Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* import org.apache.log4j.Logger;
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
import org.apache.log4j.Logger;
import java.io.BufferedInputStream;
import java.io.BufferedOutputStream;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.InetAddress;
import java.net.ServerSocket;
import java.net.Socket;
import java.util.ArrayList;
import org.apache.commons.net.MalformedServerReplyException;
import org.apache.commons.net.ftp.*;
import org.apache.commons.net.ftp.parser.DefaultFTPFileEntryParserFactory;
import org.apache.commons.net.ftp.parser.FTPFileEntryParserFactory;
import org.apache.commons.net.ftp.parser.ParserInitializationException;
import org.apache.commons.net.io.CopyStreamEvent;
import org.apache.commons.net.io.CopyStreamException;
import org.apache.commons.net.io.FromNetASCIIInputStream;
import org.apache.commons.net.io.ToNetASCIIOutputStream;
import org.apache.commons.net.io.Util;
/***
* MyFTPClient encapsulates all the functionality necessary to store and
* retrieve files from an FTP server. This class takes care of all
* low level details of interacting with an FTP server and provides
* a convenient higher level interface. As with all classes derived
* from {@link org.apache.commons.net.SocketClient},
* you must first connect to the server with
* {@link org.apache.commons.net.SocketClient#connect connect }
* before doing anything, and finally
* {@link org.apache.commons.net.SocketClient#disconnect disconnect }
* after you're completely finished interacting with the server.
* Then you need to check the FTP reply code to see if the connection
* was successful. For example:
* <pre>
* boolean error = false;
* try {
* int reply;
* ftp.connect("ftp.foobar.com");
* System.out.println("Connected to " + server + ".");
* System.out.print(ftp.getReplyString());
*
* // After connection attempt, you should check the reply code to verify
* // success.
* reply = ftp.getReplyCode();
*
* if(!FTPReply.isPositiveCompletion(reply)) {
* ftp.disconnect();
* System.err.println("FTP server refused connection.");
* System.exit(1);
* }
* ... // transfer files
* ftp.logout();
* } catch(IOException e) {
* error = true;
* e.printStackTrace();
* } finally {
* if(ftp.isConnected()) {
* try {
* ftp.disconnect();
* } catch(IOException ioe) {
* // do nothing
* }
* }
* System.exit(error ? 1 : 0);
* }
* </pre>
* <p>
* Immediately after connecting is the only real time you need to check the
* reply code (because connect is of type void). The convention for all the
* FTP command methods in MyFTPClient is such that they either return a
* boolean value or some other value.
* The boolean methods return true on a successful completion reply from
* the FTP server and false on a reply resulting in an error condition or
* failure. The methods returning a value other than boolean return a value
* containing the higher level data produced by the FTP command, or null if a
* reply resulted in an error condition or failure. If you want to access
* the exact FTP reply code causing a success or failure, you must call
* {@link org.apache.commons.net.ftp.FTP#getReplyCode getReplyCode } after
* a success or failure.
* <p>
* The default settings for MyFTPClient are for it to use
* <code> FTP.ASCII_FILE_TYPE </code>,
* <code> FTP.NON_PRINT_TEXT_FORMAT </code>,
* <code> FTP.STREAM_TRANSFER_MODE </code>, and
* <code> FTP.FILE_STRUCTURE </code>. The only file types directly supported
* are <code> FTP.ASCII_FILE_TYPE </code> and
* <code> FTP.BINARY_FILE_TYPE </code>. Because there are at least 4
* different EBCDIC encodings, we have opted not to provide direct support
* for EBCDIC. To transfer EBCDIC and other unsupported file types you
* must create your own filter InputStreams and OutputStreams and wrap
* them around the streams returned or required by the MyFTPClient methods.
* MyFTPClient uses the {@link ToNetASCIIOutputStream NetASCII}
* filter streams to provide transparent handling of ASCII files. We will
* consider incorporating EBCDIC support if there is enough demand.
* <p>
* <code> FTP.NON_PRINT_TEXT_FORMAT </code>,
* <code> FTP.STREAM_TRANSFER_MODE </code>, and
* <code> FTP.FILE_STRUCTURE </code> are the only supported formats,
* transfer modes, and file structures.
* <p>
* Because the handling of sockets on different platforms can differ
* significantly, the MyFTPClient automatically issues a new PORT command
* prior to every transfer requiring that the server connect to the client's
* data port. This ensures identical problem-free behavior on Windows, Unix,
* and Macintosh platforms. Additionally, it relieves programmers from
* having to issue the PORT command themselves and dealing with platform
* dependent issues.
* <p>
* Additionally, for security purposes, all data connections to the
* client are verified to ensure that they originated from the intended
* party (host and port). If a data connection is initiated by an unexpected
* party, the command will close the socket and throw an IOException. You
* may disable this behavior with
* {@link #setRemoteVerificationEnabled setRemoteVerificationEnabled()}.
* <p>
* You should keep in mind that the FTP server may choose to prematurely
* close a connection if the client has been idle for longer than a
* given time period (usually 900 seconds). The MyFTPClient class will detect a
* premature FTP server connection closing when it receives a
* {@link org.apache.commons.net.ftp.FTPReply#SERVICE_NOT_AVAILABLE FTPReply.SERVICE_NOT_AVAILABLE }
* response to a command.
* When that occurs, the FTP class method encountering that reply will throw
* an {@link org.apache.commons.net.ftp.FTPConnectionClosedException}
* .
* <code>FTPConnectionClosedException</code>
* is a subclass of <code> IOException </code> and therefore need not be
* caught separately, but if you are going to catch it separately, its
* catch block must appear before the more general <code> IOException </code>
* catch block. When you encounter an
* {@link org.apache.commons.net.ftp.FTPConnectionClosedException}
* , you must disconnect the connection with
* {@link #disconnect disconnect() } to properly clean up the
* system resources used by MyFTPClient. Before disconnecting, you may check the
* last reply code and text with
* {@link org.apache.commons.net.ftp.FTP#getReplyCode getReplyCode },
* {@link org.apache.commons.net.ftp.FTP#getReplyString getReplyString },
* and
* {@link org.apache.commons.net.ftp.FTP#getReplyStrings getReplyStrings}.
* You may avoid server disconnections while the client is idle by
* periodicaly sending NOOP commands to the server.
* <p>
* Rather than list it separately for each method, we mention here that
* every method communicating with the server and throwing an IOException
* can also throw a
* {@link org.apache.commons.net.MalformedServerReplyException}
* , which is a subclass
* of IOException. A MalformedServerReplyException will be thrown when
* the reply received from the server deviates enough from the protocol
* specification that it cannot be interpreted in a useful manner despite
* attempts to be as lenient as possible.
* <p>
* Listing API Examples
* Both paged and unpaged examples of directory listings are available,
* as follows:
* <p>
* Unpaged (whole list) access, using a parser accessible by auto-detect:
* <pre>
* MyFTPClient f=MyFTPClient();
* f.connect(server);
* f.login(username, password);
* FTPFile[] files = listFiles(directory);
* </pre>
* <p>
* Paged access, using a parser not accessible by auto-detect. The class
* defined in the first parameter of initateListParsing should be derived
* from org.apache.commons.net.FTPFileEntryParser:
* <pre>
* MyFTPClient f=MyFTPClient();
* f.connect(server);
* f.login(username, password);
* FTPListParseEngine engine =
* f.initiateListParsing("com.whatever.YourOwnParser", directory);
*
* while (engine.hasNext()) {
* FTPFile[] files = engine.getNext(25); // "page size" you want
* //do whatever you want with these files, display them, etc.
* //expensive FTPFile objects not created until needed.
* }
* </pre>
* <p>
* Paged access, using a parser accessible by auto-detect:
* <pre>
* MyFTPClient f=MyFTPClient();
* f.connect(server);
* f.login(username, password);
* FTPListParseEngine engine = f.initiateListParsing(directory);
*
* while (engine.hasNext()) {
* FTPFile[] files = engine.getNext(25); // "page size" you want
* //do whatever you want with these files, display them, etc.
* //expensive FTPFile objects not created until needed.
* }
* </pre>
* <p>
* For examples of using MyFTPClient on servers whose directory listings
* <ul>
* <li>use languages other than English</li>
* <li>use date formats other than the American English "standard" <code>MM d yyyy</code></li>
* <li>are in different timezones and you need accurate timestamps for dependency checking
* as in Ant</li>
* </ul>see {@link FTPClientConfig FTPClientConfig}.
* <p>
* @author Daniel F. Savarese
* @author Rory Winston
* @see FTP
* @see FTPConnectionClosedException
* @see FTPFileEntryParser
* @see FTPFileEntryParserFactory
* @see DefaultFTPFileEntryParserFactory
* @see FTPClientConfig
*
* @see org.apache.commons.net.MalformedServerReplyException
**/
public class MyFTPClient extends FTP
implements Configurable
{
/***
* A constant indicating the FTP session is expecting all transfers
* to occur between the client (local) and server and that the server
* should connect to the client's data port to initiate a data transfer.
* This is the default data connection mode when and MyFTPClient instance
* is created.
***/
public static final int ACTIVE_LOCAL_DATA_CONNECTION_MODE = 0;
/***
* A constant indicating the FTP session is expecting all transfers
* to occur between two remote servers and that the server
* the client is connected to should connect to the other server's
* data port to initiate a data transfer.
***/
public static final int ACTIVE_REMOTE_DATA_CONNECTION_MODE = 1;
/***
* A constant indicating the FTP session is expecting all transfers
* to occur between the client (local) and server and that the server
* is in passive mode, requiring the client to connect to the
* server's data port to initiate a transfer.
***/
public static final int PASSIVE_LOCAL_DATA_CONNECTION_MODE = 2;
/***
* A constant indicating the FTP session is expecting all transfers
* to occur between two remote servers and that the server
* the client is connected to is in passive mode, requiring the other
* server to connect to the first server's data port to initiate a data
* transfer.
***/
public static final int PASSIVE_REMOTE_DATA_CONNECTION_MODE = 3;
private int __dataConnectionMode, __dataTimeout;
private int __passivePort;
private String __passiveHost;
private int __fileType, __fileFormat, __fileStructure, __fileTransferMode;
private boolean __remoteVerificationEnabled;
private long __restartOffset;
private FTPFileEntryParserFactory __parserFactory;
private int __bufferSize;
private boolean __listHiddenFiles;
// __systemName is a cached value that should not be referenced directly
// except when assigned in getSystemName and __initDefaults.
private String __systemName;
// __entryParser is a cached value that should not be referenced directly
// except when assigned in listFiles(String, String) and __initDefaults.
private FTPFileEntryParser __entryParser;
private FTPClientConfig __configuration;
/** Pattern for PASV mode responses */
private static String __parms = "\\d{1,3},\\d{1,3},\\d{1,3},\\d{1,3},\\d{1,3},\\d{1,3}";
private static java.util.regex.Pattern __parms_pat;
static {
__parms_pat = java.util.regex.Pattern.compile(__parms);
}
/***
* Default MyFTPClient constructor. Creates a new MyFTPClient instance
* with the data connection mode set to
* <code> ACTIVE_LOCAL_DATA_CONNECTION_MODE </code>, the file type
* set to <code> FTP.ASCII_FILE_TYPE </code>, the
* file format set to <code> FTP.NON_PRINT_TEXT_FORMAT </code>,
* the file structure set to <code> FTP.FILE_STRUCTURE </code>, and
* the transfer mode set to <code> FTP.STREAM_TRANSFER_MODE </code>.
***/
public MyFTPClient()
{
__initDefaults();
__dataTimeout = -1;
__remoteVerificationEnabled = true;
__parserFactory = new DefaultFTPFileEntryParserFactory();
__configuration = null;
__listHiddenFiles = false;
}
private void __initDefaults()
{
__dataConnectionMode = ACTIVE_LOCAL_DATA_CONNECTION_MODE;
__passiveHost = null;
__passivePort = -1;
__fileType = FTP.ASCII_FILE_TYPE;
__fileStructure = FTP.FILE_STRUCTURE;
__fileFormat = FTP.NON_PRINT_TEXT_FORMAT;
__fileTransferMode = FTP.STREAM_TRANSFER_MODE;
__restartOffset = 0;
__systemName = null;
__entryParser = null;
__bufferSize = Util.DEFAULT_COPY_BUFFER_SIZE;
}
private String __parsePathname(String reply)
{
int begin, end;
begin = reply.indexOf('"') + 1;
end = reply.indexOf('"', begin);
return reply.substring(begin, end);
}
private void __parsePassiveModeReply(String reply)
throws MalformedServerReplyException
{
java.util.regex.Matcher m = __parms_pat.matcher(reply);
if (!m.find()) {
throw new MalformedServerReplyException(
"Could not parse passive host information.\nServer Reply: " + reply);
}
reply = m.group();
String parts[] = m.group().split(",");
__passiveHost = parts[0] + '.' + parts[1] + '.' + parts[2] + '.' + parts[3];
try
{
int oct1 = Integer.parseInt(parts[4]);
int oct2 = Integer.parseInt(parts[5]);
__passivePort = (oct1 << 8) | oct2;
}
catch (NumberFormatException e)
{
throw new MalformedServerReplyException(
"Could not parse passive host information.\nServer Reply: " + reply);
}
}
private boolean __storeFile(int command, String remote, InputStream local)
throws IOException
{
OutputStream output;
Socket socket;
if ((socket = _openDataConnection_(command, remote)) == null)
return false;
output = new BufferedOutputStream(socket.getOutputStream(),
getBufferSize()
);
if (__fileType == ASCII_FILE_TYPE)
output = new ToNetASCIIOutputStream(output);
// Treat everything else as binary for now
try
{
Util.copyStream(local, output, getBufferSize(),
CopyStreamEvent.UNKNOWN_STREAM_SIZE, null,
false);
}
catch (IOException e)
{
try
{
socket.close();
}
catch (IOException f)
{}
throw e;
}
output.close();
socket.close();
return completePendingCommand();
}
private OutputStream __storeFileStream(int command, String remote)
throws IOException
{
OutputStream output;
Socket socket;
if ((socket = _openDataConnection_(command, remote)) == null)
return null;
output = socket.getOutputStream();
if (__fileType == ASCII_FILE_TYPE) {
// We buffer ascii transfers because the buffering has to
// be interposed between ToNetASCIIOutputSream and the underlying
// socket output stream. We don't buffer binary transfers
// because we don't want to impose a buffering policy on the
// programmer if possible. Programmers can decide on their
// own if they want to wrap the SocketOutputStream we return
// for file types other than ASCII.
output = new BufferedOutputStream(output,
getBufferSize());
output = new ToNetASCIIOutputStream(output);
}
return new org.apache.commons.net.io.SocketOutputStream(socket, output);
}
/**
* Establishes a data connection with the FTP server, returning
* a Socket for the connection if successful. If a restart
* offset has been set with {@link #setRestartOffset(long)},
* a REST command is issued to the server with the offset as
* an argument before establishing the data connection. Active
* mode connections also cause a local PORT command to be issued.
* <p>
* @param command The text representation of the FTP command to send.
* @param arg The arguments to the FTP command. If this parameter is
* set to null, then the command is sent with no argument.
* @return A Socket corresponding to the established data connection.
* Null is returned if an FTP protocol error is reported at
* any point during the establishment and initialization of
* the connection.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
*/
protected Socket _openDataConnection_(int command, String arg)
throws IOException
{
Socket socket;
if (__dataConnectionMode != ACTIVE_LOCAL_DATA_CONNECTION_MODE &&
__dataConnectionMode != PASSIVE_LOCAL_DATA_CONNECTION_MODE)
return null;
if (__dataConnectionMode == ACTIVE_LOCAL_DATA_CONNECTION_MODE)
{
ServerSocket server;
server = _serverSocketFactory_.createServerSocket(0, 1, getLocalAddress());
if (!FTPReply.isPositiveCompletion(port(getLocalAddress(),
server.getLocalPort())))
{
server.close();
return null;
}
if ((__restartOffset > 0) && !restart(__restartOffset))
{
server.close();
return null;
}
if (!FTPReply.isPositivePreliminary(sendCommand(command, arg)))
{
server.close();
return null;
}
// For now, let's just use the data timeout value for waiting for
// the data connection. It may be desirable to let this be a
// separately configurable value. In any case, we really want
// to allow preventing the accept from blocking indefinitely.
if (__dataTimeout >= 0)
server.setSoTimeout(__dataTimeout);
try {
socket = server.accept();
} finally {
server.close();
}
}
else
{ // We must be in PASSIVE_LOCAL_DATA_CONNECTION_MODE
if (pasv() != FTPReply.ENTERING_PASSIVE_MODE)
return null;
__parsePassiveModeReply(_replyLines.get(_replyLines.size() - 1));
socket = _socketFactory_.createSocket(__passiveHost, __passivePort);
if ((__restartOffset > 0) && !restart(__restartOffset))
{
socket.close();
return null;
}
if (!FTPReply.isPositivePreliminary(sendCommand(command, arg)))
{
socket.close();
return null;
}
}
if (__remoteVerificationEnabled && !verifyRemote(socket))
{
InetAddress host1, host2;
host1 = socket.getInetAddress();
host2 = getRemoteAddress();
socket.close();
throw new IOException(
"Host attempting data connection " + host1.getHostAddress() +
" is not same as server " + host2.getHostAddress());
}
if (__dataTimeout >= 0)
socket.setSoTimeout(__dataTimeout);
return socket;
}
@Override
protected void _connectAction_() throws IOException
{
super._connectAction_();
__initDefaults();
}
/***
* Sets the timeout in milliseconds to use when reading from the
* data connection. This timeout will be set immediately after
* opening the data connection.
* <p>
* @param timeout The default timeout in milliseconds that is used when
* opening a data connection socket.
***/
public void setDataTimeout(int timeout)
{
__dataTimeout = timeout;
}
/**
* set the factory used for parser creation to the supplied factory object.
*
* @param parserFactory
* factory object used to create FTPFileEntryParsers
*
* @see org.apache.commons.net.ftp.parser.FTPFileEntryParserFactory
* @see org.apache.commons.net.ftp.parser.DefaultFTPFileEntryParserFactory
*/
public void setParserFactory(FTPFileEntryParserFactory parserFactory) {
__parserFactory = parserFactory;
}
/***
* Closes the connection to the FTP server and restores
* connection parameters to the default values.
* <p>
* @exception IOException If an error occurs while disconnecting.
***/
@Override
public void disconnect() throws IOException
{
super.disconnect();
__initDefaults();
}
/***
* Enable or disable verification that the remote host taking part
* of a data connection is the same as the host to which the control
* connection is attached. The default is for verification to be
* enabled. You may set this value at any time, whether the
* MyFTPClient is currently connected or not.
* <p>
* @param enable True to enable verification, false to disable verification.
***/
public void setRemoteVerificationEnabled(boolean enable)
{
__remoteVerificationEnabled = enable;
}
/***
* Return whether or not verification of the remote host participating
* in data connections is enabled. The default behavior is for
* verification to be enabled.
* <p>
* @return True if verification is enabled, false if not.
***/
public boolean isRemoteVerificationEnabled()
{
return __remoteVerificationEnabled;
}
/***
* Login to the FTP server using the provided username and password.
* <p>
* @param username The username to login under.
* @param password The password to use.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean login(String username, String password) throws IOException
{
user(username);
if (FTPReply.isPositiveCompletion(_replyCode))
return true;
// If we get here, we either have an error code, or an intermmediate
// reply requesting password.
if (!FTPReply.isPositiveIntermediate(_replyCode))
return false;
return FTPReply.isPositiveCompletion(pass(password));
}
/***
* Login to the FTP server using the provided username, password,
* and account. If no account is required by the server, only
* the username and password, the account information is not used.
* <p>
* @param username The username to login under.
* @param password The password to use.
* @param account The account to use.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean login(String username, String password, String account)
throws IOException
{
user(username);
if (FTPReply.isPositiveCompletion(_replyCode))
return true;
// If we get here, we either have an error code, or an intermmediate
// reply requesting password.
if (!FTPReply.isPositiveIntermediate(_replyCode))
return false;
pass(password);
if (FTPReply.isPositiveCompletion(_replyCode))
return true;
if (!FTPReply.isPositiveIntermediate(_replyCode))
return false;
return FTPReply.isPositiveCompletion(acct(account));
}
/***
* Logout of the FTP server by sending the QUIT command.
* <p>
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean logout() throws IOException
{
return FTPReply.isPositiveCompletion(quit());
}
/***
* Change the current working directory of the FTP session.
* <p>
* @param pathname The new current working directory.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean changeWorkingDirectory(String pathname) throws IOException
{
return FTPReply.isPositiveCompletion(cwd(pathname));
}
/***
* Change to the parent directory of the current working directory.
* <p>
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean changeToParentDirectory() throws IOException
{
return FTPReply.isPositiveCompletion(cdup());
}
/***
* Issue the FTP SMNT command.
* <p>
* @param pathname The pathname to mount.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean structureMount(String pathname) throws IOException
{
return FTPReply.isPositiveCompletion(smnt(pathname));
}
/***
* Reinitialize the FTP session. Not all FTP servers support this
* command, which issues the FTP REIN command.
* <p>
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
boolean reinitialize() throws IOException
{
rein();
if (FTPReply.isPositiveCompletion(_replyCode) ||
(FTPReply.isPositivePreliminary(_replyCode) &&
FTPReply.isPositiveCompletion(getReply())))
{
__initDefaults();
return true;
}
return false;
}
/***
* Set the current data connection mode to
* <code>ACTIVE_LOCAL_DATA_CONNECTION_MODE</code>. No communication
* with the FTP server is conducted, but this causes all future data
* transfers to require the FTP server to connect to the client's
* data port. Additionally, to accommodate differences between socket
* implementations on different platforms, this method causes the
* client to issue a PORT command before every data transfer.
***/
public void enterLocalActiveMode()
{
__dataConnectionMode = ACTIVE_LOCAL_DATA_CONNECTION_MODE;
__passiveHost = null;
__passivePort = -1;
}
/***
* Set the current data connection mode to
* <code> PASSIVE_LOCAL_DATA_CONNECTION_MODE </code>. Use this
* method only for data transfers between the client and server.
* This method causes a PASV command to be issued to the server
* before the opening of every data connection, telling the server to
* open a data port to which the client will connect to conduct
* data transfers. The MyFTPClient will stay in
* <code> PASSIVE_LOCAL_DATA_CONNECTION_MODE </code> until the
* mode is changed by calling some other method such as
* {@link #enterLocalActiveMode enterLocalActiveMode() }
***/
public void enterLocalPassiveMode()
{
__dataConnectionMode = PASSIVE_LOCAL_DATA_CONNECTION_MODE;
// These will be set when just before a data connection is opened
// in _openDataConnection_()
__passiveHost = null;
__passivePort = -1;
}
/***
* Set the current data connection mode to
* <code> ACTIVE_REMOTE_DATA_CONNECTION </code>. Use this method only
* for server to server data transfers. This method issues a PORT
* command to the server, indicating the other server and port to which
* it should connect for data transfers. You must call this method
* before EVERY server to server transfer attempt. The MyFTPClient will
* NOT automatically continue to issue PORT commands. You also
* must remember to call
* {@link #enterLocalActiveMode enterLocalActiveMode() } if you
* wish to return to the normal data connection mode.
* <p>
* @param host The passive mode server accepting connections for data
* transfers.
* @param port The passive mode server's data port.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean enterRemoteActiveMode(InetAddress host, int port)
throws IOException
{
if (FTPReply.isPositiveCompletion(port(host, port)))
{
__dataConnectionMode = ACTIVE_REMOTE_DATA_CONNECTION_MODE;
__passiveHost = null;
__passivePort = -1;
return true;
}
return false;
}
/***
* Set the current data connection mode to
* <code> PASSIVE_REMOTE_DATA_CONNECTION_MODE </code>. Use this
* method only for server to server data transfers.
* This method issues a PASV command to the server, telling it to
* open a data port to which the active server will connect to conduct
* data transfers. You must call this method
* before EVERY server to server transfer attempt. The MyFTPClient will
* NOT automatically continue to issue PASV commands. You also
* must remember to call
* {@link #enterLocalActiveMode enterLocalActiveMode() } if you
* wish to return to the normal data connection mode.
* <p>
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean enterRemotePassiveMode() throws IOException
{
if (pasv() != FTPReply.ENTERING_PASSIVE_MODE)
return false;
__dataConnectionMode = PASSIVE_REMOTE_DATA_CONNECTION_MODE;
__parsePassiveModeReply(_replyLines.get(0));
return true;
}
/***
* Returns the hostname or IP address (in the form of a string) returned
* by the server when entering passive mode. If not in passive mode,
* returns null. This method only returns a valid value AFTER a
* data connection has been opened after a call to
* {@link #enterLocalPassiveMode enterLocalPassiveMode()}.
* This is because MyFTPClient sends a PASV command to the server only
* just before opening a data connection, and not when you call
* {@link #enterLocalPassiveMode enterLocalPassiveMode()}.
* <p>
* @return The passive host name if in passive mode, otherwise null.
***/
public String getPassiveHost()
{
return __passiveHost;
}
/***
* If in passive mode, returns the data port of the passive host.
* This method only returns a valid value AFTER a
* data connection has been opened after a call to
* {@link #enterLocalPassiveMode enterLocalPassiveMode()}.
* This is because MyFTPClient sends a PASV command to the server only
* just before opening a data connection, and not when you call
* {@link #enterLocalPassiveMode enterLocalPassiveMode()}.
* <p>
* @return The data port of the passive server. If not in passive
* mode, undefined.
***/
public int getPassivePort()
{
return __passivePort;
}
/***
* Returns the current data connection mode (one of the
* <code> _DATA_CONNECTION_MODE </code> constants.
* <p>
* @return The current data connection mode (one of the
* <code> _DATA_CONNECTION_MODE </code> constants.
***/
public int getDataConnectionMode()
{
return __dataConnectionMode;
}
/***
* Sets the file type to be transferred. This should be one of
* <code> FTP.ASCII_FILE_TYPE </code>, <code> FTP.BINARY_FILE_TYPE</code>,
* etc. The file type only needs to be set when you want to change the
* type. After changing it, the new type stays in effect until you change
* it again. The default file type is <code> FTP.ASCII_FILE_TYPE </code>
* if this method is never called.
* <p>
* @param fileType The <code> _FILE_TYPE </code> constant indcating the
* type of file.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean setFileType(int fileType) throws IOException
{
if (FTPReply.isPositiveCompletion(type(fileType)))
{
__fileType = fileType;
__fileFormat = FTP.NON_PRINT_TEXT_FORMAT;
return true;
}
return false;
}
/***
* Sets the file type to be transferred and the format. The type should be
* one of <code> FTP.ASCII_FILE_TYPE </code>,
* <code> FTP.BINARY_FILE_TYPE </code>, etc. The file type only needs to
* be set when you want to change the type. After changing it, the new
* type stays in effect until you change it again. The default file type
* is <code> FTP.ASCII_FILE_TYPE </code> if this method is never called.
* The format should be one of the FTP class <code> TEXT_FORMAT </code>
* constants, or if the type is <code> FTP.LOCAL_FILE_TYPE </code>, the
* format should be the byte size for that type. The default format
* is <code> FTP.NON_PRINT_TEXT_FORMAT </code> if this method is never
* called.
* <p>
* @param fileType The <code> _FILE_TYPE </code> constant indcating the
* type of file.
* @param formatOrByteSize The format of the file (one of the
* <code>_FORMAT</code> constants. In the case of
* <code>LOCAL_FILE_TYPE</code>, the byte size.
* <p>
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean setFileType(int fileType, int formatOrByteSize)
throws IOException
{
if (FTPReply.isPositiveCompletion(type(fileType, formatOrByteSize)))
{
__fileType = fileType;
__fileFormat = formatOrByteSize;
return true;
}
return false;
}
/***
* Sets the file structure. The default structure is
* <code> FTP.FILE_STRUCTURE </code> if this method is never called.
* <p>
* @param structure The structure of the file (one of the FTP class
* <code>_STRUCTURE</code> constants).
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean setFileStructure(int structure) throws IOException
{
if (FTPReply.isPositiveCompletion(stru(structure)))
{
__fileStructure = structure;
return true;
}
return false;
}
/***
* Sets the transfer mode. The default transfer mode
* <code> FTP.STREAM_TRANSFER_MODE </code> if this method is never called.
* <p>
* @param mode The new transfer mode to use (one of the FTP class
* <code>_TRANSFER_MODE</code> constants).
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean setFileTransferMode(int mode) throws IOException
{
if (FTPReply.isPositiveCompletion(mode(mode)))
{
__fileTransferMode = mode;
return true;
}
return false;
}
/***
* Initiate a server to server file transfer. This method tells the
* server to which the client is connected to retrieve a given file from
* the other server.
* <p>
* @param filename The name of the file to retrieve.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean remoteRetrieve(String filename) throws IOException
{
if (__dataConnectionMode == ACTIVE_REMOTE_DATA_CONNECTION_MODE ||
__dataConnectionMode == PASSIVE_REMOTE_DATA_CONNECTION_MODE)
return FTPReply.isPositivePreliminary(retr(filename));
return false;
}
/***
* Initiate a server to server file transfer. This method tells the
* server to which the client is connected to store a file on
* the other server using the given filename. The other server must
* have had a <code> remoteRetrieve </code> issued to it by another
* MyFTPClient.
* <p>
* @param filename The name to call the file that is to be stored.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean remoteStore(String filename) throws IOException
{
if (__dataConnectionMode == ACTIVE_REMOTE_DATA_CONNECTION_MODE ||
__dataConnectionMode == PASSIVE_REMOTE_DATA_CONNECTION_MODE)
return FTPReply.isPositivePreliminary(stor(filename));
return false;
}
/***
* Initiate a server to server file transfer. This method tells the
* server to which the client is connected to store a file on
* the other server using a unique filename based on the given filename.
* The other server must have had a <code> remoteRetrieve </code> issued
* to it by another MyFTPClient.
* <p>
* @param filename The name on which to base the filename of the file
* that is to be stored.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean remoteStoreUnique(String filename) throws IOException
{
if (__dataConnectionMode == ACTIVE_REMOTE_DATA_CONNECTION_MODE ||
__dataConnectionMode == PASSIVE_REMOTE_DATA_CONNECTION_MODE)
return FTPReply.isPositivePreliminary(stou(filename));
return false;
}
/***
* Initiate a server to server file transfer. This method tells the
* server to which the client is connected to store a file on
* the other server using a unique filename.
* The other server must have had a <code> remoteRetrieve </code> issued
* to it by another MyFTPClient. Many FTP servers require that a base
* filename be given from which the unique filename can be derived. For
* those servers use the other version of <code> remoteStoreUnique</code>
* <p>
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean remoteStoreUnique() throws IOException
{
if (__dataConnectionMode == ACTIVE_REMOTE_DATA_CONNECTION_MODE ||
__dataConnectionMode == PASSIVE_REMOTE_DATA_CONNECTION_MODE)
return FTPReply.isPositivePreliminary(stou());
return false;
}
// For server to server transfers
/***
* Initiate a server to server file transfer. This method tells the
* server to which the client is connected to append to a given file on
* the other server. The other server must have had a
* <code> remoteRetrieve </code> issued to it by another MyFTPClient.
* <p>
* @param filename The name of the file to be appended to, or if the
* file does not exist, the name to call the file being stored.
* <p>
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean remoteAppend(String filename) throws IOException
{
if (__dataConnectionMode == ACTIVE_REMOTE_DATA_CONNECTION_MODE ||
__dataConnectionMode == PASSIVE_REMOTE_DATA_CONNECTION_MODE)
return FTPReply.isPositivePreliminary(stor(filename));
return false;
}
/***
* There are a few MyFTPClient methods that do not complete the
* entire sequence of FTP commands to complete a transaction. These
* commands require some action by the programmer after the reception
* of a positive intermediate command. After the programmer's code
* completes its actions, it must call this method to receive
* the completion reply from the server and verify the success of the
* entire transaction.
* <p>
* For example,
* <pre>
* InputStream input;
* OutputStream output;
* input = new FileInputStream("foobaz.txt");
* output = ftp.storeFileStream("foobar.txt")
* if(!FTPReply.isPositiveIntermediate(ftp.getReplyCode())) {
* input.close();
* output.close();
* ftp.logout();
* ftp.disconnect();
* System.err.println("File transfer failed.");
* System.exit(1);
* }
* Util.copyStream(input, output);
* input.close();
* output.close();
* // Must call completePendingCommand() to finish command.
* if(!ftp.completePendingCommand()) {
* ftp.logout();
* ftp.disconnect();
* System.err.println("File transfer failed.");
* System.exit(1);
* }
* </pre>
* <p>
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean completePendingCommand() throws IOException
{
return FTPReply.isPositiveCompletion(getReply());
}
/***
* Retrieves a named file from the server and writes it to the given
* OutputStream. This method does NOT close the given OutputStream.
* If the current file type is ASCII, line separators in the file are
* converted to the local representation.
* <p>
* @param remote The name of the remote file.
* @param local The local OutputStream to which to write the file.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception CopyStreamException If an I/O error occurs while actually
* transferring the file. The CopyStreamException allows you to
* determine the number of bytes transferred and the IOException
* causing the error. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean retrieveFile(String remote, OutputStream local)
throws IOException
{
InputStream input;
Socket socket;
if ((socket = _openDataConnection_(FTPCommand.RETR, remote)) == null)
return false;
java.util.zip.CheckedInputStream checkedSocketInputStream = new java.util.zip.CheckedInputStream(socket.getInputStream(), new java.util.zip.CRC32());
java.util.zip.CheckedInputStream checkedBufferedInputStream = new java.util.zip.CheckedInputStream(new BufferedInputStream( checkedSocketInputStream, getBufferSize()), new java.util.zip.CRC32());
input = checkedBufferedInputStream;
if (__fileType == ASCII_FILE_TYPE)
input = new FromNetASCIIInputStream(input);
// Treat everything else as binary for now
try
{
Util.copyStream(input, local, getBufferSize(),
CopyStreamEvent.UNKNOWN_STREAM_SIZE, null,
false);
System.out.println("Socket CRC32: " + checkedSocketInputStream.getChecksum().getValue());
System.out.println("Buffer CRC32: " + checkedBufferedInputStream.getChecksum().getValue());
}
catch (IOException e)
{
try
{
socket.close();
}
catch (IOException f)
{}
throw e;
}
socket.close();
return completePendingCommand();
}
/***
* Returns an InputStream from which a named file from the server
* can be read. If the current file type is ASCII, the returned
* InputStream will convert line separators in the file to
* the local representation. You must close the InputStream when you
* finish reading from it. The InputStream itself will take care of
* closing the parent data connection socket upon being closed. To
* finalize the file transfer you must call
* {@link #completePendingCommand completePendingCommand } and
* check its return value to verify success.
* <p>
* @param remote The name of the remote file.
* @return An InputStream from which the remote file can be read. If
* the data connection cannot be opened (e.g., the file does not
* exist), null is returned (in which case you may check the reply
* code to determine the exact reason for failure).
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public InputStream retrieveFileStream(String remote) throws IOException
{
InputStream input;
Socket socket;
if ((socket = _openDataConnection_(FTPCommand.RETR, remote)) == null)
return null;
input = socket.getInputStream();
if (__fileType == ASCII_FILE_TYPE) {
// We buffer ascii transfers because the buffering has to
// be interposed between FromNetASCIIOutputSream and the underlying
// socket input stream. We don't buffer binary transfers
// because we don't want to impose a buffering policy on the
// programmer if possible. Programmers can decide on their
// own if they want to wrap the SocketInputStream we return
// for file types other than ASCII.
input = new BufferedInputStream(input,
getBufferSize());
input = new FromNetASCIIInputStream(input);
}
return new org.apache.commons.net.io.SocketInputStream(socket, input);
}
/***
* Stores a file on the server using the given name and taking input
* from the given InputStream. This method does NOT close the given
* InputStream. If the current file type is ASCII, line separators in
* the file are transparently converted to the NETASCII format (i.e.,
* you should not attempt to create a special InputStream to do this).
* <p>
* @param remote The name to give the remote file.
* @param local The local InputStream from which to read the file.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception CopyStreamException If an I/O error occurs while actually
* transferring the file. The CopyStreamException allows you to
* determine the number of bytes transferred and the IOException
* causing the error. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean storeFile(String remote, InputStream local)
throws IOException
{
return __storeFile(FTPCommand.STOR, remote, local);
}
/***
* Returns an OutputStream through which data can be written to store
* a file on the server using the given name. If the current file type
* is ASCII, the returned OutputStream will convert line separators in
* the file to the NETASCII format (i.e., you should not attempt to
* create a special OutputStream to do this). You must close the
* OutputStream when you finish writing to it. The OutputStream itself
* will take care of closing the parent data connection socket upon being
* closed. To finalize the file transfer you must call
* {@link #completePendingCommand completePendingCommand } and
* check its return value to verify success.
* <p>
* @param remote The name to give the remote file.
* @return An OutputStream through which the remote file can be written. If
* the data connection cannot be opened (e.g., the file does not
* exist), null is returned (in which case you may check the reply
* code to determine the exact reason for failure).
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public OutputStream storeFileStream(String remote) throws IOException
{
return __storeFileStream(FTPCommand.STOR, remote);
}
/***
* Appends to a file on the server with the given name, taking input
* from the given InputStream. This method does NOT close the given
* InputStream. If the current file type is ASCII, line separators in
* the file are transparently converted to the NETASCII format (i.e.,
* you should not attempt to create a special InputStream to do this).
* <p>
* @param remote The name of the remote file.
* @param local The local InputStream from which to read the data to
* be appended to the remote file.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception CopyStreamException If an I/O error occurs while actually
* transferring the file. The CopyStreamException allows you to
* determine the number of bytes transferred and the IOException
* causing the error. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean appendFile(String remote, InputStream local)
throws IOException
{
return __storeFile(FTPCommand.APPE, remote, local);
}
/***
* Returns an OutputStream through which data can be written to append
* to a file on the server with the given name. If the current file type
* is ASCII, the returned OutputStream will convert line separators in
* the file to the NETASCII format (i.e., you should not attempt to
* create a special OutputStream to do this). You must close the
* OutputStream when you finish writing to it. The OutputStream itself
* will take care of closing the parent data connection socket upon being
* closed. To finalize the file transfer you must call
* {@link #completePendingCommand completePendingCommand } and
* check its return value to verify success.
* <p>
* @param remote The name of the remote file.
* @return An OutputStream through which the remote file can be appended.
* If the data connection cannot be opened (e.g., the file does not
* exist), null is returned (in which case you may check the reply
* code to determine the exact reason for failure).
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public OutputStream appendFileStream(String remote) throws IOException
{
return __storeFileStream(FTPCommand.APPE, remote);
}
/***
* Stores a file on the server using a unique name derived from the
* given name and taking input
* from the given InputStream. This method does NOT close the given
* InputStream. If the current file type is ASCII, line separators in
* the file are transparently converted to the NETASCII format (i.e.,
* you should not attempt to create a special InputStream to do this).
* <p>
* @param remote The name on which to base the unique name given to
* the remote file.
* @param local The local InputStream from which to read the file.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception CopyStreamException If an I/O error occurs while actually
* transferring the file. The CopyStreamException allows you to
* determine the number of bytes transferred and the IOException
* causing the error. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean storeUniqueFile(String remote, InputStream local)
throws IOException
{
return __storeFile(FTPCommand.STOU, remote, local);
}
/***
* Returns an OutputStream through which data can be written to store
* a file on the server using a unique name derived from the given name.
* If the current file type
* is ASCII, the returned OutputStream will convert line separators in
* the file to the NETASCII format (i.e., you should not attempt to
* create a special OutputStream to do this). You must close the
* OutputStream when you finish writing to it. The OutputStream itself
* will take care of closing the parent data connection socket upon being
* closed. To finalize the file transfer you must call
* {@link #completePendingCommand completePendingCommand } and
* check its return value to verify success.
* <p>
* @param remote The name on which to base the unique name given to
* the remote file.
* @return An OutputStream through which the remote file can be written. If
* the data connection cannot be opened (e.g., the file does not
* exist), null is returned (in which case you may check the reply
* code to determine the exact reason for failure).
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public OutputStream storeUniqueFileStream(String remote) throws IOException
{
return __storeFileStream(FTPCommand.STOU, remote);
}
/**
* Stores a file on the server using a unique name assigned by the
* server and taking input from the given InputStream. This method does
* NOT close the given
* InputStream. If the current file type is ASCII, line separators in
* the file are transparently converted to the NETASCII format (i.e.,
* you should not attempt to create a special InputStream to do this).
* <p>
* @param local The local InputStream from which to read the file.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception CopyStreamException If an I/O error occurs while actually
* transferring the file. The CopyStreamException allows you to
* determine the number of bytes transferred and the IOException
* causing the error. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
*/
public boolean storeUniqueFile(InputStream local) throws IOException
{
return __storeFile(FTPCommand.STOU, null, local);
}
/**
* Returns an OutputStream through which data can be written to store
* a file on the server using a unique name assigned by the server.
* If the current file type
* is ASCII, the returned OutputStream will convert line separators in
* the file to the NETASCII format (i.e., you should not attempt to
* create a special OutputStream to do this). You must close the
* OutputStream when you finish writing to it. The OutputStream itself
* will take care of closing the parent data connection socket upon being
* closed. To finalize the file transfer you must call
* {@link #completePendingCommand completePendingCommand } and
* check its return value to verify success.
* <p>
* @return An OutputStream through which the remote file can be written. If
* the data connection cannot be opened (e.g., the file does not
* exist), null is returned (in which case you may check the reply
* code to determine the exact reason for failure).
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
*/
public OutputStream storeUniqueFileStream() throws IOException
{
return __storeFileStream(FTPCommand.STOU, null);
}
/***
* Reserve a number of bytes on the server for the next file transfer.
* <p>
* @param bytes The number of bytes which the server should allocate.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean allocate(int bytes) throws IOException
{
return FTPReply.isPositiveCompletion(allo(bytes));
}
/**
* Reserve space on the server for the next file transfer.
* <p>
* @param bytes The number of bytes which the server should allocate.
* @param recordSize The size of a file record.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
*/
public boolean allocate(int bytes, int recordSize) throws IOException
{
return FTPReply.isPositiveCompletion(allo(bytes, recordSize));
}
/***
* Restart a <code>STREAM_TRANSFER_MODE</code> file transfer starting
* from the given offset. This will only work on FTP servers supporting
* the REST comand for the stream transfer mode. However, most FTP
* servers support this. Any subsequent file transfer will start
* reading or writing the remote file from the indicated offset.
* <p>
* @param offset The offset into the remote file at which to start the
* next file transfer.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
private boolean restart(long offset) throws IOException
{
__restartOffset = 0;
return FTPReply.isPositiveIntermediate(rest(Long.toString(offset)));
}
/***
* Sets the restart offset. The restart command is sent to the server
* only before sending the file transfer command. When this is done,
* the restart marker is reset to zero.
* <p>
* @param offset The offset into the remote file at which to start the
* next file transfer. This must be a value greater than or
* equal to zero.
***/
public void setRestartOffset(long offset)
{
if (offset >= 0)
__restartOffset = offset;
}
/***
* Fetches the restart offset.
* <p>
* @return offset The offset into the remote file at which to start the
* next file transfer.
***/
public long getRestartOffset()
{
return __restartOffset;
}
/***
* Renames a remote file.
* <p>
* @param from The name of the remote file to rename.
* @param to The new name of the remote file.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean rename(String from, String to) throws IOException
{
if (!FTPReply.isPositiveIntermediate(rnfr(from)))
return false;
return FTPReply.isPositiveCompletion(rnto(to));
}
/***
* Abort a transfer in progress.
* <p>
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean abort() throws IOException
{
return FTPReply.isPositiveCompletion(abor());
}
/***
* Deletes a file on the FTP server.
* <p>
* @param pathname The pathname of the file to be deleted.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean deleteFile(String pathname) throws IOException
{
return FTPReply.isPositiveCompletion(dele(pathname));
}
/***
* Removes a directory on the FTP server (if empty).
* <p>
* @param pathname The pathname of the directory to remove.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean removeDirectory(String pathname) throws IOException
{
return FTPReply.isPositiveCompletion(rmd(pathname));
}
/***
* Creates a new subdirectory on the FTP server in the current directory
* (if a relative pathname is given) or where specified (if an absolute
* pathname is given).
* <p>
* @param pathname The pathname of the directory to create.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean makeDirectory(String pathname) throws IOException
{
return FTPReply.isPositiveCompletion(mkd(pathname));
}
/***
* Returns the pathname of the current working directory.
* <p>
* @return The pathname of the current working directory. If it cannot
* be obtained, returns null.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public String printWorkingDirectory() throws IOException
{
if (pwd() != FTPReply.PATHNAME_CREATED)
return null;
return __parsePathname(_replyLines.get( _replyLines.size() - 1));
}
/**
* Send a site specific command.
* @param arguments The site specific command and arguments.
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
*/
public boolean sendSiteCommand(String arguments) throws IOException
{
return FTPReply.isPositiveCompletion(site(arguments));
}
/***
* Fetches the system type name from the server and returns the string.
* This value is cached for the duration of the connection after the
* first call to this method. In other words, only the first time
* that you invoke this method will it issue a SYST command to the
* FTP server. MyFTPClient will remember the value and return the
* cached value until a call to disconnect.
* <p>
* @return The system type name obtained from the server. null if the
* information could not be obtained.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public String getSystemName() throws IOException
{
//if (syst() == FTPReply.NAME_SYSTEM_TYPE)
// Technically, we should expect a NAME_SYSTEM_TYPE response, but
// in practice FTP servers deviate, so we soften the condition to
// a positive completion.
if (__systemName == null && FTPReply.isPositiveCompletion(syst()))
__systemName = _replyLines.get(_replyLines.size() - 1).substring(4);
return __systemName;
}
/***
* Fetches the system help information from the server and returns the
* full string.
* <p>
* @return The system help string obtained from the server. null if the
* information could not be obtained.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public String listHelp() throws IOException
{
if (FTPReply.isPositiveCompletion(help()))
return getReplyString();
return null;
}
/**
* Fetches the help information for a given command from the server and
* returns the full string.
* @param command The command on which to ask for help.
* @return The command help string obtained from the server. null if the
* information could not be obtained.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
*/
public String listHelp(String command) throws IOException
{
if (FTPReply.isPositiveCompletion(help(command)))
return getReplyString();
return null;
}
/***
* Sends a NOOP command to the FTP server. This is useful for preventing
* server timeouts.
* <p>
* @return True if successfully completed, false if not.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public boolean sendNoOp() throws IOException
{
return FTPReply.isPositiveCompletion(noop());
}
/***
* Obtain a list of filenames in a directory (or just the name of a given
* file, which is not particularly useful). This information is obtained
* through the NLST command. If the given pathname is a directory and
* contains no files, a zero length array is returned only
* if the FTP server returned a positive completion code, otherwise
* null is returned (the FTP server returned a 550 error No files found.).
* If the directory is not empty, an array of filenames in the directory is
* returned. If the pathname corresponds
* to a file, only that file will be listed. The server may or may not
* expand glob expressions.
* <p>
* @param pathname The file or directory to list.
* @return The list of filenames contained in the given path. null if
* the list could not be obtained. If there are no filenames in
* the directory, a zero-length array is returned.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public String[] listNames(String pathname) throws IOException
{
String line;
Socket socket;
BufferedReader reader;
ArrayList<String> results;
if ((socket = _openDataConnection_(FTPCommand.NLST, pathname)) == null)
return null;
reader =
new BufferedReader(new InputStreamReader(socket.getInputStream(), getControlEncoding()));
results = new ArrayList<String>();
while ((line = reader.readLine()) != null)
results.add(line);
reader.close();
socket.close();
if (completePendingCommand())
{
String[] names = new String[ results.size() ];
return results.toArray(names);
}
return null;
}
/***
* Obtain a list of filenames in the current working directory
* This information is obtained through the NLST command. If the current
* directory contains no files, a zero length array is returned only
* if the FTP server returned a positive completion code, otherwise,
* null is returned (the FTP server returned a 550 error No files found.).
* If the directory is not empty, an array of filenames in the directory is
* returned.
* <p>
* @return The list of filenames contained in the current working
* directory. null if the list could not be obtained.
* If there are no filenames in the directory, a zero-length array
* is returned.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public String[] listNames() throws IOException
{
return listNames(null);
}
/**
* Using the default system autodetect mechanism, obtain a
* list of file information for the current working directory
* or for just a single file.
* <p>
* This information is obtained through the LIST command. The contents of
* the returned array is determined by the<code> FTPFileEntryParser </code>
* used.
* <p>
* @param pathname The file or directory to list. Since the server may
* or may not expand glob expressions, using them here
* is not recommended and may well cause this method to
* fail.
*
* @return The list of file information contained in the given path in
* the format determined by the autodetection mechanism
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection
* as a result of the client being idle or some other
* reason causing the server to send FTP reply code 421.
* This exception may be caught either as an IOException
* or independently as itself.
* @exception IOException
* If an I/O error occurs while either sending a
* command to the server or receiving a reply
* from the server.
* @exception ParserInitializationException
* Thrown if the parserKey parameter cannot be
* resolved by the selected parser factory.
* In the DefaultFTPEntryParserFactory, this will
* happen when parserKey is neither
* the fully qualified class name of a class
* implementing the interface
* org.apache.commons.net.ftp.FTPFileEntryParser
* nor a string containing one of the recognized keys
* mapping to such a parser or if class loader
* security issues prevent its being loaded.
* @see org.apache.commons.net.ftp.parser.DefaultFTPFileEntryParserFactory
* @see org.apache.commons.net.ftp.parser.FTPFileEntryParserFactory
* @see org.apache.commons.net.ftp.FTPFileEntryParser
*/
public FTPFile[] listFiles(String pathname)
throws IOException
{
String key = null;
FTPListParseEngine engine =
initiateListParsing(key, pathname);
return engine.getFiles();
}
/**
* Using the default system autodetect mechanism, obtain a
* list of file information for the current working directory.
* <p>
* This information is obtained through the LIST command. The contents of
* the returned array is determined by the<code> FTPFileEntryParser </code>
* used.
* <p>
* @return The list of file information contained in the current directory
* in the format determined by the autodetection mechanism.
* <p><b>
* NOTE:</b> This array may contain null members if any of the
* individual file listings failed to parse. The caller should
* check each entry for null before referencing it.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection
* as a result of the client being idle or some other
* reason causing the server to send FTP reply code 421.
* This exception may be caught either as an IOException
* or independently as itself.
* @exception IOException
* If an I/O error occurs while either sending a
* command to the server or receiving a reply
* from the server.
* @exception ParserInitializationException
* Thrown if the parserKey parameter cannot be
* resolved by the selected parser factory.
* In the DefaultFTPEntryParserFactory, this will
* happen when parserKey is neither
* the fully qualified class name of a class
* implementing the interface
* org.apache.commons.net.ftp.FTPFileEntryParser
* nor a string containing one of the recognized keys
* mapping to such a parser or if class loader
* security issues prevent its being loaded.
* @see org.apache.commons.net.ftp.parser.DefaultFTPFileEntryParserFactory
* @see org.apache.commons.net.ftp.parser.FTPFileEntryParserFactory
* @see org.apache.commons.net.ftp.FTPFileEntryParser
*/
public FTPFile[] listFiles()
throws IOException
{
return listFiles((String) null);
}
/**
* Using the default autodetect mechanism, initialize an FTPListParseEngine
* object containing a raw file information for the current working
* directory on the server
* This information is obtained through the LIST command. This object
* is then capable of being iterated to return a sequence of FTPFile
* objects with information filled in by the
* <code> FTPFileEntryParser </code> used.
* <p>
* This method differs from using the listFiles() methods in that
* expensive FTPFile objects are not created until needed which may be
* an advantage on large lists.
*
* @return A FTPListParseEngine object that holds the raw information and
* is capable of providing parsed FTPFile objects, one for each file
* containing information contained in the given path in the format
* determined by the <code> parser </code> parameter. Null will be
* returned if a data connection cannot be opened. If the current working
* directory contains no files, an empty array will be the return.
*
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException
* If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
* @exception ParserInitializationException
* Thrown if the autodetect mechanism cannot
* resolve the type of system we are connected with.
* @see FTPListParseEngine
*/
public FTPListParseEngine initiateListParsing()
throws IOException
{
return initiateListParsing((String) null);
}
/**
* Using the default autodetect mechanism, initialize an FTPListParseEngine
* object containing a raw file information for the supplied directory.
* This information is obtained through the LIST command. This object
* is then capable of being iterated to return a sequence of FTPFile
* objects with information filled in by the
* <code> FTPFileEntryParser </code> used.
* <p>
* The server may or may not expand glob expressions. You should avoid
* using glob expressions because the return format for glob listings
* differs from server to server and will likely cause this method to fail.
* <p>
* This method differs from using the listFiles() methods in that
* expensive FTPFile objects are not created until needed which may be
* an advantage on large lists.
* <p>
* <pre>
* MyFTPClient f=MyFTPClient();
* f.connect(server);
* f.login(username, password);
* FTPListParseEngine engine = f.initiateListParsing(directory);
*
* while (engine.hasNext()) {
* FTPFile[] files = engine.getNext(25); // "page size" you want
* //do whatever you want with these files, display them, etc.
* //expensive FTPFile objects not created until needed.
* }
* </pre>
*
* @return A FTPListParseEngine object that holds the raw information and
* is capable of providing parsed FTPFile objects, one for each file
* containing information contained in the given path in the format
* determined by the <code> parser </code> parameter. Null will be
* returned if a data connection cannot be opened. If the current working
* directory contains no files, an empty array will be the return.
*
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException
* If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
* @exception ParserInitializationException
* Thrown if the autodetect mechanism cannot
* resolve the type of system we are connected with.
* @see FTPListParseEngine
*/
public FTPListParseEngine initiateListParsing(
String pathname)
throws IOException
{
String key = null;
return initiateListParsing(key, pathname);
}
/**
* Using the supplied parser key, initialize an FTPListParseEngine
* object containing a raw file information for the supplied directory.
* This information is obtained through the LIST command. This object
* is then capable of being iterated to return a sequence of FTPFile
* objects with information filled in by the
* <code> FTPFileEntryParser </code> used.
* <p>
* The server may or may not expand glob expressions. You should avoid
* using glob expressions because the return format for glob listings
* differs from server to server and will likely cause this method to fail.
* <p>
* This method differs from using the listFiles() methods in that
* expensive FTPFile objects are not created until needed which may be
* an advantage on large lists.
*
* @param parserKey A string representing a designated code or fully-qualified
* class name of an <code> FTPFileEntryParser </code> that should be
* used to parse each server file listing.
*
* @return A FTPListParseEngine object that holds the raw information and
* is capable of providing parsed FTPFile objects, one for each file
* containing information contained in the given path in the format
* determined by the <code> parser </code> parameter. Null will be
* returned if a data connection cannot be opened. If the current working
* directory contains no files, an empty array will be the return.
*
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException
* If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
* @exception ParserInitializationException
* Thrown if the parserKey parameter cannot be
* resolved by the selected parser factory.
* In the DefaultFTPEntryParserFactory, this will
* happen when parserKey is neither
* the fully qualified class name of a class
* implementing the interface
* org.apache.commons.net.ftp.FTPFileEntryParser
* nor a string containing one of the recognized keys
* mapping to such a parser or if class loader
* security issues prevent its being loaded.
* @see FTPListParseEngine
*/
public FTPListParseEngine initiateListParsing(
String parserKey, String pathname)
throws IOException
{
// We cache the value to avoid creation of a new object every
// time a file listing is generated.
if(__entryParser == null) {
if (null != parserKey) {
// if a parser key was supplied in the parameters,
// use that to create the paraser
__entryParser =
__parserFactory.createFileEntryParser(parserKey);
} else {
// if no parserKey was supplied, check for a configuration
// in the params, and if non-null, use that.
if (null != __configuration) {
__entryParser =
__parserFactory.createFileEntryParser(__configuration);
} else {
// if a parserKey hasn't been supplied, and a configuration
// hasn't been supplied, then autodetect by calling
// the SYST command and use that to choose the parser.
__entryParser =
__parserFactory.createFileEntryParser(getSystemName());
}
}
}
return initiateListParsing(__entryParser, pathname);
}
/**
* private method through which all listFiles() and
* initiateListParsing methods pass once a parser is determined.
*
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException
* If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
* @see FTPListParseEngine
*/
private FTPListParseEngine initiateListParsing(
FTPFileEntryParser parser, String pathname)
throws IOException
{
Socket socket;
FTPListParseEngine engine = new FTPListParseEngine(parser);
if ((socket = _openDataConnection_(FTPCommand.LIST, getListArguments(pathname))) == null)
{
return engine;
}
try {
engine.readServerList(socket.getInputStream(), getControlEncoding());
}
finally {
socket.close();
}
completePendingCommand();
return engine;
}
/**
* @since 2.0
*/
protected String getListArguments(String pathname) {
if (getListHiddenFiles())
{
StringBuffer sb = new StringBuffer(pathname.length() + 3);
sb.append("-a ");
sb.append(pathname);
return sb.toString();
}
return pathname;
}
/***
* Issue the FTP STAT command to the server.
* <p>
* @return The status information returned by the server.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public String getStatus() throws IOException
{
if (FTPReply.isPositiveCompletion(stat()))
return getReplyString();
return null;
}
/***
* Issue the FTP STAT command to the server for a given pathname. This
* should produce a listing of the file or directory.
* <p>
* @return The status information returned by the server.
* @exception FTPConnectionClosedException
* If the FTP server prematurely closes the connection as a result
* of the client being idle or some other reason causing the server
* to send FTP reply code 421. This exception may be caught either
* as an IOException or independently as itself.
* @exception IOException If an I/O error occurs while either sending a
* command to the server or receiving a reply from the server.
***/
public String getStatus(String pathname) throws IOException
{
if (FTPReply.isPositiveCompletion(stat(pathname)))
return getReplyString();
return null;
}
/**
* Issue the FTP MDTM command (not supported by all servers to retrieve the last
* modification time of a file. The modification string should be in the
* ISO 3077 form "YYYYMMDDhhmmss(.xxx)?". The timestamp represented should also be in
* GMT, but not all FTP servers honour this.
*
* @param pathname The file path to query.
* @return A string representing the last file modification time in <code>YYYYMMDDhhmmss</code> format.
* @throws IOException if an I/O error occurs.
* @since 2.0
*/
public String getModificationTime(String pathname) throws IOException {
if (FTPReply.isPositiveCompletion(mdtm(pathname)))
return getReplyString();
return null;
}
/**
* Set the internal buffer size.
*
* @param bufSize The size of the buffer
*/
public void setBufferSize(int bufSize) {
__bufferSize = bufSize;
}
/**
* Retrieve the current internal buffer size.
* @return The current buffer size.
*/
public int getBufferSize() {
return __bufferSize;
}
/**
* Implementation of the {@link Configurable Configurable} interface.
* In the case of this class, configuring merely makes the config object available for the
* factory methods that construct parsers.
* @param config {@link FTPClientConfig FTPClientConfig} object used to
* provide non-standard configurations to the parser.
* @since 1.4
*/
public void configure(FTPClientConfig config) {
this.__configuration = config;
}
/**
* You can set this to true if you would like to get hidden files when {@link #listFiles} too.
* A <code>LIST -a</code> will be issued to the ftp server.
* It depends on your ftp server if you need to call this method, also dont expect to get rid
* of hidden files if you call this method with "false".
*
* @param listHiddenFiles true if hidden files should be listed
* @since 2.0
*/
public void setListHiddenFiles(boolean listHiddenFiles) {
this.__listHiddenFiles = listHiddenFiles;
}
/**
* @see #setListHiddenFiles(boolean)
* @return the current state
* @since 2.0
*/
public boolean getListHiddenFiles() {
return this.__listHiddenFiles;
}
static Logger log = Logger.getLogger(MyFTPClient.class.getName());
}
/* Emacs configuration
* Local variables: **
* mode: java **
* c-basic-offset: 4 **
* indent-tabs-mode: nil **
* End: **
*/
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment