Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save d4rkeagle6591/6a7059a4b8ae6f1e125f322df1885320 to your computer and use it in GitHub Desktop.
Save d4rkeagle6591/6a7059a4b8ae6f1e125f322df1885320 to your computer and use it in GitHub Desktop.
WAX206BootLog
F0: 102B 0000
F6: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 0000 0041 [0000]
G0: 0190 0000
T0: 0000 036D [000F]
Jump to BL
UNIVPLL_CON0 = 0xFE000000!!!
mt_pll_init: Set pll frequency for 25M crystal
[PMIC_WRAP]wrap_init pass,the return value=0.
[pmic_init] Preloader Start..................
[pmic_init] MT6380 CHIP Code, reg_val = 0, 1:E2 0:E3
[pmic_init] Done...................
Chip part number:7622B
MT7622 Version: 1.2.8, (iPA)
SSC OFF
mt_pll_post_init: mt_get_cpu_freq = 1350000Khz
mt_pll_post_init: mt_get_mem_freq = 1600000Khz
mt_pll_post_init: mt_get_bus_freq = 1119920Khz
[PLFM] Init I2C: OK(0)
[BLDR] Build Time: 20210408-144606
==== Dump RGU Reg ========
RGU MODE: 4D
RGU LENGTH: FFE0
RGU STA: 0
RGU INTERVAL: FFF
RGU SWSYSRST: 8000
==== Dump RGU Reg End ====
RGU: g_rgu_satus:0
mtk_wdt_mode_config mode value=10, tmp:22000010
PL P ON
WDT does not trigger reboot
WDT NONRST=0x20000000
WDT IRQ_EN=0x340003
RGU mtk_wdt_init:MTK_WDT_DEBUG_CTL(590200F3)
[EMI] MDL number = 2
[EMI] DRAMC calibration start
[EMI] DRAMC calibration end
[EMI]rank size auto detect
[EMI]start_addr[0x40000000]=0x12345678, test_addr[0x48000000]= 0xEDCBA987
[EMI]start_addr[0x40000000]=0x12345678, test_addr[0x50000000]= 0xEDCBA987
[EMI]start_addr[0x40000000]=0xEDCBA987, test_addr[0x60000000]= 0xEDCBA987
[EMI]rank0 size: 0x20000000
[MEM] complex R/W mem test pass
RAM_CONSOLE wdt status (0x0)=0x0
id: 98 EB
[BBT] BMT.v2 is found at 0x7FF
[PLFM] Init Boot Device: OK(0)
[PART] blksz: 2048B
[PART] [0x0000000000000000-0x000000000007FFFF] "PRELOADER" (256 blocks)
[PART] [0x0000000000080000-0x00000000000BFFFF] "tee1" (128 blocks)
[PART] [0x00000000000C0000-0x000000000013FFFF] "lk" (256 blocks)
Device APC domain init setup:
Domain Setup (0x0)
Domain Setup (0x0)
Device APC domain after setup:
Domain Setup (0x0)
Domain Setup (0x0)
[PART] Image with part header
[PART] name : U-Boot
[PART] addr : 41E00000h mode : -1
[PART] size : 359112
[PART] magic: 58881688h
[PART] load "lk" from 0x00000000000C0200 (dev) to 0x41E00000 (mem) [SUCCESS]
[PART] load speed: 18457KB/s, 359112 bytes, 19ms
load lk (ret=0)
[PART] Image with part header
[PART] name : atf
[PART] addr : FFFFFFFFh mode : -1
[PART] size : 57936
[PART] magic: 58881688h
[PART] load "tee1" from 0x0000000000080200 (dev) to 0x43000DC0 (mem) [SUCCESS]
[PART] load speed: 18859KB/s, 57936 bytes, 3ms
load tee1 (ret=0)
[BLDR] bldr load tee part ret=0x0, addr=0x43001000
[BLDR] boot part. not found
[BLDR] part_load_images ret=0x0
[BLDR] Others, jump to ATF
[BLDR] jump to 0x41E00000
[BLDR] <0x41E00000>=0xEA00000F
[BLDR] <0x41E00004>=0xE59FF014
U-Boot 2014.04-rc1 (May 25 2021 - 14:18:25)
auto detection g_total_rank_size = 0x1F000000
DRAM: 496 MiB
ledctl_init_led_dev......
NAND: Recognize SNAND: ID [98 eb ], Device Name [TC58CVG1S3HRAIJ], Page Size [2048]B Spare Size [128]B Total Size [256]MB
[mtk_snand] probe successfully!
Not found in UBOOT NAND flash list
[BBT] BMT.v2 is found at 0x7ff
256 MiB
In: serial
Out: serial
Err: serial
Net: mtk_eth
Uip activated
nmrp activated
ETH already turn on and power on flow will be skipped...
Waitting for RX_DMA_BUSY status Start... done
mt7531: mt7531_sw_init
mt7531: mt7531_core_pll_setup, hwstrap = 000000ff, xtal=25MHz
mt7531: mt7531_mac_port_setup, port = 6
mt7531: mt7531_set_port_sgmii_force_mode, port = 6
mt7531: timeout waiting for SGMII_LINK
mt7531: mt7531_mac_port_setup, PMCR6 = f805633b
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> START CALIBRATION:
-------- gephy-calbration (port:0) --------
CALDLY = 40
0x1e-e0 = 2727
0x1f-115 = 4
GE Rext AnaCal Done! (7)(0x27)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (8) (0x35)(0xb5)
GE R50 AnaCal Done! (8) (0x35)(0xb5)
GE R50 AnaCal Done! (8) (0x35)(0xb5)
GE 1e_174(0xb4b5), 1e_175(0xb5b5)
GE Tx offset AnaCal Done! (pair-0)(3)(0x3) 0x1e_172=0x320
GE Tx offset AnaCal Done! (pair-1)(5)(0x24) 0x1e_172=0x324
GE Tx offset AnaCal Done! (pair-2)(5)(0x24) 0x1e_173=0x2420
GE Tx offset AnaCal Done! (pair-3)(4)(0x23) 0x1e_173=0x2423
GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x5415)
GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1212)
GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x171f)
GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1b23)
PORT 0 RX_DC_OFFSET
before pairA output = f
after pairA output = ff
before pairB output = 1d
after pairB output = ff
before pairC output = f
after pairC output = 1
before pairD output = f
after pairD output = fe
-------- gephy-calbration (port:1) --------
CALDLY = 40
GE R50 AnaCal Done! (10) (0x32)(0xb2)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (10) (0x32)(0xb2)
GE 1e_174(0xb2b4), 1e_175(0xb4b2)
GE Tx offset AnaCal Done! (pair-0)(6)(0x25) 0x1e_172=0x2520
GE Tx offset AnaCal Done! (pair-1)(5)(0x24) 0x1e_172=0x2524
GE Tx offset AnaCal Done! (pair-2)(5)(0x24) 0x1e_173=0x2420
GE Tx offset AnaCal Done! (pair-3)(2)(0x2) 0x1e_173=0x2402
GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x8421)
GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1d1d)
GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1820)
GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1f27)
PORT 1 RX_DC_OFFSET
before pairA output = 1d
after pairA output = ff
before pairB output = e
after pairB output = ff
before pairC output = 1e
after pairC output = 0
before pairD output = e
after pairD output = 1
-------- gephy-calbration (port:2) --------
CALDLY = 40
GE R50 AnaCal Done! (10) (0x32)(0xb2)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE 1e_174(0xb2b4), 1e_175(0xb4b4)
GE Tx offset AnaCal Done! (pair-0)(3)(0x3) 0x1e_172=0x320
GE Tx offset AnaCal Done! (pair-1)(7)(0x26) 0x1e_172=0x326
GE Tx offset AnaCal Done! (pair-2)(3)(0x3) 0x1e_173=0x320
GE Tx offset AnaCal Done! (pair-3)(3)(0x22) 0x1e_173=0x322
GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x6c1b)
GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x2626)
GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1d25)
GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1b23)
PORT 2 RX_DC_OFFSET
before pairA output = f
after pairA output = 1
before pairB output = 1c
after pairB output = fe
before pairC output = f
after pairC output = ff
before pairD output = 1e
after pairD output = fe
-------- gephy-calbration (port:3) --------
CALDLY = 40
GE R50 AnaCal Done! (10) (0x32)(0xb2)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (10) (0x32)(0xb2)
GE R50 AnaCal Done! (10) (0x32)(0xb2)
GE 1e_174(0xb2b4), 1e_175(0xb2b2)
GE Tx offset AnaCal Done! (pair-0)(6)(0x25) 0x1e_172=0x2520
GE Tx offset AnaCal Done! (pair-1)(4)(0x23) 0x1e_172=0x2523
GE Tx offset AnaCal Done! (pair-2)(3)(0x22) 0x1e_173=0x2220
GE Tx offset AnaCal Done! (pair-3)(4)(0x23) 0x1e_173=0x2223
GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x5415)
GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1d1d)
GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x2129)
GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x262e)
PORT 3 RX_DC_OFFSET
before pairA output = f
after pairA output = 0
before pairB output = 1e
after pairB output = 0
before pairC output = f
after pairC output = fe
before pairD output = f
after pairD output = 0
-------- gephy-calbration (port:4) --------
CALDLY = 40
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (8) (0x35)(0xb5)
GE R50 AnaCal Done! (10) (0x32)(0xb2)
GE 1e_174(0xb4b4), 1e_175(0xb5b2)
GE Tx offset AnaCal Done! (pair-0)(7)(0x26) 0x1e_172=0x2620
GE Tx offset AnaCal Done! (pair-1)(3)(0x3) 0x1e_172=0x2603
GE Tx offset AnaCal Done! (pair-2)(5)(0x24) 0x1e_173=0x2420
GE Tx offset AnaCal Done! (pair-3)(6)(0x25) 0x1e_173=0x2425
GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x5415)
GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0xe0e)
GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x151d)
GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0xd15)
PORT 4 RX_DC_OFFSET
before pairA output = e
after pairA output = fe
before pairB output = e
after pairB output = 1
before pairC output = f
after pairC output = ff
before pairD output = 1e
after pairD output = fe
0x1b000014 = 0x00110214
nmrp listen timeout.
nmrp Nmrp_cleanup.
*** U-Boot SPI NAND ***
1. System Load Linux to SDRAM via TFTP.
2. System Load Linux Kernel then write to Flash via TFTP.
3. Boot system code via Flash.
4. System Load U-Boot then write to Flash via TFTP.
5. System Load U-Boot then write to Flash via Serial.
6. System Load ATF then write to Flash via TFTP.
7. System Load Preloader then write to Flash via TFTP.
8. System Load ROM header then write to Flash via TFTP.
9. System Load CTP then write to Flash via TFTP.
a. System Load CTP then Boot to CTP (via Flash).
b. System Load SingleImage then write to Flash via TFTP.
U-Boot console
Press UP/DOWN to move or Press 1~9,a~b to choose, ENTER to select
NAND read: device 0 offset 0x28c0000, size 0x2600000
39845888 bytes read: OK
image tag: MTD_IMAGEA_TAG
image size: 0x1a40000
checksum: 0xed521903
image crc: 0xed521903
bootm flag=0, states=70f
* kernel: default image load address = 0x4009ff28
## Loading kernel from FIT Image at 4009ff28 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM64 OpenWrt Linux-4.4.198
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x400a0010
Data Size: 2603923 Bytes = 2.5 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x41080000
Entry Point: 0x41080000
Hash algo: crc32
Hash value: ed770666
Hash algo: sha1
Hash value: 46d6d86860918ae592760f5d10c778f7eef476b2
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 4009ff28 ...
Using 'config@1' configuration
Trying 'fdt@1' fdt subimage
Description: ARM64 OpenWrt MTK-AX3200-MT7531-GMAC1-WAX206 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x4031bcf4
Data Size: 32576 Bytes = 31.8 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: bc3dfa94
Hash algo: sha1
Hash value: b9cd20d8e2297d8594f951e5cc10574c741d5c74
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x4031bcf4
NAND read: device 0 offset 0x2c0000, size 0x2600000
39845888 bytes read: OK
image tag: MTD_IMAGEA_TAG
image size: 0x1a40000
checksum: 0xed521903
image crc: 0xed521903
bootm flag=0, states=70f
* kernel: default image load address = 0x4009ff28
## Loading kernel from FIT Image at 4009ff28 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM64 OpenWrt Linux-4.4.198
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x400a0010
Data Size: 2603923 Bytes = 2.5 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x41080000
Entry Point: 0x41080000
Hash algo: crc32
Hash value: ed770666
Hash algo: sha1
Hash value: 46d6d86860918ae592760f5d10c778f7eef476b2
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 4009ff28 ...
Using 'config@1' configuration
Trying 'fdt@1' fdt subimage
Description: ARM64 OpenWrt MTK-AX3200-MT7531-GMAC1-WAX206 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x4031bcf4
Data Size: 32576 Bytes = 31.8 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: bc3dfa94
Hash algo: sha1
Hash value: b9cd20d8e2297d8594f951e5cc10574c741d5c74
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x4031bcf4
Uncompressing Kernel Image ... OK
Loading Device Tree to 5cf45000, end 5cf4ff3f ... OK
Starting kernel ...
