Skip to content

Instantly share code, notes, and snippets.

@curtisz
Created August 21, 2018 08:24
Show Gist options
  • Save curtisz/9af66b575fb7288f1bf1d6b32eb3db64 to your computer and use it in GitHub Desktop.
Save curtisz/9af66b575fb7288f1bf1d6b32eb3db64 to your computer and use it in GitHub Desktop.
Test various macvlan/ipvlan networking configurations in Docker
#!/bin/sh
#
# Macvlan is merged upstream.
# Test a number of network creates, deletes and runs. Each testing
# different scenarios and configuration options for macvlan and ipvlan
#
# Change eth0 to the link to be used for the parent link `-o parent=`
#
# modified tests / added features from the original gist found here:
# https://github.com/nerdalert/dotfiles/blob/master/ipvlan-macvlan-it.sh
#
# Config Options:
ETH=${ETH:-eth0}
RANDOM_LINK_NAME="foo"
PAUSE_SECONDS=1
# Kernel Version Requirements
MACVLAN_TESTS=1
IPVLAN_TESTS=1
KERNEL_IPVLAN_MIN='4.20'
KERNEL_MACVLAN_MIN='3.9'
KERNEL_MACVLAN_REC='4.0'
KERNEL_VERSION="$( uname -r | cut -d'.' -f1,2 )"
# Expected results (MACVLAN depends on test suites enabled)
EXPECTED_IPVLAN_NETWORKS=32
EXPECTED_MACVLAN_NETWORKS=0
EXPECTED_CONTAINERS=129
EXPECTED_MANUAL_8021Q_LINK=2
command_exists() {
command -v "$@" > /dev/null 2>&1
}
kernel_version_at_least() {
if [ $( echo ${KERNEL_VERSION} | cut -d'.' -f1 ) -lt $( echo "$@" | cut -d'.' -f1 ) ]; then
false
elif [ $( echo ${KERNEL_VERSION} | cut -d'.' -f1 ) -gt $( echo "$@" | cut -d'.' -f1 ) ]; then
true
else
if [ $( echo ${KERNEL_VERSION} | cut -d'.' -f2 ) -lt $( echo "$@" | cut -d'.' -f2 ) ]; then
false
else
true
fi
fi
}
# Ensure docker is running
check_setup() {
if command_exists if command_exists sudo ps -ef | grep docker | awk '{print $2}' && [ -e /var/run/docker.sock ]; then
(set -x $dk '"Docker has been installed"') || true
echo "PASS -----> Docker daemon instance found"
else
echo "FAIL -----> A running Docker daemon was not found, start Docker with 'docker daemon -D'"
exit 1
fi
if kernel_version_at_least ${KERNEL_IPVLAN_MIN}; then
echo "PASS -----> Kernel version (${KERNEL_VERSION}) is at least version 4.20. Enabling IPVLAN tests."
else
echo "WARN -----> IPVLAN tests require kernel version ${KERNEL_IPVLAN_MIN} or higher. The version you are using is ${KERNEL_VERSION}. Disabling IPVLAN tests."
IPVLAN_TESTS=0
fi
if kernel_version_at_least ${KERNEL_MACVLAN_MIN}; then
if kernel_version_at_least ${KERNEL_MACVLAN_REC}; then
echo "PASS -----> Kernel version (${KERNEL_VERSION}) is greater than recommended version (${KERNEL_MACVLAN_REC}) for MACVLAN tests."
else
echo "INFO -----> Kernel version ${KERNEL_MACVLAN_REC} or higher is recommended for MACVLAN functionality. Your kernel version is ${KERNEL_VERSION}. Some functionality of MACVLAN may not work as expected (or at all)."
fi
else
echo "WARN -----> MACVLAN tests require kernel version ${KERNEL_MACVLAN_MIN} or higher. The version you are using is ${KERNEL_VERSION}. Disabling MACVLAN tests."
MACVLAN_TESTS=0
fi
if [ ${MACVLAN_TESTS} -eq 1 ] && [ ${IPVLAN_TESTS} -eq 1 ]; then
EXPECTED_MACVLAN_NETWORKS=22
elif [ ${MACVLAN_TESTS} -eq 1 ]; then
EXPECTED_MACVLAN_NETWORKS=20
EXPECTED_CONTAINERS=43
else
echo "FAIL -----> No tests to perform! Your kernel does not support IPVLAN or MACVLAN operations."
exit 1
fi
LINK_EXISTS=`grep ${ETH} /proc/net/dev`
if [ -n "$LINK_EXISTS" ] ; then
echo "PASS -----> Detected valid interface:[ ${ETH} ] to run the tests."
else
echo "FAIL -----> [ ${ETH} ] device was not found on this host. Specify the interface you wish to use as the macvlan/ipvlan -o host_interface by setting the 'ETH' variable in the script"
exit 1
fi
echo 'WARN -----> Prior to the test, the script will now ensure there are no Docker networks named [ ipnet ] or [ macnet ]'
echo 'INFO -----> To abort deleting those Docker networks hit ctrl^c within the next 5 seconds..'
