values.yaml

# Default values for Kong's Helm Chart.
# Declare variables to be passed into your templates.
#
# Sections:
# - Kong parameters
# - Ingress Controller parameters
# - Postgres sub-chart parameters
# - Miscellaneous parameters
# - Kong Enterprise parameters

# -----------------------------------------------------------------------------
# Kong parameters
# -----------------------------------------------------------------------------

# Specify Kong configurations
# Kong configurations guide https://docs.konghq.com/latest/configuration
# Values here take precedence over values from other sections of values.yaml,
# e.g. setting pg_user here will override the value normally set when postgresql.enabled
# is set below. In general, you should not set values here if they are set elsewhere.
env:
  database: "postgres"
  pg_user: "kong"
  pg_password: "kong"
  nginx_worker_processes: "1"
  proxy_access_log: /dev/stdout
  admin_access_log: /dev/stdout
  admin_gui_access_log: /dev/stdout
  portal_api_access_log: /dev/stdout
  proxy_error_log: /dev/stderr
  admin_error_log: /dev/stderr
  admin_gui_error_log: /dev/stderr
  portal_api_error_log: /dev/stderr
  prefix: /kong_prefix/

# Specify Kong's Docker image and repository details here
image:
  repository: kong-docker-kong-enterprise-edition-docker.bintray.io/kong-enterprise-edition
  tag: "1.5.0.2-alpine"
  # kong-enterprise-k8s image (Kong OSS + Enterprise plugins)
  # repository: kong-docker-kong-enterprise-k8s.bintray.io/kong-enterprise-k8s
  # tag: "2.0.2.0-alpine"
  # kong-enterprise image
  # repository: kong-docker-kong-enterprise-edition-docker.bintray.io/kong-enterprise-edition
  # tag: "1.5.0.0-alpine"

  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## If using the official Kong Enterprise registry above, you MUST provide a secret.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ##
  pullSecrets:
     - kong-enterprise-edition-docker

# Specify Kong admin API service and listener configuration
admin:
  # Enable creating a Kubernetes service for the admin API
  # Disabling this is recommended for most ingress controller configurations
  # Enterprise users that wish to use Kong Manager with the controller should enable this
  enabled: true
  type: NodePort
  # If you want to specify annotations for the admin service, uncomment the following
  # line, add additional or adjust as needed, and remove the curly braces after 'annotations:'.
  annotations: {}
  #  service.beta.kubernetes.io/aws-load-balancer-proxy-protocol: "*"

  http:
    # Enable plaintext HTTP listen for the admin API
    # Disabling this and using a TLS listen only is recommended for most configuration
    enabled: true
    servicePort: 8001
    containerPort: 8001
    # Set a nodePort which is available if service type is NodePort
    # nodePort: 32080
    # Additional listen parameters, e.g. "reuseport", "backlog=16384"
    parameters: []

  tls:
    # Enable HTTPS listen for the admin API
    enabled: true
    servicePort: 8444
    containerPort: 8444
    # Set a target port for the TLS port in the admin API service, useful when using TLS
    # termination on an ELB.
    # overrideServiceTargetPort: 8000
    # Set a nodePort which is available if service type is NodePort
    # nodePort: 32443
    # Additional listen parameters, e.g. "reuseport", "backlog=16384"
    parameters:
    - http2

  # Kong admin ingress settings. Useful if you want to expose the Admin
  # API of Kong outside the k8s cluster.
  ingress:
    # Enable/disable exposure using ingress.
    enabled: false
    # TLS secret name.
    # tls: kong-admin.example.com-tls
    # Ingress hostname
    hostname:
    # Map of ingress annotations.
    annotations: {}
    # Ingress path.
    path: /

# Specify Kong status listener configuration
# This listen is internal-only. It cannot be exposed through a service or ingress.
status:
  http:
    # Enable plaintext HTTP listen for the status listen
    enabled: true
    containerPort: 8100

  tls:
    # Enable HTTPS listen for the status listen
    # Kong does not currently support HTTPS status listens, so this should remain false
    enabled: false
    containerPort: 8543

# Specify Kong proxy service and listener configuration
proxy:
  # Enable creating a Kubernetes service for the proxy
  enabled: true
  type: LoadBalancer
  # If you want to specify annotations for the proxy service, uncomment the following
  # line, add additional or adjust as needed, and remove the curly braces after 'annotations:'.
  annotations: {}
  #  service.beta.kubernetes.io/aws-load-balancer-proxy-protocol: "*"

  http:
    # Enable plaintext HTTP listen for the proxy
    enabled: true
    servicePort: 80
    containerPort: 8000
    # Set a nodePort which is available if service type is NodePort
    # nodePort: 32080
    # Additional listen parameters, e.g. "reuseport", "backlog=16384"
    parameters: []

  tls:
    # Enable HTTPS listen for the proxy
    enabled: true
    servicePort: 443
    containerPort: 8443
    # Set a target port for the TLS port in proxy service, useful when using TLS
    # termination on an ELB.
    # overrideServiceTargetPort: 8000
    # Set a nodePort which is available if service type is NodePort
    # nodePort: 32443
    # Additional listen parameters, e.g. "reuseport", "backlog=16384"
    parameters:
    - http2

  # Define stream (TCP) listen
  # To enable, remove "{}", uncomment the section below, and select your desired
  # ports and parameters. Listens are dynamically named after their servicePort,
  # e.g. "stream-9000" for the below.
  stream: {}
    #   # Set the container (internal) and service (external) ports for this listen.
    #   # These values should normally be the same. If your environment requires they
    #   # differ, note that Kong will match routes based on the containerPort only.
    # - containerPort: 9000
    #   servicePort: 9000
    #   # Optionally set a static nodePort if the service type is NodePort
    #   # nodePort: 32080
    #   # Additional listen parameters, e.g. "ssl", "reuseport", "backlog=16384"
    #   # "ssl" is required for SNI-based routes. It is not supported on versions <2.0
    #   parameters: []

  # Kong proxy ingress settings.
  # Note: You need this only if you are using another Ingress Controller
  # to expose Kong outside the k8s cluster.
  ingress:
    # Enable/disable exposure using ingress.
    enabled: false
    hosts: []
    # TLS section. Unlike other ingresses, this follows the format at
    # https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
    # tls:
    # - hosts:
    #   - 1.example.com
    #   secretName: example1-com-tls-secret
    # - hosts:
    #   - 2.example.net
    #   secretName: example2-net-tls-secret
    # Map of ingress annotations.
    annotations: {}
    # Ingress path.
    path: /

  externalIPs: []

# Custom Kong plugins can be loaded into Kong by mounting the plugin code
# into the file-system of Kong container.
# The plugin code should be present in ConfigMap or Secret inside the same
# namespace as Kong is being installed.
# The `name` property refers to the name of the ConfigMap or Secret
# itself, while the pluginName refers to the name of the plugin as it appears
# in Kong.
# Subdirectories (which are optional) require separate ConfigMaps/Secrets.
# "path" indicates their directory under the main plugin directory: the example
# below will mount the contents of kong-plugin-rewriter-migrations at "/opt/kong/rewriter/migrations".
plugins: {}
  # configMaps:
  # - pluginName: rewriter
  #   name: kong-plugin-rewriter
  #   subdirectories:
  #   - name: kong-plugin-rewriter-migrations
  #     path: migrations
  # secrets:
  # - pluginName: rewriter
  #   name: kong-plugin-rewriter
# Inject specified secrets as a volume in Kong Container at path /etc/secrets/{secret-name}/
# This can be used to override default SSL certificates.
# Be aware that the secret name will be used verbatim, and that certain types
# of punctuation (e.g. `.`) can cause issues.
# Example configuration
# secretVolumes:
# - kong-proxy-tls
# - kong-admin-tls
secretVolumes: []

# Enable/disable migration jobs, and set annotations for them
migrations:
  # Enable pre-upgrade migrations (run "kong migrations up")
  preUpgrade: true
  # Enable post-upgrade migrations (run "kong migrations finish")
  postUpgrade: true
  # Annotations to apply to migrations jobs
  # By default, these disable service mesh sidecar injection for Istio and Kuma,
  # as the sidecar containers do not terminate and prevent the jobs from completing
  annotations:
    sidecar.istio.io/inject: false
    kuma.io/sidecar-injection: "disabled"

# Kong's configuration for DB-less mode
# Note: Use this section only if you are deploying Kong in DB-less mode
# and not as an Ingress Controller.
dblessConfig:
  # Either Kong's configuration is managed from an existing ConfigMap (with Key: kong.yml)
  configMap: ""
  # Or the configuration is passed in full-text below
  config:
    _format_version: "1.1"
    services:
      # Example configuration
      # - name: example.com
      #   url: http://example.com
      #   routes:
      #   - name: example
      #     paths:
      #     - "/example"

# -----------------------------------------------------------------------------
# Ingress Controller parameters
# -----------------------------------------------------------------------------

# Kong Ingress Controller's primary purpose is to satisfy Ingress resources
# created in k8s.  It uses CRDs for more fine grained control over routing and
# for Kong specific configuration.
ingressController:
  enabled: false
  image:
    repository: kong-docker-kubernetes-ingress-controller.bintray.io/kong-ingress-controller
    tag: 0.8.0
  args: []

  # Specify Kong Ingress Controller configuration via environment variables
  env:
    # The controller disables TLS verification by default because Kong
    # generates self-signed certificates by default. Set this to false once you
    # have installed CA-signed certificates.
    kong_admin_tls_skip_verify: true
    # If using Kong Enterprise with RBAC enabled, uncomment the section below
    # and specify the secret/key containing your admin token.
    # kong_admin_token:
    #   valueFrom:
    #     secretKeyRef:
    #        name: CHANGEME-admin-token-secret
    #        key: CHANGEME-admin-token-key

  admissionWebhook:
    enabled: false
    failurePolicy: Fail
    port: 8080

  ingressClass: kong

  rbac:
    # Specifies whether RBAC resources should be created
    create: true

  serviceAccount:
    # Specifies whether a ServiceAccount should be created
    create: true
    # The name of the ServiceAccount to use.
    # If not set and create is true, a name is generated using the fullname template
    name:
    # The annotations for service account
    annotations: {}

  installCRDs: false

  # general properties
  livenessProbe:
    httpGet:
      path: "/healthz"
      port: 10254
      scheme: HTTP
    initialDelaySeconds: 5
    timeoutSeconds: 5
    periodSeconds: 10
    successThreshold: 1
    failureThreshold: 3
  readinessProbe:
    httpGet:
      path: "/healthz"
      port: 10254
      scheme: HTTP
    initialDelaySeconds: 5
    timeoutSeconds: 5
    periodSeconds: 10
    successThreshold: 1
    failureThreshold: 3
  resources: {}

# -----------------------------------------------------------------------------
# Postgres sub-chart parameters
# -----------------------------------------------------------------------------

# Kong can run without a database or use either Postgres or Cassandra
# as a backend datatstore for it's configuration.
# By default, this chart installs Kong without a database.

# If you would like to use a database, there are two options:
# - (recommended) Deploy and maintain a database and pass the connection
#   details to Kong via the `env` section.
# - You can use the below `postgresql` sub-chart to deploy a database
#   along-with Kong as part of a single Helm release.

# PostgreSQL chart documentation:
# https://github.com/helm/charts/blob/master/stable/postgresql/README.md

postgresql:
  enabled: true
  postgresqlUsername: kong
  postgresqlPassword: kong
  postgresqlDatabase: kong
  # service:
  #   port: 5432

# -----------------------------------------------------------------------------
# Miscellaneous parameters
# -----------------------------------------------------------------------------

waitImage:
  repository: busybox
  tag: latest
  pullPolicy: IfNotPresent

# update strategy
updateStrategy: {}
  # type: RollingUpdate
  # rollingUpdate:
  #   maxSurge: "100%"
  #   maxUnavailable: "0%"

# If you want to specify resources, uncomment the following
# lines, adjust them as necessary, and remove the curly braces after 'resources:'.
resources: {}
  # limits:
  #  cpu: 100m
  #  memory: 128Mi
  # requests:
  #  cpu: 100m
  #  memory: 128Mi

# readinessProbe for Kong pods
# If using Kong Enterprise with RBAC, you must add a Kong-Admin-Token header
readinessProbe:
  httpGet:
    path: "/status"
    port: metrics
    scheme: HTTP
  initialDelaySeconds: 5
  timeoutSeconds: 5
  periodSeconds: 10
  successThreshold: 1
  failureThreshold: 3

# livenessProbe for Kong pods
livenessProbe:
  httpGet:
    path: "/status"
    port: metrics
    scheme: HTTP
  initialDelaySeconds: 5
  timeoutSeconds: 5
  periodSeconds: 10
  successThreshold: 1
  failureThreshold: 3

# Affinity for pod assignment
# Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
# affinity: {}

# Tolerations for pod assignment
# Ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
tolerations: []

# Node labels for pod assignment
# Ref: https://kubernetes.io/docs/user-guide/node-selection/
nodeSelector: {}

# Annotation to be added to Kong pods
podAnnotations: {}

# Kong pod count
replicaCount: 1

# Annotations to be added to Kong deployment
deploymentAnnotations:
  kuma.io/gateway: enabled
  traffic.sidecar.istio.io/includeInboundPorts: ""

# Enable autoscaling using HorizontalPodAutoscaler
autoscaling:
  enabled: false
  minReplicas: 2
  maxReplicas: 5
  ## targetCPUUtilizationPercentage only used if the cluster doesn't support autoscaling/v2beta
  targetCPUUtilizationPercentage:
  ## Otherwise for clusters that do support autoscaling/v2beta, use metrics
  metrics:
    - type: Resource
      resource:
        name: cpu
        target:
          type: Utilization
          averageUtilization: 80

# Kong Pod Disruption Budget
podDisruptionBudget:
  enabled: false
  maxUnavailable: "50%"

podSecurityPolicy:
  enabled: false
  spec:
    privileged: false
    fsGroup:
      rule: RunAsAny
    runAsUser:
      rule: RunAsAny
    runAsGroup:
      rule: RunAsAny
    seLinux:
      rule: RunAsAny
    supplementalGroups:
      rule: RunAsAny
    volumes:
      - 'configMap'
      - 'secret'
      - 'emptyDir'
    allowPrivilegeEscalation: false
    hostNetwork: false
    hostIPC: false
    hostPID: false
    # Make the root filesystem read-only. This is not compatible with Kong Enterprise <1.5.
    # If you use Kong Enterprise <1.5, this must be set to false.
    readOnlyRootFilesystem: true


priorityClassName: ""

# securityContext for Kong pods.
securityContext:
  runAsUser: 1000

serviceMonitor:
  # Specifies whether ServiceMonitor for Prometheus operator should be created
  enabled: false
  # interval: 10s
  # Specifies namespace, where ServiceMonitor should be installed
  # namespace: monitoring
  # labels:
  #   foo: bar

# -----------------------------------------------------------------------------
# Kong Enterprise parameters
# -----------------------------------------------------------------------------

# Toggle Kong Enterprise features on or off
# RBAC and SMTP configuration have additional options that must all be set together
# Other settings should be added to the "env" settings below
enterprise:
  enabled: true
  # Kong Enterprise license secret name
  # This secret must contain a single 'license' key, containing your base64-encoded license data
  # The license secret is required for all Kong Enterprise deployments
  license_secret: kong-enterprise-license
  vitals:
    enabled: true
  portal:
    enabled: false
  rbac:
    enabled: false
    admin_gui_auth: basic-auth
    # If RBAC is enabled, this Secret must contain an admin_gui_session_conf key
    # The key value must be a secret configuration, following the example at
    # https://docs.konghq.com/enterprise/latest/kong-manager/authentication/sessions
    session_conf_secret: you-must-create-an-rbac-session-conf-secret
    # If admin_gui_auth is not set to basic-auth, provide a secret name which
    # has an admin_gui_auth_conf key containing the plugin config JSON
    admin_gui_auth_conf_secret: you-must-create-an-admin-gui-auth-conf-secret
  # For configuring emails and SMTP, please read through:
  # https://docs.konghq.com/enterprise/latest/developer-portal/configuration/smtp
  # https://docs.konghq.com/enterprise/latest/kong-manager/networking/email
  smtp:
    enabled: false
    portal_emails_from: none@example.com
    portal_emails_reply_to: none@example.com
    admin_emails_from: none@example.com
    admin_emails_reply_to: none@example.com
    smtp_admin_emails: none@example.com
    smtp_host: smtp.example.com
    smtp_port: 587
    smtp_starttls: true
    auth:
      # If your SMTP server does not require authentication, this section can
      # be left as-is. If smtp_username is set to anything other than an empty
      # string, you must create a Secret with an smtp_password key containing
      # your SMTP password and specify its name here.
      smtp_username: ''  # e.g. postmaster@example.com
      smtp_password_secret: you-must-create-an-smtp-password

manager:
  # Enable creating a Kubernetes service for Kong Manager
  enabled: true
  type: NodePort
  # If you want to specify annotations for the Manager service, uncomment the following
  # line, add additional or adjust as needed, and remove the curly braces after 'annotations:'.
  annotations: {}
  #  service.beta.kubernetes.io/aws-load-balancer-proxy-protocol: "*"

  http:
    # Enable plaintext HTTP listen for Kong Manager
    enabled: true
    servicePort: 8002
    containerPort: 8002
    # Set a nodePort which is available if service type is NodePort
    # nodePort: 32080
    # Additional listen parameters, e.g. "reuseport", "backlog=16384"
    parameters: []

  tls:
    # Enable HTTPS listen for Kong Manager
    enabled: true
    servicePort: 8445
    containerPort: 8445
    # Set a nodePort which is available if service type is NodePort
    # nodePort: 32443
    # Additional listen parameters, e.g. "reuseport", "backlog=16384"
    parameters:
    - http2

  ingress:
    # Enable/disable exposure using ingress.
    enabled: false
    # TLS secret name.
    # tls: kong-proxy.example.com-tls
    # Ingress hostname
    hostname:
    # Map of ingress annotations.
    annotations: {}
    # Ingress path.
    path: /

  externalIPs: []

portal:
  # Enable creating a Kubernetes service for the Developer Portal
  enabled: true
  type: NodePort
  # If you want to specify annotations for the Portal service, uncomment the following
  # line, add additional or adjust as needed, and remove the curly braces after 'annotations:'.
  annotations: {}
  #  service.beta.kubernetes.io/aws-load-balancer-proxy-protocol: "*"

  http:
    # Enable plaintext HTTP listen for the Developer Portal
    enabled: true
    servicePort: 8003
    containerPort: 8003
    # Set a nodePort which is available if service type is NodePort
    # nodePort: 32080
    # Additional listen parameters, e.g. "reuseport", "backlog=16384"
    parameters: []

  tls:
    # Enable HTTPS listen for the Developer Portal
    enabled: true
    servicePort: 8446
    containerPort: 8446
    # Set a nodePort which is available if service type is NodePort
    # nodePort: 32443
    # Additional listen parameters, e.g. "reuseport", "backlog=16384"
    parameters:
    - http2

  ingress:
    # Enable/disable exposure using ingress.
    enabled: false
    # TLS secret name.
    # tls: kong-proxy.example.com-tls
    # Ingress hostname
    hostname:
    # Map of ingress annotations.
    annotations: {}
    # Ingress path.
    path: /

  externalIPs: []

portalapi:
  # Enable creating a Kubernetes service for the Developer Portal API
  enabled: true
  type: NodePort
  # If you want to specify annotations for the Portal API service, uncomment the following
  # line, add additional or adjust as needed, and remove the curly braces after 'annotations:'.
  annotations: {}
  #  service.beta.kubernetes.io/aws-load-balancer-proxy-protocol: "*"

  http:
    # Enable plaintext HTTP listen for the Developer Portal API
    enabled: true
    servicePort: 8004
    containerPort: 8004
    # Set a nodePort which is available if service type is NodePort
    # nodePort: 32080
    # Additional listen parameters, e.g. "reuseport", "backlog=16384"
    parameters: []

  tls:
    # Enable HTTPS listen for the Developer Portal API
    enabled: true
    servicePort: 8447
    containerPort: 8447
    # Set a nodePort which is available if service type is NodePort
    # nodePort: 32443
    # Additional listen parameters, e.g. "reuseport", "backlog=16384"
    parameters:
    - http2

  ingress:
    # Enable/disable exposure using ingress.
    enabled: false
    # TLS secret name.
    # tls: kong-proxy.example.com-tls
    # Ingress hostname
    hostname:
    # Map of ingress annotations.
    annotations: {}
    # Ingress path.
    path: /

  externalIPs: []