log

16:44:59 kernel: Wrong Mac address, mac = 50:60:28:14:c4:11   profile =50:60:28:14:c4:01
16:44:59 kernel: ERROR @wl_cfg80211_get_station : 
16:44:59 kernel: Wrong Mac address, mac = 50:60:28:14:c4:11   profile =50:60:28:14:c4:01
16:44:59 kernel: ERROR @wl_cfg80211_get_station : 
16:30:59 kernel: Wrong Mac address, mac = 50:60:28:14:c4:01   profile =50:60:28:14:c4:11
16:30:59 kernel: ERROR @wl_cfg80211_get_station : 
16:30:59 kernel: Wrong Mac address, mac = 50:60:28:14:c4:01   profile =50:60:28:14:c4:11
16:30:59 kernel: ERROR @wl_cfg80211_get_station : 
16:10:07 kernel: Wrong Mac address, mac = 50:60:28:14:c4:11   profile =50:60:28:14:c4:01
16:10:07 kernel: ERROR @wl_cfg80211_get_station : 
16:10:07 kernel: Wrong Mac address, mac = 50:60:28:14:c4:11   profile =50:60:28:14:c4:01
16:10:07 kernel: ERROR @wl_cfg80211_get_station : 
16:09:43 kernel: WLC_SCAN error (-22)
16:09:43 kernel: ERROR @wl_cfg80211_scan : 
16:09:42 kernel: WLC_SCAN error (-22)
16:09:42 kernel: ERROR @wl_cfg80211_scan : 
16:09:41 kernel: WLC_SCAN error (-22)
16:09:41 kernel: ERROR @wl_cfg80211_scan : 
16:09:40 kernel: WLC_SCAN error (-22)
16:09:40 kernel: ERROR @wl_cfg80211_scan : 
16:09:39 kernel: WLC_SCAN error (-22)
16:09:39 kernel: ERROR @wl_cfg80211_scan : 
16:09:35 kernel: hid-generic 0003:058F:9410.0007: input,hidraw3: USB HID v1.10 Device [KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle] on usb-0000:00:14.0-2/input1
16:09:35 kernel: input: KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:058F:9410.0007/input/input29
16:09:35 kernel: hid-generic 0003:058F:9410.0006: input,hidraw2: USB HID v1.10 Keyboard [KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle] on usb-0000:00:14.0-2/input0
16:09:35 kernel: input: KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:058F:9410.0006/input/input28
16:09:35 kernel: Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found
16:09:35 kernel: bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2
16:09:35 kernel: Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
16:09:35 kernel: Bluetooth: hci0: BCM20702A
16:09:35 kernel: Bluetooth: hci0: BCM: chip id 63
16:09:35 kernel: usb 1-2: new low-speed USB device number 7 using xhci_hcd
16:09:35 kernel: hid-generic 0003:1BCF:0005.0005: input,hidraw1: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1/input0
16:09:35 kernel: input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1BCF:0005.0005/input/input27
16:09:35 kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
16:09:35 kernel: usb 1-1: new low-speed USB device number 6 using xhci_hcd
16:09:35 kernel: pci_bus 0000:02: Allocating resources
16:09:35 kernel: pci_bus 0000:01: Allocating resources
16:09:35 kernel: pci_bus 0000:02: Allocating resources
16:09:35 kernel: pci_bus 0000:01: Allocating resources
16:09:35 kernel: pci_bus 0000:02: Allocating resources
16:09:35 kernel: pci_bus 0000:01: Allocating resources
16:09:35 kernel: Restarting tasks ... done.
16:09:35 kernel: PM: Finishing wakeup.
16:09:35 kernel: usb 1-3:1.1: rebind failed: -517
16:09:35 kernel: usb 1-3:1.0: rebind failed: -517
16:09:35 kernel: PM: resume of devices complete after 721.675 msecs
16:09:35 kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
16:09:35 kernel: usb 1-3: reset full-speed USB device number 2 using xhci_hcd
16:09:35 kernel: ata4.00: configured for UDMA/133
16:09:35 kernel: ata4.00: NCQ Send/Recv Log not supported
16:09:35 kernel: ata4.00: NCQ Send/Recv Log not supported
16:09:35 kernel: ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
16:09:35 kernel: usb 3-1: reset high-speed USB device number 2 using ehci-pci
16:09:35 kernel: rtc_cmos 00:01: System wakeup disabled by ACPI
16:09:35 kernel: sd 3:0:0:0: [sda] Starting disk
16:09:35 kernel: usb usb2: root hub lost power or was reset
16:09:35 kernel: usb usb1: root hub lost power or was reset
16:09:35 kernel: ACPI : EC: event unblocked
16:09:35 kernel: PM: early resume of devices complete after 49.970 msecs
16:09:35 kernel: PM: noirq resume of devices complete after 36.854 msecs
16:09:35 kernel: xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
16:09:35 kernel: ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
16:09:35 kernel: ACPI: Waking up from system sleep state S3
16:09:35 kernel: CPU3 is up
16:09:35 kernel:  cache: parent cpu3 should not be sleeping
16:09:35 kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
16:09:35 kernel: CPU2 is up
16:09:35 kernel:  cache: parent cpu2 should not be sleeping
16:09:35 kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
16:09:35 kernel: CPU1 is up
16:09:35 kernel:  cache: parent cpu1 should not be sleeping
16:09:35 kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
16:09:35 kernel: x86: Booting SMP configuration:
16:09:35 kernel: Enabling non-boot CPUs ...
16:09:35 kernel: Suspended for 362.403 seconds
16:09:35 kernel: PM: Restoring platform NVS memory
16:09:35 kernel: ACPI : EC: EC started
16:09:35 kernel: ACPI: Low-level resume complete
16:09:35 kernel: smpboot: CPU 3 is now offline
16:09:35 kernel: smpboot: CPU 2 is now offline
16:09:35 kernel: smpboot: CPU 1 is now offline
16:09:35 kernel: Disabling non-boot CPUs ...
16:09:35 kernel: PM: Saving platform NVS memory
16:09:35 kernel: ACPI : EC: EC stopped
16:09:35 kernel: ACPI : EC: event blocked
16:09:35 kernel: ACPI: Preparing to enter system sleep state S3
16:09:35 kernel: PM: noirq suspend of devices complete after 36.576 msecs
16:09:35 kernel: xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
16:09:35 kernel: ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
16:09:35 kernel: PM: late suspend of devices complete after 17.821 msecs
16:09:35 kernel: PM: suspend of devices complete after 1275.323 msecs
16:09:35 kernel: wlp2s0 Scan_results error (-22)
16:09:35 kernel: ERROR @wl_notify_scan_status : 
16:09:35 kernel: sd 3:0:0:0: [sda] Stopping disk
16:09:35 kernel: sd 3:0:0:0: [sda] Synchronizing SCSI cache
16:09:35 kernel: Suspending console(s) (use no_console_suspend to debug)
16:09:35 kernel: PM: Suspending system (mem)
16:09:35 kernel: Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
16:09:35 kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
16:09:35 kernel: PM: Preparing system for sleep (mem)
16:09:35 kernel: PM: Syncing filesystems ... done.
15:03:26 kernel: wlp2s0 Scan_results error (-22)
15:03:26 kernel: ERROR @wl_notify_scan_status : 
15:03:22 kernel: Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found
15:03:22 kernel: bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2
15:03:22 kernel: Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
15:03:22 kernel: Bluetooth: hci0: BCM20702A
15:03:22 kernel: Bluetooth: hci0: BCM: chip id 63
15:03:22 kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
15:03:22 kernel: done.
15:03:22 kernel: pci_bus 0000:02: Allocating resources
15:03:22 kernel: pci_bus 0000:01: Allocating resources
15:03:22 kernel: pci_bus 0000:02: Allocating resources
15:03:22 kernel: pci_bus 0000:01: Allocating resources
15:03:22 kernel: pci_bus 0000:02: Allocating resources
15:03:22 kernel: pci_bus 0000:01: Allocating resources
15:03:22 kernel: Restarting tasks ... 
15:03:22 kernel: PM: Finishing wakeup.
15:03:22 kernel: usb 1-3:1.1: rebind failed: -517
15:03:22 kernel: usb 1-3:1.0: rebind failed: -517
15:03:22 kernel: PM: resume of devices complete after 701.743 msecs
15:03:22 kernel: usb 1-3: reset full-speed USB device number 2 using xhci_hcd
15:03:22 kernel: ata4.00: configured for UDMA/133
15:03:22 kernel: ata4.00: NCQ Send/Recv Log not supported
15:03:22 kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
15:03:22 kernel: ata4.00: NCQ Send/Recv Log not supported
15:03:22 kernel: ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
15:03:22 kernel: usb 3-1: reset high-speed USB device number 2 using ehci-pci
15:03:22 kernel: sd 3:0:0:0: [sda] Starting disk
15:03:22 kernel: rtc_cmos 00:01: System wakeup disabled by ACPI
15:03:22 kernel: usb usb2: root hub lost power or was reset
15:03:22 kernel: usb usb1: root hub lost power or was reset
15:03:22 kernel: ACPI : EC: event unblocked
15:03:22 kernel: PM: early resume of devices complete after 48.631 msecs
15:03:22 kernel: PM: noirq resume of devices complete after 34.920 msecs
15:03:22 kernel: xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
15:03:22 kernel: ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
15:03:22 kernel: ACPI: Waking up from system sleep state S3
15:03:22 kernel: CPU3 is up
15:03:22 kernel:  cache: parent cpu3 should not be sleeping
15:03:22 kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
15:03:22 kernel: CPU2 is up
15:03:22 kernel:  cache: parent cpu2 should not be sleeping
15:03:22 kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
15:03:22 kernel: CPU1 is up
15:03:22 kernel:  cache: parent cpu1 should not be sleeping
15:03:22 kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
15:03:22 kernel: x86: Booting SMP configuration:
15:03:22 kernel: Enabling non-boot CPUs ...
15:03:22 kernel: Suspended for 314.107 seconds
15:03:22 kernel: PM: Restoring platform NVS memory
15:03:22 kernel: ACPI : EC: EC started
15:03:22 kernel: ACPI: Low-level resume complete
15:03:22 kernel: smpboot: CPU 3 is now offline
15:03:22 kernel: smpboot: CPU 2 is now offline
15:03:22 kernel: smpboot: CPU 1 is now offline
15:03:22 kernel: Disabling non-boot CPUs ...
15:03:22 kernel: PM: Saving platform NVS memory
15:03:22 kernel: ACPI : EC: EC stopped
15:03:22 kernel: ACPI : EC: event blocked
15:03:22 kernel: ACPI: Preparing to enter system sleep state S3
15:03:22 kernel: PM: noirq suspend of devices complete after 33.269 msecs
15:03:22 kernel: xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
15:03:22 kernel: ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
15:03:22 kernel: PM: late suspend of devices complete after 14.575 msecs
15:03:22 kernel: PM: suspend of devices complete after 1245.188 msecs
15:03:22 kernel: wlp2s0 Scan_results error (-22)
15:03:22 kernel: ERROR @wl_notify_scan_status : 
15:03:22 kernel: sd 3:0:0:0: [sda] Stopping disk
15:03:22 kernel: sd 3:0:0:0: [sda] Synchronizing SCSI cache
15:03:22 kernel: Suspending console(s) (use no_console_suspend to debug)
15:03:22 kernel: PM: Suspending system (mem)
15:03:22 kernel: Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
15:03:22 kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
15:03:22 kernel: PM: Preparing system for sleep (mem)
15:03:22 kernel: PM: Syncing filesystems ... done.
14:57:46 kernel: usb 1-1: USB disconnect, device number 4
14:57:46 kernel: usb 1-2: USB disconnect, device number 5
14:28:05 kernel: Wrong Mac address, mac = 50:60:28:14:c4:11   profile =c8:b5:ad:ac:3b:60
14:28:05 kernel: ERROR @wl_cfg80211_get_station : 
14:28:05 kernel: Wrong Mac address, mac = 50:60:28:14:c4:11   profile =c8:b5:ad:ac:3b:60
14:28:05 kernel: ERROR @wl_cfg80211_get_station : 
14:21:08 kernel: hid-generic 0003:058F:9410.0004: input,hidraw3: USB HID v1.10 Device [KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle] on usb-0000:00:14.0-2/input1
14:21:08 kernel: input: KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:058F:9410.0004/input/input22
14:21:08 kernel: hid-generic 0003:058F:9410.0003: input,hidraw2: USB HID v1.10 Keyboard [KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle] on usb-0000:00:14.0-2/input0
14:21:08 kernel: input: KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:058F:9410.0003/input/input21
14:21:08 kernel: usb 1-2: new low-speed USB device number 5 using xhci_hcd
14:20:50 kernel: hid-generic 0003:1BCF:0005.0002: input,hidraw1: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1/input0
14:20:50 kernel: input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1BCF:0005.0002/input/input20
14:20:50 kernel: usbhid: USB HID core driver
14:20:50 kernel: usbcore: registered new interface driver usbhid
14:20:50 kernel: usb 1-1: new low-speed USB device number 4 using xhci_hcd
14:20:40 kernel: Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found
14:20:40 kernel: bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2
14:20:40 kernel: Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
14:20:40 kernel: Bluetooth: hci0: BCM20702A
14:20:40 kernel: Bluetooth: hci0: BCM: chip id 63
14:20:40 kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
14:20:40 kernel: done.
14:20:40 kernel: pci_bus 0000:02: Allocating resources
14:20:40 kernel: pci_bus 0000:01: Allocating resources
14:20:40 kernel: pci_bus 0000:02: Allocating resources
14:20:40 kernel: pci_bus 0000:01: Allocating resources
14:20:40 kernel: pcieport 0000:00:1c.3: BAR 13: assigned [io  0x3000-0x3fff]
14:20:40 kernel: pcieport 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
14:20:40 kernel: pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xdfa00000-0xdfbfffff 64bit pref]
14:20:40 kernel: pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdf800000-0xdf9fffff 64bit pref]
14:20:40 kernel: pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
14:20:40 kernel: pcieport 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
14:20:40 kernel: pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
14:20:40 kernel: pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
14:20:40 kernel: pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
14:20:40 kernel: pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
14:20:40 kernel: pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
14:20:40 kernel: pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
14:20:40 kernel: pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
14:20:40 kernel: pcieport 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
14:20:40 kernel: pci_bus 0000:02: Allocating resources
14:20:40 kernel: pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
14:20:40 kernel: pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
14:20:40 kernel: pci_bus 0000:01: Allocating resources
14:20:40 kernel: Restarting tasks ... 
14:20:40 kernel: PM: Finishing wakeup.
14:20:40 kernel: usb 1-3:1.1: rebind failed: -517
14:20:40 kernel: usb 1-3:1.0: rebind failed: -517
14:20:40 kernel: PM: resume of devices complete after 722.168 msecs
14:20:40 kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
14:20:40 kernel: usb 1-3: reset full-speed USB device number 2 using xhci_hcd
14:20:40 kernel: ata4.00: configured for UDMA/133
14:20:40 kernel: ata4.00: NCQ Send/Recv Log not supported
14:20:40 kernel: ata4.00: NCQ Send/Recv Log not supported
14:20:40 kernel: ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
14:20:40 kernel: usb 3-1: reset high-speed USB device number 2 using ehci-pci
14:20:40 kernel: rtc_cmos 00:01: System wakeup disabled by ACPI
14:20:40 kernel: ACPI : button: The lid device is not compliant to SW_LID.
14:20:40 kernel: sd 3:0:0:0: [sda] Starting disk
14:20:40 kernel: usb usb2: root hub lost power or was reset
14:20:40 kernel: usb usb1: root hub lost power or was reset
14:20:40 kernel: ACPI : EC: event unblocked
14:20:40 kernel: PM: early resume of devices complete after 48.519 msecs
14:20:40 kernel: PM: noirq resume of devices complete after 34.843 msecs
14:20:40 kernel: xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
14:20:40 kernel: ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
14:20:40 kernel: ACPI: Waking up from system sleep state S3
14:20:40 kernel: CPU3 is up
14:20:40 kernel:  cache: parent cpu3 should not be sleeping
14:20:40 kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
14:20:40 kernel: CPU2 is up
14:20:40 kernel:  cache: parent cpu2 should not be sleeping
14:20:40 kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
14:20:40 kernel: CPU1 is up
14:20:40 kernel:  cache: parent cpu1 should not be sleeping
14:20:40 kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
14:20:40 kernel: x86: Booting SMP configuration:
14:20:40 kernel: Enabling non-boot CPUs ...
14:20:40 kernel: Suspended for 257.165 seconds
14:20:40 kernel: PM: Restoring platform NVS memory
14:20:40 kernel: ACPI : EC: EC started
14:20:40 kernel: ACPI: Low-level resume complete
14:20:40 kernel: smpboot: CPU 3 is now offline
14:20:40 kernel: smpboot: CPU 2 is now offline
14:20:40 kernel: smpboot: CPU 1 is now offline
14:20:40 kernel: Disabling non-boot CPUs ...
14:20:40 kernel: PM: Saving platform NVS memory
14:20:40 kernel: ACPI : EC: EC stopped
14:20:40 kernel: ACPI : EC: event blocked
14:20:40 kernel: ACPI: Preparing to enter system sleep state S3
14:20:40 kernel: PM: noirq suspend of devices complete after 33.310 msecs
14:20:40 kernel: xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
14:20:40 kernel: ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
14:20:40 kernel: PM: late suspend of devices complete after 14.516 msecs
14:20:40 kernel: PM: suspend of devices complete after 1276.201 msecs
14:20:40 kernel: wlp2s0 Scan_results error (-22)
14:20:40 kernel: ERROR @wl_notify_scan_status : 
14:20:40 kernel: sd 3:0:0:0: [sda] Stopping disk
14:20:40 kernel: sd 3:0:0:0: [sda] Synchronizing SCSI cache
14:20:40 kernel: Suspending console(s) (use no_console_suspend to debug)
14:20:40 kernel: PM: Suspending system (mem)
14:20:40 kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
14:20:40 kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
14:20:40 kernel: PM: Preparing system for sleep (mem)
14:20:40 kernel: PM: Syncing filesystems ... done.
13:51:40 kernel: fuse init (API version 7.26)
13:51:39 kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
13:51:39 kernel: Bluetooth: BNEP socket layer initialized
13:51:39 kernel: Bluetooth: BNEP filters: protocol multicast
13:51:39 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
13:51:39 kernel: input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
13:51:39 kernel: input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
13:51:39 kernel: input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
13:51:39 kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
13:51:39 kernel: Console: switching to colour frame buffer device 240x67
13:51:39 kernel: USB Video Class driver (1.1.1)
13:51:39 kernel: usbcore: registered new interface driver uvcvideo
13:51:39 kernel: input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14
13:51:39 kernel: uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
13:51:39 kernel: uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
13:51:39 kernel: uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
13:51:39 kernel: uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
13:51:39 kernel: uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5682)
13:51:39 kernel: Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found
13:51:39 kernel: bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2
13:51:39 kernel: Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
13:51:39 kernel: Bluetooth: hci0: BCM20702A
13:51:39 kernel: Bluetooth: hci0: BCM: chip id 63
13:51:39 kernel: usbcore: registered new interface driver btusb
13:51:39 kernel: Bluetooth: SCO socket layer initialized
13:51:39 kernel: Bluetooth: L2CAP socket layer initialized
13:51:39 kernel: Bluetooth: HCI socket layer initialized
13:51:39 kernel: Bluetooth: HCI device and connection manager initialized
13:51:39 kernel: NET: Registered protocol family 31
13:51:39 kernel: Bluetooth: Core ver 2.22
13:51:39 kernel: Linux video capture interface: v2.00
13:51:39 kernel: media: Linux media interface: v0.10
13:51:39 kernel: wl 0000:02:00.0 wlp2s0: renamed from wlan0
13:51:39 kernel: 
13:51:39 kernel: wlan0: Broadcom BCM43b1 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
13:51:39 kernel: mousedev: PS/2 mouse device common for all mice
13:51:39 kernel: wl 0000:02:00.0: enabling device (0000 -> 0002)
13:51:39 kernel: Disabling lock debugging due to kernel taint
13:51:39 kernel: wl: module license 'MIXED/Proprietary' taints kernel.
13:51:39 kernel: wl: loading out-of-tree module taints kernel.
13:51:39 kernel: hid-multitouch 0018:06CB:76AD.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL0665:01 06CB:76AD] on i2c-DLL0665:01
13:51:39 kernel: input: DLL0665:01 06CB:76AD Touchpad as /devices/pci0000:00/INT3433:00/i2c-1/i2c-DLL0665:01/0018:06CB:76AD.0001/input/input12
13:51:39 kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
13:51:39 kernel: iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
13:51:39 kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
13:51:39 kernel: iTCO_vendor_support: vendor-support=0
13:51:39 kernel: intel_rapl: RAPL package 0 domain dram locked by BIOS
13:51:39 kernel: intel_rapl: RAPL package 0 domain package locked by BIOS
13:51:39 kernel: intel_rapl: Found RAPL domain dram
13:51:39 kernel: intel_rapl: Found RAPL domain uncore
13:51:39 kernel: intel_rapl: Found RAPL domain core
13:51:39 kernel: intel_rapl: Found RAPL domain package
13:51:39 kernel: input: Dell WMI hotkeys as /devices/virtual/input/input11
13:51:39 kernel: dell_wmi: Detected Dell WMI interface version 1
13:51:39 kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
13:51:39 kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
13:51:39 kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
13:51:39 kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
13:51:39 kernel: RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
13:51:39 kernel: input: PC Speaker as /devices/platform/pcspkr/input/input9
13:51:39 kernel: fbcon: inteldrmfb (fb0) is primary device
13:51:37 kernel: [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
13:51:37 kernel: snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
13:51:37 kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
13:51:37 kernel: ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
13:51:37 kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
13:51:37 kernel: [drm] Driver supports precise vblank timestamp query.
13:51:37 kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
13:51:37 kernel: input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
13:51:37 kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
13:51:37 kernel: [drm] ACPI BIOS requests an excessive sleep of 25000 ms, using 1500 ms instead
13:51:37 kernel: [drm] Replacing VGA console driver
13:51:37 kernel: Console: switching to colour dummy device 80x25
13:51:37 kernel: fb: switching to inteldrmfb from EFI VGA
13:51:37 kernel: checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
13:51:37 kernel: [drm] Memory usable by graphics device = 4096M
13:51:37 kernel: dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
13:51:37 kernel: snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
13:51:37 kernel: snd_hda_codec_realtek hdaudioC1D0:      Headphone Mic=0x1a
13:51:37 kernel: snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x18
13:51:37 kernel: snd_hda_codec_realtek hdaudioC1D0:    inputs:
13:51:37 kernel: snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
13:51:37 kernel: snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
13:51:37 kernel: snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
13:51:37 kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3263: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
13:51:37 kernel: snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
13:51:37 kernel: snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
13:51:37 kernel: hidraw: raw HID events driver (C) Jiri Kosina
13:51:37 kernel: i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
13:51:37 kernel: i801_smbus 0000:00:1f.3: SPD Write Disable is set
13:51:37 kernel: intel_pch_thermal 0000:00:1f.6: enabling device (0000 -> 0002)
13:51:37 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
13:51:37 kernel: [drm] Initialized
13:51:37 kernel: ACPI: Thermal Zone [TZ01] (50 C)
13:51:37 kernel: thermal LNXTHERM:02: registered as thermal_zone9
13:51:37 kernel: ACPI: Thermal Zone [TZ00] (50 C)
13:51:37 kernel: thermal LNXTHERM:01: registered as thermal_zone8
13:51:37 kernel: wmi: Mapper loaded
13:51:37 kernel: ACPI: Battery Slot [BAT0] (battery present)
13:51:37 kernel: ACPI: Thermal Zone [THM] (25 C)
13:51:37 kernel: thermal LNXTHERM:00: registered as thermal_zone4
13:51:37 kernel: _ART package 0 is invalid, ignored
13:51:37 kernel: ACPI: Invalid package element [0]: got number, expecting [R]
13:51:37 kernel: ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20160831/nspredef-297)
13:51:37 kernel: proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
13:51:37 kernel: FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
13:51:37 kernel: ACPI: Power Button [PWRF]
13:51:37 kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
13:51:37 kernel: ACPI: Sleep Button [SBTN]
13:51:37 kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
13:51:37 kernel: ACPI: Power Button [PBTN]
13:51:37 kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
13:51:37 kernel: ACPI: Lid Switch [LID0]
13:51:37 kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
13:51:37 kernel: ACPI: AC Adapter [AC] (off-line)
13:51:37 kernel: EXT4-fs (dm-0): re-mounted. Opts: discard
13:51:37 kernel: Reached target Login Prompts.
13:51:37 kernel: Listening on Journal Socket.
13:51:37 kernel: Reached target Remote File Systems.
13:51:37 kernel: Listening on Journal Socket (/dev/log).
13:51:37 kernel: Listening on LVM2 metadata daemon socket.
13:51:37 kernel: Unnecessary job for /dev/mapper/luks-de0bd24b-73d9-4ba6-a3b6-e57e5346780b was removed.
13:51:37 kernel: Unnecessary job for dev-mapper-luks\x2d93ec8427\x2d3948\x2d4a8b\x2da940\x2d2052cb3e403e.device was removed.
13:51:37 kernel: Set hostname to <pito>.
13:51:37 kernel: Detected architecture x86-64.
13:51:37 kernel: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
13:51:37 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
13:51:37 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
13:51:37 kernel: PM: Hibernation image not present or could not be loaded.
13:51:37 kernel: PM: Image not found (code -22)
13:51:37 kernel: PM: Looking for hibernation image.
13:51:37 kernel: PM: Hibernation image partition 8:3 present
13:51:37 kernel: PM: Starting manual resume from disk
13:51:37 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
13:51:37 kernel: EXT4-fs (dm-0): recovery complete
13:51:37 kernel: EXT4-fs (dm-0): 6 orphan inodes deleted
13:51:37 kernel: random: crng init done
13:51:37 kernel: random: fast init done
13:51:37 kernel: random: cryptsetup: uninitialized urandom read (2 bytes read)
13:51:37 kernel: NET: Registered protocol family 38
13:51:37 kernel: clocksource: Switched to clocksource tsc
13:51:37 kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa37202099, max_idle_ns: 440795206796 ns
13:51:37 kernel: tsc: Refined TSC clocksource calibration: 2194.918 MHz
13:51:37 kernel: device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
13:51:37 kernel: device-mapper: uevent: version 1.0.3
13:51:37 kernel: usb 1-5: new high-speed USB device number 3 using xhci_hcd
13:51:37 kernel: hub 3-1:1.0: 8 ports detected
13:51:37 kernel: hub 3-1:1.0: USB hub found
13:51:37 kernel: sd 3:0:0:0: [sda] Attached SCSI disk
13:51:37 kernel:  sda: sda1 sda2 sda3
13:51:37 kernel: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
13:51:37 kernel: sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
13:51:37 kernel: sd 3:0:0:0: [sda] Write Protect is off
13:51:37 kernel: sd 3:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
13:51:37 kernel: usb 3-1: new high-speed USB device number 2 using ehci-pci
13:51:37 kernel: scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG SSD PM85 5D0Q PQ: 0 ANSI: 5
13:51:37 kernel: ata4.00: configured for UDMA/133
13:51:37 kernel: ata4.00: NCQ Send/Recv Log not supported
13:51:37 kernel: ata4.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
13:51:37 kernel: ata4.00: ATA-9: SAMSUNG SSD PM851 M.2 2280 128GB, EXT25D0Q, max UDMA/133
13:51:37 kernel: ata4.00: NCQ Send/Recv Log not supported
13:51:37 kernel: ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
13:51:37 kernel: usb 1-3: new full-speed USB device number 2 using xhci_hcd
13:51:37 kernel: hub 3-0:1.0: 2 ports detected
13:51:37 kernel: hub 3-0:1.0: USB hub found
13:51:37 kernel: ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
13:51:37 kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
13:51:37 kernel: ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7423000
13:51:37 kernel: ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
13:51:37 kernel: ehci-pci 0000:00:1d.0: debug port 2
13:51:37 kernel: ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
13:51:37 kernel: ehci-pci 0000:00:1d.0: EHCI Host Controller
13:51:37 kernel: ata4: SATA max UDMA/133 abar m2048@0xf7422000 port 0xf7422280 irq 46
13:51:37 kernel: ata3: DUMMY
13:51:37 kernel: ata2: DUMMY
13:51:37 kernel: ata1: DUMMY
13:51:37 kernel: scsi host3: ahci
13:51:37 kernel: scsi host2: ahci
13:51:37 kernel: scsi host1: ahci
13:51:37 kernel: scsi host0: ahci
13:51:37 kernel: ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst 
13:51:37 kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode
13:51:37 kernel: ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
13:51:37 kernel: ahci 0000:00:1f.2: version 3.0
13:51:37 kernel: hub 2-0:1.0: 4 ports detected
13:51:37 kernel: hub 2-0:1.0: USB hub found
13:51:37 kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
13:51:37 kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
13:51:37 kernel: AES CTR mode by8 optimization enabled
13:51:37 kernel: AVX2 version of gcm_enc/dec engaged.
13:51:37 kernel: hub 1-0:1.0: 11 ports detected
13:51:37 kernel: hub 1-0:1.0: USB hub found
13:51:37 kernel: xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
13:51:37 kernel: xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
13:51:37 kernel: ehci-pci: EHCI PCI platform driver
13:51:37 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
13:51:37 kernel: libata version 3.00 loaded.
13:51:37 kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
13:51:37 kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
13:51:37 kernel: SCSI subsystem initialized
13:51:37 kernel: usbcore: registered new device driver usb
13:51:37 kernel: usbcore: registered new interface driver hub
13:51:37 kernel: usbcore: registered new interface driver usbfs
13:51:37 kernel: ACPI: bus type USB registered
13:51:37 kernel: rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 44
13:51:37 kernel: rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
13:51:37 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
13:51:37 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
13:51:37 kernel: i8042: Warning: Keylock active
13:51:37 kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
13:51:37 kernel: sdhci: Copyright(c) Pierre Ossman
13:51:37 kernel: sdhci: Secure Digital Host Controller Interface driver
13:51:37 kernel: Freeing unused kernel memory: 80K
13:51:37 kernel: Freeing unused kernel memory: 1892K
13:51:37 kernel: Write protecting the kernel read-only data: 10240k
13:51:37 kernel: Freeing unused kernel memory: 1280K
13:51:37 kernel: PM: Hibernation image not present or could not be loaded.
13:51:37 kernel: PM: Checking hibernation image partition UUID=93ec8427-3948-4a8b-a940-2052cb3e403e
13:51:37 kernel: rtc_cmos 00:01: setting system clock to 2017-10-30 17:51:16 UTC (1509385876)
13:51:37 kernel: acpi INT33D6:00: hash matches
13:51:37 kernel:   Magic number: 5:423:897
13:51:37 kernel: zswap: loaded using pool lzo/zbud
13:51:37 kernel: Loading compiled-in X.509 certificates
13:51:37 kernel: registered taskstats version 1
13:51:37 kernel: microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
13:51:37 kernel: microcode: sig=0x306d4, pf=0x40, revision=0x25
13:51:37 kernel: NET: Registered protocol family 17
13:51:37 kernel: NET: Registered protocol family 10
13:51:37 kernel: ledtrig-cpu: registered to indicate activity on CPUs
13:51:37 kernel: intel_pstate: Intel P-state driver initializing
13:51:37 kernel: rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
13:51:37 kernel: rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
13:51:37 kernel: rtc_cmos 00:01: RTC can wake from S4
13:51:37 kernel: Linux agpgart interface v0.103
13:51:37 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
13:51:37 kernel: GHES: HEST is not enabled!
13:51:37 kernel: intel_idle: lapic_timer_reliable_states 0xffffffff
13:51:37 kernel: intel_idle: v0.4.1 model 0x3D
13:51:37 kernel: intel_idle: MWAIT substates: 0x11142120
13:51:37 kernel: fb0: EFI VGA frame buffer device
13:51:37 kernel: Console: switching to colour frame buffer device 240x67
13:51:37 kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
13:51:37 kernel: efifb: scrolling: redraw
13:51:37 kernel: efifb: mode is 1920x1080x32, linelength=7680, pages=1
13:51:37 kernel: efifb: framebuffer at 0xe0000000, using 8128k, total 8128k
13:51:37 kernel: efifb: probing for efifb
13:51:37 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
13:51:37 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
13:51:37 kernel: pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
13:51:37 kernel: pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
13:51:37 kernel: pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
13:51:37 kernel: pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
13:51:37 kernel: pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
13:51:37 kernel: pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
13:51:37 kernel: BFQ I/O-scheduler: v8r12 (with cgroups support)
13:51:37 kernel: io scheduler bfq registered (default)
13:51:37 kernel: io scheduler cfq registered
13:51:37 kernel: io scheduler deadline registered
13:51:37 kernel: io scheduler noop registered
13:51:37 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
13:51:37 kernel: Key type asymmetric registered
13:51:37 kernel: zbud: loaded
13:51:37 kernel: workingset: timestamp_bits=40 max_order=21 bucket_order=0
13:51:37 kernel: Initialise system trusted keyrings
13:51:37 kernel: Scanning for low memory corruption every 60 seconds
13:51:37 kernel: software IO TLB [mem 0xd2e1d000-0xd6e1d000] (64MB) mapped at [ffff8800d2e1d000-ffff8800d6e1cfff]
13:51:37 kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
13:51:37 kernel: DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
13:51:37 kernel: Freeing initrd memory: 10476K
13:51:37 kernel: Unpacking initramfs...
13:51:37 kernel: PCI: CLS 64 bytes, default 64
13:51:37 kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
13:51:37 kernel: NET: Registered protocol family 1
13:51:37 kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
13:51:37 kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes)
13:51:37 kernel: TCP: Hash tables configured (established 65536 bind 65536)
13:51:37 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
13:51:37 kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes)
13:51:37 kernel: NET: Registered protocol family 2
13:51:37 kernel: pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf72fffff]
13:51:37 kernel: pci_bus 0000:01: resource 1 [mem 0xf7300000-0xf73fffff]
13:51:37 kernel: pci_bus 0000:00: resource 15 [mem 0xdf800000-0xfeafffff window]
13:51:37 kernel: pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
13:51:37 kernel: pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
13:51:37 kernel: pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
13:51:37 kernel: pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
13:51:37 kernel: pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
13:51:37 kernel: pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
13:51:37 kernel: pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
13:51:37 kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
13:51:37 kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
13:51:37 kernel: pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
13:51:37 kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
13:51:37 kernel: pci 0000:00:1c.3:   bridge window [mem 0xf7000000-0xf72fffff]
13:51:37 kernel: pci 0000:00:1c.3: PCI bridge to [bus 02]
13:51:37 kernel: pci 0000:00:1c.0:   bridge window [mem 0xf7300000-0xf73fffff]
13:51:37 kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
13:51:37 kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
13:51:37 kernel: pnp: PnP ACPI: found 7 devices
13:51:37 kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
13:51:37 kernel: system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
13:51:37 kernel: system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
13:51:37 kernel: system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
13:51:37 kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
13:51:37 kernel: system 00:05: [mem 0xf7ff0000-0xf7ffffff] has been reserved
13:51:37 kernel: system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved
13:51:37 kernel: system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
13:51:37 kernel: system 00:05: [mem 0xff000000-0xffffffff] has been reserved
13:51:37 kernel: system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved
13:51:37 kernel: system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
13:51:37 kernel: system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
13:51:37 kernel: system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
13:51:37 kernel: system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
13:51:37 kernel: system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
13:51:37 kernel: system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
13:51:37 kernel: system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
13:51:37 kernel: pnp 00:04: Plug and Play ACPI device, IDs DLL0665 PNP0f13 (active)
13:51:37 kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
13:51:37 kernel: system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
13:51:37 kernel: system 00:02: [io  0x1854-0x1857] has been reserved
13:51:37 kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
13:51:37 kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
13:51:37 kernel: system 00:00: [io  0x164e-0x164f] has been reserved
13:51:37 kernel: system 00:00: [io  0x1800-0x18fe] has been reserved
13:51:37 kernel: system 00:00: [io  0xffff] has been reserved
13:51:37 kernel: system 00:00: [io  0xffff] has been reserved
13:51:37 kernel: system 00:00: [io  0xffff] has been reserved
13:51:37 kernel: system 00:00: [io  0x0680-0x069f] has been reserved
13:51:37 kernel: pnp: PnP ACPI init
13:51:37 kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
13:51:37 kernel: VFS: Disk quotas dquot_6.6.0
13:51:37 kernel: clocksource: Switched to clocksource hpet
13:51:37 kernel: hpet0: 8 comparators, 64-bit 14.318180 MHz counter
13:51:37 kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
13:51:37 kernel: NetLabel:  unlabeled traffic allowed by default
13:51:37 kernel: NetLabel:  protocols = UNLABELED CIPSOv4
13:51:37 kernel: NetLabel:  domain hash size = 128
13:51:37 kernel: NetLabel: Initializing
13:51:37 kernel: e820: reserve RAM buffer [mem 0x21f800000-0x21fffffff]
13:51:37 kernel: e820: reserve RAM buffer [mem 0xdbaff000-0xdbffffff]
13:51:37 kernel: e820: reserve RAM buffer [mem 0xdadd0000-0xdbffffff]
13:51:37 kernel: e820: reserve RAM buffer [mem 0xc8249000-0xcbffffff]
13:51:37 kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
13:51:37 kernel: e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
13:51:37 kernel: PCI: pci_cache_line_size set to 64 bytes
13:51:37 kernel: PCI: Using ACPI for IRQ routing
13:51:37 kernel: Registered efivars operations
13:51:37 kernel: vgaarb: bridge control possible 0000:00:02.0
13:51:37 kernel: vgaarb: loaded
13:51:37 kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
13:51:37 kernel: vgaarb: setting as boot device: PCI:0000:00:02.0
13:51:37 kernel: dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
13:51:37 kernel: ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
13:51:37 kernel: ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x27, EC_CMD/EC_SC=0x934, EC_DATA=0x930
13:51:37 kernel: ACPI : EC: event unblocked
13:51:37 kernel: ACPI : EC: interrupt unblocked
13:51:37 kernel: ACPI: Enabled 3 GPEs in block 00 to 7F
13:51:37 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
13:51:37 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
13:51:37 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
13:51:37 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
13:51:37 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
13:51:37 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
13:51:37 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
13:51:37 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
13:51:37 kernel: pci 0000:00:1c.3:   bridge window [mem 0xf7000000-0xf72fffff]
13:51:37 kernel: pci 0000:00:1c.3: PCI bridge to [bus 02]
13:51:37 kernel: pci 0000:02:00.0: System wakeup disabled by ACPI
13:51:37 kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
13:51:37 kernel: pci 0000:02:00.0: supports D1 D2
13:51:37 kernel: pci 0000:02:00.0: reg 0x18: [mem 0xf7000000-0xf71fffff 64bit]
13:51:37 kernel: pci 0000:02:00.0: reg 0x10: [mem 0xf7200000-0xf7207fff 64bit]
13:51:37 kernel: pci 0000:02:00.0: [14e4:43b1] type 00 class 0x028000
13:51:37 kernel: pci 0000:00:1c.0:   bridge window [mem 0xf7300000-0xf73fffff]
13:51:37 kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
13:51:37 kernel: pci 0000:01:00.0: System wakeup disabled by ACPI
13:51:37 kernel: pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
13:51:37 kernel: pci 0000:01:00.0: supports D1 D2
13:51:37 kernel: pci 0000:01:00.0: reg 0x10: [mem 0xf7300000-0xf7300fff]
13:51:37 kernel: pci 0000:01:00.0: [10ec:5249] type 00 class 0xff0000
13:51:37 kernel: pci 0000:00:1f.6: reg 0x10: [mem 0xf7420000-0xf7420fff 64bit]
13:51:37 kernel: pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
13:51:37 kernel: pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
13:51:37 kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xf7421000-0xf74210ff 64bit]
13:51:37 kernel: pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
13:51:37 kernel: pci 0000:00:1f.2: PME# supported from D3hot
13:51:37 kernel: pci 0000:00:1f.2: reg 0x24: [mem 0xf7422000-0xf74227ff]
13:51:37 kernel: pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
13:51:37 kernel: pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
13:51:37 kernel: pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
13:51:37 kernel: pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
13:51:37 kernel: pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
13:51:37 kernel: pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
13:51:37 kernel: pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
13:51:37 kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
13:51:37 kernel: pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
13:51:37 kernel: pci 0000:00:1d.0: reg 0x10: [mem 0xf7423000-0xf74233ff]
13:51:37 kernel: pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320