sleep ${PAUSE_SECONDS}
INIT_LINK_COUNT=$(ip link | grep @${ETH} | wc -l)
final_cleanup
}
# Validate the expected results to the actual results of links, networks and containers
verify_results() {
REAL_LINK_COUNT=$(ip link | grep @${ETH} | wc -l)
ACTUAL_IPVLAN_NETWORKS=$(docker network ls | grep "ipvlan" | wc -l)
ACTUAL_MACVLAN_NETWORKS=$(docker network ls | grep "macvlan" | wc -l)
ACTUAL_CONTAINERS=$(docker ps | grep "debian\|alpine" | wc -l)
ACTUAL_LINK_COUNT=$(ip link | grep @${ETH} | wc -l)
# ((POST_LINK_COUNT =${INIT_LINK_COUNT} + 2)) # Subtract the two manual links for .1q tests
# MANUAL_8021Q_LINK=$(ip link | grep "${ETH}.28\|${ETH}.29" | wc -l)
echo "#########################################################################################"
echo "##################################### TEST RESULTS ######################################"
# The results should be 32 IPVLAN networks created
if [ ${IPVLAN_TESTS} -eq 1 ]; then
if [ ${ACTUAL_IPVLAN_NETWORKS} -eq ${EXPECTED_IPVLAN_NETWORKS} ]
then
echo "PASS ---------> Ipvlan drivers created the proper number of networks, actual:[ ${ACTUAL_IPVLAN_NETWORKS} ]"
echo "PASS ---------> Ipvlan number of Links exist:[ ${ACTUAL_LINK_COUNT} ] ('ip link')"
else
echo "FAIL ---------> Ipvlan drivers created the wrong number of networks, actual:[ ${ACTUAL_IPVLAN_NETWORKS} ] expected [ $EXPECTED_IPVLAN_NETWORKS ]"
echo "FAIL ---------> Ipvlan number of Links exist, actual:[ ${ACTUAL_LINK_COUNT} ] ('ip link')"
fi
fi
# The results should be 22 MACVLAN networks created (or 20 if IPVLAN tests are disabled)
if [ ${MACVLAN_TESTS} -eq 1 ]; then
if [ ${ACTUAL_MACVLAN_NETWORKS} -eq ${EXPECTED_MACVLAN_NETWORKS} ]
then
echo "PASS ---------> Macvlan drivers created the proper number of networks, actual:[ ${ACTUAL_MACVLAN_NETWORKS} ]"
echo "PASS ---------> Macvlan number of Links exist:[ ${ACTUAL_LINK_COUNT} ] ('ip link')"
else
echo "FAIL ---------> Macvlan drivers created the wrong number of networks, actual:[ ${ACTUAL_MACVLAN_NETWORKS} ] expected [ $EXPECTED_MACVLAN_NETWORKS ]"
echo "FAIL ---------> Macvlan number of Links exist, actual:[ ${ACTUAL_LINK_COUNT} ] ('ip link')"
fi
fi
# The container account should be
if [ ${ACTUAL_CONTAINERS} -eq ${EXPECTED_CONTAINERS} ]
then
echo "PASS ---------> Network drivers created the proper number of containers, actual:[ ${ACTUAL_CONTAINERS} ]"
else
echo "FAIL ---------> Network drivers created the wrong number of containers, actual:[ ${ACTUAL_CONTAINERS} ] expected [ $EXPECTED_CONTAINERS ]"
fi
# Validate the manual link created for the custom parent sub-interface name test 'foo.19' was not deleted
if [ ${IPVLAN_TESTS} -eq 1 ]; then
LINK_EXISTS=$( ip link | grep ${RANDOM_LINK_NAME}.19 )
if [ -n "${LINK_EXISTS}" ] ; then
echo "PASS -----> Detected valid custom parent interface test link:[ ${RANDOM_LINK_NAME}.19 ] - tests will clean it up"
else
echo "FAIL -----> The custom link named link:[ ${RANDOM_LINK_NAME}.19 ] is not present and should have been created and not deleted"
fi
fi
echo "#########################################################################################"
echo "#########################################################################################"
}
# Run the actual IT tests. Scripts runs them twice by creating, deleting and repeating that once
run() {
echo 'INFO -----> The following test will create a series of Mavlan and Ipvlan networks and containers'
echo 'INFO -----> After completing the tests, the containers and networks will then be deleted.'
echo 'INFO -----> If you wish to view the containers and networks, hit ctrl^c when prompted to break'
echo 'INFO -----> the script before cleanup. Rerunning the script will cleanup remaining networks'
echo "INFO -----> Beginning network and container creations in 5 seconds..\n"
sleep ${PAUSE_SECONDS}
### Run the following tests
# Macvlan 802.1q sub-interfaces
if [ ${MACVLAN_TESTS} -eq 1 ]; then
macv_8021q
fi
# Ipvlan L2 mode 802.1q sub-interfaces
if [ ${MACVLAN_TESTS} -eq 1 ] && [ ${IPVLAN_TESTS} -eq 1 ]; then
ipv_8021q_l2
fi
# Ipvlan L3 mode 802.1q sub-interfaces
if [ ${IPVLAN_TESTS} -eq 1 ]; then
ipv_8021q_l3
fi
# Macvlan 802.1q multi-subnet networks
if [ ${IPVLAN_TESTS} -eq 1 ]; then
ipv_8021q_multinet_l3
fi
# Ipvlan L2 mode 802.1q multi-subnet networks
if [ ${MACVLAN_TESTS} -eq 1 ]; then
mcv_8021q_multinet
fi
# Ipvlan L3 mode 802.1q multi-subnet networks
if [ ${IPVLAN_TESTS} -eq 1 ]; then
ipv_8021q_multinet_l2
fi
# Macvlan dual stack multi-net
if [ ${MACVLAN_TESTS} -eq 1 ]; then
mcv_dual_stack
fi
# Ipvlan L2 mode dual stack multi-net
if [ ${IPVLAN_TESTS} -eq 1 ]; then
ipv_dual_stack_l2
fi
# Ipvlan L3 mode dual stack multi-net
if [ ${IPVLAN_TESTS} -eq 1 ]; then
ipv_dual_stack_l3
fi
# Macvlan internal network dual stack multi-net
if [ ${MACVLAN_TESTS} -eq 1 ]; then
mcv_internal_dual_stack
fi
# Ipvlan L2 mode internal network dual stack multi-net
if [ ${IPVLAN_TESTS} -eq 1 ]; then
ipv_internal_dual_stack_l2
fi
# Ipvlan L3 mode internal network dual stack multi-net
if [ ${IPVLAN_TESTS} -eq 1 ]; then
ipv_internal_dual_stack_l3
fi
# Macvlan manual 802.1q existing interface
if [ ${MACVLAN_TESTS} -eq 1 ] && [ ${IPVLAN_TESTS} -eq 1 ]; then
mcv_8021q_manual
fi
# Ipvlan L2 mode manual 802.1q existing interface
if [ ${IPVLAN_TESTS} -eq 1 ]; then
ipv_8021q_manual_l2
fi
# Ipvlan L3 mode manual 802.1q existing interface
if [ ${IPVLAN_TESTS} -eq 1 ]; then
ipv_8021q_manual_l3
fi
echo '#########################################################################################'
echo 'INFO: -----> All tests are completed'
echo 'WARN -----> Deleting ALL containers and networks the test created in 5 seconds'
echo 'WARN -----> Hit ctrl^c to abort if you want to view the created networks and links prior to deletion and rerun the script to clean them up.'
sleep ${PAUSE_SECONDS}
}
###################################################
# Macvlan Bridge Mode IPv4 802.1q VLAN Tagged Tests
macv_8021q() {
echo "TEST -----> Macvlan Bridge Mode IPv4 802.1q VLAN Tagged Tests."