[ATF][ 26.664254]save kernel info
[ATF][ 26.667191]Kernel_EL2
[ATF][ 26.669861]Kernel is 64Bit
[ATF][ 26.672949]pc=0x41080000, r0=0x5cf45000, r1=0x0
INFO: BL3-1: Preparing for EL3 exit to normal world, Kernel
INFO: BL3-1: Next image address = 0x41080000
INFO: BL3-1: Next image spsr = 0x3c9
[ATF][ 26.690647]el3_exit
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.198 (sd@mario) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r0-0f412c88c) ) #0 SMP PREEMPT Wed Jun 9 03:45:48 UTC 2021
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] On node 0 totalpages: 131024
[ 0.000000] DMA zone: 2048 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 131024 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 18 pages/cpu @ffffffc01ffa2000 s35328 r8192 d30208 u73728
[ 0.000000] pcpu-alloc: s35328 r8192 d30208 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128976
[ 0.000000] Kernel command line: console=ttyS0,115200n1 loglevel=8 swiotlb=512 rootfstype=squashfs mtdoops.mtddev=LOG mtdoops.record_size=16384
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] software IO TLB: mapped [mem 0x5fcf4000-0x5fdf4000] (1MB)
[ 0.000000] Memory: 497384K/524096K available (5092K kernel code, 397K rwdata, 1784K rodata, 328K init, 427K bss, 26712K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff800873b000 - 0xffffff800878d000 ( 328 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff800857a000 ( 5096 KB)
[ 0.000000] .rodata : 0xffffff800857a000 - 0xffffff800873b000 ( 1796 KB)
[ 0.000000] .data : 0xffffff800878d000 - 0xffffff80087f07e0 ( 398 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc0800000 ( 8 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 timer(s) running at 12.50MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
[ 0.000003] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
[ 0.000058] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 191126102035 ns
[ 0.000252] Console: colour dummy device 80x25
[ 0.000269] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=50000)
[ 0.000276] pid_max: default: 32768 minimum: 301
[ 0.000325] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000330] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000815] sched-energy: CPU device node has no sched-energy-costs
[ 0.000822] Invalid sched_group_energy for CPU0
[ 0.000825] CPU0: update cpu_capacity 1024
[ 0.000855] ASID allocator initialised with 32768 entries
[ 0.032084] Detected VIPT I-cache on CPU1
[ 0.032114] Invalid sched_group_energy for CPU1
[ 0.032116] CPU1: update cpu_capacity 1024
[ 0.032118] CPU1: Booted secondary processor [410fd034]
[ 0.032154] Brought up 2 CPUs
[ 0.032166] SMP: Total of 2 processors activated.
[ 0.032172] CPU features: detected feature: 32-bit EL0 Support
[ 0.032177] CPU: All CPU(s) started at EL2
[ 0.032189] alternatives: patching kernel code
[ 0.032262] Invalid sched_group_energy for CPU1
[ 0.032268] Invalid sched_group_energy for Cluster1
[ 0.032271] Invalid sched_group_energy for CPU0
[ 0.032275] Invalid sched_group_energy for Cluster0
[ 0.037046] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.037065] futex hash table entries: 512 (order: 4, 65536 bytes)
[ 0.037171] pinctrl core: initialized pinctrl subsystem
[ 0.037672] NET: Registered protocol family 16
[ 0.038099] [SPM] spm_base = ffffff8008026000
[ 0.038104] [SPM] spm_irq_0 = 6, spm_irq_1 = 7
[ 0.038107] [SPM] spm_irq_2 = 8, spm_irq_3 = 9
[ 0.038110] [SPM] set spm as wakeup devcie.
[ 0.038115] [SPM] spm_rtc cnt: 24414.
[ 0.052055] cpuidle: using governor menu
[ 0.052117] vdso: 2 pages (1 code @ ffffff8008580000, 1 data @ ffffff8008794000)
[ 0.052280] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.052377] Serial: AMBA PL011 UART driver
[ 0.052434] [SPM] PWAKE_EN:1, PCMWDT_EN:0, BYPASS_SYSPWREQ:0, I2C_CHANNEL:2
[ 0.052439] [SLP] SLEEP_DPIDLE_EN:1, REPLACE_DEF_WAKESRC:0, SUSPEND_LOG_EN:1
[ 0.085196] vgaarb: loaded
[ 0.085390] SCSI subsystem initialized
[ 0.086828] rbus 18000000.wbsys: PCI host bridge to bus 0000:00
[ 0.086843] pci_bus 0000:00: root bus resource [mem 0x18000000-0x180fffff]
[ 0.086850] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.086869] pci 0000:00:00.0: [14c3:7622] type 00 class 0x000280
[ 0.086884] pci 0000:00:00.0: reg 0x10: [mem 0x18000000-0x1800000f 64bit]
[ 0.086891] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0000000f]
[ 0.086898] pci 0000:00:00.0: reg 0x1c: [mem 0x00000000-0x0000000f]
[ 0.086904] pci 0000:00:00.0: reg 0x20: [mem 0x00000000-0x0000000f]
[ 0.086910] pci 0000:00:00.0: reg 0x24: [mem 0x00000000-0x0000000f]
[ 0.086940] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
[ 0.087246] clocksource: Switched to clocksource arch_sys_counter
[ 0.092038] NET: Registered protocol family 2
[ 0.092415] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.092446] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.092502] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.092550] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.092564] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.092664] NET: Registered protocol family 1
[ 0.092702] PCI: CLS 0 bytes, default 128
[ 0.104002] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.104188] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.104644] fuse init (API version 7.23)
[ 0.105359] io scheduler noop registered
[ 0.105542] io scheduler cfq registered (default)
[ 0.134630] mtk-pcie 1a143000.pcie: pcie rc 0 linkup success
[ 0.134780] mtk-pcie 1a143000.pcie: PCI host bridge to bus 0001:00
[ 0.134792] pci_bus 0001:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.134799] pci_bus 0001:00: root bus resource [mem 0x20000000-0x27ffffff]
[ 0.134806] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.134843] pci 0001:00:00.0: [14c3:5396] type 01 class 0x060400
[ 0.134897] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0xffffffff 64bit pref]
[ 0.135016] pci 0001:00:00.0: of_irq_parse_pci() failed with rc=-22
[ 0.135138] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.135375] pci 0001:01:00.0: [14c3:7915] type 00 class 0x000280
[ 0.135680] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref]
[ 0.135794] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref]
[ 0.135906] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref]
[ 0.136421] pci 0001:01:00.0: supports D1 D2
[ 0.136427] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.143324] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.143364] pci 0001:00:00.0: BAR 0: no space for [mem size 0xffffffff 64bit pref]
[ 0.143370] pci 0001:00:00.0: BAR 0: failed to assign [mem size 0xffffffff 64bit pref]
[ 0.143377] pci 0001:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
[ 0.143387] pci 0001:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref]
[ 0.143478] pci 0001:01:00.0: BAR 2: assigned [mem 0x20100000-0x20103fff 64bit pref]
[ 0.143569] pci 0001:01:00.0: BAR 4: assigned [mem 0x20104000-0x20104fff 64bit pref]
[ 0.143658] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.143669] pci 0001:00:00.0: bridge window [mem 0x20000000-0x201fffff]
[ 0.143729] pcieport 0001:00:00.0: of_irq_parse_pci() failed with rc=-22
[ 0.143744] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
[ 0.143918] pcieport 0001:00:00.0: Signaling PME through PCIe PME interrupt
[ 0.143924] pci 0001:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.143933] pcie_pme 0001:00:00.0:pcie01: service driver pcie_pme loaded
[ 0.244863] mtk-pcie 1a145000.pcie: Port1 link down
[ 0.245036] mtk-pcie 1a145000.pcie: PCI host bridge to bus 0002:00
[ 0.245045] pci_bus 0002:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.245051] pci_bus 0002:00: root bus resource [mem 0x28000000-0x2fffffff]
[ 0.245058] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.249639] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.250717] console [ttyS0] disabled
[ 0.270924] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 232, base_baud = 1562500) is a ST16650V2
[ 1.143115] console [ttyS0] enabled
[ 1.147363] Unable to detect cache hierarchy for CPU 0
[ 1.155550] loop: module loaded
[ 1.159169] dump_power_table[0] = { .cpufreq_khz = 1350000, .cpufreq_ncpu = 2, .cpufreq_power = 995 }
[ 1.168394] dump_power_table[1] = { .cpufreq_khz = 1262500, .cpufreq_ncpu = 2, .cpufreq_power = 811 }
[ 1.177614] dump_power_table[2] = { .cpufreq_khz = 1137500, .cpufreq_ncpu = 2, .cpufreq_power = 736 }
[ 1.186852] dump_power_table[3] = { .cpufreq_khz = 1025000, .cpufreq_ncpu = 2, .cpufreq_power = 624 }
[ 1.196071] dump_power_table[4] = { .cpufreq_khz = 1350000, .cpufreq_ncpu = 1, .cpufreq_power = 517 }
[ 1.205285] dump_power_table[5] = { .cpufreq_khz = 812500, .cpufreq_ncpu = 2, .cpufreq_power = 492 }
[ 1.214415] dump_power_table[6] = { .cpufreq_khz = 1262500, .cpufreq_ncpu = 1, .cpufreq_power = 377 }
[ 1.223631] dump_power_table[7] = { .cpufreq_khz = 600000, .cpufreq_ncpu = 2, .cpufreq_power = 376 }
[ 1.232761] dump_power_table[8] = { .cpufreq_khz = 1137500, .cpufreq_ncpu = 1, .cpufreq_power = 333 }
[ 1.241976] dump_power_table[9] = { .cpufreq_khz = 437500, .cpufreq_ncpu = 2, .cpufreq_power = 295 }
[ 1.251106] dump_power_table[10] = { .cpufreq_khz = 1025000, .cpufreq_ncpu = 1, .cpufreq_power = 258 }
[ 1.260409] dump_power_table[11] = { .cpufreq_khz = 300000, .cpufreq_ncpu = 2, .cpufreq_power = 225 }
[ 1.269624] dump_power_table[12] = { .cpufreq_khz = 812500, .cpufreq_ncpu = 1, .cpufreq_power = 204 }
[ 1.278839] dump_power_table[13] = { .cpufreq_khz = 600000, .cpufreq_ncpu = 1, .cpufreq_power = 166 }
[ 1.288055] dump_power_table[14] = { .cpufreq_khz = 437500, .cpufreq_ncpu = 1, .cpufreq_power = 140 }
[ 1.297269] dump_power_table[15] = { .cpufreq_khz = 300000, .cpufreq_ncpu = 1, .cpufreq_power = 119 }
[ 1.307702] [cal] calefuse1 = 0x78a3ba40
[ 1.311632] [cal] calefuse2 = 0x374010
[ 1.315380] [cal] g_adc_ge_t = 0x23b
[ 1.318945] [cal] g_adc_oe_t = 0x1e2
[ 1.322516] [cal] g_degc_cali = 0x29
[ 1.326091] [cal] g_adc_cali_en_t = 0x1
[ 1.329922] [cal] g_o_slope = 0x0
[ 1.333236] [cal] g_o_slope_sign = 0x0
[ 1.336981] [cal] g_id = 0x0
[ 1.339947] [cal] g_o_vtsmcu1 = 0x0
[ 1.343431] [cal] g_o_vtsmcu2 = 0xdd
[ 1.346996] [cal] g_o_vtsmcu3 = 0x0
[ 1.350482] [cal] g_o_vtsmcu4 = 0x0
[ 1.353968] [cal] g_ge = 0x90
[ 1.357018] [cal] g_gain = 0x27a0
[ 1.360415] [cal] g_x_roomt1 = 0x1f8c
[ 1.367027] MTK-BTIF[E]hal_btif_clk_get_and_prepare(286):[CCF]clk_btif=ffffffc01e740180
[ 1.375054] MTK-BTIF[E]hal_btif_clk_get_and_prepare(292):[CCF]clk_btif_apdma=ffffffc01e740280
[ 1.385145] [btmtk_err] btmtk_get_irq: irq_id:240 irq_flags:8
[ 1.402120] Recognize NAND: ID [
[ 1.405184] 98 eb
[ 1.407196] ], [TC58CVG1S3HRAIJ], Page[2048]B, Spare [128]B Total [256]MB
[ 1.414367] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xeb
[ 1.420721] nand: Toshiba SNAND 256MiB 3,3V 8-bit
[ 1.425425] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 1.433080] [NAND]select ecc bit:12, sparesize :112
[ 1.438778] [BBT] BMT.v2 is found at 0x7ff
[ 1.442916] 18 ofpart partitions found on MTD device MTK-SNAND
[ 1.448750] Creating 18 MTD partitions on "MTK-SNAND":
[ 1.453888] 0x000000000000-0x000000080000 : "Preloader"
[ 1.460372] 0x000000080000-0x0000000c0000 : "ATF"
[ 1.465915] 0x0000000c0000-0x000000140000 : "Bootloader"
[ 1.472387] 0x000000140000-0x0000001c0000 : "Config"
[ 1.478525] 0x0000001c0000-0x0000002c0000 : "Factory"
[ 1.485444] 0x0000002c0000-0x0000028c0000 : "ImageA"
[ 1.545687] 0x0000002e0000-0x0000028c0000 : "Kernel"
[ 1.610337] 2 fit-fw partitions found on MTD device Kernel
[ 1.615828] 0x0000002e0000-0x000000580000 : "kernel"
[ 1.625110] 0x000000580000-0x0000028c0000 : "rootfs"
[ 1.681331] mtd: device 8 (rootfs) set to be root filesystem
[ 1.721658] 1 squashfs-split partitions found on MTD device rootfs
[ 1.727837] 0x000001d20000-0x0000028c0000 : "rootfs_var"
[ 1.749780] 0x0000028c0000-0x000004ec0000 : "Kernel_backup"
[ 1.810619] 0x000004ec0000-0x0000056c0000 : "CFG"
[ 1.826934] 0x0000056c0000-0x000005ac0000 : "RAE"
[ 1.837697] 0x000005ac0000-0x000005bc0000 : "POT"
[ 1.844269] 0x000005bc0000-0x000005fc0000 : "Language"
[ 1.855567] 0x000005fc0000-0x0000061c0000 : "Traffic"
[ 1.863864] 0x0000061c0000-0x0000062c0000 : "Cert"
[ 1.870535] 0x0000062c0000-0x0000063c0000 : "NTGRcryptK"
[ 1.877724] 0x0000063c0000-0x0000068c0000 : "NTGRcryptD"
[ 1.890464] 0x0000068c0000-0x0000069c0000 : "LOG"
[ 1.919108] mtdoops: ready 0, 1 (no erase)
[ 1.923202] mtdoops: Attached to MTD device 19
[ 1.927965] 0x0000069c0000-0x000007000000 : "User_data"
[ 1.942378] mtk-snand 1100d000.snfi: [mtk_snand] probe successfully!
[ 1.949166] mtk-nor 11014000.spi: unrecognized JEDEC id bytes: 00, 0, 0
[ 1.955972] mtk-nor: probe of 11014000.spi failed with error -2
[ 1.962448] libphy: Fixed MDIO Bus: probed
[ 1.966974] sean debug physpeed = 2500
[ 2.004469] mtk_soc_eth 1b100000.ethernet: Ext-phy gpio : 510
[ 2.815409] libphy: mdio: probed
[ 2.818655] mtk_soc_eth 1b100000.ethernet: generated random MAC address ee:48:3a:e5:d8:a8
[ 2.827050] mtk_soc_eth 1b100000.ethernet: connected mac 0 to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 2.837748] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xffffff8008900000, irq 251
[ 2.846880] netif_napi_add() called with weight 256 on device
[ 3.823257] mtk_soc_eth 1b100000.ethernet: path gmac1_sgmii in set_mux_gdm1_to_gmac1_esw updated = 1
[ 3.832389] mtk_soc_eth 1b100000.ethernet: mux mux_gmac2_gmac0_to_gephy isn't present on the SoC
[ 3.841171] mtk_soc_eth 1b100000.ethernet: mux mux_u3_gmac2_to_qphy isn't present on the SoC
[ 3.849608] mtk_soc_eth 1b100000.ethernet: path gmac1_sgmii in set_mux_gmac1_gmac2_to_sgmii_rgmii updated = 1
[ 3.859522] mtk_soc_eth 1b100000.ethernet: mux mux_gmac12_to_gephy_sgmii isn't present on the SoC
[ 3.859526] mtk_soc_eth 1b100000.ethernet: RTL822x init success!
[ 3.859610] ............................................................................................................................................................................................................................................................................................................................................................................................................................................................
[ 3.948345] load nc0 ramcode complete!
[ 3.952197] .........................................................................................................................................................................................................
[ 3.990014] load nc1 ramcode complete!
[ 3.993866] .........................................................................................................................................................................................................................................................
[ 4.040373] load nc2 ramcode complete!
[ 4.044225] ...............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
[ 4.239794] load uc2 ramcode complete!
[ 4.243644] ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
[ 4.410370] load uc ramcode complete!
[ 4.414135] .........
[ 4.417149] load data ramcode complete!
[ 4.421087] ...........................................................................................................................................................................................................................................................................
[ 4.470887] load isram patch complete!
[ 4.474739] ............
[ 4.478200] i2c /dev entries driver
[ 4.483671] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 4.492317] register cpuidle driver!!!!!!!!!!!!!!!!!
[ 4.500399] pkt_redirect_init complete
[ 4.504208] nf_conntrack version 0.5.0 (3885 buckets, 15540 max)
[ 4.511020] NET: Registered protocol family 10
[ 4.516091] sit: IPv6 over IPv4 tunneling driver
[ 4.521130] NET: Registered protocol family 17
[ 4.525610] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 4.538277] 8021q: 802.1Q VLAN Support v1.8
[ 4.542857] registered taskstats version 1
[ 5.087570] mt753x gsw@0: Switch is MediaTek MT7531AE rev 1
[ 5.097996] mt753x gsw@0: HWSTRAP=0xff XTAL=25MHz
[ 5.364704] random: nonblocking pool is initialized
[ 7.108602] mt753x gsw@0: PHY is Realtek 822x, attach its IRQ
[ 7.114377] mt753x gsw@0: IRQ 93 attached!
[ 7.118536] libphy: mt753x_mdio: probed
[ 7.377931] mt753x gsw@0: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> START CALIBRATION:
[ 7.386096] mt753x gsw@0: -------- gephy-calbration (port:0) --------
[ 7.402722] CALDLY = 40
[ 7.460985] 0x1e-e0 = 2727
[ 7.465670] 0x1f-115 = 4
[ 7.468201] GE Rext AnaCal Done! (7)(0x27)
[ 7.536538] GE R50 AnaCal Done! (9) (0x34)(0xb4)
[ 7.594205] GE R50 AnaCal Done! (8) (0x35)(0xb5)
[ 7.651872] GE R50 AnaCal Done! (8) (0x35)(0xb5)
[ 7.709558] GE R50 AnaCal Done! (8) (0x35)(0xb5)
[ 7.717799] GE 1e_174(0xb4b5), 1e_175(0xb5b5)
[ 7.765665] GE Tx offset AnaCal Done! (pair-0)(3)(0x3) 0x1e_172=0x320
[ 7.809140] GE Tx offset AnaCal Done! (pair-1)(5)(0x24) 0x1e_172=0x324
[ 7.847780] GE Tx offset AnaCal Done! (pair-2)(4)(0x23) 0x1e_173=0x2320
[ 7.886494] GE Tx offset AnaCal Done! (pair-3)(4)(0x23) 0x1e_173=0x2323
[ 7.959752] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x5415)
[ 8.023269] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1212)
[ 8.057657] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x171f)
[ 8.111925] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1b23)
[ 8.165813] PORT 0 RX_DC_OFFSET
[ 8.180149] before pairA output = f
[ 8.185717] after pairA output = ff
[ 8.191205] before pairB output = 1d
[ 8.196863] after pairB output = ff
[ 8.202354] before pairC output = 1e
[ 8.208019] after pairC output = fe
[ 8.213500] before pairD output = f
[ 8.219066] after pairD output = fe
[ 8.222855] mt753x gsw@0: -------- gephy-calbration (port:1) --------
[ 8.239583] CALDLY = 40
[ 8.306616] GE R50 AnaCal Done! (10) (0x32)(0xb2)
[ 8.370245] GE R50 AnaCal Done! (9) (0x34)(0xb4)
[ 8.433354] GE R50 AnaCal Done! (9) (0x34)(0xb4)
[ 8.501605] GE R50 AnaCal Done! (10) (0x32)(0xb2)
[ 8.509921] GE 1e_174(0xb2b4), 1e_175(0xb4b2)
[ 8.573600] GE Tx offset AnaCal Done! (pair-0)(6)(0x25) 0x1e_172=0x2520
[ 8.617232] GE Tx offset AnaCal Done! (pair-1)(5)(0x24) 0x1e_172=0x2524
[ 8.660868] GE Tx offset AnaCal Done! (pair-2)(5)(0x24) 0x1e_173=0x2420
[ 8.683377] GE Tx offset AnaCal Done! (pair-3)(1)(0x1) 0x1e_173=0x2401
[ 8.814844] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x8421)
[ 8.878317] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1d1d)
[ 8.912659] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1820)
[ 8.993412] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1f27)
[ 9.047268] PORT 1 RX_DC_OFFSET
[ 9.061591] before pairA output = 1d
[ 9.067245] after pairA output = ff
[ 9.072726] before pairB output = e
[ 9.078293] after pairB output = ff
[ 9.083781] before pairC output = 1e
[ 9.089433] after pairC output = 0
[ 9.094825] before pairD output = e
[ 9.100391] after pairD output = 1
[ 9.104094] mt753x gsw@0: -------- gephy-calbration (port:2) --------
[ 9.120813] CALDLY = 40
[ 9.187884] GE R50 AnaCal Done! (10) (0x32)(0xb2)
[ 9.251489] GE R50 AnaCal Done! (9) (0x34)(0xb4)
[ 9.315061] GE R50 AnaCal Done! (9) (0x34)(0xb4)
[ 9.378511] GE R50 AnaCal Done! (9) (0x34)(0xb4)
[ 9.386752] GE 1e_174(0xb2b4), 1e_175(0xb4b4)
[ 9.429256] GE Tx offset AnaCal Done! (pair-0)(2)(0x2) 0x1e_172=0x220
[ 9.483280] GE Tx offset AnaCal Done! (pair-1)(7)(0x26) 0x1e_172=0x226
[ 9.516287] GE Tx offset AnaCal Done! (pair-2)(3)(0x3) 0x1e_173=0x320
[ 9.549194] GE Tx offset AnaCal Done! (pair-3)(3)(0x22) 0x1e_173=0x322
[ 9.634763] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x6c1b)
[ 9.763361] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x2626)
[ 9.823694] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1d25)
[ 9.877456] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1b23)
[ 9.930773] PORT 2 RX_DC_OFFSET
[ 9.944975] before pairA output = f
[ 9.950522] after pairA output = 1
[ 9.955903] before pairB output = 1c
[ 9.961538] after pairB output = fe
[ 9.967008] before pairC output = f
[ 9.972548] after pairC output = ff
[ 9.978007] before pairD output = 1e
[ 9.983641] after pairD output = ff
[ 9.987422] mt753x gsw@0: -------- gephy-calbration (port:3) --------
[ 10.004054] CALDLY = 40
[ 10.070428] GE R50 AnaCal Done! (10) (0x32)(0xb2)
[ 10.133416] GE R50 AnaCal Done! (9) (0x34)(0xb4)
[ 10.201582] GE R50 AnaCal Done! (10) (0x32)(0xb2)
[ 10.269835] GE R50 AnaCal Done! (10) (0x32)(0xb2)
[ 10.278157] GE 1e_174(0xb2b4), 1e_175(0xb2b2)
[ 10.341739] GE Tx offset AnaCal Done! (pair-0)(6)(0x25) 0x1e_172=0x2520
[ 10.380073] GE Tx offset AnaCal Done! (pair-1)(4)(0x23) 0x1e_172=0x2523
[ 10.413130] GE Tx offset AnaCal Done! (pair-2)(3)(0x22) 0x1e_173=0x2220
[ 10.451460] GE Tx offset AnaCal Done! (pair-3)(4)(0x23) 0x1e_173=0x2223
[ 10.536992] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x5415)
[ 10.599787] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1d1d)
[ 10.679709] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x2028)
[ 10.792465] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x252d)
[ 10.845804] PORT 3 RX_DC_OFFSET
[ 10.859979] before pairA output = f
[ 10.865524] after pairA output = 0
[ 10.870907] before pairB output = 1e
[ 10.876540] after pairB output = 0
[ 10.881918] before pairC output = e
[ 10.887475] after pairC output = 1
[ 10.892854] before pairD output = f
[ 10.898399] after pairD output = 0
[ 10.902098] mt753x gsw@0: -------- gephy-calbration (port:4) --------
[ 10.918735] CALDLY = 40
[ 10.979802] GE R50 AnaCal Done! (9) (0x34)(0xb4)
[ 11.042710] GE R50 AnaCal Done! (9) (0x34)(0xb4)
[ 11.100330] GE R50 AnaCal Done! (8) (0x35)(0xb5)
[ 11.168520] GE R50 AnaCal Done! (10) (0x32)(0xb2)
[ 11.176849] GE 1e_174(0xb4b4), 1e_175(0xb5b2)
[ 11.245716] GE Tx offset AnaCal Done! (pair-0)(7)(0x26) 0x1e_172=0x2620
[ 11.278806] GE Tx offset AnaCal Done! (pair-1)(3)(0x3) 0x1e_172=0x2603
[ 11.322336] GE Tx offset AnaCal Done! (pair-2)(5)(0x24) 0x1e_173=0x2420
[ 11.371248] GE Tx offset AnaCal Done! (pair-3)(6)(0x25) 0x1e_173=0x2425
[ 11.456714] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x5415)
[ 11.545854] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0xe0e)
[ 11.592952] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x151d)
[ 11.692676] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0xd15)
[ 11.745887] PORT 4 RX_DC_OFFSET
[ 11.760081] before pairA output = e
[ 11.765629] after pairA output = ff
[ 11.771095] before pairB output = e
[ 11.776640] after pairB output = 1
[ 11.782017] before pairC output = f
[ 11.787564] after pairC output = ff
[ 11.793022] before pairD output = 1e
[ 11.798656] after pairD output = ff
[ 11.804841] [SPM] pwrap node has not register regmap
[ 11.810257] regulator regulator.3: info->modeset_reg 0xc = 0x181c32a2
[ 11.817670] regulator regulator.3: info->modeset_reg 0xc = 0x101c32a2
[ 11.833510] VFS: Mounted root (squashfs filesystem) readonly on device 31:8.
[ 11.840726] Freeing unused kernel memory: 328K
[ 11.845182] This architecture does not have kernel memory protection.
[ 12.217495] init: Console is alive
[ 12.588941] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 12.626107] gpio-keys gpio-keys: failed to set debounce_interval for gpio:511
[ 12.633795] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 12.643498] init: - preinit -
[ 13.557392] jffs2: notice: (843) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 13.789329] jffs2: notice: (865) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
uci: Invalid argument
7531 need fix 100base reg!
Set 1 port
Set 2 port
Set 3 port
Set 4 port
Check 1 port
Phy read reg=0x1, value=0x1c0
Phy read reg=0x7, value=0x3c0
Phy read reg=0x4, value=0x209
Phy read reg=0xa, value=0xc
Check 2 port
Phy read reg=0x1, value=0x1c0
Phy read reg=0x7, value=0x3c0
Phy read reg=0x4, value=0x209
Phy read reg=0xa, value=0xc
Check 3 port
Phy read reg=0x1, value=0x1c0
Phy read reg=0x7, value=0x3c0
Phy read reg=0x4, value=0x209
Phy read reg=0xa, value=0xc
Check 4 port
Phy read reg=0x1, value=0x1c0
Phy read reg=0x7, value=0x3c0
Phy read reg=0x4, value=0x209
Phy read reg=0xa, value=0xc
7531 need modify collision reg!
Write reg=30e0, value=203f
region is US
/bin/board_detect: line 10: WARNING:: not found
WARNING: Variable 'lan' does not exist or is not an array/object
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 17.809370] mount_root: mounting /dev/root
[ 17.816256] mount_root: loading kmods from internal overlay
[ 17.842386] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 17.850807] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 18.003464] block: attempting to load /etc/config/fstab
[ 18.029744] block: extroot: not configured
[ 18.035591] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 18.049292] procd: - early -
[ 18.632385] procd: - ubus -
[ 18.805784] procd: - init -
[ 19.356552] kmodloader: loading kernel modules from /etc/modules.d/*
[ 19.365433] tun: Universal TUN/TAP device driver, 1.6
[ 19.370603] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 19.377923] l2tp_core: L2TP core driver, V2.0
[ 19.382703] l2tp_netlink: L2TP netlink interface
[ 19.387707] gre: GRE over IPv4 demultiplexor driver
[ 19.393017] ip_gre: GRE over IPv4 tunneling driver
[ 19.399587] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 19.412236] cryptodev: driver 1.8 loaded.
[ 19.418141] arp_tables: (C) 2002 David S. Miller
[ 19.424442] Bridge firewalling registered
[ 19.439967] Ebtables v2.0 registered
[ 19.447398] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.454045] mtk_eth_api_init
[ 19.456959] Init mtk_eth_api Driver Module....OK
[ 19.462351] Current mapfilter version v2.0.2
[ 19.467343] -->mtfwd_init(ver:1.0)<--
[ 19.472461] mediatek_soc_hnat 1b100000.hnat: wan = eth0.4095
[ 19.478387] mediatek_soc_hnat 1b100000.hnat: lan = eth0
[ 19.483659] mediatek_soc_hnat 1b100000.hnat: ppd = eth0.0
[ 19.489115] mediatek_soc_hnat 1b100000.hnat: gmac num = 2
[ 19.495560] mediatek_soc_hnat 1b100000.hnat: FOE entry number = 8192
[ 19.502599] mediatek_soc_hnat 1b100000.hnat: hwnat start
[ 19.532002] Netfilter messages via NETLINK v0.30.
[ 19.543552] xt_time: kernel timezone is -0000
[ 20.533195] register mt_drv
[ 20.536470] mt_drv 0001:01:00.0: enabling device (0000 -> 0002)
[ 20.549923]
[ 20.549923]
[ 20.549923] === pAd = ffffff8009901000, size = 14447616 ===
[ 20.549923]
[ 20.560965] <-- RTMPAllocAdapterBlock, Status=0
[ 20.565614] PCI CSRBaseAddress =0xffffff8009800000, csr_addr=0xffffff8009800000!
[ 20.573121] RTMPInitPCIeDevice():device_id=0x7915
[ 20.577893] mt7915_init()-->
[ 20.580817] Use 1st iPAiLNA default bin.
[ 20.584862] <--mt7915_init()
[ 20.588502] wdev_init(caller:RTMP_COM_IoctlHandle+0x340/0x16a8 [mt_wifi]), wdev(0)
[ 20.596535] Rx[0] Ring: total 24576 bytes allocated
[ 20.601589] Rx[1] Ring: total 24576 bytes allocated
[ 20.607064] Rx[2] Ring: total 8192 bytes allocated
[ 20.612966] Rx[3] Ring: total 16384 bytes allocated
[ 20.618431] Rx[4] Ring: total 8192 bytes allocated
[ 20.623645] <-- pci_alloc_tx_rx_ring_mem, Status=0
[ 20.996920] mt7622_mt_wifi: module license 'Proprietary' taints kernel.
[ 21.003612] Disabling lock debugging due to kernel taint
[ 21.025896] register mt_drv
[ 21.033198]
[ 21.033198] == pAd = ffffff800ad01000, size = 6738560, Status=0 ==
[ 21.040940] AP Driver version-5.1.0.0
[ 21.044731] read sub id = 2
[ 21.047549] Use 1st iPAiLNA default bin.
[ 21.051489] Use 1st etc/wifi_rom/MT7622_EEPROM.bin default bin.
[ 21.057473] <--mt7622_init()
[ 21.061186] <-- RTMPAllocTxRxRingMemory, Status=0
[ 21.068526] ctnetlink v0.93: registering with nfnetlink.
[ 21.076392] PPP generic driver version 2.4.2
[ 21.081613] PPP MPPE Compression module registered
[ 21.087336] NET: Registered protocol family 24
[ 21.092665] PPTP driver version 0.8.5
[ 21.097987] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 21.104286] whnat_module_init(): module init and register callback for whnat
[ 21.111507] create whnat_ctrl ok!!!
[ 21.115080] wed_slot_map_get(): assign slot_id:0 for entry: 0!
[ 21.121073] wed_slot_map_get(): assign slot_id:1 for entry: 1!
[ 21.127037] whnat_hif_pcie_mirror_probe(): hif_cfg base addr=ffffff8009790400
[ 21.135867] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 22.862573] [mtfwd] update eth interface eth0
[ 27.694900] device eth0.0 entered promiscuous mode
[ 27.727335] device eth0 entered promiscuous mode
[ 27.740507] br-lan: port 1(eth0.0) entered forwarding state
[ 27.746221] br-lan: port 1(eth0.0) entered forwarding state
[ 27.820014] device eth0.4095 entered promiscuous mode
[ 27.827696] br-lan: port 2(eth0.4095) entered forwarding state
[ 27.833643] br-lan: port 2(eth0.4095) entered forwarding state
[ 29.747279] br-lan: port 1(eth0.0) entered forwarding state
[ 29.835292] br-lan: port 2(eth0.4095) entered forwarding state
[ 30.723532] ra0: ===> main_virtual_if_open
[ 30.727857] load l1profile succeed!
[ 31.363861] APWdsInitialize():WdsEntry Number=4
[ 31.369372] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860/RT2860_5G.dat
[ 31.387293] Open file "/etc/Wireless/RT2860/RT2860_5G.dat" failed!
[ 31.403906] E2pAccessMode=2
[ 31.406976] SSID[0]=NETGEARFDD730, EdcaIdx=0
[ 31.419354] SSID[1]=NETGEARFDD730-2, EdcaIdx=0
[ 31.424485] SSID[2]=NETGEARFDD730-3, EdcaIdx=0
[ 31.435470] DBDC Mode=0, eDBDC_mode = 0
[ 31.443464] BSS0 PhyMode=14
[ 31.446262] wmode_band_equal(): Band Equal!
[ 31.459336] auto_ch_select_set_cfg(): BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3
[ 31.475291] auto_ch_select_set_cfg(): BandIdx1, AutoChannelAtBootup=0, AutoChannelAlg = 0
[ 31.495967] BandSteering=0
[ 31.498724] BndStrgBssIdx=
[ 31.503468] [TxPower] BAND0: 100
[ 31.507018] Power Boost (CCK, OFDM): RTMPSetProfileParametersPower Boost (HT20): RTMPSetProfileParametersPower Boost (HT40): RTMPSetProfileParametersPower Boost (VHT20): RTMPSetProfileParametersPower Boost (VHT40): RTMPSetProfileParametersPower Boost (VHT80): RTMPSetProfileParametersPower Boost (VHT160): RTMPSetProfileParameters[CCKTxStream] BAND0: 4
[ 31.581734] [PERCENTAGEenable] BAND0: 1
[ 31.595326] [BFBACKOFFenable] BAND0: 1
[ 31.599697] FragThreshold[0]=2346
[ 31.615047] DfsZeroWait Support=0/0
[ 31.624319] read_etxbf: ETxBfEnCond = 0
[ 31.631260] read_etxbf: BSSID[0]
[ 31.634486] read_etxbf: MBSS[0] ETxBfEnCond = 0
[ 31.647328] read_etxbf: More BSSID[1]
[ 31.650992] read_etxbf: More MBSS[1] ETxBfEnCond = 0
[ 31.663714] read_etxbf: More BSSID[2]
[ 31.671329] read_etxbf: More MBSS[2] ETxBfEnCond = 0
[ 31.708251] MAP_MODE=0
[ 31.720547] If/wds0 - PeerPhyOpMode=255
[ 31.725564] APWdsInitialize():WdsEntry Number=4
[ 31.730140] WDS-Enable mode=0
[ 31.747381] AndesSendCmdMsg: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
[ 31.767284] AndesSendCmdMsg: Command type = ed, Extension command type = 48
[ 31.776844] HT: WDEV[0] Ext Channel = ABOVE
[ 31.781174] HT: greenap_cap = 1
[ 31.795381] ChipI=7622, Value=0, pcie_aspm in profile=0
[ 31.850239] ICapMode = 0
[ 31.861664] WtcSetMaxStaNum: BssidNum:3, MaxStaNum:123 (WdsNum:4, ApcliNum:1, MaxNumChipRept:16), MinMcastWcid:124
[ 31.891477] Fair Queueing Scheduler Initialization...
[ 31.896746] Top Init Done!
[ 31.903269] Use dev_alloc_skb
[ 31.906585] RX[0] DESC ffffffc018baa000 size = 8192
[ 31.921164] RX[1] DESC ffffffc0184f0000 size = 8192
[ 31.931435] cut_through_init(): ct sw token number = 4095
[ 31.943456] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
[ 31.956789] cut_through_token_list_init(): ffffffc01de92a90,ffffffc01de92a90
[ 31.975433] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
[ 31.991270] cut_through_token_list_init(): ffffffc01de92ab0,ffffffc01de92ab0
[ 32.003365] Hif Init Done!
[ 32.006076] ctl->txq = ffffff800b3679c8
[ 32.019262] ctl->rxq = ffffff800b3679e0
[ 32.023100] ctl->ackq = ffffff800b3679f8
[ 32.035262] ctl->kickq = ffffff800b367a10
[ 32.043278] ctl->tx_doneq = ffffff800b367a28
[ 32.055294] ctl->rx_doneq = ffffff800b367a40
[ 32.059775] mt_rbus 0000:00:00.0: Direct firmware load for mt7622_patch_e2_hdr.bin failed with error -2
[ 32.079282] Parsing patch header
[ 32.082520] Built date: 20200821025910a
[ 32.092836]
[ 32.094323] Platform: ALPS
[ 32.103861] HW/SW version: 0x8a108a10
[ 32.107669] Patch version: 0x00000010
[ 32.115444] Target address: 0x9c000, length: 82080
[ 32.127622] patch is not ready && get semaphore success
[ 32.143343] EventGenericEventHandler: CMD Success
[ 32.148821] MtCmdPatchFinishReq
[ 32.163299] EventGenericEventHandler: CMD Success
[ 32.168118] release patch semaphore
[ 32.171644] WfMcuHwInit: Before NICLoadFirmware, check ICapMode = 0
[ 32.177970] Parsing CPU 0 fw tailer
[ 32.187292] Chip ID: 0x06
[ 32.190014] Eco version: 0x00
[ 32.195860] Region number: 0x00
[ 32.199093] Format version: 0x00
[ 32.211808] Ram version: _reserved_
[ 32.219493] Built date: 20200821030117
[ 32.227458] Common crc: 0x0
[ 32.230338] Parsing tailer region 0
[ 32.239263] Feature set: 0x01
[ 32.242365] Target address: 0xb7000, Download size: 249856
[ 32.255266] Parsing tailer region 1
[ 32.258757] Feature set: 0x01
[ 32.267801] Target address: 0x203dc00, Download size: 50384
[ 32.283327] EventGenericEventHandler: CMD Success
[ 32.292091] EventGenericEventHandler: CMD Success
[ 32.297210] MtCmdFwStartReq: override = 0x0, address = 0x0
[ 32.344242] EventGenericEventHandler: CMD Success
[ 32.349001] MCU Init Done!
[ 32.351739] efuse_probe: efuse = 2
[ 32.355141] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4
[ 32.363303] RtmpEepromGetDefault::e2p_dafault=2
[ 32.371507] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2
[ 32.387359] NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x0]
[ 32.403517] NICReadEEPROMParameters: EEPROM 0x52 bb00
[ 32.415271] mt7622_pa_lna_set(): read antCtrl = 0, polCtrl = 4, wifiStreams = 44
[ 32.431304] mt7622_tssi_set(): nic_cfg1=20, mode=1
[ 35.944826] Country Region from e2p = 0
[ 35.948747] read sub id = 2
[ 35.951588] RcRadioInit(): DbdcMode=0, ConcurrentBand=1
[ 35.967321] RcRadioInit(): pRadioCtrl=ffffffc018be91d8,Band=0,rfcap=1,channel=1,PhyMode=2 extCha=0xf
[ 35.983321] MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!!
[ 36.008471] MtBfBackOffLoadParam: RF_LOCKDOWN Feature OFF !!!
[ 36.014436] EEPROM Init Done!
[ 36.017532] mt_mac_init()-->
[ 36.022201] mt7622_init_mac_cr(): TMAC_TRCR0=0x82783c8c
[ 36.028363] <--mt_mac_init()
[ 36.053973] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[ 36.071169] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[ 36.088363] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[ 36.094963] MAC Init Done!
[ 36.097733] MT7622BBPInit() todo
[ 36.100966] PHY Init Done!
[ 36.111482] MtCmdSetMacTxRx:(ret = 0)
[ 36.115383] ap_ftkd> Initialize FT KDP Module...
[ 36.120360] Main bssid = 00:00:00:00:00:00
[ 36.127319] MtCmdSetMacTxRx:(ret = 0)
[ 36.139365] MtCmdSetMacTxRx:(ret = 0)
[ 36.143051] <==== mt_wifi_init, Status=0
[ 36.149726] TxBfModuleEnCtrl:It's not DBDC mode
[ 36.159441] MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
[ 36.167398] MtCmdEDCCACtrl: BandIdx: 1, EDCCACtrl: 1
[ 36.183366] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
[ 36.203517] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
[ 36.217663] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
[ 36.230500] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
[ 36.250971] Total allocated 4 WDS interfaces!
[ 36.260933] WtcSetMaxStaNum: BssidNum:3, MaxStaNum:123 (WdsNum:4, ApcliNum:1, MaxNumChipRept:16), MinMcastWcid:124
[ 36.305394] RedInit: set Driver/N9 RED Enable to 1.
[ 36.310335] RedInit: RED Initiailize Done.
[ 36.317654] cp_support_is_enabled: set Driver CP_SUPPORT to Mode 2.
[ 36.325343] RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
[ 36.332359] wifi_sys_open(), wdev idx = 0
[ 36.343386] wdev_attr_update(): wdevId0 = c8:9e:43:fd:d7:32
[ 36.350948] [RcGetHdevByPhyMode] channel 0 fix for rdev fetching
[ 36.357284] [RadarStateCheck] RD_NORMAL_MODE
[ 36.363489] phy_freq_adjust : no prim_ch value for adjust!
[ 36.377261] Caller: wlan_operate_init+0xdc/0x118 [mt7622_mt_wifi]
[ 36.384000] phy_mode=14, ch=0, wdev_type=1
[ 36.388236] ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=0
[ 36.398160] ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
[ 36.414924] AP inf up for ra_0(func_idx) OmacIdx=0
[ 36.422077] mtd_isr::DriverOwn = TRUE
[ 36.428051] AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
[ 36.439570] ApAutoChannelAtBootUp----------------->
[ 36.444479] ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1
[ 36.452171] MtCmdSetMacTxRx:(ret = 0)
[ 36.455901] MtCmdChannelSwitch: control_chl = 1,control_ch2=0, central_chl = 1 DBDCIdx= 0, Band= 0
[ 36.470831] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 36.735347] MtCmdChannelSwitch: control_chl = 2,control_ch2=0, central_chl = 2 DBDCIdx= 0, Band= 0
[ 36.751241] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 36.983325] MtCmdChannelSwitch: control_chl = 3,control_ch2=0, central_chl = 3 DBDCIdx= 0, Band= 0
[ 36.999296] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 37.231345] MtCmdChannelSwitch: control_chl = 4,control_ch2=0, central_chl = 4 DBDCIdx= 0, Band= 0
[ 37.247298] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 37.479300] MtCmdChannelSwitch: control_chl = 5,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0
[ 37.488284] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 37.727315] MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0
[ 37.743311] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 37.975321] MtCmdChannelSwitch: control_chl = 7,control_ch2=0, central_chl = 7 DBDCIdx= 0, Band= 0
[ 37.991284] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 38.223696] MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0
[ 38.233221] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 38.463363] MtCmdChannelSwitch: control_chl = 9,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0
[ 38.487317] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 38.711346] MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0
[ 38.723996] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 38.947328] MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 11 DBDCIdx= 0, Band= 0
[ 38.957228] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 39.179328] ====================================================================
[ 39.192009] Channel 1 : Busy Time = 1876, Skip Channel = FALSE, BwCap = TRUE
[ 39.207330] Channel 2 : Busy Time = 2028, Skip Channel = FALSE, BwCap = TRUE
[ 39.221544] Channel 3 : Busy Time = 1514, Skip Channel = FALSE, BwCap = TRUE
[ 39.237033] Channel 4 : Busy Time = 1411, Skip Channel = FALSE, BwCap = TRUE
[ 39.245633] Channel 5 : Busy Time = 1671, Skip Channel = FALSE, BwCap = TRUE
[ 39.262117] Channel 6 : Busy Time = 703, Skip Channel = FALSE, BwCap = TRUE
[ 39.275394] Channel 7 : Busy Time = 917, Skip Channel = FALSE, BwCap = TRUE
[ 39.286389] Channel 8 : Busy Time = 975, Skip Channel = FALSE, BwCap = TRUE
[ 39.301681] Channel 9 : Busy Time = 1024, Skip Channel = FALSE, BwCap = TRUE
[ 39.310251] Channel 10 : Busy Time = 602, Skip Channel = FALSE, BwCap = TRUE
[ 39.317764] Channel 11 : Busy Time = 527, Skip Channel = FALSE, BwCap = TRUE
[ 39.339332] ====================================================================
[ 39.347696] Rule 3 Channel Busy time value : Select Primary Channel 11
[ 39.354274] Rule 3 Channel Busy time value : Min Channel Busy = 527
[ 39.360884] Rule 3 Channel Busy time value : BW = 20
[ 39.366747] [SelectClearChannelBusyTime] - band0 END
[ 39.371756] ApAutoChannelAtBootUp : Auto channel selection: Selected channel = 11, IsAband = 0
[ 39.380694] AutoChSelUpdateChannel(): Update channel for wdev for this band PhyMode = 14, Channel = 11
[ 39.391182] MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0
[ 39.400413] BW = 1,TXStream = 4, RXStream = 4, scan(0)
[ 39.418056] ApAutoChannelAtBootUp<-----------------
[ 39.423085] [PMF]APPMFInit:: apidx=0, MFPC=1, MFPR=0, SHA256=0
[ 39.429349] [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNIE
[ 39.438040] wifi_sys_linkup(), wdev idx = 0
[ 39.443713] wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
[ 39.443713] LinkToOmacIdx = 0, LinkToWdevType = 1
[ 39.509397] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
[ 39.571526] UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
[ 39.577409] APStartUpForMbss: BssIndex = 0 channel = 11
[ 39.582927] MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0
[ 39.589009] TxCCKStreamCtrl: set wrong parameters
[ 39.596582] Enable 20/40 BSSCoex Channel Scan(BssCoex=1)
[ 39.609460] MtCmdSetMacTxRx:(ret = 0)
[ 39.613216] MtCmdChannelSwitch: control_chl = 4,control_ch2=0, central_chl = 4 DBDCIdx= 0, Band= 0
[ 39.622240] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 39.667430] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 40.003338] MtCmdChannelSwitch: control_chl = 5,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0
[ 40.014436] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 40.051796] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 40.403344] MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0
[ 40.414841] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 40.448136] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 40.779339] MtCmdChannelSwitch: control_chl = 7,control_ch2=0, central_chl = 7 DBDCIdx= 0, Band= 0
[ 40.788482] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 40.821747] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 41.151327] MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0
[ 41.160386] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 41.199381] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 41.543333] MtCmdChannelSwitch: control_chl = 9,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0
[ 41.552435] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 41.569839] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 41.895352] MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0
[ 41.907321] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 41.924754] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 42.271318] MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 11 DBDCIdx= 0, Band= 0
[ 42.280595] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 42.303892] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 42.639348] Channel[Idx=3, Ch=4].bEffectedChannel=0x0!
[ 42.644564] Channel[Idx=4, Ch=5].bEffectedChannel=0x0!
[ 42.649797] Channel[Idx=5, Ch=6].bEffectedChannel=0x0!
[ 42.655005] Channel[Idx=6, Ch=7].bEffectedChannel=0x0!
[ 42.660254] Channel[Idx=7, Ch=8].bEffectedChannel=0x0!
[ 42.665455] Channel[Idx=8, Ch=9].bEffectedChannel=0x0!
[ 42.670668] Channel[Idx=9, Ch=10].bEffectedChannel=0x0!
[ 42.675928] Channel[Idx=10, Ch=11].bEffectedChannel=0x0!
[ 42.681312] MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0
[ 42.690428] BW = 1,TXStream = 4, RXStream = 4, scan(0)
[ 42.707809] apidx 0 for WscUUIDInit
[ 42.711370] Generate UUID for apidx(0)
[ 42.715198] mtk_ppe_dev_register_hook : ineterface ra0 register (1)
[ 42.722146] add tx_src: c8:9e:43:fd:d7:32
[ 42.726329] Mac: c8:9e:43:fd:d7:32 was aleady existed.
[ 42.735752] Mac: c8:9e:43:fd:d7:32 was aleady existed.
[ 42.759782] Mac: c8:9e:43:fd:d7:32 was aleady existed.
[ 42.781069] add tx_src: ce:8e:43:fd:d7:32
[ 42.788451] nf_unregister_hooks()
[ 42.799374] rai0: ===> main_virtual_if_open
[ 42.807438] RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT
[ 42.818562] load l1profile succeed!
[ 42.822315] WHNAT=1
[ 42.825804] whnat_cap_support(): chip_id=7915 is in WHNAT support list
[ 42.838491] wifi_slot_get(): bus name=PCI Bus 0001:01, funid=0, get slot id=0
[ 42.854398] whnat_entry_acquire(): PCIE SLOT:0, hook to WHNAT,entry id=0
[ 42.862870] wed_init(0): irq=13,base_addr=0xffffff800b5fa000
[ 42.874056] wed_ring_init(): wed ring init result = 0
[ 42.891999] create wed ok!!!
[ 42.895055] wdma_init(): wdma(0) base addr=ffffff800b70c800
[ 42.901009] wdma_init(): wdma(0) irq[0]=254
[ 42.905311] wdma_init(): wdma(0) irq[1]=255
[ 42.909700] wdma_init(): wdma(0) irq[2]=256
[ 42.914591] wifi_chip_probe(): Chang CHIP IRQ: 260 to WHNAT IRQ: 13
[ 42.921170] wifi_slot_get(): bus name=PCI Bus 0001:01, funid=0, get slot id=0
[ 42.928714] whnat_probe(): probe fail since whnat is full!
[ 42.934244] whnat_dev0: probe of 1020a000.wed2 failed with error -1
[ 42.940811] mt_service_open: wlan service opens successfully!
[ 42.949816] APWdsInitialize():WdsEntry[0~15]
[ 42.955989] BssidNum=3
[ 42.958349] Pf2MbssIdxMap:
[ 42.962220] 0 1 2
[ 42.965529] E2pAccessMode=2
[ 42.969071] SSID[0]=NETGEARFDD730, EdcaIdx=0
[ 42.973490] SSID[1]=NETGEARFDD730-2, EdcaIdx=0
[ 42.978324] SSID[2]=NETGEARFDD730-3, EdcaIdx=0
[ 42.983340] RTMPSetProfileParameters(): DBDC Mode=0, eDBDC_mode = 0
[ 42.990236] cfg_mode=17
[ 42.992737] cfg_mode=17
[ 42.995181] Final: Apcli0, PhyMode=177
[ 42.998964] Final: Apcli1, PhyMode=177
[ 43.002782] Final: BSS0, PhyMode=177
[ 43.006692] Final: BSS1, PhyMode=177
[ 43.010373] Final: BSS2, PhyMode=177
[ 43.014514] auto_ch_select_set_cfg(): BandIdx0, AutoChannelAtBootup=0, AutoChannelAlg = 0
[ 43.022763] auto_ch_select_set_cfg(): BandIdx1, AutoChannelAtBootup=0, AutoChannelAlg = 0
[ 43.031384] Index0 Channel=153
[ 43.034974] BandSteering=0
[ 43.037758] BndStrgBssIdx=
[ 43.040604] [TxPower] BAND0: 100
[ 43.046753] [SKUenable] BAND0: 1
[ 43.050184] [SkuTableIdx]: 1
[ 43.053190] [CCKTxStream] BAND0: 4
[ 43.056752] [PERCENTAGEenable] BAND0: 1
[ 43.061011] [BFBACKOFFenable] BAND0: 1
[ 43.066555] [Disable160RuMu] BAND0: 1
[ 43.070762] [MaxRuOfdma] BAND0: 8
[ 43.074281] [MaxDLMuMimo] BAND0: 4
[ 43.077863] [MaxULMuMimo] BAND0: 2
[ 43.081848] profile: FragThreshold[0]=2346
[ 43.086858] APEdca0
[ 43.089164] APEdca1
[ 43.091543] APEdca2
[ 43.093796] APEdca3
[ 43.098339] UAPSDCapable[0]=1
[ 43.101409] UAPSDCapable[1]=1
[ 43.104422] UAPSDCapable[2]=1
[ 43.108165] UAPSDCapable[3]=1
[ 43.111133] UAPSDCapable[4]=1
[ 43.114879] UAPSDCapable[5]=1
[ 43.117911] UAPSDCapable[6]=1
[ 43.120896] UAPSDCapable[7]=1
[ 43.123949] UAPSDCapable[8]=1
[ 43.126914] UAPSDCapable[9]=1
[ 43.129935] UAPSDCapable[10]=1
[ 43.133514] UAPSDCapable[11]=1
[ 43.136627] UAPSDCapable[12]=1
[ 43.139906] UAPSDCapable[13]=1
[ 43.142962] UAPSDCapable[14]=1
[ 43.146969] UAPSDCapable[15]=1
[ 43.150098] UAPSDCapable[16]=1
[ 43.153920] UAPSDCapable[17]=1
[ 43.157032] UAPSDCapable[18]=1
[ 43.161019] UAPSDCapable[19]=1
[ 43.164957] UAPSDCapable[20]=1
[ 43.168068] UAPSDCapable[21]=1
[ 43.171120] UAPSDCapable[22]=1
[ 43.175107] UAPSDCapable[23]=1
[ 43.179625] UAPSDCapable[24]=1
[ 43.182681] UAPSDCapable[25]=1
[ 43.185766] UAPSDCapable[26]=1
[ 43.189146] UAPSDCapable[27]=1
[ 43.192270] UAPSDCapable[28]=1
[ 43.196223] UAPSDCapable[29]=1
[ 43.199309] UAPSDCapable[30]=1
[ 43.202362] UAPSDCapable[31]=1
[ 43.206323] default ApCliUAPSDCapable[0]=1
[ 43.211891] default ApCliUAPSDCapable[1]=1
[ 43.216792] DfsZeroWait Support=0/0
[ 43.221396] DfsZeroWaitCacTime=255/255
[ 43.225720] read_itxbf: ITxBfEn = 1
[ 43.229788] read_itxbf: BSSID[0]
[ 43.233101] read_itxbf: MBSS[0] ITxBfEn = 1
[ 43.237373] read_itxbf: More BSSID[1]
[ 43.241127] read_itxbf: More MBSS[1] ITxBfEn = 1
[ 43.245808] read_itxbf: More BSSID[2]
[ 43.249515] read_itxbf: More MBSS[2] ITxBfEn = 1
[ 43.254190] read_itxbf: Common.ITxBfEn = 1
[ 43.258704] read_etxbf: ETxBfEnCond = 1
[ 43.262626] read_etxbf: BSSID[0]
[ 43.265940] read_etxbf: MBSS[0] ETxBfEnCond = 1
[ 43.271296] read_etxbf: More BSSID[1]
[ 43.274963] read_etxbf: More MBSS[1] ETxBfEnCond = 1
[ 43.281339] read_etxbf: More BSSID[2]
[ 43.285047] read_etxbf: More MBSS[2] ETxBfEnCond = 1
[ 43.290560] HeraStbcPriority[0] = 0
[ 43.296613] MBSS[0] MuOfdmaDlEnable = 0
[ 43.300510] More MBSS[1] MuOfdmaDlEnable = 0
[ 43.306539] More MBSS[2] MuOfdmaDlEnable = 0
[ 43.311016] MBSS[0] MuOfdmaUlEnable = 0
[ 43.315681] More MBSS[1] MuOfdmaUlEnable = 0
[ 43.320012] More MBSS[2] MuOfdmaUlEnable = 0
[ 43.325757] MBSS[0] MuMimoDlEnable = 1
[ 43.330015] More MBSS[1] MuMimoDlEnable = 1
[ 43.334856] More MBSS[2] MuMimoDlEnable = 1
[ 43.340694] MBSS[0] MuMimoUlEnable = 1
[ 43.345199] More MBSS[1] MuMimoUlEnable = 1
[ 43.350529] More MBSS[2] MuMimoUlEnable = 1
[ 43.381673] [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=1
[ 43.393493] [PMF]Set_PMFMFPC_Proc:: apidx=1, Desired MFPC=1
[ 43.399189] [PMF]Set_PMFMFPC_Proc:: apidx=2, Desired MFPC=1
[ 43.405568] [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0
[ 43.411297] [PMF]Set_PMFMFPR_Proc:: apidx=1, Desired MFPR=0
[ 43.416986] [PMF]Set_PMFMFPR_Proc:: apidx=2, Desired MFPR=0
[ 43.422768] [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0
[ 43.429026] [PMF]Set_PMFSHA256_Proc:: apidx=1, Desired PMFSHA256=0
[ 43.435312] [PMF]Set_PMFSHA256_Proc:: apidx=2, Desired PMFSHA256=0
[ 43.443413] MAP_MODE=0
[ 43.445918] ApCliEntry[0].Enable=0
[ 43.451399] APCLI[0] ApCliMuOfdmaDlEnable = 1
[ 43.456693] APCLI[0] ApCliMuOfdmaUlEnable = 0
[ 43.462009] APCLI[0] ApCliMuMimoDlEnable = 0
[ 43.467302] APCLI[0] ApCliMuMimoUlEnable = 0
[ 43.473251] rtmp_read_wds_from_file(): WDS Profile
[ 43.478262] WDS Number: band[0]=0, band[1]=0
[ 43.483480] WDS-Enable mode=0
[ 43.488200] If/wds0 - PeerPhyMode=0xb1
[ 43.494437] HT_BAWinSize: wdev[0]: (TX=256, RX=256)
[ 43.500326] HT: WDEV[0] Ext Channel = ABOVE
[ 43.505590] HT: greenap_cap = 0
[ 43.510259] 0:rai0 TWTsupport = 0
[ 43.515077] 1:(null) TWTsupport = 0
[ 43.518982] 2:(null) TWTsupport = 0
[ 43.579399] ICapMode = 0
[ 43.589411] rtmp_read_mlme_multiqueue_parms_from_file(): Mlme.MultiQEnable=1
[ 43.597510] rtmp_read_mlme_multiqueue_parms_from_file(): [hp_q_ration]-[np_q_ration]-[lp_q_ration] = 8-4-1
[ 43.608241] WtcSetMaxStaNum: MaxStaNum:235, BssidNum:3, WdsNum:16, MSTANum:1, MaxNumChipRept:32, MinMcastWcid:284
[ 43.621143] Top Init Done!
[ 43.624231] Use dev_alloc_skb
[ 43.627209] token_tx_queue_init(): ct sw token number = 1023
[ 43.633793] token_tx_queue_init(): token que inited done!id_head/tail=0/1024
[ 43.641748] token_tx_queue_init(): ffffffc00325fa08,ffffffc00325fa08
[ 43.651178] TxRing[0]: attr:0, total 2048 entry initialized
[ 43.658450] TxRing[1]: attr:0, total 2048 entry initialized
[ 43.666934] RX[0] DESC ffffff8009689000 size = 24576
[ 43.675188] RX[1] DESC ffffff8009690000 size = 24576
[ 43.682957] RX[2] DESC ffffff8009697000 size = 8192
[ 43.688204] RX[3] DESC ffffff800969a000 size = 16384
[ 43.693940] RX[4] DESC ffffff800969f000 size = 8192
[ 43.699578] -->TX_RING_0[0xd7300]: Attr:0, Base=0x5a518000, Cnt=2048!
[ 43.706135] -->TX_RING_1[0xd7310]: Attr:0, Base=0x5a580000, Cnt=2048!
[ 43.712678] -->TX_RING_2[0xd5400]: Attr:3, Base=0x5a452000, Cnt=128!
[ 43.719082] -->TX_RING_3[0xd5410]: Attr:2, Base=0x5a453000, Cnt=256!
[ 43.726538] -->TX_RING_4[0xd5440]: Attr:1, Base=0x5a454000, Cnt=256!
[ 43.733600] -->RX_RING_0[0xd4500]: Base=0x5a598000, Cnt=1536
[ 43.739358] -->RX_RING_1[0xd4510]: Base=0x5a498000, Cnt=1536
[ 43.745129] -->RX_RING_2[0xd5500]: Base=0x5a4a6000, Cnt=512
[ 43.750780] -->RX_RING_3[0xd7410]: Base=0x5a4a8000, Cnt=1024
[ 43.756503] -->RX_RING_4[0xd5520]: Base=0x5d244000, Cnt=512
[ 43.756512] wdma_dma_ctrl(): WDMA_GLO_CFG=40000450
[ 43.756551] Hif Init Done!
[ 43.759682] pci_driver_own_by_port: success to clear p=0 fw own, from(1): 1 is interrupt mode, 2 is polling mode.
[ 43.759685] driver_own: port=1 is not enabled
[ 43.759688] fw_prepare():using E2 ROM patch
[ 43.759689] fw_prepare():using E2 RAM
[ 43.759707] Parsing patch header
[ 43.759752] Built date: 20201105222230a
[ 43.759752]
[ 43.759755] Platform: ALPS
[ 43.759761] HW/SW version: 0x8a108a10
[ 43.759765] Patch version: 0xffffffff
[ 43.759767] Section num: 0x2, subsys: 0x4
[ 43.759772] Section 0: type = 0x30002, offset = 0xe0, size = 0xfc90
[ 43.759774] Target address: 0x200000, length: 0xfc90
[ 43.759776] Section 1: type = 0x30002, offset = 0xfd70, size = 0x13720
[ 43.759778] Target address: 0xe000f000, length: 0x13720
[ 43.759935] Patch SEM Status = 2
[ 43.767303] patch is not ready && get semaphore success
[ 43.767313] Start address = 0x200000, DL length = 64656, Data mode = 0x80000000
[ 43.768527] EventGenericEventHandler: CMD Success
[ 43.772519] MtCmdAddressLenReq:(ret = 0)
[ 43.772780] Start address = 0xe000f000, DL length = 79648, Data mode = 0x80000000
[ 43.773957] EventGenericEventHandler: CMD Success
[ 43.775568] MtCmdAddressLenReq:(ret = 0)
[ 43.775843] MtCmdPatchFinishReq
[ 43.779656] EventGenericEventHandler: CMD Success
[ 43.786409] Patch SEM Status = 3
[ 43.790721] release patch semaphore
[ 43.790736] WfMcuHwInit: Before NICLoadFirmware, check ICapMode = 0
[ 43.790755] Parsing CPU 0 fw tailer
[ 43.790761] Chip ID: 0x0b
[ 43.790764] Eco version: 0x01
[ 43.790766] Region number: 0x07
[ 43.790768] Format version: 0x02
[ 43.790771] Format flag: 0x01
[ 43.790777] Ram version: ____000000
[ 43.790784] Built date: 20201105222304
[ 43.790785] Common crc: 0xaa870ac
[ 43.790788] Parsing tailer region 0
[ 43.790790] Decomp crc: 0x0
[ 43.790791] Decomp size: 0x0
[ 43.790792] Decomp block size: 0x0
[ 43.790793] Target address: 0x21fc00
[ 43.790795] Download size: 110592
[ 43.790797] Feature set: 0x20
[ 43.790798] Parsing tailer region 1
[ 43.790799] Decomp crc: 0x0
[ 43.790800] Decomp size: 0x0
[ 43.790801] Decomp block size: 0x0
[ 43.790803] Target address: 0x31dc00
[ 43.790804] Download size: 205824
[ 43.790806] Feature set: 0x00
[ 43.790807] Parsing tailer region 2
[ 43.790808] Decomp crc: 0x0
[ 43.790809] Decomp size: 0x0
[ 43.790810] Decomp block size: 0x0
[ 43.790811] Target address: 0x417400
[ 43.790812] Download size: 31744
[ 43.790814] Feature set: 0x00
[ 43.790815] Parsing tailer region 3
[ 43.790816] Decomp crc: 0x0
[ 43.790817] Decomp size: 0x0
[ 43.790818] Decomp block size: 0x0
[ 43.790819] Target address: 0xe0022800
[ 43.790820] Download size: 411136
[ 43.790823] Feature set: 0x00
[ 43.790824] Parsing tailer region 4
[ 43.790825] Decomp crc: 0x0
[ 43.790826] Decomp size: 0x0
[ 43.790827] Decomp block size: 0x0
[ 43.790828] Target address: 0xe0086e00
[ 43.790829] Download size: 332288
[ 43.790831] Feature set: 0x00
[ 43.790833] Parsing tailer region 5
[ 43.790834] Decomp crc: 0x0
[ 43.790835] Decomp size: 0x0
[ 43.790836] Decomp block size: 0x0
[ 43.790837] Target address: 0x23ac00
[ 43.790838] Download size: 87040
[ 43.790840] Feature set: 0x00
[ 43.790841] Parsing tailer region 6
[ 43.790842] Decomp crc: 0x0
[ 43.790843] Decomp size: 0x0
[ 43.790844] Decomp block size: 0x0
[ 43.790845] Target address: 0x400000
[ 43.790846] Download size: 81920
[ 43.790849] Feature set: 0x00
[ 43.790851] Release info: header tag = 0, total length = 68
[ 43.790853] tag 1, padding length = 3, tag length = 61
[ 43.790881] payload: t-neptune-main-mt7915-1953-MT7915D_1953_MT7621-20201105221902
[ 43.790885] Start address = 0x21fc00, DL length = 110592, Data mode = 0x80000000
[ 43.792101] EventGenericEventHandler: CMD Success
[ 43.795178] MtCmdAddressLenReq:(ret = 0)
[ 43.795572] Start address = 0x31dc00, DL length = 205824, Data mode = 0x80000000
[ 43.796776] EventGenericEventHandler: CMD Success
[ 43.799352] MtCmdAddressLenReq:(ret = 0)
[ 43.799996] Start address = 0x417400, DL length = 31744, Data mode = 0x80000000
[ 43.801248] EventGenericEventHandler: CMD Success
[ 43.801283] MtCmdAddressLenReq:(ret = 0)
[ 43.801445] Start address = 0xe0022800, DL length = 411136, Data mode = 0x80000000
[ 43.802655] EventGenericEventHandler: CMD Success
[ 43.802687] MtCmdAddressLenReq:(ret = 0)
[ 43.804678] Start address = 0xe0086e00, DL length = 332288, Data mode = 0x80000000
[ 43.805880] EventGenericEventHandler: CMD Success
[ 43.805911] MtCmdAddressLenReq:(ret = 0)
[ 43.807485] Start address = 0x23ac00, DL length = 87040, Data mode = 0x80000000
[ 43.808695] EventGenericEventHandler: CMD Success
[ 43.808715] MtCmdAddressLenReq:(ret = 0)
[ 43.809094] Start address = 0x400000, DL length = 81920, Data mode = 0x80000000
[ 43.810294] EventGenericEventHandler: CMD Success
[ 43.810313] MtCmdAddressLenReq:(ret = 0)
[ 43.810687] MtCmdFwStartReq: override = 0x1, address = 0x21fc00
[ 43.811880] EventGenericEventHandler: CMD Success
[ 43.811896] Parsing CPU 1 fw tailer
[ 43.811902] Chip ID: 0x00
[ 43.811904] Eco version: 0x01
[ 43.811907] Region number: 0x03
[ 43.811909] Format version: 0x02
[ 43.811911] Format flag: 0x01
[ 43.811917] Ram version: DEV_000000
[ 43.811925] Built date: 20201105222323
[ 43.811926] Common crc: 0x8fcbc5ad
[ 43.811928] Parsing tailer region 0
[ 43.811929] Decomp crc: 0x0
[ 43.811930] Decomp size: 0x0
[ 43.811932] Decomp block size: 0x0
[ 43.811933] Target address: 0x10200000
[ 43.811934] Download size: 88512
[ 43.811936] Feature set: 0x00
[ 43.811937] Parsing tailer region 1
[ 43.811938] Decomp crc: 0x0
[ 43.811939] Decomp size: 0x0
[ 43.811940] Decomp block size: 0x0
[ 43.811942] Target address: 0x10300000
[ 43.811943] Download size: 19392
[ 43.811945] Feature set: 0x00
[ 43.811946] Parsing tailer region 2
[ 43.811947] Decomp crc: 0x0
[ 43.811948] Decomp size: 0x0
[ 43.811949] Decomp block size: 0x0
[ 43.811950] Target address: 0xe0000000
[ 43.811951] Download size: 8768
[ 43.811953] Feature set: 0x00
[ 43.811956] Release info: header tag = 0, total length = 0
[ 43.811958] Start address = 0x10200000, DL length = 88512, Data mode = 0x80000010
[ 43.813159] EventGenericEventHandler: CMD Success
[ 43.813573] MtCmdAddressLenReq:(ret = 0)
[ 43.813926] Start address = 0x10300000, DL length = 19392, Data mode = 0x80000010
[ 43.815299] EventGenericEventHandler: CMD Success
[ 43.815324] MtCmdAddressLenReq:(ret = 0)
[ 43.815403] Start address = 0xe0000000, DL length = 8768, Data mode = 0x80000010
[ 43.816665] EventGenericEventHandler: CMD Success
[ 43.816692] MtCmdAddressLenReq:(ret = 0)
[ 43.816762] MtCmdFwStartReq: override = 0x4, address = 0x0
[ 43.916486] EventGenericEventHandler: CMD Success
[ 43.916552] :MtCmdCr4Capability: option(0)
[ 43.916570] MCU Init Done!
[ 43.916602] efuse_probe: efuse = 10000012
[ 43.916605] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
[ 43.916607] RtmpEepromGetDefault::e2p_dafault=1
[ 43.916609] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
[ 43.916617] NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x5000]
[ 43.916626] rtmp_nv_init(): EEPROM Size[131072]
[ 43.919036] [EEPROMImage - PreCalImageInfo - PreCalImage - TxDPDImage]
[ 43.919036] [0xffffffc014280000 - 0xffffffc014280e00 - 0xffffffc014280e10 - 0xffffffc01428d220]
[ 43.919041] validFlashEepromID(): eeFlashId=7915, pAd->ChipID=7915
[ 43.919860] [d-die version:1]
[ 43.953924] [a-die version:2]
[ 44.090817]
[ 44.090827] NICReadEEPROMParameters: EEPROM 0x62 0
****************Start of ping-netgear********************
hostname login: [ 49.354960] Country Region from e2p = 0
[ 49.358813] antenna_default_reset() todo
[ 49.362735] antenna_default_reset() value = 0x2424, TxPath = 4, RxPath = 4
[ 49.369608] RTMPReadTxPwrPerRate(458): Don't Support this now!
[ 49.375439] rc_radio_init(): DBDC MODE=0, ConcurrentBand=1
[ 49.380926] rc_radio_init(): radio_ctrl=ffffffc01a491f00,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf
[ 49.390232] ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0
[ 49.395976] AntCfgInit(2858): Not support for HIF_MT yet!
[ 49.401383] mt7915_check_RF_lock_down: RFlockDown Enable: 0
[ 49.406953] MtReadPwrLimitTable: sku table idx: 1
mt7915_check_RF_lock_down: RFlockDown Enable: 0
[ 49.419217] mt7915_check_RF_lock_down: RFlockDown Enable: 0
[ 49.424789] MtReadPwrLimitTable: sku table idx: 1
mt7915_check_RF_lock_down: RFlockDown Enable: 0
[ 49.437462] EEPROM Init Done!
[ 49.440448] mac_init()-->
[ 49.443062] init_mac_cr()-->
[ 49.445942] <--mac_init()
[ 49.451677] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[ 49.459957] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[ 49.468235] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[ 49.474775] MAC Init Done!
[ 49.477495] BBPInit():BBP Initialization.....
[ 49.481853] Band 0: valid=1, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
[ 49.490034] Band 1: valid=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
[ 49.498235] BBPInit() todo
[ 49.500942] PHY Init Done!
[ 49.507158] tx_pwr_comp_init():NotSupportYet!
[ 49.511737] MtCmdSetMacTxRx:(ret = 0)
[ 49.515629] ap_ftkd> Initialize FT KDP Module...
[ 49.520303] Main bssid = 00:00:00:00:00:00
[ 49.524405] SetMuruPlatformTypeProc: param.ucPlatformType = 2
[ 49.530194] muru_cfg_dlul_limits:(Ret = 1
[ 49.534226] muru_cfg_dlul_limits:(Ret = 1
[ 49.538477] MtCmdSetMacTxRx:(ret = 0)
[ 49.542147] <==== mt_wifi_init, Status=0
[ 49.546069] TxBfModuleEnCtrl:It's not DBDC mode
[ 49.550644] CmdHeraStbcPriorityCtrl: u1BandIdx=0, u1Operation=1, u1StbcPriority=0
[ 49.558148] CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 49.563893] [set_datcfg_ack_cts_timeout](10942): DAT config band(0) cck_timeout Fail!
[ 49.571719] CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 49.577463] [set_datcfg_ack_cts_timeout](10953): DAT config band(0) ofdm_timeout Fail!
[ 49.585375] CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 49.591118] [set_datcfg_ack_cts_timeout](10964): DAT config band(0) ofdma_timeout Fail!
[ 49.599116] CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 49.604864] [set_datcfg_ack_cts_timeout](10942): DAT config band(1) cck_timeout Fail!
[ 49.612690] CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 49.618433] [set_datcfg_ack_cts_timeout](10953): DAT config band(1) ofdm_timeout Fail!
[ 49.626346] CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 49.632093] [set_datcfg_ack_cts_timeout](10964): DAT config band(1) ofdma_timeout Fail!
[ 49.640096] MtCmdSetVht1024QamSupport: Vht1024QamSupport=1
[ 49.645642] Register MBSSID IF 1 (rai1)
[ 49.649708] wdev_init(caller:mbss_create_vif+0x2c0/0x4c0 [mt_wifi]), wdev(1)
[ 49.657329] Register MBSSID IF 2 (rai2)
[ 49.661471] wdev_init(caller:mbss_create_vif+0x2c0/0x4c0 [mt_wifi]), wdev(2)
[ 49.669171] MSTA_Init (1) ---> ApCli
[ 49.672881] Register MSTA IF (apclii0) , pAd->MSTANum = 1
[ 49.678606] wdev_init(caller:MSTA_Init+0x34c/0x5c8 [mt_wifi]), wdev(3)
[ 49.685535] Caller: dump_ht_cap+0x10/0x20 [mt_wifi]
[ 49.690814]
[ 49.690814] phy_mode=177, ch=153, wdev_type=2
[ 49.696760] ht_cap: ht_cap->HtCapInfo,
[ 49.700691] ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
[ 49.708405] ht_cap: ht_cap->HtCapParm,
[ 49.712293] mdpu_density=0, ampdu_factor=3
[ 49.717358] mt_service_init: wlan service inits successfully!
[ 49.723596] WtcSetMaxStaNum: MaxStaNum:235, BssidNum:3, WdsNum:16, MSTANum:1, MaxNumChipRept:32, MinMcastWcid:284
[ 49.856127] RedInit: set CR4/N9 RED Enable to 1.
[ 49.860873] RedInit: RED Initiailize Done.
[ 49.865377] cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 3.
[ 49.871435] RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
[ 49.877950] wifi_sys_open(), wdev idx = 0
[ 49.882064] ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0
[ 49.891362] BuildChannelList() BandIdx = 0, PhyMode = 177, ChListNum = 9:
[ 49.898267] DfsBuildChannelList(): Done
[ 49.902217] phy_oper_init(): operate TxStream = 4, RxStream = 4
[ 49.908368] [RadarStateCheck] RD_NORMAL_MODE
[ 49.914047] mt7915_apply_dpd_flatness_data: eeprom 0x62 bit 0 is 0, do runtime cal
[ 49.921759] MtCmdChannelSwitch: ctrl_chl=153, ctrl_ch2=0, cent_ch=155 DBDCIdx=0, ChBand=1, BW=2, TXStream=4, RXStream=4, scan(0)
[ 50.167880] MtCmdSetTxRxPath: ctrl_chl=153, ctrl_ch2=0, cent_ch=155, RxPath=f, BandIdx=0, ChBand=1, BW=2,TXStream=4, RXStream=15, scan(0)
[ 50.180825] Caller: wlan_operate_init+0xf8/0x130 [mt_wifi]
[ 50.186617]
[ 50.186617] phy_mode=177, ch=153, wdev_type=1
[ 50.192558] ht_cap: ht_cap->HtCapInfo,
[ 50.196478] ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
[ 50.204182] ht_cap: ht_cap->HtCapParm,
[ 50.208135] mdpu_density=5, ampdu_factor=3
[ 50.212381] hw_ctrl_flow_v2_open: wdev_idx=0
[ 50.217040] AP inf up for ra_0(func_idx) OmacIdx=0
[ 50.221960] AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
[ 50.227192] ApAutoChannelAtBootUp----------------->
[ 50.232152] ApAutoChannelAtBootUp: AutoChannelBootup[0] = 0
[ 50.237974] MtCmdSetMacTxRx:(ret = 0)
[ 50.241771] ap_run_at_boot() : ACS is disable !!
[ 50.247499] ===> APStartUpForMbss(caller:ap_inf_open+0x138/0x1c0 [mt_wifi]), mbss_idx:0, CfgMode:0
[ 50.256568] [PMF]APPMFInit:: apidx=0, MFPC=1, MFPR=0, SHA256=0
[ 50.262470] [PMF]PMF_MakeRsnIeGMgmtCipher: Insert BIP to the group management cipher of RSNIE
[ 50.271358] Caller: dump_ht_cap+0x10/0x20 [mt_wifi]
[ 50.276341]
[ 50.276341] phy_mode=177, ch=153, wdev_type=1
[ 50.282407] ht_cap: ht_cap->HtCapInfo,
[ 50.286325] ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
[ 50.294058] ht_cap: ht_cap->HtCapParm,
[ 50.297943] mdpu_density=5, ampdu_factor=3
[ 50.302385] ap_link_up(caller:wdev_do_linkup+0x1c/0x30 [mt_wifi]), wdev(0)
[ 50.309348] wifi_sys_linkup, wdev idx = 0
[ 50.384064] wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:287 for WDEV_TYPE:1
[ 50.384064] LinkToOmacIdx = 0, LinkToWdevType = 1
[ 50.396999] TRTableInsertMcastEntry:band0 group_idx[0]=0
[ 50.402385] wifi_sys_linkup:wdev(type=0,func_idx=1,wdev_idx=0),BssIndex(0)
[ 50.409358] hw_ctrl_flow_v2_link_up: wdev_idx=0
[ 50.414053] (bssUpdateChannel), ucPrimCh=153, ucCentChSeg0=155, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1
[ 50.425619] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320
[ 50.442050] UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (rai0)
[ 50.448494] Band0 BcnInitedRnd = 6
[ 50.452086] MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 0
[ 50.457889] MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 1, BandIdx: 0
[ 50.464355] MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0
[ 50.479444] TxCCKStreamCtrl: set wrong parameters
[ 50.491542] set muru_update_he_cfg()!!!!
[ 50.495524] PrintSrCmd:
[ 50.495524] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 50.495524] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 50.509655] PrintSrCmd:
[ 50.509655] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 50.509655] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 50.524869] PrintSrCmd:
[ 50.524869] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 50.524869] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 50.540240] PrintSrCmd:
[ 50.540240] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 50.540240] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 50.554611] MtCmdTxPwrShowInfo: ucTxPowerInfoCatg: 2, BandIdx: 0
[ 50.560824] apidx 0 for WscUUIDInit
[ 50.564413] [mtf_txpower_all_rate_info] band_idx:0 pwr:41 ChBand:5G ePAGain:0
[ 50.571613] Generate UUID for apidx(0)
[ 50.575468] WDS_Init():wds_num[0]=0, count=0, MAX_WDS_ENTRY=16, if_idx=0, flg_wds_init=0
[ 50.583700] Total allocated 0 WDS(es) for band0!
[ 50.588647] mtk_ppe_dev_register_hook : ineterface rai0 register (2)
[ 50.598787] add tx_src: c8:9e:43:fd:d7:33
[ 51.086869] ra0: ===> main_virtual_if_close
[ 51.091376] wifi_sys_linkdown(), wdev idx = 0
[ 51.118226] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
[ 51.163317] wifi_sys_close(), wdev idx = 0
[ 51.170320] APStop(), oper(0) bssid(0)=c8:9e:43:fd:d7:32
[ 51.175765] wifi_sys_close(), wdev idx = 0
[ 51.185546] ap_ftkd> Release FT KDP Module...
[ 51.194603] wifi_sys_close(), wdev idx = 1
[ 51.198856] wifi_sys_close(), wdev idx = 2
[ 51.203084] <=== APStop()
[ 51.214179] CmdReStartDLRsp: WiFI FW Download Success
[ 51.219624] tx_kickout_fail_count = 0
[ 51.223316] tx_timeout_fail_count = 0
[ 51.226977] rx_receive_fail_count = 0
[ 51.230905] alloc_cmd_msg = 1376
[ 51.236118] free_cmd_msg = 1376
[ 51.239773] cut_through_token_list_destroy(): ffffffc01de92a90,ffffffc01de92a90
[ 51.247470] cut_through_token_list_destroy(): ffffffc01de92ab0,ffffffc01de92ab0
[ 51.563867] RTMP_AllTimerListRelease: Size=33
[ 51.568295] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae73880!
[ 51.575235] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.587625] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae738e0!
[ 51.594574] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.607454] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae7c748!
[ 51.614435] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.627235] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae7c7a8!
[ 51.634200] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.646637] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae85610!
[ 51.653891] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.666338] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae85670!
[ 51.673316] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.685761] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae8e4d8!
[ 51.692724] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.705158] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae8e538!
[ 51.712168] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.724584] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae973a0!
[ 51.731543] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.743958] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae97400!
[ 51.750923] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.763314] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aea0268!
[ 51.770274] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.782695] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aea02c8!
[ 51.789654] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.802621] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aea9130!
[ 51.809617] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.822469] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aea9190!
[ 51.829443] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.841837] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aeb1ff8!
[ 51.848777] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.861197] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aeb2058!
[ 51.868653] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.881112] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aebaec0!
[ 51.888045] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.900461] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aebaf20!
[ 51.907397] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.919881] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aec3d88!
[ 51.927047] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.939802] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aec3de8!
[ 51.946785] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.959212] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aeccc50!
[ 51.966164] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.978576] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aecccb0!
[ 51.985532] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 51.998509] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aed5b18!
[ 52.005484] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 52.018616] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aed5b78!
[ 52.025649] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 52.038069] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aede9e0!
[ 52.045017] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 52.057475] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aedea40!
[ 52.064924] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 52.077378] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aee78a8!
[ 52.084309] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 52.096726] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aee7908!
[ 52.103670] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 52.116084] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aef0770!
[ 52.123303] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 52.136109] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aef07d0!
[ 52.143082] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 52.155487] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aef9638!
[ 52.162432] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x60/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 52.174841] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aef9698!
[ 52.181759] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x78/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 52.194394] RTMP_AllTimerListRelease: Cancel timer obj ffffff800b36cd98!
[ 52.201375] RTMP_AllTimerListRelease: Timer is allocated by RedInit+0x120/0x1a8 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b36dbe0,State:0
[ 52.214606] <---HwCtrlThread
[ 52.217641] extif_put_dev(ra0)
[ 52.220806] mtk_ppe_dev_unregister_hook : ineterface ra0 set null (1)
[ 52.267322] device rai0 entered promiscuous mode
[ 52.276100] br-lan: port 3(rai0) entered forwarding state
[ 52.281598] br-lan: port 3(rai0) entered forwarding state
[ 53.801191] no net device found for eth0 or
[ 53.805646] no net device found for rax0 or apclix0
[ 53.810681] no net device found for rax1 or apclix0
[ 53.815666] no net device found for rax2 or apclix0
[ 53.820632] no net device found for wlan0 or wlan-apcli0
[ 53.826418] no net device found for apclix0
[ 53.830713] no net device found for wlan-apcli0
[ 53.870688] Mac: c8:9e:43:fd:d7:33 was aleady existed.
[ 53.875917] Mac: c8:9e:43:fd:d7:32 was aleady existed.
[ 53.881229] Mac: c8:9e:43:fd:d7:32 was aleady existed.
[ 53.886660] Mac: ce:8e:43:fd:d7:32 was aleady existed.
[ 53.892222] Mac: c8:9e:43:fd:d7:32 was aleady existed.
[ 53.897532] Mac: c8:9e:43:fd:d7:32 was aleady existed.
[ 53.902873] Mac: c8:9e:43:fd:d7:32 was aleady existed.
[ 53.908232] add tx_src: ce:9e:43:fd:d7:33
[ 54.283294] br-lan: port 3(rai0) entered forwarding state
[ 54.587389] Disable GAS service for MBSSID[2]
[ 54.591784] Unknow Parameter:8
[ 54.595357] Disable GAS service for MBSSID[0]
[ 54.599740] Unknow Parameter:8
[ 54.603022] Set_AP_VENDOR_SPECIFIC_IE: Unknown OUIType = 16
[ 54.609009] Set_AP_VENDOR_SPECIFIC_IE: Unknown OUIType = 9
[ 54.614650] set_wapp_cmm_ie: Unknown IE(EID = 111)
[ 54.619575] ap_ftkd> FT_KDP_CryptKeySet: FT KDP is not init!
[ 54.625255] set_wapp_cmm_ie: Unknown IE(EID = 110)
[ 54.630761] Set_AP_VENDOR_SPECIFIC_IE: Unknown OUIType = 16
[ 54.636367] Set_AP_VENDOR_SPECIFIC_IE: Unknown OUIType = 9
[ 54.641939] ap_ftkd> FT_KDP_CryptKeySet: FT KDP is not init!
[ 54.647655] ap_ftkd> FT_KDP_CryptKeySet: FT KDP is not init!
[ 54.653721] set_wapp_cmm_ie: Unknown IE(EID = 111)
[ 54.658750] set_wapp_cmm_ie: Unknown IE(EID = 110)
[ 59.742178] module exit
[ 60.551812] Set_MapR2_Proc MAP R2 is already disabled
[ 60.559074] Set_MapTS_Proc MAP TS is already disabled
[ 60.584471] Set_MapR2_Proc MAP R2 is already disabled
[ 60.591909] Set_MapTS_Proc MAP TS is already disabled
[ 60.617896] Set_Map_Proc current MAP MODE is 0
[ 60.642386] Set_Map_Proc current MAP MODE is 0
[ 63.199023] Disable GAS service for MBSSID[2]
[ 63.203673] Unknow Parameter:8
[ 63.206928] ap_ftkd> FT_KDP_CryptKeySet: FT KDP is not init!
[ 63.212803] ap_ftkd> FT_KDP_CryptKeySet: FT KDP is not init!
[ 63.218530] ap_ftkd> FT_KDP_CryptKeySet: FT KDP is not init!
[ 63.224223] Disable GAS service for MBSSID[0]
[ 63.296840] Unknow Parameter:8
[ 63.300097] Set_AP_VENDOR_SPECIFIC_IE: Unknown OUIType = 16
[ 63.305763] Set_AP_VENDOR_SPECIFIC_IE: Unknown OUIType = 9
[ 63.311281] set_wapp_cmm_ie: Unknown IE(EID = 111)
[ 63.316088] set_wapp_cmm_ie: Unknown IE(EID = 110)
[ 63.320890] Set_AP_VENDOR_SPECIFIC_IE: Unknown OUIType = 16
[ 63.326473] Set_AP_VENDOR_SPECIFIC_IE: Unknown OUIType = 9
[ 63.331978] set_wapp_cmm_ie: Unknown IE(EID = 111)
[ 63.336787] set_wapp_cmm_ie: Unknown IE(EID = 110)
[ 63.350913] Set_Fh_Bss_Proc rai0 wdev->MAPCfg.DevOwnRole 0x0
[ 63.366066] Set_Fh_Bss_Proc rai0 wdev->MAPCfg.DevOwnRole 0x20
[ 64.307388] SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 0, duty: 100
[ 64.314457] MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 0
[ 64.320578] MtCmdThermalProtectDutyCfg: duty: 100
[ 64.334980] SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 1, duty: 90
[ 64.341975] MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 1
[ 64.348073] MtCmdThermalProtectDutyCfg: duty: 90
[ 64.362192] SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 2, duty: 80
[ 64.369192] MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 2
[ 64.375299] MtCmdThermalProtectDutyCfg: duty: 80
[ 64.389402] SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 3, duty: 60
[ 64.396391] MtCmdThermalProtectDutyCfg: band_idx: 0, level_idx: 3
[ 64.402490] MtCmdThermalProtectDutyCfg: duty: 60
[ 64.416668] SetThermalProtectDisable(): band_idx: 0, protection_type: 1, trigger_type: 1
[ 64.424788] MtCmdThermalProtectDisable: band_idx: 0, protect_type: 1
[ 64.431146] MtCmdThermalProtectDisable: trigger_type: 1
[ 64.445952] SetThermalProtectDisable(): band_idx: 0, protection_type: 2, trigger_type: 1
[ 64.454076] MtCmdThermalProtectDisable: band_idx: 0, protect_type: 2
[ 64.460442] MtCmdThermalProtectDisable: trigger_type: 1
[ 64.465812] (Thermal Protect) Radio Notify.
[ 64.469995] band_idx: 0, level_idx: 0
[ 64.483018] SetThermalProtectEnable(): band_idx: 0, protection_type: 1, trigger_type: 1
[ 64.491055] SetThermalProtectEnable(): trigger_temp: 122, restore_temp: 116, recheck_time: 60
[ 64.499592] MtCmdThermalProtectEnable: band_idx: 0, protect_type: 1
[ 64.505863] MtCmdThermalProtectEnable: trigger_type: 1, trigger_temp: 122
[ 64.512663] MtCmdThermalProtectEnable: restore_temp: 116, recheck_time: 60
[ 64.529142] SetThermalProtectEnable(): band_idx: 0, protection_type: 2, trigger_type: 1
[ 64.537205] SetThermalProtectEnable(): trigger_temp: 125, restore_temp: 0, recheck_time: 60
[ 64.545568] MtCmdThermalProtectEnable: band_idx: 0, protect_type: 2
[ 64.551857] MtCmdThermalProtectEnable: trigger_type: 1, trigger_temp: 125
[ 64.558650] MtCmdThermalProtectEnable: restore_temp: 0, recheck_time: 60
[ 64.565511] (Thermal Protect) Radio Notify.
[ 64.569693] band_idx: 0, level_idx: 0
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment