
#         to point to the certificate files. Use the provided
#         Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/usr/local/etc/httpd/ssl.crt"
#SSLCACertificateFile "/usr/local/etc/httpd/ssl.crt/ca-bundle.crt"

#   Certificate Revocation Lists (CRL):
#   Set the CA revocation path where to find CA CRLs for client
#   authentication or alternatively one huge file containing all
#   of them (file must be PEM encoded).
#   The CRL checking mode needs to be configured explicitly
#   through SSLCARevocationCheck (defaults to "none" otherwise).
#   Note: Inside SSLCARevocationPath you need hash symlinks
#         to point to the certificate files. Use the provided
#         Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/usr/local/etc/httpd/ssl.crl"
#SSLCARevocationFile "/usr/local/etc/httpd/ssl.crl/ca-bundle.crl"
#SSLCARevocationCheck chain

#   Client Authentication (Type):
#   Client certificate verification type and depth.  Types are
#   none, optional, require and optional_no_ca.  Depth is a
#   number which specifies how deeply to verify the certificate
#   issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth  10

#   TLS-SRP mutual authentication:
#   Enable TLS-SRP and set the path to the OpenSSL SRP verifier
#   file (containing login information for SRP user accounts). 
#   Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
#   detailed instructions on creating this file. Example:
#   "openssl srp -srpvfile /usr/local/etc/httpd/passwd.srpv -add username"
#SSLSRPVerifierFile "/usr/local/etc/httpd/passwd.srpv"

#   Access Control:
#   With SSLRequire you can do per-directory access control based
#   on arbitrary complex boolean expressions containing server
#   variable checks and other lookup directives.  The syntax is a
#   mixture between C and Perl.  See the mod_ssl documentation
#   for more details.
#<Location />
#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

#   SSL Engine Options:
#   Set various options for the SSL engine.
#   o FakeBasicAuth:
#     Translate the client X.509 into a Basic Authorisation.  This means that
#     the standard Auth/DBMAuth methods can be used for access control.  The
#     user name is the `one line' version of the client's X.509 certificate.
#     Note that no password is obtained from the user. Every entry in the user
#     file needs this password: `xxj31ZMTZzkVA'.
#   o ExportCertData:
#     This exports two additional environment variables: SSL_CLIENT_CERT and
#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#     server (always existing) and the client (only existing when client
#     authentication is used). This can be used to import the certificates
#     into CGI scripts.
#   o StdEnvVars:
#     This exports the standard SSL/TLS related `SSL_*' environment variables.
#     Per default this exportation is switched off for performance reasons,
#     because the extraction step is an expensive operation and is usually
#     useless for serving static content. So one usually enables the
#     exportation for CGI and SSI requests only.
#   o StrictRequire:
#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
#     under a "Satisfy any" situation, i.e. when it applies access is denied
#     and no other module can change it.
#   o OptRenegotiate:
#     This enables optimized SSL connection renegotiation handling when SSL
#     directives are used in per-directory context. 
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
    SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/usr/local/var/www/cgi-bin">
    SSLOptions +StdEnvVars
</Directory>

#   SSL Protocol Adjustments:
#   The safe and default but still SSL/TLS standard compliant shutdown
#   approach is that mod_ssl sends the close notify alert but doesn't wait for
#   the close notify alert from client. When you need a different shutdown
#   approach you can use one of the following variables:
#   o ssl-unclean-shutdown:
#     This forces an unclean shutdown when the connection is closed, i.e. no
#     SSL close notify alert is sent or allowed to be received.  This violates
#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
#     this when you receive I/O errors because of the standard approach where
#     mod_ssl sends the close notify alert.
#   o ssl-accurate-shutdown:
#     This forces an accurate shutdown when the connection is closed, i.e. a
#     SSL close notify alert is send and mod_ssl waits for the close notify
#     alert of the client. This is 100% SSL/TLS standard compliant, but in
#     practice often causes hanging connections with brain-dead browsers. Use
#     this only for browsers where you know that their SSL implementation
#     works correctly. 
#   Notice: Most problems of broken clients are also related to the HTTP
#   keep-alive facility, so you usually additionally want to disable
#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
#   "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
         nokeepalive ssl-unclean-shutdown \
         downgrade-1.0 force-response-1.0

#   Per-Server Logging:
#   The home of a custom SSL log file. Use this when you want a
#   compact non-error SSL logfile on a virtual host basis.
CustomLog "/usr/local/var/log/httpd/ssl_request_log" \
          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost> 

httpd.conf

/usr/local/etc/httpd/httpd.conf
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
# will be interpreted as '/logs/access_log'.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/usr/local/opt/httpd"

#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:/usr/local/var/run/httpd

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
#LoadModule mpm_event_module lib/httpd/modules/mod_mpm_event.so
LoadModule mpm_prefork_module lib/httpd/modules/mod_mpm_prefork.so
#LoadModule mpm_worker_module lib/httpd/modules/mod_mpm_worker.so
LoadModule authn_file_module lib/httpd/modules/mod_authn_file.so
#LoadModule authn_dbm_module lib/httpd/modules/mod_authn_dbm.so
#LoadModule authn_anon_module lib/httpd/modules/mod_authn_anon.so
#LoadModule authn_dbd_module lib/httpd/modules/mod_authn_dbd.so
#LoadModule authn_socache_module lib/httpd/modules/mod_authn_socache.so
LoadModule authn_core_module lib/httpd/modules/mod_authn_core.so
LoadModule authz_host_module lib/httpd/modules/mod_authz_host.so
LoadModule authz_groupfile_module lib/httpd/modules/mod_authz_groupfile.so
LoadModule authz_user_module lib/httpd/modules/mod_authz_user.so
#LoadModule authz_dbm_module lib/httpd/modules/mod_authz_dbm.so
#LoadModule authz_owner_module lib/httpd/modules/mod_authz_owner.so
#LoadModule authz_dbd_module lib/httpd/modules/mod_authz_dbd.so
LoadModule authz_core_module lib/httpd/modules/mod_authz_core.so
#LoadModule authnz_fcgi_module lib/httpd/modules/mod_authnz_fcgi.so
LoadModule access_compat_module lib/httpd/modules/mod_access_compat.so
LoadModule auth_basic_module lib/httpd/modules/mod_auth_basic.so
#LoadModule auth_form_module lib/httpd/modules/mod_auth_form.so
#LoadModule auth_digest_module lib/httpd/modules/mod_auth_digest.so
#LoadModule allowmethods_module lib/httpd/modules/mod_allowmethods.so
#LoadModule file_cache_module lib/httpd/modules/mod_file_cache.so
#LoadModule cache_module lib/httpd/modules/mod_cache.so
#LoadModule cache_disk_module lib/httpd/modules/mod_cache_disk.so
#LoadModule cache_socache_module lib/httpd/modules/mod_cache_socache.so
LoadModule socache_shmcb_module lib/httpd/modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module lib/httpd/modules/mod_socache_dbm.so
#LoadModule socache_memcache_module lib/httpd/modules/mod_socache_memcache.so
#LoadModule watchdog_module lib/httpd/modules/mod_watchdog.so
#LoadModule macro_module lib/httpd/modules/mod_macro.so
#LoadModule dbd_module lib/httpd/modules/mod_dbd.so
#LoadModule dumpio_module lib/httpd/modules/mod_dumpio.so
#LoadModule echo_module lib/httpd/modules/mod_echo.so
#LoadModule buffer_module lib/httpd/modules/mod_buffer.so
#LoadModule data_module lib/httpd/modules/mod_data.so
#LoadModule ratelimit_module lib/httpd/modules/mod_ratelimit.so
LoadModule reqtimeout_module lib/httpd/modules/mod_reqtimeout.so
#LoadModule ext_filter_module lib/httpd/modules/mod_ext_filter.so
#LoadModule request_module lib/httpd/modules/mod_request.so
#LoadModule include_module lib/httpd/modules/mod_include.so
LoadModule filter_module lib/httpd/modules/mod_filter.so
#LoadModule reflector_module lib/httpd/modules/mod_reflector.so
#LoadModule substitute_module lib/httpd/modules/mod_substitute.so
#LoadModule sed_module lib/httpd/modules/mod_sed.so
#LoadModule charset_lite_module lib/httpd/modules/mod_charset_lite.so
#LoadModule deflate_module lib/httpd/modules/mod_deflate.so
#LoadModule xml2enc_module lib/httpd/modules/mod_xml2enc.so
#LoadModule proxy_html_module lib/httpd/modules/mod_proxy_html.so
#LoadModule brotli_module lib/httpd/modules/mod_brotli.so
LoadModule mime_module lib/httpd/modules/mod_mime.so
LoadModule log_config_module lib/httpd/modules/mod_log_config.so
#LoadModule log_debug_module lib/httpd/modules/mod_log_debug.so
#LoadModule log_forensic_module lib/httpd/modules/mod_log_forensic.so
#LoadModule logio_module lib/httpd/modules/mod_logio.so
LoadModule env_module lib/httpd/modules/mod_env.so
#LoadModule mime_magic_module lib/httpd/modules/mod_mime_magic.so
#LoadModule expires_module lib/httpd/modules/mod_expires.so
LoadModule headers_module lib/httpd/modules/mod_headers.so
#LoadModule usertrack_module lib/httpd/modules/mod_usertrack.so
#LoadModule unique_id_module lib/httpd/modules/mod_unique_id.so
LoadModule setenvif_module lib/httpd/modules/mod_setenvif.so
LoadModule version_module lib/httpd/modules/mod_version.so
#LoadModule remoteip_module lib/httpd/modules/mod_remoteip.so
#LoadModule proxy_module lib/httpd/modules/mod_proxy.so
#LoadModule proxy_connect_module lib/httpd/modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module lib/httpd/modules/mod_proxy_ftp.so
#LoadModule proxy_http_module lib/httpd/modules/mod_proxy_http.so
#LoadModule proxy_fcgi_module lib/httpd/modules/mod_proxy_fcgi.so
#LoadModule proxy_scgi_module lib/httpd/modules/mod_proxy_scgi.so
#LoadModule proxy_uwsgi_module lib/httpd/modules/mod_proxy_uwsgi.so
#LoadModule proxy_fdpass_module lib/httpd/modules/mod_proxy_fdpass.so
#LoadModule proxy_wstunnel_module lib/httpd/modules/mod_proxy_wstunnel.so
#LoadModule proxy_ajp_module lib/httpd/modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module lib/httpd/modules/mod_proxy_balancer.so
#LoadModule proxy_express_module lib/httpd/modules/mod_proxy_express.so
#LoadModule proxy_hcheck_module lib/httpd/modules/mod_proxy_hcheck.so
#LoadModule session_module lib/httpd/modules/mod_session.so
#LoadModule session_cookie_module lib/httpd/modules/mod_session_cookie.so
#LoadModule session_crypto_module lib/httpd/modules/mod_session_crypto.so
#LoadModule session_dbd_module lib/httpd/modules/mod_session_dbd.so
#LoadModule slotmem_shm_module lib/httpd/modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module lib/httpd/modules/mod_slotmem_plain.so
LoadModule ssl_module lib/httpd/modules/mod_ssl.so
#LoadModule dialup_module lib/httpd/modules/mod_dialup.so
#LoadModule http2_module lib/httpd/modules/mod_http2.so
#LoadModule md_module lib/httpd/modules/mod_md.so
#LoadModule lbmethod_byrequests_module lib/httpd/modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module lib/httpd/modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_bybusyness_module lib/httpd/modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module lib/httpd/modules/mod_lbmethod_heartbeat.so
LoadModule unixd_module lib/httpd/modules/mod_unixd.so
#LoadModule heartbeat_module lib/httpd/modules/mod_heartbeat.so
#LoadModule heartmonitor_module lib/httpd/modules/mod_heartmonitor.so
#LoadModule dav_module lib/httpd/modules/mod_dav.so
LoadModule status_module lib/httpd/modules/mod_status.so
LoadModule autoindex_module lib/httpd/modules/mod_autoindex.so
#LoadModule asis_module lib/httpd/modules/mod_asis.so
#LoadModule info_module lib/httpd/modules/mod_info.so
#LoadModule suexec_module lib/httpd/modules/mod_suexec.so
<IfModule !mpm_prefork_module>
	#LoadModule cgid_module lib/httpd/modules/mod_cgid.so
</IfModule>
<IfModule mpm_prefork_module>
	#LoadModule cgi_module lib/httpd/modules/mod_cgi.so
</IfModule>
#LoadModule dav_fs_module lib/httpd/modules/mod_dav_fs.so
#LoadModule dav_lock_module lib/httpd/modules/mod_dav_lock.so
#LoadModule vhost_alias_module lib/httpd/modules/mod_vhost_alias.so
#LoadModule negotiation_module lib/httpd/modules/mod_negotiation.so
LoadModule dir_module lib/httpd/modules/mod_dir.so
#LoadModule actions_module lib/httpd/modules/mod_actions.so
#LoadModule speling_module lib/httpd/modules/mod_speling.so
#LoadModule userdir_module lib/httpd/modules/mod_userdir.so
LoadModule alias_module lib/httpd/modules/mod_alias.so
LoadModule rewrite_module lib/httpd/modules/mod_rewrite.so

<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User _www
Group _www

</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:8080
#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# <Directory> blocks below.
#
<Directory />
    AllowOverride none
    Require all denied
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/usr/local/var/www"
<Directory "/usr/local/var/www">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    #
    AllowOverride all

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ".ht*">
    Require all denied
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "/usr/local/var/log/httpd/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "/usr/local/var/log/httpd/access_log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "/usr/local/var/log/httpd/access_log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/usr/local/var/www/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock cgisock
</IfModule>

#
# "/usr/local/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/usr/local/var/www/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
</Directory>

<IfModule headers_module>
    #
    # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
    # backend servers which have lingering "httpoxy" defects.
    # 'Proxy' request header is undefined by the IETF, not listed by IANA
    #
    RequestHeader unset Proxy early
</IfModule>

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /usr/local/etc/httpd/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile /usr/local/etc/httpd/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile on

# Supplemental configuration
#
# The configuration files in the /usr/local/etc/httpd/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
#Include /usr/local/etc/httpd/extra/httpd-mpm.conf

# Multi-language error messages
#Include /usr/local/etc/httpd/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include /usr/local/etc/httpd/extra/httpd-autoindex.conf

# Language settings
#Include /usr/local/etc/httpd/extra/httpd-languages.conf

# User home directories
#Include /usr/local/etc/httpd/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include /usr/local/etc/httpd/extra/httpd-info.conf

# Virtual hosts
Include /usr/local/etc/httpd/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include /usr/local/etc/httpd/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include /usr/local/etc/httpd/extra/httpd-dav.conf

# Various default settings
#Include /usr/local/etc/httpd/extra/httpd-default.conf

# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include /usr/local/etc/httpd/extra/proxy-html.conf
</IfModule>

# Secure (SSL/TLS) connections
Include /usr/local/etc/httpd/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

Permissions

ps aux | grep httpd
_www             60997   0.0  0.0  4300784    476   ??  S     4:49pm   0:00.00 /usr/local/opt/httpd/bin/httpd -k start
_www             60996   0.0  0.0  4300784    456   ??  S     4:49pm   0:00.00 /usr/local/opt/httpd/bin/httpd -k start
_www             60995   0.0  0.0  4300784    456   ??  S     4:49pm   0:00.00 /usr/local/opt/httpd/bin/httpd -k start
_www             60994   0.0  0.0  4300784    456   ??  S     4:49pm   0:00.00 /usr/local/opt/httpd/bin/httpd -k start
root             26130   0.0  0.0  4300808   2032   ??  Ss    2:08pm   0:00.77 /usr/local/opt/httpd/bin/httpd -k start
crmpicco         76683   0.0  0.0  4268040    788 s001  S+    5:00pm   0:00.00 grep httpd
_www             60998   0.0  0.0  4300784    456   ??  S     4:49pm   0:00.00 /usr/local/opt/httpd/bin/httpd -k start


pwd
/var/www
CraigRMsMacBook:www crmpicco$ ll
total 16
drwxrwxrwx  5 root      wheel   160 20 Aug 16:39 cache
drwxrwxr-x  7 crmpicco  _www    224 20 Aug 16:27 crmpicco