### Network exclude eth0 192.168.31.2 address from IPAM with --aux-address
### eth0 in --aux-address=exclude1=192.168.31.2 can be named anything.
docker network create -d macvlan \
--subnet=192.168.31.0/24 \
--aux-address="exclude1=192.168.31.2" \
--gateway=192.168.31.254 \
-o parent=${ETH}.31 macnet31
### Network macvlan with --ip-range
docker network create -d macvlan \
--subnet=192.168.32.0/24 \
--ip-range=192.168.32.128/25 \
--gateway=192.168.32.254 \
-o parent=${ETH}.32 macnet32
### Network w/o explicit mode to default to -o macvlan_mode=bridge VLAN ID:33
docker network create -d macvlan \
--subnet=192.168.33.0/24 \
--gateway=192.168.33.1 \
-o parent=${ETH}.33 macnet33
### Network w/o explicit macvlan_mode=(defaults to bridge)
docker network create -d macvlan \
--subnet=192.168.34.0/24 \
--gateway=192.168.34.1 \
-o parent=${ETH}.34 macnet34
### Network with a GW: ,254 & VLAN ID:35
docker network create -d macvlan \
--subnet=192.168.35.0/24 \
--gateway=192.168.35.254 \
-o parent=${ETH}.35 macnet35
### Network w/o explicit --gateway=(libnetqork ipam defaults to .1)
docker network create -d macvlan \
--subnet=192.168.36.0/24 \
-o parent=${ETH}.36 \
-o macvlan_mode=bridge macnet36
### Network w/ GW: .254, w/o explicit --macvlan_mode
docker network create -d macvlan \
--subnet=192.168.37.0/24 \
--gateway=192.168.37.254 \
-o parent=${ETH}.37 \
-o macvlan_mode=bridge macnet37
### No Gateway specified test (defaults to x.x.x.1 as a gateway)
docker network create -d macvlan \
--subnet=192.168.38.0/24 \
-o parent=${ETH}.38 \
-o macvlan_mode=bridge macnet38
### No Gateway specified test (defaults to x.x.x.1 as a gateway)
docker network create -d macvlan \
--subnet=192.168.39.0/24 \
-o parent=${ETH}.39 \
-o macvlan_mode=bridge macnet39
### Start containers on each network
docker run --net=macnet31 --name=macnet31_test -itd alpine /bin/sh
docker run --net=macnet32 --name=macnet32_test -itd alpine /bin/sh
docker run --net=macnet33 --name=macnet33_test -itd alpine /bin/sh
docker run --net=macnet34 --name=macnet34_test -itd alpine /bin/sh
docker run --net=macnet35 --name=macnet35_test -itd alpine /bin/sh
docker run --net=macnet36 --name=macnet36_test -itd alpine /bin/sh
### Start containers with explicit --ip4 addrs
docker run --net=macnet37 --name=macnet37_test --ip=192.168.37.10 -itd alpine /bin/sh
docker run --net=macnet38 --name=macnet38_test --ip=192.168.38.10 -itd alpine /bin/sh
docker run --net=macnet39 --name=macnet39_test --ip=192.168.39.10 -itd alpine /bin/sh
#
echo "DONE -----> Macvlan Bridge Mode IPv4 802.1q VLAN Tagged Tests"
}
##############################################
# Ipvlan L2 Mode IPv4 802.1q VLAN Tagged Tests
ipv_8021q_l2() {
echo "TEST -----> Ipvlan L2 Mode IPv4 802.1q VLAN Tagged Tests"
### Network exclude eth0 192.168.41.2 address from IPAM with --aux-address
docker network create -d macvlan \
--subnet=192.168.41.0/24 \
--gateway=192.168.41.254 \
--aux-address="exclude_my_host_eth0=192.168.41.2" \
--aux-address="exclude_favorite_ip=192.168.41.3" \
-o parent=${ETH}.41 ipnet41
### Network with --ip-range
docker network create -d macvlan \
--subnet=192.168.42.0/24 \
--ip-range=192.168.42.128/25 \
--gateway=192.168.42.254 \
-o parent=${ETH}.42 ipnet42
### Network w/o explicit mode to default to -o ipvlan_mode=l2 VLAN ID:43
docker network create -d ipvlan \
--subnet=192.168.43.0/24 \
--gateway=192.168.43.1 \
-o parent=${ETH}.43 ipnet43
### Network w/o explicit ipvlan_mode=(defaults to l2 if unspecified)
docker network create -d ipvlan \
--subnet=192.168.44.0/24 \
--gateway=192.168.44.1 \
-o parent=${ETH}.44 ipnet44
### Network with a GW: ,254 & VLAN ID:45
docker network create -d ipvlan \
--subnet=192.168.45.0/24 \
--gateway=192.168.45.254 \
-o parent=${ETH}.45 ipnet45
### Network w/o explicit --gateway=(libnetqork ipam defaults to .1)
docker network create -d ipvlan \
--subnet=192.168.46.0/24 \
-o parent=${ETH}.46 \
-o ipvlan_mode=l2 ipnet46
### Network w/ GW: .254, w/o explicit --ipvlan_mode
docker network create -d ipvlan \
--subnet=192.168.47.0/24 \
--gateway=192.168.47.254 \
-o parent=${ETH}.47 \
-o ipvlan_mode=l2 ipnet47
### No Gateway specified test (defaults to x.x.x.1 as a gateway)
docker network create -d ipvlan \
--subnet=192.168.48.0/24 \
-o parent=${ETH}.48 \
-o ipvlan_mode=l2 ipnet48
### No Gateway specified test (defaults to x.x.x.1 as a gateway)
docker network create -d ipvlan \
--subnet=192.168.49.0/24 \
-o parent=${ETH}.49 \
-o ipvlan_mode=l2 ipnet49
### Network with --ip-range
docker network create -d ipvlan \
--subnet=192.168.40.0/24 \
--ip-range=192.168.40.128/25 \
--gateway=192.168.40.254 \
-o parent=${ETH}.40 ipnet40
### Start containers on each network
docker run --net=ipnet41 --name=ipnet41_test -itd alpine /bin/sh
docker run --net=ipnet42 --name=ipnet42_test -itd alpine /bin/sh
docker run --net=ipnet43 --name=ipnet43_test -itd alpine /bin/sh
docker run --net=ipnet44 --name=ipnet44_test -itd alpine /bin/sh
docker run --net=ipnet45 --name=ipnet45_test -itd alpine /bin/sh
docker run --net=ipnet46 --name=ipnet46_test -itd alpine /bin/sh
### Start containers with explicit --ip4 addrs
docker run --net=ipnet47 --name=ipnet47_test --ip=192.168.47.10 -itd alpine /bin/sh
docker run --net=ipnet48 --name=ipnet48_test --ip=192.168.48.10 -itd alpine /bin/sh
docker run --net=ipnet49 --name=ipnet49_test --ip=192.168.49.10 -itd alpine /bin/sh
#
echo "DONE -----> Ipvlan L2 Mode IPv4 802.1q VLAN Tagged Tests"
}
##############################################
# Ipvlan L3 Mode IPv4 802.1q VLAN Tagged Tests
ipv_8021q_l3() {
echo "TEST -----> Ipvlan L3 Mode IPv4 802.1q VLAN Tagged Tests"
### Network exclude eth0 192.168.52.2 address from IPAM with --aux-address
docker network create -d ipvlan \
--subnet=192.168.52.0/24 \
--gateway=192.168.52.1 \
--aux-address="reserve1=192.168.52.2" \
--aux-address="reserve2=192.168.52.3" \
-o ipvlan_mode=l3 \
-o parent=${ETH}.52 ipnet52
### Gateway is always ignored in L3 mode - default is 'default dev eth(n)'
docker network create -d ipvlan \
--subnet=192.168.53.0/24 \
--gateway=192.168.53.1 \
-o ipvlan_mode=l3 \
-o parent=${ETH}.53 ipnet53
### Network w/o --ip-range
docker network create -d ipvlan \
--subnet=192.168.54.0/24 \
--ip-range=192.168.54.128/25 \
-o ipvlan_mode=l3 \
-o parent=${ETH}.54 ipnet54
### Gateway is always ignored in L3 mode - default is 'default dev eth(n)'
docker network create -d ipvlan \
--subnet=192.168.55.0/24 \
--gateway=192.168.55.254 \
-o ipvlan_mode=l3 \
-o parent=${ETH}.55 ipnet55
### Network w/explicit mode set
docker network create -d ipvlan \
--subnet=192.168.56.0/24 \
-o parent=${ETH}.56 \
-o ipvlan_mode=l3 ipnet56
### Gateway is always ignored in L3 mode - default is 'default dev eth(n)'
docker network create -d ipvlan \
--subnet=192.168.57.0/24 \
--gateway=192.168.57.254 \
-o parent=${ETH}.57 \
-o ipvlan_mode=l3 ipnet57
### Network w/ explicit mode specified
docker network create -d ipvlan \
--subnet=192.168.58.0/24 \
-o parent=${ETH}.58 \
-o ipvlan_mode=l3 ipnet58
### Network w/ explicit mode specified
docker network create -d ipvlan \
--subnet=192.168.59.0/24 \
-o parent=${ETH}.59 \
-o ipvlan_mode=l3 ipnet59
### Start containers on each network
docker run --net=ipnet52 --name=ipnet52_test -itd alpine /bin/sh
docker run --net=ipnet53 --name=ipnet53_test -itd alpine /bin/sh
docker run --net=ipnet54 --name=ipnet54_test -itd alpine /bin/sh
docker run --net=ipnet55 --name=ipnet55_test -itd alpine /bin/sh
docker run --net=ipnet56 --name=ipnet56_test -itd alpine /bin/sh
### Start containers with explicit --ip4 addrs
docker run --net=ipnet57 --name=ipnet57_test --ip=192.168.57.10 -itd alpine /bin/sh
docker run --net=ipnet58 --name=ipnet58_test --ip=192.168.58.10 -itd alpine /bin/sh
docker run --net=ipnet59 --name=ipnet59_test --ip=192.168.59.10 -itd alpine /bin/sh
#
echo "DONE -----> Ipvlan L3 Mode IPv4 802.1q VLAN Tagged Tests"
}
###########################################################
# Macvlan Multi-Subnet 802.1q VLAN Tagged Bridge Mode Tests
mcv_8021q_multinet() {
echo "TEST -----> Macvlan Multi-Subnet 802.1q VLAN Tagged Bridge Mode Tests"
### Create multiple bridge subnets with a gateway of x.x.x.1:
docker network create -d macvlan \
--subnet=192.168.64.0/24 --subnet=192.168.66.0/24 \
--gateway=192.168.64.1 --gateway=192.168.66.1 \
--aux-address="foo=192.168.64.2" \
--aux-address="bar=192.168.66.2" \
-o parent=${ETH}.64 \
-o macvlan_mode=bridge macnet64
### Create multiple bridge subnets with a gateway of x.x.x.254:
docker network create -d macvlan \
--subnet=192.168.65.0/24 --subnet=192.168.67.0/24 \
--gateway=192.168.65.254 --gateway=192.168.67.254 \
-o parent=${ETH}.65 \
-o macvlan_mode=bridge macnet65
### Create multiple bridge subnets without a gateway (libnetwork IPAM will default to x.x.x.1):
docker network create -d macvlan \
--subnet=192.168.70.0/24 --subnet=192.168.72.0/24 \
-o parent=${ETH}.70 \
-o macvlan_mode=bridge macnet70
# Start Containers on network macnet64
docker run --net=macnet64 --name=macnet64_test --ip=192.168.64.10 -itd alpine /bin/sh
docker run --net=macnet64 --name=macnet66_test --ip=192.168.66.10 -itd alpine /bin/sh
docker run --net=macnet64 --ip=192.168.64.11 -itd alpine /bin/sh
docker run --net=macnet64 --ip=192.168.66.11 -itd alpine /bin/sh
docker run --net=macnet64 -itd alpine /bin/sh
# Start Containers on network macnet65
docker run --net=macnet65 --name=macnet65_test --ip=192.168.65.10 -itd alpine /bin/sh
docker run --net=macnet65 --name=macnet67_test --ip=192.168.67.10 -itd alpine /bin/sh
docker run --net=macnet65 --ip=192.168.65.11 -itd alpine /bin/sh
docker run --net=macnet65 --ip=192.168.67.11 -itd alpine /bin/sh
docker run --net=macnet65 -itd alpine /bin/sh
# Start Containers on network macnet70
docker run --net=macnet70 --name=macnet170_test --ip=192.168.70.10 -itd alpine /bin/sh
docker run --net=macnet70 --name=macnet172_test --ip=192.168.72.10 -itd alpine /bin/sh
docker run --net=macnet70 --ip=192.168.70.11 -itd alpine /bin/sh
docker run --net=macnet70 --ip=192.168.72.11 -itd alpine /bin/sh
docker run --net=macnet70 -itd alpine /bin/sh
#
echo "DONE -----> Macvlan Multi-Subnet 802.1q VLAN Tagged Bridge Mode Tests"
}
#######################################################
# Ipvlan Multi-Subnet 802.1q VLAN Tagged L2 Mode Tests
ipv_8021q_multinet_l2() {
echo "TEST -----> Ipvlan Multi-Subnet 802.1q VLAN Tagged L2 Mode Tests"
### Ipvlan l2 mode, VLAN ID:5,
# Gateway left default for one subnet to get default .1 IP
docker network create -d ipvlan \
--subnet=192.168.5.0/24 \
--subnet=192.168.7.0/24 \
--gateway=192.168.5.254 \
-o ipvlan_mode=l2 \
-o parent=${ETH}.5 ipnet5
# Start Containers on network ipnet5
docker run --net=ipnet5 --name=ipnet5_test -itd alpine /bin/sh
docker run --net=ipnet5 --ip=192.168.5.20 -itd alpine /bin/sh
docker run --net=ipnet5 --ip=192.168.7.20 -itd alpine /bin/sh
#
echo "DONE -----> Ipvlan Multi-Subnet 802.1q VLAN Tagged L2 Mode Tests"
}
#######################################################
# Ipvlan Multi-Subnet 802.1q VLAN Tagged L3 Mode Tests
ipv_8021q_multinet_l3() {
echo "TEST -----> Ipvlan Multi-Subnet 802.1q VLAN Tagged L3 Mode Tests"
### Create multiple l3 mode subnets VLAN ID:104
# Gateway is ignored since L3 is always 'default dev eth0'
docker network create -d ipvlan \
--subnet=192.168.104.0/24 --subnet=192.168.106.0/24 \
--gateway=192.168.104.1 --gateway=192.168.106.1 \
-o ipvlan_mode=l3 \
-o parent=${ETH}.104 ipnet104
### Create multiple l3 subnets w/ VLAN ID:104:
docker network create -d ipvlan \
--subnet=192.168.105.0/24 --subnet=192.168.107.0/24 \
-o parent=${ETH}.105 \
-o ipvlan_mode=l3 ipnet105
### Create multiple l3 subnets w/ VLAN ID:110:
docker network create -d ipvlan \
--subnet=192.168.110.0/24 --subnet=192.168.112.0/24 \
-o parent=${ETH}.110 \
-o ipvlan_mode=l3 ipnet110
# Start Containers on network ipnet104
docker run --net=ipnet104 --name=ipnet104_test --ip=192.168.104.10 -itd alpine /bin/sh
docker run --net=ipnet104 --name=ipnet106_test --ip=192.168.106.10 -itd alpine /bin/sh
docker run --net=ipnet104 --ip=192.168.104.11 -itd alpine /bin/sh
docker run --net=ipnet104 --ip=192.168.106.11 -itd alpine /bin/sh
docker run --net=ipnet104 -itd alpine /bin/sh
# Start Containers on network ipnet105
docker run --net=ipnet105 --name=ipnet105_test --ip=192.168.105.10 -itd alpine /bin/sh
docker run --net=ipnet105 --name=ipnet107_test --ip=192.168.107.10 -itd alpine /bin/sh
docker run --net=ipnet105 --ip=192.168.105.11 -itd alpine /bin/sh
docker run --net=ipnet105 --ip=192.168.107.11 -itd alpine /bin/sh
docker run --net=ipnet105 -itd alpine /bin/sh
# Start Containers on network ipnet110
docker run --net=ipnet110 --name=ipnet110_test --ip=192.168.110.10 -itd alpine /bin/sh
docker run --net=ipnet110 --name=ipnet112_test --ip=192.168.112.10 -itd alpine /bin/sh
docker run --net=ipnet110 --ip=192.168.110.11 -itd alpine /bin/sh
docker run --net=ipnet110 --ip=192.168.112.11 -itd alpine /bin/sh
docker run --net=ipnet110 -itd alpine /bin/sh
### Create a .1q trunk attached to a sub-interface parent
docker network create -d ipvlan \
--subnet=192.168.68.0/24 \
--subnet=192.168.69.0/24 \
--gateway=192.168.68.254 \
--gateway=192.168.69.254 \
-o parent=eth0.69 \
-o macvlan_mode=l3 macnet68
# Start Containers
docker run --net=macnet68 --name=macnet68_test -itd alpine /bin/sh
docker run --net=macnet68 --ip=192.168.69.11 -itd alpine /bin/sh
#
echo "DONE -----> Ipvlan Multi-Subnet 802.1q VLAN Tagged L3 Mode Tests"
}
############################################
# Macvlan Bridge Mode V4/V6 Dual Stack Tests
mcv_dual_stack() {
echo "TEST -----> Macvlan Bridge Mode V4/V6 Dual Stack Tests"
### Create multiple ipv4 bridge subnets along with a ipv6 subnet
### Note ipv6 requires an explicit --gateway= in this case fd19::10
docker network create -d macvlan \
--subnet=192.168.216.0/24 --subnet=192.168.218.0/24 \
--gateway=192.168.216.1 --gateway=192.168.218.1 \
--subnet=fd19::/64 --gateway=fd19::10 \
-o parent=${ETH}.218 \
-o macvlan_mode=bridge macnet216
# Start Containers
docker run --net=macnet216 --name=macnet216_test -itd alpine /bin/sh
docker run --net=macnet216 --name=macnet218_test -itd alpine /bin/sh
docker run --net=macnet216 --ip=192.168.216.11 -itd alpine /bin/sh
docker run --net=macnet216 --ip=192.168.218.11 -itd alpine /bin/sh
#
echo "DONE -----> Macvlan Bridge Mode V4/V6 Dual Stack Tests"
}
##############################################
# Ipvlan Ipvlan L2 Mode V4/V6 Dual Stack Tests
ipv_dual_stack_l2() {
echo "TEST -----> Ipvlan Ipvlan L2 Mode V4/V6 Dual Stack Tests"
### Create multiple ipv4 bridge subnets along with a ipv6 subnet
### Note ipv6 requires an explicit --gateway= in this case fd19::10
docker network create -d ipvlan \
--subnet=192.168.213.0/24 --subnet=192.168.215.0/24 \
--gateway=192.168.213.1 --gateway=192.168.215.1 \
--subnet=fd47::/64 --gateway=fd47::10 \
-o parent=${ETH}.213 \
-o macvlan_mode=bridge ipnet213
# Start containers
docker run --net=ipnet213 --name=ipnet213_test -itd alpine /bin/sh
docker run --net=ipnet213 --name=ipnet215_test -itd alpine /bin/sh
docker run --net=ipnet213 --ip=192.168.213.11 -itd alpine /bin/sh
docker run --net=ipnet213 --ip=192.168.215.11 -itd alpine /bin/sh
docker run --net=ipnet213 --ip=192.168.213.12 --ip6=fd47::20 -itd alpine /bin/sh
docker run --net=ipnet213 --ip=192.168.215.12 --ip6=fd47::21 -itd alpine /bin/sh
#
echo "DONE -----> Ipvlan Ipvlan L2 Mode V4/V6 Dual Stack Tests"
}
#######################################
# Ipvlan L3 Mode V4/V6 Dual Stack Tests
ipv_dual_stack_l3() {
echo "TEST -----> Ipvlan L3 Mode V4/V6 Dual Stack Tests"
# Create an IPv6+IPv4 Dual Stack Ipvlan L3 network
# Gateways for both v4 and v6 are set to a dev e.g. 'default dev eth0'
# --aux-address is excluding an address from IPAM on each network
# --ip-range is masking off a sub range in the network for IPAM allocation
# Example results in 192.168.133.2-192.168.133.127 for container addressing
docker network create -d ipvlan \
--subnet=192.168.131.0/24 --subnet=192.168.133.0/24 \
--subnet=fd14::/64 \
--aux-address="exclude1=fd14::2" \
--aux-address="exclude2=192.168.131.2" \
--aux-address="exclude3=192.168.133.2" \
--ip-range=192.168.131.0/25 \
--ip-range=192.168.133.0/25 \
-o parent=${ETH}.131 \
-o ipvlan_mode=l3 ipnet131
# Start containers on the network
docker run --net=ipnet131 -itd alpine /bin/sh
docker run --net=ipnet131 --ip=192.168.131.10 --ip6=fd14::10 -itd alpine /bin/sh
docker run --net=ipnet131 --ip6=fd14::11 -itd alpine /bin/sh
# Create an IPv6+IPv4 Dual Stack Ipvlan L3 network. Same example but verifying the --gateway= are ignored
# Gateway/Nexthop is ignored in L3 mode and eth0 is used instead 'default dev eth0'
docker network create -d ipvlan \
--subnet=192.168.119.0/24 --subnet=192.168.117.0/24 \
--gateway=192.168.119.1 --gateway=192.168.117.1 \
--subnet=fd16::/64 --gateway=fd16::27 \
-o parent=${ETH}.117 \
-o ipvlan_mode=l3 ipnet117
# Start a container on the network
docker run --net=ipnet117 -itd alpine /bin/sh
# Start a second container specifying the v6 address
docker run --net=ipnet117 --ip6=fd16::10 -itd alpine /bin/sh
# Start a third specifying the IPv4 address
docker run --net=ipnet117 --ip=192.168.117.50 -itd alpine /bin/sh
# Start a 4th specifying both the IPv4 and IPv6 addresses
docker run --net=ipnet117 --ip6=fd16::50 --ip=192.168.119.50 -itd alpine /bin/sh
# Mix of v4/v6 subnets some with and some without gateways
# Note, excluded --aux-addresses cannot be assigned at 'docker run'
docker network create -d ipvlan \
--subnet=192.168.214.0/24 --gateway=192.168.214.254 \
--subnet=192.168.217.0/24 --gateway=192.168.217.254 \
--subnet=192.168.219.0/24 \
--subnet=fd17::/64 --gateway=fd17::10 \
--subnet=fd27::/64 --gateway=fd27::10 \
--subnet=fd37::/64 \
-o parent=${ETH}.214 \
--aux-address="foo1=fd17::12" \
--aux-address="foo2=192.168.217.2" \
--aux-address="foo3=192.168.214.2" \
-o ipvlan_mode=l3 ipnet214
# Start containers
docker run --net=ipnet214 --name=ipnet214_test -itd alpine /bin/sh
docker run --net=ipnet214 --name=ipnet217_test -itd alpine /bin/sh
docker run --net=ipnet214 --ip=192.168.214.11 -itd alpine /bin/sh
docker run --net=ipnet214 --ip=192.168.217.11 -itd alpine /bin/sh
docker run --net=ipnet214 --ip=192.168.214.12 --ip6=fd17::14 -itd alpine /bin/sh
docker run --net=ipnet214 --ip=192.168.217.12 --ip6=fd27::11 -itd alpine /bin/sh
docker run --net=ipnet214 --ip=192.168.214.13 --ip6=fd37::12 -itd alpine /bin/sh
docker run --net=ipnet214 --ip=192.168.219.10 --ip6=fd37::10 -itd alpine /bin/sh
#
echo "DONE -----> Ipvlan L3 Mode V4/V6 Dual Stack Tests"
}
#################################################################################
# Macvlan Bridge Mode Dummy Networks without a parent interface being specified
mcv_internal_dual_stack() {
echo "TEST -----> Macvlan Bridge Mode Dummy Networks without a parent interface being specified"
# Without a '-o parent=' is the same as a --internal flag
docker network create -d macvlan \
--subnet=192.168.222.0/24 --subnet=192.168.224.0/24 \
--subnet=fd18::/64 \
--aux-address="exclude1=fd18::2" \
--aux-address="exclude2=192.168.222.2" \
--aux-address="exclude3=192.168.224.2" \
--ip-range=192.168.222.0/25 \
--ip-range=192.168.224.0/25 \
-o macvlan_mode=bridge macnet222
# Start containers on the network
docker run --net=macnet222 -itd alpine /bin/sh
docker run --net=macnet222 --ip=192.168.222.10 --ip6=fd18::10 -itd alpine /bin/sh
docker run --net=macnet222 --ip6=fd18::11 -itd alpine /bin/sh
# Create v4 dummy network w/explicit gw
docker network create -d macvlan \
--subnet=192.168.242.0/24 \
--gateway=192.168.242.254 macnet242
# Start two containers on the network
docker run --net=macnet242 -itd alpine /bin/sh
docker run --net=macnet242 -itd alpine /bin/sh
# Create v6 dummy network w/explicit gw
docker network create -d macvlan \
--subnet=fd28::/64 \
--gateway=fd28::254 macnet240
# Start two containers on the network
docker run --net=macnet240 -itd alpine /bin/sh
docker run --net=macnet240 --ip6=fd28::10 -itd alpine /bin/sh
# Create v4 internal network w/explicit gw
docker network create -d macvlan \
--subnet=192.168.245.0/24 \
--gateway=192.168.245.254 \
macnet245
# Start two containers on the network
docker run --net=macnet245 -itd alpine /bin/sh
docker run --net=macnet245 -itd alpine /bin/sh
# Create network w/ --internal and override --parent
docker network create -d macvlan \
--subnet=192.168.243.0/24 \
--gateway=192.168.243.254 \
macnet243
# Start two containers on the network
docker run --net=macnet243 -itd alpine /bin/sh
docker run --net=macnet243 -itd alpine /bin/sh
# Create network w/ --internal and override --parent
docker network create -d macvlan \
--subnet=192.168.253.0/24 \
--gateway=192.168.253.254 \
--internal macnet253
# Start two containers on the network
docker run --net=macnet253 -itd alpine /bin/sh
docker run --net=macnet253 -itd alpine /bin/sh
# Create network w/ --internal and override --parent
docker network create -d macvlan \
--subnet=192.168.251.0/24 \
--gateway=192.168.251.254 \
macnet251
# Start two containers on the network
docker run --net=macnet251 -itd alpine /bin/sh
docker run --net=macnet251 -itd alpine /bin/sh
#
echo "DONE -----> Macvlan Bridge Mode Dummy Networks without a parent interface being specified"
}
##################################################
# Ipvlan L2 Mode --internal (iface without a parent
# interface being specified e.g. --internal)
ipv_internal_dual_stack_l2() {
echo "TEST -----> Ipvlan L2 Mode --internal (iface without a parent interface being specified, e.g. --internal)"
### Create multiple subnets w/ --internal flag
# verifies -o parent is ignored with --internal
docker network create -d ipvlan \
--subnet=192.168.210.0/24 \
--subnet=192.168.212.0/24 \
--gateway=192.168.210.1 \
--gateway=192.168.212.1 \
-o parent=eth0.210 \
--internal \
-o ipvlan_mode=l2 ipnet210
# Start containers on 192.168.212.0/24
docker run --net=ipnet210 --ip=192.168.210.10 -itd alpine /bin/sh
docker run --net=ipnet210 --name=ipnet210_test --ip=192.168.210.11 -itd alpine /bin/sh
# Start containers on 192.168.210.0/24
docker run --net=ipnet210 --ip=192.168.212.10 -itd alpine /bin/sh
docker run --net=ipnet210 --name=ipnet212_test --ip=192.168.212.11 -itd alpine /bin/sh
#
echo "DONE -----> Ipvlan L2 Mode --internal (iface without a parent interface being specified, e.g. --internal)"
}
##################################################
# Ipvlan L3 Mode --internal (iface without a parent
# interface being specified e.g. --internal)
ipv_internal_dual_stack_l3() {
echo "TEST -----> Ipvlan L3 Mode --internal (iface without a parent interface being specified e.g. --internal)"
### Gateway options --gateways are ignored in L3 mode
docker network create -d ipvlan \
--subnet=192.168.8.0/24 \
--subnet=192.168.9.0/24 \
--gateway=192.168.9.254 \
--subnet=fded:7a74:dec4:5a18::/64 \
--gateway=fded:7a74:dec4:5a18::254 \
--subnet=fded:7a74:dec4:5a19::/64 \
--gateway=fded:7a74:dec4:5a19::254 \
-o ipvlan_mode=l3 ipnet9
# Start containers on 192.168.8.0/24 & 7a74:dec4:5a18::/64
docker run --net=ipnet9 --ip6=fded:7a74:dec4:5a18::81 -itd alpine /bin/sh
docker run --net=ipnet9 --ip=192.168.8.80 -itd alpine /bin/sh
docker run --net=ipnet9 --ip=192.168.8.81 --ip6=fded:7a74:dec4:5a18::80 -itd alpine /bin/sh
# Start containers on 192.168.9.0/24 & 7a74:dec4:5a19::/64
docker run --net=ipnet9 --ip6=fded:7a74:dec4:5a18::91 -itd alpine /bin/sh
docker run --net=ipnet9 --ip=192.168.9.90 -itd alpine /bin/sh
docker run --net=ipnet9 --ip=192.168.9.91 --ip6=fded:7a74:dec4:5a18::90 -itd alpine /bin/sh
# Start containers on a mix of the v4/v6 networks create
docker run --net=ipnet9 --ip=192.168.9.100 --ip6=fded:7a74:dec4:5a18::100 -itd alpine /bin/sh
docker run --net=ipnet9 --ip=192.168.8.100 --ip6=fded:7a74:dec4:5a19::100 -itd alpine /bin/sh
#
echo "DONE -----> Ipvlan L3 Mode --internal (iface without a parent interface being specified e.g. --internal)"
}
################################################################################
# Manually Create a Macvlan Bridge mode 802.1q and pass it as the parent link
# Ensure an existing custom link that does not conform to parent.vlan_id works
mcv_8021q_manual() {
echo "TEST -----> Manually Create a Macvlan Bridge mode 802.1q and pass it as the parent link (Ensure an existing custom link that does not conform to parent.vlan_id works)"
### Macvlan Manual .1q Test
# Create a sub-interface on eth0 with a vlan id of 28
ip link add link ${ETH} name ${ETH}.28 type vlan id 28
# enable the new sub-interface
ip link set ${ETH}.28 up
# now add networks and hosts as you would normally by attaching to the master (sub)interface that is tagged
docker network create -d ipvlan \
--subnet=192.168.28.0/24 \
--gateway=192.168.28.1 \
-o parent=${ETH}.28 macnet28
# Start two containers on the network
docker run --net=macnet28 -itd alpine /bin/sh
docker run --net=macnet28 -itd alpine /bin/sh
### Ipvlan Manual .1q Test
# Create a sub-interface on eth0 with a vlan id of 29
ip link add link ${ETH} name ${ETH}.29 type vlan id 29
# enable the new sub-interface
ip link set ${ETH}.29 up
# now add networks and hosts as you would normally by attaching to the master (sub)interface that is tagged
docker network create -d ipvlan \
--subnet=192.168.29.0/24 \
--gateway=192.168.29.1 \
-o parent=${ETH}.29 ipnet29
# Start two containers on the network
docker run --net=ipnet29 -itd alpine /bin/sh
docker run --net=ipnet29 -itd alpine /bin/sh
# Create a sub-interface on eth0 with a vlan id of 26
ip link add link ${ETH} name ${ETH}.26 type vlan id 26
# enable the new sub-interface
ip link set ${ETH}.26 up
# now add networks and hosts as you would normally by attaching to the master (sub)interface that is tagged
docker network create -d ipvlan \
--subnet=192.168.26.0/24 \
--gateway=192.168.26.1 \
-o parent=${ETH}.26 macnet26
# Start two containers on the network
docker run --net=macnet26 -itd alpine /bin/sh
docker run --net=macnet26 -itd alpine /bin/sh
#
echo "DONE -----> Manually Create a Macvlan Bridge mode 802.1q and pass it as the parent link (Ensure an existing custom link that does not conform to parent.vlan_id works)"
}
################################################################################
# Manually Create a Ipvlan L2 mode 802.1q and pass it as the parent link
# Links that already exist can be used if you don't want libnetwork to create them
ipv_8021q_manual_l2() {
echo "TEST -----> Manually Create a Ipvlan L2 mode 802.1q and pass it as the parent link (Links that already exist can be used if you don't want libnetwork to create them)"
### Ipvlan L2 Manual .1q Test
# Create a sub-interface on eth0 with a vlan id of 27
ip link add link ${ETH} name ${ETH}.27 type vlan id 27
# enable the new sub-interface
ip link set ${ETH}.27 up
# now add networks and hosts as you would normally
# by attaching to the master sub-interface that is tagged
docker network create -d ipvlan \
--subnet=192.168.27.0/24 \
--gateway=192.168.27.1 \
-o parent=${ETH}.27 ipnet27
# Start two containers on the network
docker run --net=ipnet29 -itd alpine /bin/sh
docker run --net=ipnet29 -itd alpine /bin/sh
#
echo "DONE -----> Manually Create a Ipvlan L2 mode 802.1q and pass it as the parent link (Links that already exist can be used if you don't want libnetwork to create them)"
}
############################################
### Ipvlan L3 Pre-Existing 802.1q interface
# with a custom named parent interface
ipv_8021q_manual_l3() {
echo "TEST -----> Ipvlan L3 Pre-Existing 802.1q interface (with a custom named parent interface)"
# Create a sub-interface on eth0 with a vlan_id: 19 name: foo creating: foo.19
ip link add link ${ETH} name ${RANDOM_LINK_NAME}.19 type vlan id 19
# enable the new sub-interface
ip link set ${RANDOM_LINK_NAME}.19 up
# now add networks and hosts as you would normally by attaching to the master (sub)interface that is tagged
docker network create -d ipvlan \
--subnet=192.168.19.0/24 \
--gateway=192.168.19.1 \
-o ipvlan_mode=l3 \
-o parent=${RANDOM_LINK_NAME}.19 macnet19
# Start two containers on the network
docker run --net=macnet19 -itd alpine /bin/sh
docker run --net=macnet19 -itd alpine /bin/sh
#
echo "DONE -----> Ipvlan L3 Pre-Existing 802.1q interface (with a custom named parent interface)"
}
### First cleanup
first_cleanup() {
# Separate function so as to leave ip links in place that were created from first
# test so they can be tested as predefined existing links on the second path.
echo 'WARN -----> Deleting all containers and links created by the tests...'
echo 'INFO -----> Running: "docker rm -f `docker ps -qa`"'
docker rm -f `docker ps -qa` > /dev/null 2>&1
echo 'INFO -----> Deleting all networks with names containing: ipnet'
echo 'INFO -----> Running: "docker network rm $(docker network ls | grep ipnet | awk '\{print \$1\}')"'
docker network rm $(docker network ls | grep ipnet | awk '{print $1}') > /dev/null 2>&1
echo 'INFO -----> Deleting all networks with names containing: macnet'
echo 'INFO -----> Running: "docker network rm $(docker network ls | grep macnet | awk '\{print \$1\}')"'
docker network rm $(docker network ls | grep macnet | awk '{print $1}') > /dev/null 2>&1
echo 'INFO -----> Deleting manual 802.1q Links for 802.1q trunk testing'
subparent_cleanup
echo 'INFO -----> Completed deleting all Macvlan/Ipvlan networks and associated Links'
echo "#########################################################################################"
echo 'INFO -----> Running the same test one more time to ensure there'
echo 'INFO -----> are no issues with IPAM releases and/or local k/v cache'
echo "#########################################################################################"
}
# Same as first_cleanup but sub-interfaces
final_cleanup() {
echo 'WARN -----> Deleting all containers and links created by the tests...'
echo 'INFO -----> Running: "docker rm -f `docker ps -qa`"'
docker rm -f `docker ps -qa` > /dev/null 2>&1
echo 'INFO -----> Deleting all networks with names containing: ipnet'
echo 'INFO -----> Running: "docker network rm $(docker network ls | grep ipnet | awk '\{print \$1\}')"'
docker network rm $(docker network ls | grep ipnet | awk '{print $1}') > /dev/null 2>&1
echo 'INFO -----> Deleting all networks with names containing: macnet'
echo 'INFO -----> Running: "docker network rm $(docker network ls | grep macnet | awk '\{print \$1\}')"'
docker network rm $(docker network ls | grep macnet | awk '{print $1}') > /dev/null 2>&1
echo 'INFO -----> Deleting manual 802.1q Links for 802.1q trunk testing'
subparent_cleanup
echo 'INFO -----> Completed deleting all Macvlan/Ipvlan networks and associated Links'
echo "#########################################################################################"
}
# Cleanup subinterfaces
subparent_cleanup(){
echo "INFO -----> Running: ip link del ${ETH}.26"
ip link del ${ETH}.26 > /dev/null 2>&1
echo "INFO -----> Running: ip link del ${ETH}.27"
ip link del ${ETH}.27 > /dev/null 2>&1
echo "INFO -----> Running: ip link del ${ETH}.28"
ip link del ${ETH}.28 > /dev/null 2>&1
echo "INFO -----> Running: ip link del ${ETH}.29"
ip link del ${ETH}.29 > /dev/null 2>&1
echo "INFO -----> Running: ip link del ${RANDOM_LINK_NAME}.19"
ip link del ${RANDOM_LINK_NAME}.19 > /dev/null 2>&1
}
############################################
# Script executes from here:
############################################
# Ensure the dependencies are satisfied
check_setup
# Create networks and containers
run
# Compare actual count, to expected count of networks and containers
verify_results
# Delete all networks and containers
first_cleanup
# Create all networks and containers one more time to ensure
# IPAM releases and local k/v cache was properly cleaned
run
# Compare actual count, to expected count of networks and containers
verify_results
# Delete all networks and containers
final_cleanup
echo "INFO -----> Tests Complete"
echo "#########################################################################################"
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment