SoC: Ingenic T20 - OpenIPC (NOR 16M, Ultimate, Wireless only, SD card slot)
After installation, run:
fw_setenv wlandev rtl8189ftv-t20-wyze-v2
There is no GPIO light sensor, will need to follow this guide: https://github.com/OpenIPC/wiki/blob/master/en/auto-night-mode-without-light-sensor.md
You might also want to modify the autonight.sh script to use the digital gain value instead of the analog gain. I found that the analog gain value very quickly capped at 128 even in a moderately lit room which led to the IR LEDs turning on unnecessarily.
Replace:
isp_again=$(echo "${metrics}" | awk '/^isp_again/ {print $2}' | grep . || echo 0)
With:
isp_again=$(echo "${metrics}" | awk '/^isp_dgain/ {print $2}' | grep . || echo 0)
Please probe this method
https://github.com/OpenIPC/wiki/blob/master/en/majestic-streamer.md#auto-daynight-detection